I made sure every single thing is correct with the related file names and their content addresses and so on yet I always get stuck upon executing the !sudo line command which should open and use a given file, it returns this error :
"Error: Cannot read file '/content/-p': No such file or directory"
As I have already said, the file does exist and is located in my Google Drive, I even copy pasted its specific path to make sure I put it right and yet the issue is still there, why? how can I solve it?
Thanks in advance for any help.
Two scenarios in my experience:
(1) It's the first time running the lines of code after mounting your google drive and for no apparent reason it runs for tens of minutes, produces not output, raises an error (e.g. "File does not exist"), and the session crashes; you repeat the exact same steps, then it works.
(2) There are thousands (or more) files within the folder that contains the file you're trying to read or write; when a google drive folder contains many files (i.e. thousands or more) it may crash for that reason.
Related
We have a process in place built on Excel VBA that uploads a file to FTP Server. On the other side, our client downloads it. Very randomly, they complain that the file they received is blank (the file name is the same though). We then check at our end and see that the file that was uploaded was never blank. So here comes the problem: we're always arguing whether it was our error or theirs.
I figured that there might be a couple of reasons behind it but I have a few questions to ask before coming to conclusions:
If, say, the file was never uploaded (a possibility), what happens when the client runs a download process at their end? Can that download process generate a blank file with the same name as our output file? It sounds impossible to me but since the client is following up on this issue, I have to ask this silly question.
How does the mechanism work - what are the steps that happen on FTP server the moment my process completes uploading the file? I sometimes see that as soon as I upload the file, a 0kb file is created and then a second later (or less) the file with right size appears? Could it be possible that their process is running right before this actual file creation?
Thank you in advance for your help!
I'm trying to copy a file from a local computer to a remote share but I get an exception saying "Can't find the specified file".
My.Computer.FileSystem.CopyFile("C:\filename.jpg", "\\focserver2\consultoria\teste\filename.jpg")
The remote shared folder has full control permissions on "Everyone".
What am I doing wrong? Or it's not possible to copy to network paths using FileSystem.CopyFile ?
Thanks.
João
The issue does not appear to be the destination but the source. I assume that the sample you showed above is NOT the real code and in the real code, you combine a couple values together to define the source. To help prevent issues, get in the habit of using the Path.Combine() method when concatenating strings for a file path. It's a life-saver.
The next most important thing is to learn how to debug your code by setting break-points and seeing what the values of your combined strings are before posting to websites. This is a good one to get you started. http://weblogs.asp.net/scottgu/debugging-tips-with-visual-studio-2010
Most likely the problem is that you are trying to access the root folder of the C:\ drive. This folder is generally locked down by the operating system, and even simple file operations don't work easily there.
Try copying the file from a subfolder e.g.
My.Computer.FileSystem.CopyFile("C:\Temp\filename.jpg", "\\focserver2\consultoria\teste\filename.jpg")
So we have a client that creates "training packages" and then uploads them via ftp to their website. They create the training packages in PowerPoint, and then use some program to convert them into html/swf files and package them within a folder. When they upload, they use Filezilla, and just transfer the entire folder over. The folder is uniquely named, uses no spaces or special characters.
These files have uploaded fine for about a year. Recently, they've run into a problem. Whenever they try to upload training package folder, they are immediately presented with the "This file already exists, do you want to overwrite?" message. Except... the folder they're moving is brand new, and the file it's asking to overwrite DOESN'T EXIST. When they choose "Overwrite" the file looks like it transfers, but the file size is wrong, and the training package doesn't work correctly.
This happens with every training package they try to upload. It's not just a badly outputted package. Also, it's always the same file that has the problem--it's the main "player" for the training package, and though it contains different content for every package, it is the same file name (cplayer.swf) every time.
Things they've tried without success:
-Re-uploading the file again by itself, and overwriting
-Deleting the "bad" file and re-uploading the single file - Get the overwrite message again, even though the file DOES NOT EXIST.
-Renaming the file on the server and re-uploading the single file - Get the overwrite message.
-Renaming the single file locally within the package and uploading/renaming it - Won't let us rename because the file already exists.
-Used another FTP client - Same results as above, so not a client specific problem.
-Used a different FTP login - Same results as above, so not a permissions problem.
Other things of note:
-The file is small--it's not a time out problem. Plus, all other files upload fine, and some are a lot larger.
-They've emailed this file to me, and I've uploaded it successfully.
I am completely at my wits end. Does anyone have any ideas where I can at least troubleshoot a little further?
Thanks for the non-help, the downvote, and the general lack of response on what was a pretty serious issue for me.
In case anyone else has a similar problem, here's what was going on:
Virus software (specifically Malware Bytes) was blocking THIS ONE SINGLE FILE. All I had to do was exclude the folder that contained the file.
I'm trying to copy some files from local HD (journaled, of course) to a USB hard disk, partitioned with NTFS.
I'm simply using
[fileManager copyItemAtPath:src toPath:dest error:&err]
which works fine.
However, for some files (I didn't understand the relation between these files), when I try to delete them from the NTFS drive I get a Finder error
The operation could not be completed.
An unexpected error occurred (error code -50).
I tried to search the web, I read it may be a problem of illegal characters in the name ? / " | > *, but none of those characters is in the name of the files that give me the error (I didn't check for every file that gives me that error, also because I have hundreds of files, but one that gives that error every time is asdf.txt, thus I think it's not related to file names...).
Besides (I don't know if it's related or not), when the popup with the error appears I have, as you know, two choices. The file gets deleted even if I cancel the operation.
Any suggestion on how I can solve? (except, of course, not using a NTFS drive)
I'm using MacOSX 10.7.2 and Xcode 4.2.1.
Right now we have a program that opens all of the word files in a folder and adds some information to the footer. After switching from Windows XP and Word 2003 to Windows 7 and Word 2007 we have started getting the following error:
Run-time error '5096':
EOALPHABETICARABICARABICABJADARABICALPHABAHTTEXTCAPSCA
(c:\Users...\Content.MSO\8BE508C6.docx)
It occurs at random in any of the files (you can be 10 files in or 100). I thought that it might be a problem with the files being on a network drive so I modified the program to copy each file locally first, add the footer to that copy, and then copy it back out to the network. However, that didn't seem to work. I'm looking for any suggestions on how to fix the problem or possibly rewrite the solution. However, I need to keep the solution in VBA since this app is part of a bigger suite which in not ready for a .NET re-write.
As it turns out I was able to workaround this problem by copying the word files locally, running the main code on the local copies, then copying them back out to the network. It didn't seem to be working at first because the user's machine on which I tested it did not have the most recent version of the program.
Adding this note for those still looking for answers to this error...
I have a macro that creates several docs from one that is open based on sections in the main document.
I was getting the Run-time error '5096' and was an able to find any solutions that worked.
Upon further examination while debugging the code I discovered that while pulling data out of the main doc and building a file name that there was a carriage return after the file name and before the extension. After adding a replace statement to remove carriage returns I am able to process documents all day without an error.
I have found that the error is caused by the total number of characters in the file name is too long. This usually occurs when manipulating file names and the full path is set in the variable. I will manually chop pieces out of real long names to force it to work.
I suppose if I were smart, I'd move into the directory and just deal with the file names without the directory prepended to the name.