I am trying to run ./TTS/bin/train_tacotron.py with GPU in Powershell.
I followed these instructions, which got me pretty far: the config is read, the model restored, but as training is about to start, I get the message:
UserWarning: NVIDIA GeForce RTX 3060 Ti with CUDA capability sm_86 is not compatible with the current PyTorch installation. The current PyTorch install supports CUDA capabilities sm_37 sm_50 sm_60 sm_61 sm_70 sm_75 compute_37.
If you want to use the NVIDIA GeForce RTX 3060 Ti GPU with PyTorch, please check the instructions at https://pytorch.org/get-started/locally/
The instructions specified don't really help. I tried installing the most recent stable version of PyTorch, as well as trying 1.7.1 (as opposed to 1.8.0 as recommended in the instructions I linked), but I got the same message.
How can I get this to run on my GPU?
Side note: I was successfully able to run training on my GPU in WSL, but it froze after a few hundred epochs, so I wanted to try Powershell to see if it made a difference.
In order to work properly with your current CUDA version, you need to specify the version 11.3 to cudatoolkit. Execute the following commands:
conda uninstall cudatoolkit
conda install cudatoolkit=11.3 -c pytorch
Related
My laptop System is Win10, with GPU NVIDIA Quadro RTX3000.
While trying to set up the TensorFlow with GPU, it always can't recognize my GPU.
What is the proper configuration for CUDA/CUDNN/Tensorflow etc.?
I did suffer a while before making it works.
Here is my configuration:
Win10
RTX 3000
Nvidia driver version 456.71
cuda_11.0.3_451.82_win10 (can't works with 11.1 version, not sure why)
cudnn -v8.0.4.30
Python 3.8.7
Tensorflow 2.5.0-dev20210106 (2.4 don't support cuda 11.x)
For future reference, You could have simply installed Anaconda on windows and run the command conda install -c anaconda tensorflow-gpu which would install the required CUDA, Tensorflow, CUDNN (correct versions) while forming a separate environment to effortlessly install Tensorflow.
It's the easiest solution, one that works out-of-the box and automates all the tasks.
I have installed both tensorflow 2.2.0 and tensorflow 1.15.0(by pip install tensorflow-gpu==1.15.0). The tensorflow 2 is installed in the base environment of Anaconda 3, while the tensorflow 1 is installed in a separate environment.
The tensorflow 2.2.0 can recognize gpu based on a simple test:
if tf.test.gpu_device_name():
print('Default GPU Device: {}'.format(tf.test.gpu_device_name()))
//output: Default GPU Device: /device:GPU:0
But the tensorflow 1.15.0 can not detect gpu.
For your information, my system environment is python + cuda 10.1 + vs 2015.
The tensosflow versions 1.15.0 to 1.15.3 (the latest version) are all compiled against Cuda 10.0. Downgrading the cuda 10.1 to cuda 10.0 solved the problem.
Also be aware of the python version. It is recommended to install the tensorflow .whl file (as listed at https://nero-mirror.stanford.edu/pypi/simple/tensorflow-gpu/) for the specific python version. As for installation, see How do I install a Python package with a .whl file?
Tensorflow 1.15 expects cuda 10.0 , but I managed to make it work with cuda 10.1 by installing the following packages with Anaconda: cudatoolkit (10.0) and cudnn (7.6.5). So, after running
conda install cudatoolkit=10.0
conda install cudnn=7.6.5
tensorflow 1.15 was able to find and use GPU (which is using cuda 10.1).
PS: I understand your environment is Windows based, but this question pops on Google for the same problem happening on Linux (where I tested this solution). Might be useful also on Windows.
It might have to do with the version compatibility of TF, Cuda and CuDNN. This post has it discussed thoroughly.
Have you tried installing Anaconda? it downloads all the requirements and make it easy for you with just a few clicks.
i've imported tensorflow gpu, but pycharm doesn't recognize it
details:
IDE -pycharm
GPU- grid p40-1Q
cuda - 8
cudnn - 7.1
python - 3.5
i'm getting this message:
Have you checked with
nvidia-smi
and see if your graphic driver is working? Also, have you checked the version of your tensorflow-gpu ? check for compatible configurations here https://www.tensorflow.org/install/source#tested_source_configurations
I tried with the following configuration on pycharm with windows 10 and it worked!!
