So I tried installing expo CLI for my react native project. I tried installing it with npm as shown on the official expo.io website, but it didn't work out. So as per the answers from this stack overflow post. It installed with the command yarn global add expo-cli and I got to see this following output.
success Installed "expo-cli#4.0.13" with binaries:
- expo
- expo-cli
but to verify whether the installation was successful, I ran the command expo whoami and got the following error.
Command 'expo' not found, did you mean:
command 'exo' from snap exoscale-cli (v1.22.0)
command 'expr' from deb coreutils (8.30-3ubuntu2)
command 'expn' from deb sendmail-base (8.15.2-18)
See 'snap info <snapname>' for additional versions.
I'm on Ubuntu 20.04 LTS. I really don't know what's going on here and how can I get to run expo CLI successfully, a little help for your newbie fellow developer here.
Check if expo-cli is properly installed or not using the following code:
yarn global list
Check if expo-cli is added to your path or not using the following code. (Generally, it should be added automatically )
echo $PATH
This will show a list of folders. Look into these folder and try to find expo-cli. If that is not present there then export the path of expo-cli in your .bashrc ( or other dotfile ) using the following
export PATH=$PATH:~/PATH/TO/YOUR/EXPOCLI
Change the "PATH/TO/YOUR/EXPOCLI" to the path of your expo-cli.
If you're running Windows, follow these steps:
Follow this guide to access the PATH environment variable https://www.maketecheasier.com/what-is-the-windows-path/
Add an entry to the Path environment variable that looks like this: C:\Users\<YourUserNameHere>\AppData\Local\Yarn\bin
So I'm opening my the existing React Native project. This is the procedure on how I opened my existing React Native project. 1st step, type the location of my project which is in the "D:\rnprojects\firstproject\". 2nd step, "react-native-start". 3rd step, I opened another cmd then locate it again into my project directory then typed "npm start".
Why when I created this project I didn't get this error just when runnning/opening my existing project.
This the error that I got: (with versions)
There is only simple steps can solve your particular scenario issue quickly.
1) Install the React native cli in your project or globally.
npm install -g react-native-cli
OR
npm install react-native --save
then start your project by using this command
npm start
If any dependencies issue please follow the second solution
2) Please make sure you're installed all dependence
yarn install
OR
npm install
under your project directory
I'm pretty sure your issue will fix by using 1st solution Thanks.
it is simple:
1.npm install
2.react-native run-android
Here I guess you have the RN environment to run already on your side.
cd path_to_project
install packages(there are two following ways to install packages).
2.1 yarn install
2.2 npm install
react-native link(optional - you need to run this command if existing project use RN packages which need to link such as
react-native-vector-icons)
optional(if project use pods) cd ios pod install
react-native run-ios or react-native run-android according to the platform which you want to run on.
I don't think above is perfect instruction give you how to run the existing react-native project, But I am pleasure if give me some hints or help to you.
You can find official guide here
Sometimes npm's cache gets confused and need to reset it by using below command:
npm cache clean --force
Also try below command:
npm install --save-dev react-native-cli
Hope it will help you.
I'm trying to install Vue-cli environemnt via NPM.
npm install --global vue-cli
After that I want to create project
vue init webpack my-project
And I get an error
'vue' is not recognized as an internal or external command,
operable program or batch file.
I've read some solutions, most of them concern changing
PATH to C:\Users{YourUser}\AppData\Roaming\npm
Didn't work for me. Can anyone help.
I follow these commands, It's work fine for me.
npm install -g vue-cli
npm install -g vue
Edit the System environment variables, and enter the following path, and if still having a problem just try to add a path in System User Variables
C:\Program Files\nodejs\node.exe;
C:\Users\{UserName}\AppData\Roaming\npm
Check vue installed in C:\Users{UserName}\AppData\Roaming\npm
yarn add #vue/cli-service
or
npm install #vue/cli-service
is what worked for me
Well, problem was solved by simply deleting everything related to vue-cli installed before. And re-installing vue-cli.
