I am trying to see the files of particular branch of my repo. How can I open that file in intellij.
When I am trying to open repo in intellij it is showing code of master branch.
pls Help!!
One quick option here, which doesn't require actually checking out another branch, would be to right click the file of interest and then choose:
Git => Compare with branch...
This will bring up a dialog listing all branches for your current repository. You may choose the branch of interest. This in turn will launch a side-by-side window showing both the version from the current branch (presumably master) right next to the version from the branch you have chosen.
Going this route might actually be what you want, if your intention be to compare a given file in the current branch against a version in another branch.
Hi if you have multiple branches exp.- branch1, branch2,branch3
and you can open a particular branch file,
checkout particular branch & open file easily
CMD= git checkout branch1
Related
When working on a branch together with colleagues, I find it useful to limit IntelliJ IDEA's Git Log view to the local branch I'm working on plus the remote tracking branch. This way, I see all the commits that are relevant to working on this branch.
Every time I switch branches and want to get that filter, I manually select HEAD and the remote branch. I found no way to tell IDEA to always select the current branch and its remote tracking branch.
Is there a way to let the Git Log view select "the current branch's remote tracking branch" once, and have it automatically pick the right remote branch when I checkout another local branch?
I'm currently using IntelliJ IDEA 2019.3.4, but will likely update to 2020 soon.
You can update to 2020 and check new Branches Dashboard under Log tab in Git tool window.
Then you can select local and remote branches and you will get log filtered.
Please see what's new in 2020 here:
https://www.jetbrains.com/idea/whatsnew/#version-control
Also please see and vote:
https://youtrack.jetbrains.com/issue/IDEA-233730
I am working on a project, using Fossil for version controlling and organizing it. I have some branches other than my main trunk branch, and want to update (commit) only a single branch. Doing commit will push my changes on a branch to the main Files (i am hosting my project on Chiselapp)
. How is it possible to update or commit only a single branch without affecting the main files?
A commit only ever affects a single branch. Except perhaps after merging two branches, but I'm assuming you haven't been doing that.
The only thing I can think of is that the skin you're using has a "Files" menu item that links to dir?ci=tip. The tip is a special name for the most recent commit. Which means that, if you make a commit in a different branch than trunk, that "Files" menu item will now show you the files of that other branch.
The hackish temporary way to fix that is to make a commit in trunk afterwards, so that tip refers to trunk again. But that's not ideal.
The easiest way to permanently fix this, is by choosing a different skin which doesn't do that, or by editing your skin's header, and replacing the link to dir?ci=tip by another link, dir?ci=trunk for example. That way, that menu item will always show the files in the trunk branch.
Fossil unlike Git pushes/pulls all branches and tags at once*. The reason (apart from being by design) is that Fossil repository is a database, push/full synchronizes the database in the respective direction.
This means if you committed changes on several branches then all of them will be pushed to the remote.
*UNLESS, the changes are done on private branches (see fossil help for fossil commit --branch --private, fossil branch new --private).
Private commits/branches by default are excluded from push/pull. To also include these use --private option (see fossil help for fossil push --private).
Once the changes have been pushed, they are integrated in the remote repo and can be viewed in the remote repo's web-GUI as individual commits or via the branch to which they belong. The view includes the Files section that reflects the repo contents (snapshot) at the commit's version.
To answer your question: if you committed changes to existing trunk branch, they will be pushed to the remote trunk as well. If you don't want to make changes to the remote trunk, then make your changes in your new branch (to be pushed as a new branch) or in your private branch (will NOT be pushed by default).
I have shelved my 26 java files changes via Intellij Idea 2016.2.1 and I checkout to different branch.
When I came to old branch to check my shelved changes.
I gone a mad now, I lost all the files. I was worked nearly two months
Can somebody help to get it back?
You can restore the state of those files if they were edited in IntelliJ. Use local history to see all the changes made in IntelliJ (VCS -> Local History -> Show History).
Even there isn't Shelf tab in IDE you can find shelved changes as patch files at {ProjectName}/.idea/.idea.{ProjectName}/shelf/.idea/shelf.
Then your can apply any selected patch.
I was able to view lost changes and revert back to them by:
right click on project directory, select Local History > Show History
Find the entry in the history menu that you want to restore. You can examine the files by double clicking on the entry and the files to examine differences.
Right click on the entry you want to restore, and select Revert
Note in my case Git>VCS Operations>Show History showed nothing. Only through the Project Files menu.