Anaconda navigator with python 3.6.8
CUDA 9.0
CUDNN 7.1
Nvidia GeForce 1050 Ti GPU
Follow the instructions mentioned in https://stackoverflow.com/a/51307381/2562870
Note : this question was initially asked on github, but it was asked to be here instead
I'm having trouble running tensorflow on gpu, and it does not seems to be the usual cuda's configuration problem, because everything seems to indicate cuda is properly setup.
The main symptom: when running tensorflow, my gpu is not detected (the code being run, and its output).
What differs from usual issues is that cuda seems properly installed and running ./deviceQuery from cuda samples is successful (output).
I have two graphical cards:
an old GTX 650 used for my monitors (I don't want to use that one with tensorflow)
a GTX 1060 that I want to dedicate to tensorflow
I use:
tensorflow-1.0.0
cuda-8.0 (ls -l /usr/local/cuda/lib64/libcud*)
cudnn-5.1.10
python-2.7.12
nvidia-drivers-375.26 (this was installed by cuda and replaced my distro driver package)
I've tried:
adding /usr/local/cuda/bin/ to $PATH
forcing gpu placement in tensorflow script using with tf.device('/gpu:1'): (and with tf.device('/gpu:0'): when it failed, for good measure)
whitelisting the gpu I wanted to use with CUDA_VISIBLE_DEVICES, in case the presence of my old unsupported card did cause problems
running the script with sudo (because why not)
Here are the outputs of nvidia-smi and nvidia-debugdump -l, in case it's useful.
At this point, I feel like I have followed all the breadcrumbs and have no idea what I could try else. I'm not even sure if I'm contemplating a bug or a configuration problem. Any advice about how to debug this would be greatly appreciated. Thanks!
Update: with the help of Yaroslav on github, I gathered more debugging info by raising log level, but it doesn't seem to say much about the device selection : https://gist.github.com/oelmekki/760a37ca50bf58d4f03f46d104b798bb
Update 2: Using theano detects gpu correctly, but interestingly it complains about cuDNN being too recent, then fallback to cpu (code ran, output). Maybe that could be the problem with tensorflow as well?
From the log output, it looks like you are running the CPU version of TensorFlow (PyPI: tensorflow), and not the GPU version (PyPI: tensorflow-gpu). Running the GPU version would either log information about the CUDA libraries, or an error if it failed to load them or open the driver.
If you run the following commands, you should be able to use the GPU in subsequent runs:
$ pip uninstall tensorflow
$ pip install tensorflow-gpu
None of the other answers here worked for me. After a bit of tinkering I found that this fixed my issues when dealing with Tensorflow built from binary:
Step 0: Uninstall protobuf
pip uninstall protobuf
Step 1: Uninstall tensorflow
pip uninstall tensorflow
pip uninstall tensorflow-gpu
Step 2: Force reinstall Tensorflow with GPU support
pip install --upgrade --force-reinstall tensorflow-gpu
Step 3: If you haven't already, set CUDA_VISIBLE_DEVICES
So for me with 2 GPUs it would be
export CUDA_VISIBLE_DEVICES=0,1
In my case:
pip3 uninstall tensorflow
is not enough. Because when reinstall with:
pip3 install tensorflow-gpu
It is still reinstall tensorflow with cpu not gpu.
So, before install tensorflow-gpu, I tried to remove all related tensor folders in site-packages uninstall protobuf, and it works!
For conclusion:
pip3 uninstall tensorflow
Remove all tensor folders in ~\Python35\Lib\site-packages
pip3 uninstall protobuf
pip3 install tensorflow-gpu
Might seem dumb but a sudo reboot has fixed the exact same problem for me and a couple others.
The answer that saved my day came from Mark Sonn. Simply add this to .bashrc and
source ~/.bashrc if you are on Linux:
export CUDA_VISIBLE_DEVICES=0,1
Previously I had to use this workaround to get tensorflow recognize my GPU:
import tensorflow as tf
gpus = tf.config.experimental.list_physical_devices(device_type="GPU")
tf.config.experimental.set_visible_devices(devices=gpus[0], device_type="GPU")
tf.config.experimental.set_memory_growth(device=gpus[0], enable=True)
Even though the code still worked, adding these lines every time is clearly not something I would want.
