I'm building a Swiper of book covers, with the book title below. I'm using
slidesPerView: 'auto' in order to allow flexible width slides, but the problem I have is that sometimes the title is wider than the image, which looks strange. I don't want to specify a set width per slide, since book covers vary in size, but I do want the text below the image to wrap, constrained to the width of the image. I cannot figure out how to do both.
Related
If you specify dimensions in the style prop of an <Image> component in React Native, adding resizeMode={'contain'} causes the image to preserve its aspect ration and fit entirely in the box whose dimensions you've specified in style. It will also center the image horizontally and vertically within that box.
However, as far as I can tell, center does the same thing as contain. What's the difference?
The difference is how the image fits in the Image container.
Center: the image will be centered in the image container according to the size of the container. It will have uniform space on left, right and top, bottom sides because the image is centered.
Contain: the image is fitted inside the image container keeping the aspect ratio of the image. This means the image will touch the container walls from either width or height or both depending on which side is larger or smaller.
Container is the Image component itself.
In order to see the differences in action, give background color to the Image component.
See the expo slack to better understand it: https://snack.expo.io/#saadqbal/resizemode
From the official document it says:
center:
Center the image in the view along both dimensions. If the
image is larger than the view, scale it down uniformly so that it is
contained in the view.
contain:
Scale the image uniformly (maintain the image's aspect ratio) so that both dimensions (width and height) of the image will be
equal to or less than the corresponding dimension of the view (minus
padding).
To get the clear idea about it I would suggest a small trick.
Take a view of 50*50 and put image inside it. Now take rectangle(with more height) and square image. See the difference.
When you use contain it satisfies the following condition
Scale Image Width ≤ Image View Dimension Width
Scale Image Height ≤ Image View Dimension Height
When you use center if image is smaller than the view it will have empty spaces in both x and y directions depending on the image size.
If it is larger then ( unless if you specified the scale ) by default it scales down to contain in it ( this is the situation where it appears to be acting similar to contain )
If the image is larger than the view, scale it down uniformly so that it is contained in the view. Documetation
Check this explanation Understanding “resizeMode” in React Native by Mehran Khan
We have a typical bootstrap SPA that we turned into a React site.
In one of the sections there's an image that appears in the right side of the layout, and it spans the section vertically (takes up about 50% horizontally).
When the window is reduced in size, at some intermediary positions, the image no longer spans the section vertically, making it float above what looks like a margin or a frame, but in fact, it's just the background color of the section whose aspect ratio is not enough to hold the image completely.
Is there a way to prevent this? It seems like the only solution would be to pick images that are have aspect ratios that are more amenable to the half the grid position they are being given.
I have a 405x720 image that it is to cover the background image. I've noticed that it stretches the image if the device's screen is smaller than the image. (I'm using a Galaxy S4 to test my apps).
Here's what I have so far:
var fullView = Ti.UI.createImageView({
layout: 'vertical',
width: '100%',
height: '100%',
image: '/images/background.png'
});
I've heard about the clipping technique, however that is only available for iOS and I'd like to have it for both platforms. Is there a way to do this? Or should I try to resize it appropriately? Tips/Suggestions are appreciated!
You should use proper images according to the aspect ratio of screen you are going to run your app on.
You can do this by calculating the width-height ratio of device and then you can decide which image to show on.
But putting a single resolution image directly to cover up the whole screen
is never going to work.
To resize an image, you can use Ti.Blob class' methods after fetching your image using Ti.Filesystem
Also remember that putting an image on whole background takes lot of memory especially in Android. That's why most of the apps do not use complete image to cover up background, rather they use small images wherever necessary and fills up other areas by colors or gradients as required.
But if your requirement is only to use image in background then unload it as soon as you move to different screen and load it again as you are back on it.
Further points to keep note of:
If you set bg image on a View, then it will be fit to cover the dimension of a View. So, if you have a view of width/height to 100%, then image will be fit into it. It means that image size will depend on View's dimension, not the View dimension will depend on image size.
If you set image on ImageView, and suppose you have:
ImageView width = FILL to screen size of 720, then the image height will be automatically decided to keep the aspect ratio. It means that if you have an image of size width=720 and height=400, then the ImageView will be of width=FILL & height=400
Image of size width=1000 and height=800 & ImageView height = 400, then the ImageView will be of width=500 & height=400
The problem is that you're actually telling the image control to load the image on an object that is stretched to the entire width and height of the screen - and when the screen aspect ratio is different than the one you have cropped your image by then you get bad aspect ratio and image looks screwed up.
If you remove either the width or the height, than the aspect ratio of the image will be loaded.
When I want a background image what I found the best way is to make a square image, and then set my ImageView height to Ti.UI.FILL and my width to Ti.UI.SIZE - That way it shows good aspect ratio and side that dont "fit" the screen (width or height) are not shown.
i have some picture which is 675x503. I would like to make more width on it and let's say to 1024 and in height to 400. How to do that without cutting my image and keep quality? I just would like to have this image on my website top. I got photoshop 6. I tried with Image->image size but its not what i need.
If you don't want to cut the picture at all, this will distort the image due to different height and width ratios. If this is not an issue, you could simply hit ctrl(or cmd)+t when the layer with the picture is selected. It will let you resize and rotate the entire image. There is also an option in the Image -> Image Size menu called "Bicubic Sharper", found in the drop-down list at the bottom of the menu(Photoshop CS6). It's meant for image reduction and should also solve your problem.
I have a window. That window has a header (variable size) and should have a scrollable body that sits directly under the header. How can I set the height of the body so that it actually scrolls? If I set height: 'auto', the body extends beyond the bottom of the viewport to fit all of its content. If I set its top and bottom properties, nothing shows up at all.
I can't imagine that I'm the only one who's come across this, but I haven't found a single definitive answer for how to create properly sized, scrollable view within a window. Heights seem tricky since the value is so different in portrait and landscape modes on a single device, much less across devices.
Can someone provide tips on how to manage this scenario? I'm hoping I can extrapolate it to handle other view height scenarios.
Thanks.
It depends on what you are trying to achieve. If you're trying to create a ScrollView that just has the ability to scroll when empty, you should add a empty View into the ScrollView, which has the "top" property.
For example:
var win = Ti.UI.createWindow();
var scrollView = Ti.UI.createScrollView();
var emptyView = Ti.UI.createView({top: 460});
scrollView.add(emptyView)
win.add(scrollView);
Note that the "top" property has 460 set, which is 40 bigger than the iPhone screen res of "420". This will case the scrollView to scroll. If you're looking for a specific size based on the window's navBar controlTitle, you will have to run an equation based on what you think the size will be, applying that size to the view's "top" property accordingly.