Andrei's answer was helpful for my situation where I renamed my project and my previously shelved changes were no longer found under the shelf, but I did run into an issue when applying the patch file because I was prompted to "Select missing base" for various files in the patch. Similar to what is seen in the screenshot below:
https://youtrack.jetbrains.com/issue/IDEA-183910
I was able to avoid having to "Select missing base" for various files by first changing the default shelf location and then applying the patch.
https://www.jetbrains.com/help/idea/shelving-and-unshelving-changes.html#change-shelve-location
Also, I found my patch in this location:
{ProjectName}/.idea/shelf
instead of the aforementioned location:
{ProjectName}/.idea/.idea.{ProjectName}/shelf/.idea/shelf
Maybe this will help someone:
I lost part of my shelved changes in combination with an update of IntelliJ. I'm not sure if the update was the reason but eventually most of my most recent (and important) changes were gone.
I couldn't restore them from local history as this does not "survive" an update of IDEA. But in the files I saw that there still is some data:
C:\Users\myUser\AppData\Local\JetBrains\IntelliJIdea2021.2\LocalHistory had a changes.storageData with ~50MB.
Copying the files to the folder of the new version didn't help as the files got overwritten again.
Solution:
I was able to get the old version of IntelliJ (2021.2) here and installed it. This can be done in parallel, without removing the newer version.
Here I was able to retrieve my changes from the Local History and shelve or apply them again.
Hint: Backup the "Local History" folder (or the whole IntelliJIdea20xx.x folder) before you start. I don't remember if I had to copy it in there again or if it worked out of the box. (Just to be sure the local history doesn't get lost).
I've also experienced this bug repeatedly and hence no longer use shelved changes, but rather the Git CLI directly. As of 2022 Jetbrains IDE's still cannot be trusted with their "Smart Checkout" feature, which has a small probability of the total loss of your files (experienced personally in both IntelliJ & Rider).
Unlike another comment here regarding using the Local History, this did not work for me as the history showed nothing. I've also lost many hours of work due to this bug which remains unfixed.
The solution is to use "git stash -u" on the command line, then checkout the desired commit. Once youre done, type "git stash apply" to restore your files. Trusting the "smart checkout" feature is like playing Russian roullette. It's IDE magic that may just fail and you lose everything.
Specifically I have a repository setup in Launchpad. I need to remove this repository but didn't find any link to do that from launchpad website. I am wondering whether I could do it on my local branch using "bzr". Or I am missing something from the launchpad website to remove it.
To have your entire project deleted from Launchpad, you have to post a "question" on this page:
https://answers.launchpad.net/launchpad/+addquestion
Yeah it's weird. But this seems to be the official way. If you search for the keywords "delete project" on this page you will find many many similar requests:
https://answers.launchpad.net/launchpad
Make sure to include a detailed explanation why you want to do this and that you are aware of the consequences. Otherwise you will get a response along the lines "the community might still use the source code you want to delete" and so on.
Of course they are right, and you should carefully consider whether you really want to remove code that other folks might be using and linking to.
If you are sure you want the project gone, then you can reduce the turnaround time with the Launchpad team by first deleting all your branches. You might not be able to delete the trunk, in that case you can try to force-overwrite it with an empty branch, using these steps:
bzr init empty
cd empty
touch empty.txt
bzr add
bzr commit -m 'dummy commit'
bzr push lp:PROJECT --overwrite
Of course, replace PROJECT with the name of your project. All these steps are necessary to empty the branch. You cannot simply push an empty branch, Bazaar will tell you that No new revisions or tags to push. and the branch will be untouched. You need a completely new revision, like the dummy revision in this example.
If your project has no meaningful source code in it, the Launchpad team should not have any objections to delete it, so you can reduce the turnaround time.
I have local folder that is branch from formal_versions.
My workflow is:
Mkae changes and than commit them
The integrator merge them in his local branch.
The integrator push its local branch to formal_versions
I use pull to make my local branch identical to formal_versions
This is working fine.
However what should I do in the following scenario:
After pull from formal_versions , I compile the code. As a result , some workspace and obj file are changed (I.E date and time of compilation) and of cource , bazaar explorer inform me on modified files
I again want to make my branch mirror of formal version. What should I do?
A. Why using pull again says that "nothing to pull" even if
I use --overwrite switch ? it is suppose to make my local branch as mirror of the pulled branch...
B. Is my only option is to use revert working tree?
It is generally considered best practice (as well as good for one's sanity) not to version files that are the result of the build process. Executables, shared libraries, and even source files generated from by a 4GL are examples. You can ignore files by using bzr ignore <pattern>, for example bzr ignore *.exe. If the files are already versioned, you will also have to remove them using bzr remove.
bzr pull says there is nothing to pull because the formal version has had no new commits since your last pull.
If you must version the files in question, bzr revert is the only way I know of when bzr pull does not find new revisions. If there had been new revisions in the formal branch, the files should be updated (and will potentially be reported as conflicts).