My version of tensorflow was built from source according to the documentation to get v2.3 support CUDA 10.2 and cudnn 7.6.5.
If anyone having trouble with that, I suggest doing a quick skim over the docs. Took 1.5 hours to build with bazel. Make sure you have gcc7 and bazel installed.
This error may be caused by your GPU's compute capability, CUDA officially supports GPU's compute capability within 3.5 ~ 5.0, you can check here: https://en.wikipedia.org/wiki/CUDA
In my case, the error was like this:
Ignoring visible gpu device (device: 0, name: GeForce GT 640M, pci bus id: 0000:01:00.0, compute capability: 3.0) with Cuda compute capability 3.0. The minimum required Cuda capability is 3.5.
For now we can only compile from source code on Linux (or mac OS) to break the '3.5~5.0' limit.
There are various system incompatible problems.
The requirement for libraries can vary from the version of TensorFlow.
During using python in interactive mode a lot of useful information is printing into stderr. What I suggest for TensorFlow with version 2.0 or more to call:
python3.8 -c "import tensorflow as tf; print('tf version:', tf.version); tf.config.list_physical_devices()"
After this command, you will observe missing libraries (or a version of it) for work with GPU in addition to requirements:
https://www.tensorflow.org/install/gpu#software_requirements
https://www.tensorflow.org/install/gpu#hardware_requirements
p.s. CUDA_VISIBLE_DEVICES should not have a real connection with TensorFlow, or it's more general - it's a way to customize available GPUs for all launched processes.
For anaconda users. I installed tensorflow-gpu via GUI using Anaconda Navigator and configured NVIDIA GPU as in tensorflow guide but tensorflow couldn't find the GPU anyway. Then I uninstalled tensorflow, always via GUI (see here) and reinstalled it via command line in an anaconda prompt issuing:
conda install -c anaconda tensorflow-gpu
and then tensorflow could find the GPU correctly.
I've tried tensorflow on both cuda 7.5 and 8.0, w/o cudnn (my GPU is old, cudnn doesn't support it).
When I execute device_lib.list_local_devices(), there is no gpu in the output. Theano sees my gpu, and works fine with it, and examples in /usr/share/cuda/samples work fine as well.
I installed tensorflow through pip install. Is my gpu too old for tf to support it? gtx 460
I came across this same issue in jupyter notebooks. This could be an easy fix.
$ pip uninstall tensorflow
$ pip install tensorflow-gpu
You can check if it worked with:
tf.test.gpu_device_name()
Update 2020
It seems like tensorflow 2.0+ comes with gpu capabilities therefore
pip install tensorflow should be enough
Summary:
check if tensorflow sees your GPU (optional)
check if your videocard can work with tensorflow (optional)
find versions of CUDA Toolkit and cuDNN SDK, compatible with your tf version
install CUDA Toolkit
install cuDNN SDK
pip uninstall tensorflow; pip install tensorflow-gpu
check if tensorflow sees your GPU
* source - https://www.tensorflow.org/install/gpu
Detailed instruction:
check if tensorflow sees your GPU (optional)
from tensorflow.python.client import device_lib
def get_available_devices():
local_device_protos = device_lib.list_local_devices()
return [x.name for x in local_device_protos]
print(get_available_devices())
# my output was => ['/device:CPU:0']
# good output must be => ['/device:CPU:0', '/device:GPU:0']
check if your card can work with tensorflow (optional)
my PC: GeForce GTX 1060 notebook (driver version - 419.35), windows 10, jupyter notebook
tensorflow needs Compute Capability 3.5 or higher. (https://www.tensorflow.org/install/gpu#hardware_requirements)
https://developer.nvidia.com/cuda-gpus
select "CUDA-Enabled GeForce Products"
result - "GeForce GTX 1060 Compute Capability = 6.1"
my card can work with tf!