I have faced simillar issue and re-installing vue-cli didn't work for me. Strange thing is vue and vue-cli get installed successfully but once I tried to create project by using below command
vue init webpack myfirstproject
I get below error:
'vue' is not recognized as an internal or external command,operable program or batch file.
Tried various solutions but nothing worked for me. Please find my NPM and Node details below:
NPM version: 6.2.0
Node version: 8.7.0
Actually the issue was "vue-cli" is not supporting to my Node(8.7.0). It requires Node >=8.9. Once I upgraded my Node version. everything is working fine.
upgrading your Node version is the correct way to deal with this issue
I found this same issue with another possible problem. I had
create-react-app#1.5.2 installed globally
npm list -g --depth=0 will display your globals
I simply uninstalled create-react-app
npm uninstall create-react-app
Vue vue-cli-service now works as expected.
had the same issue, i deleted my node_modules and re-install and it worked
I had the same problem after searching a lot I found this solution:
You need to Add C:\Program Files\nodejs to your PATH environment variable. To do this follow these steps:
Use the global Search to go to "Environment Variables"
Click "Edit system environment variables"
Click "Environment Variables" in the dialog
In the "System Variables" box, search for Path and edit it to include C:\Program Files\nodejs.
You will have to restart any currently-opened command prompts before it will take effect.
I hope it works, good luck!
I was installing #vue/cli using yarn, i.e. I ran
yarn global add #vue/cli
Calling vue on windows did not work after the installation ('vue' is not recognized as an internal or external command)
What I needed to do was to add C:\Users\<MY USERNAME>\AppData\Local\Yarn\bin to path.
yarn global add #vue/cli did not work for me
So I removed using yarn global remove #vue/cli
Then I installed using npm install -g #vue/cli and its working fine.
1)Try to remove all the node files, npm and nvm files/folders.
2)Also, remove the PATH of node js and nvm from environment variables.
3)try commands:
node -v
npm -v
nvm -v
above commands only to make sure that all the entities related to node are uninstalled.
4) install node, and if necessary install nvm(optioal), then run command
npm install -g #vue/cli
above procedure proven to be useful for me. Just give it a try!
for Yarn -> need to install it:
npm install -g yarn
Installing Vue CLI Package:
yarn global add #vue/cli
To create project:
vue create project-name
To run:
yarn serve
Uninstalling:
yarn global remove #vue/cli
I follow "npm" package manager instead of "yarn" package manager console because yarn give me a problem while installing it;
command to install Vue CLI:
npm install -g #vue/cli
For to create Vue project:
vue create "project-name"
For to run Vue project:
npm run serve
I recently started with react-native. I install it using the tutorial on the Facebook site and everything works well for a day or two until this message comes up:
'react-native' is not recognized as an internal or external command,
operable program or batch file.
Nothing works except uninstalling everything and starting all over again. The environments are ok and work (npm, choco, etc.). I have also tried removing and adding react-native to environment variables, restarting, and running cmd in administrator mode, but nothing so far. I should add that I use windows 10 64-bit.
I had the same issue and tried the following but didnt work
Adding npm path to my Environment variables; both system and user
Re install npm and react-native-cli
Both didn't work for me, im using Windows 10;
Solution that worked for me is to install react-native-cli globally
You can install it globally by using the below command:
npm install -g react-native-cli
You can simply use npx react-native <command> it will work
npm install -g react-native-cli
But dont forget to restart command promprt
Your system or user environment PATH variable was edited, you can uninstall NodeJs and install it again or add the below path to the end of PATH variable into user variables the restart the Windows :
C:\Users\[USER-NAME]\AppData\Roaming\npm
this should work.