find versions of CUDA Toolkit and cuDNN SDK, that you need
a) find your tf version
import sys
print (sys.version)
# 3.6.4 |Anaconda custom (64-bit)| (default, Jan 16 2018, 10:22:32) [MSC v.1900 64 bit (AMD64)]
import tensorflow as tf
print(tf.__version__)
# my output was => 1.13.1
b) find right versions of CUDA Toolkit and cuDNN SDK for your tf version
https://www.tensorflow.org/install/source#linux
* it is written for linux, but worked in my case
see, that tensorflow_gpu-1.13.1 needs: CUDA Toolkit v10.0, cuDNN SDK v7.4
install CUDA Toolkit
a) install CUDA Toolkit 10.0
https://developer.nvidia.com/cuda-toolkit-archive
select: CUDA Toolkit 10.0 and download base installer (2 GB)
installation settings: select only CUDA
(my installation path was: D:\Programs\x64\Nvidia\Cuda_v_10_0\Development)
b) add environment variables:
system variables / path must have:
D:\Programs\x64\Nvidia\Cuda_v_10_0\Development\bin
D:\Programs\x64\Nvidia\Cuda_v_10_0\Development\libnvvp
D:\Programs\x64\Nvidia\Cuda_v_10_0\Development\extras\CUPTI\libx64
D:\Programs\x64\Nvidia\Cuda_v_10_0\Development\include
install cuDNN SDK
a) download cuDNN SDK v7.4
https://developer.nvidia.com/rdp/cudnn-archive (needs registration, but it is simple)
select "Download cuDNN v7.4.2 (Dec 14, 2018), for CUDA 10.0"
b) add path to 'bin' folder into "environment variables / system variables / path":
D:\Programs\x64\Nvidia\cudnn_for_cuda_10_0\bin
pip uninstall tensorflow
pip install tensorflow-gpu
check if tensorflow sees your GPU
- restart your PC
- print(get_available_devices())
- # now this code should return => ['/device:CPU:0', '/device:GPU:0']
If you are using conda, you might have installed the cpu version of the tensorflow. Check package list (conda list) of the environment to see if this is the case . If so, remove the package by using conda remove tensorflow and install keras-gpu instead (conda install -c anaconda keras-gpu. This will install everything you need to run your machine learning codes in GPU. Cheers!
P.S. You should check first if you have installed the drivers correctly using nvidia-smi. By default, this is not in your PATH so you might as well need to add the folder to your path. The .exe file can be found at C:\Program Files\NVIDIA Corporation\NVSMI
When I look up your GPU, I see that it only supports CUDA Compute Capability 2.1. (Can be checked through https://developer.nvidia.com/cuda-gpus) Unfortunately, TensorFlow needs a GPU with minimum CUDA Compute Capability 3.0.
https://www.tensorflow.org/get_started/os_setup#optional_install_cuda_gpus_on_linux
You might see some logs from TensorFlow checking your GPU, but ultimately the library will avoid using an unsupported GPU.
The following worked for me, hp laptop. I have a Cuda Compute capability
(version) 3.0 compatible Nvidia card. Windows 7.
pip3.6.exe uninstall tensorflow-gpu
pip3.6.exe uninstall tensorflow-gpu
pip3.6.exe install tensorflow-gpu
I had a problem because I didn't specify the version of Tensorflow so my version was 2.11. After many hours I found that my problem is described in install guide:
Caution: TensorFlow 2.10 was the last TensorFlow release that supported GPU on native-Windows. Starting with TensorFlow 2.11, you will need to install TensorFlow in WSL2, or install tensorflow-cpu and, optionally, try the TensorFlow-DirectML-Plugin
Before that, I read most of the answers to this and similar questions. I followed #AndrewPt answer. I already had installed CUDA but updated the version just in case, installed cudNN, and restarted the computer.
The easiest solution for me was to downgrade to 2.10 (you can try different options mentioned in the install guide). I first uninstalled all of these packages (probably it's not necessary, but I didn't want to see how pip messed up versions at 2 am):
pip uninstall keras
pip uninstall tensorflow-io-gcs-filesystem
pip uninstall tensorflow-estimator
pip uninstall tensorflow
pip uninstall Keras-Preprocessing
pip uninstall tensorflow-intel
because I wanted only packages required for the old version, and I didn't do it for all required packages for 2.11 version. After that I installed tensorflow 2.10:
pip install tensorflow<2.11
and it worked.
I used this code to check if GPU is visible:
import tensorflow as tf
print(tf.config.list_physical_devices('GPU'))
So as of 2022-04, the tensorflow package contains both CPU and GPU builds. To install a GPU build, search to see what's available:
λ conda search tensorflow
Loading channels: done
# Name Version Build Channel
tensorflow 0.12.1 py35_1 conda-forge
tensorflow 0.12.1 py35_2 conda-forge
tensorflow 1.0.0 py35_0 conda-forge
…
tensorflow 2.5.0 mkl_py39h1fa1df6_0 pkgs/main
tensorflow 2.6.0 eigen_py37h37bbdb1_0 pkgs/main
tensorflow 2.6.0 eigen_py38h63d3545_0 pkgs/main
tensorflow 2.6.0 eigen_py39h855417c_0 pkgs/main
tensorflow 2.6.0 gpu_py37h3e8f0e3_0 pkgs/main
tensorflow 2.6.0 gpu_py38hc0e8100_0 pkgs/main
tensorflow 2.6.0 gpu_py39he88c5ba_0 pkgs/main
tensorflow 2.6.0 mkl_py37h9623b36_0 pkgs/main
tensorflow 2.6.0 mkl_py38hdc16138_0 pkgs/main
tensorflow 2.6.0 mkl_py39h31650da_0 pkgs/main
You can see that there are builds of TF 2.6.0 that support Python 3.7, 3.8 and 3.9, and that are built for MKL (Intel CPU), Eigen, or GPU.
To narrow it down, you can use wildcards in the search. This will find any Tensorflow 2.x version that is built for GPU, for instance:
λ conda search tensorflow=2*=gpu*
Loading channels: done
# Name Version Build Channel
tensorflow 2.0.0 gpu_py36hfdd5754_0 pkgs/main
tensorflow 2.0.0 gpu_py37h57d29ca_0 pkgs/main
tensorflow 2.1.0 gpu_py36h3346743_0 pkgs/main
tensorflow 2.1.0 gpu_py37h7db9008_0 pkgs/main
tensorflow 2.5.0 gpu_py37h23de114_0 pkgs/main
tensorflow 2.5.0 gpu_py38h8e8c102_0 pkgs/main
tensorflow 2.5.0 gpu_py39h7dc34a2_0 pkgs/main
tensorflow 2.6.0 gpu_py37h3e8f0e3_0 pkgs/main
tensorflow 2.6.0 gpu_py38hc0e8100_0 pkgs/main
tensorflow 2.6.0 gpu_py39he88c5ba_0 pkgs/main
To install a specific version in an otherwise empty environment, you can use a command like:
λ conda activate tf
(tf) λ conda install tensorflow=2.6.0=gpu_py39he88c5ba_0
…
The following NEW packages will be INSTALLED:
_tflow_select pkgs/main/win-64::_tflow_select-2.1.0-gpu
…
cudatoolkit pkgs/main/win-64::cudatoolkit-11.3.1-h59b6b97_2
cudnn pkgs/main/win-64::cudnn-8.2.1-cuda11.3_0
…
tensorflow pkgs/main/win-64::tensorflow-2.6.0-gpu_py39he88c5ba_0
tensorflow-base pkgs/main/win-64::tensorflow-base-2.6.0-gpu_py39hb3da07e_0
…
As you can see, if you install a GPU build, it will automatically also install compatible cudatoolkit and cudnn packages. You don't need to manually check versions for compatibility, or manually download several gigabytes from Nvidia's website, or register as a developer, as it says in other answers or on the official website.
After installation, confirm that it worked and it sees the GPU by running:
λ python
Python 3.9.12 (main, Apr 4 2022, 05:22:27) [MSC v.1916 64 bit (AMD64)] :: Anaconda, Inc. on win32
Type "help", "copyright", "credits" or "license" for more information.
>>> import tensorflow as tf
>>> tf.__version__
'2.6.0'
>>> tf.config.list_physical_devices()
[PhysicalDevice(name='/physical_device:CPU:0', device_type='CPU'), PhysicalDevice(name='/physical_device:GPU:0', device_type='GPU')]
Getting conda to install a GPU build and other packages you want to use is another story, however, because there are a lot of package incompatibilities for me. I think the best you can do is specify the installation criteria using wildcards and cross your fingers.
This tries to install any TF 2.x version that's built for GPU and that has dependencies compatible with Spyder and matplotlib's dependencies, for instance:
λ conda install tensorflow=2*=gpu* spyder matplotlib
For me, this ended up installing a two year old GPU version of tensorflow:
matplotlib pkgs/main/win-64::matplotlib-3.5.1-py37haa95532_1
spyder pkgs/main/win-64::spyder-5.1.5-py37haa95532_1
tensorflow pkgs/main/win-64::tensorflow-2.1.0-gpu_py37h7db9008_0
I had previously been using the tensorflow-gpu package, but that doesn't work anymore. conda typically grinds forever trying to find compatible packages to install, and even when it's installed, it doesn't actually install a gpu build of tensorflow or the CUDA dependencies:
λ conda list
…
cookiecutter 1.7.2 pyhd3eb1b0_0
cryptography 3.4.8 py38h71e12ea_0
cycler 0.11.0 pyhd3eb1b0_0
dataclasses 0.8 pyh6d0b6a4_7
…
tensorflow 2.3.0 mkl_py38h8557ec7_0
tensorflow-base 2.3.0 eigen_py38h75a453f_0
tensorflow-estimator 2.6.0 pyh7b7c402_0
tensorflow-gpu 2.3.0 he13fc11_0
I have had an issue where I needed the latest TensorFlow (2.8.0 at the time of writing) with GPU support running in a conda environment. The problem was that it was not available via conda. What I did was
conda install cudatoolkit==11.2
pip install tensorflow-gpu==2.8.0
Although I've cheched that the cuda toolkit version was compatible with the tensorflow version, it was still returning an error, where libcudart.so.11.0 was not found. As a result, GPUs were not visible. The remedy was to set environmental variable LD_LIBRARY_PATH to point to your anaconda3/envs/<your_tensorflow_environment>/lib with this command
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/<user>/anaconda3/envs/<your_tensorflow_environment>/lib
Unless you make it permanent, you will need to create this variable every time you start a terminal prior to a session (jupyter notebook). It can be conveniently automated by following this procedure from conda's official website.
In my case, I had a working tensorflow-gpu version 1.14 but suddenly it stopped working. I fixed the problem using:
pip uninstall tensorflow-gpu==1.14
pip install tensorflow-gpu==1.14
I experienced the same problem on my Windows OS. I followed tensorflow's instructions on installing CUDA, cudnn, etc., and tried the suggestions in the answers above - with no success.
What solved my issue was to update my GPU drivers. You can update them via:
Pressing windows-button + r
Entering devmgmt.msc
Right-Clicking on "Display adapters" and clicking on the "Properties" option
Going to the "Driver" tab and selecting "Updating Driver".
Finally, click on "Search automatically for updated driver software"
Restart your machine and run the following check again:
from tensorflow.python.client import device_lib
local_device_protos = device_lib.list_local_devices()
[x.name for x in local_device_protos]
Sample output:
2022-01-17 13:41:10.557751: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1640] Found device 0 with properties:
name: GeForce 940MX major: 5 minor: 0 memoryClockRate(GHz): 1.189
pciBusID: 0000:01:00.0
2022-01-17 13:41:10.558125: I tensorflow/stream_executor/platform/default/dlopen_checker_stub.cc:25] GPU libraries are statically linked, skip dlopen check.
2022-01-17 13:41:10.562095: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1763] Adding visible gpu devices: 0
2022-01-17 13:45:11.392814: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1181] Device interconnect StreamExecutor with strength 1 edge matrix:
2022-01-17 13:45:11.393617: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1187] 0
2022-01-17 13:45:11.393739: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1200] 0: N
2022-01-17 13:45:11.401271: I tensorflow/core/common_runtime/gpu/gpu_device.cc:1326] Created TensorFlow device (/device:GPU:0 with 1391 MB memory) -> physical GPU (device: 0, name: GeForce 940MX, pci bus id: 0000:01:00.0, compute capability: 5.0)
>>> [x.name for x in local_device_protos]
['/device:CPU:0', '/device:GPU:0']