You need to setup the npm path in your environment variables. Please look at the images down below
Then follow the command : for installing -g ( global ) for cli in your system
npm install -g react-native-cli
I get the same error right off the bat on Windows 10 running in cmd window in adminstrator mode, however there is also a bash shell version of react-native that worked for me in a git bash window.
cmd:----------------------------------------------
C:\Users\David\Documents\react>where react-native
C:\Users\David\AppData\Roaming\npm\react-native
C:\Users\David\AppData\Roaming\npm\react-native.cmd
C:\Users\David\Documents\react>react-native init AwesomeProject
'react-native' is not recognized as an internal or external command,
operable program or batch file.
git bash:----------------------------------------
David#CYBER-PC ~/Documents/react
$ react-native init AwesomeProject
This will walk you through creating a new React Native project in c:\Users\David\Documents\react\AwesomeProject
Installing react-native package from npm...
Setting up new React Native app in c:\Users\David\Documents\react\AwesomeProject
AwesomeProject#0.0.1 c:\Users\David\Documents\react\AwesomeProject`-- react#15.3.1
To run your app on iOS:
cd c:\Users\David\Documents\react\AwesomeProject
react-native run-ios
- or -
Open c:\Users\David\Documents\react\AwesomeProject\ios\AwesomeProject.xcodeproj in Xcode
Hit the Run button
To run your app on Android:
Have an Android emulator running (quickest way to get started), or a device connected
cd c:\Users\David\Documents\react\AwesomeProject
react-native run-android
npm install -g react-native-cli
I had to add the %APPDATA%\npm folder to my PATH on Windows 10. Global modules are installed there.
If uninstalling and installing again the npm did not work on you, try adding %APPDATA%\npm to path (Environment variables) then quick reboot/restart. System Reboot should really be part of the process. This worked on my end.
Install :
npm install -g react-native-cli
Uninstall :
npm uninstall -g react-native-cli
If you are following the getting started guide for Windows/Android, they recommend installing nodejs via Chocolatey. But Chocolatey likes to have administrator rights when it installs things. If you're just a regular user, this seems to interfere with how npm installs react-native-cli. In my case, the react-native command was only recognized when I launched a command prompt as admin.
What I did to fix:
launched command prompt as admin
uninstalled react-native-cli globally: npm uninstall -g react-native-cli
uninstalled nodejs via Chocolatey: choco uninstall nodejs
Now, as a regular user without admin rights:
installed nodejs via the nodejs website (not Chocolatey)
installed react-native-cli globally: npm install -g react-native-cli
I uninstalled node.js and then reinstalled it, and it worked like a charm
just uninstall the node.js and reinstall it..
then install the cli package typing command
npm install -g react-native-cli..
now you are ready to make your project.
To make project open a folder from your drive wherever your folder is located.
Then type command
react-native init albums
it will create a project for you inside your directory.
None of the above mentioned solutions worked for me. What did work was to remove nodejs, and reinstall it via Chocolatey with the following command:
PS > choco install -y nodejs.install python2 jdk8
> npm install -g react-native-cli
C:\Users\user\AppData\Roaming\npm\react-native ->
C:\Users\user\AppData\Roaming\npm\node_modules\react-native-cli\index.js
+ react-native-cli#2.0.1
added 41 packages from 15 contributors in 4.528s
I had this problem also becuase I restored my files from a previous OS installation. My problem was a wrong prefix in my C:\Users\user_name\.npmrc file.
Run npm config list and make sure that all your npm config variables are leading to the correct file paths. Delete the .npmrc file if you want have it to go back to the defaults. That's what I did and react-native command is working for me again.
I hope this helps.
i have no clear idea but below steps worked for me.
delete Node Modules
Uninstall react-native cli. This is Recommended in the react-native Documentation
"If you previously installed a global react-native-cli package, please remove it as it may cause unexpected issues."
npm uninstall -g react-native-cli
clean gradlew. in your project folder, go to the android folder by typing cd android
and run gradlew clean
move back to your project folder cd .., then run
npx react-native run-android
these steps worked for me. took some time when running first time.
use node.js stable version or recommended version.
On window 10, nodejs>11 global node libraries seems to be installed in C:\Users\your_user_name.npm-global. So you need to set the variable to point to that path
I had problems because of this strange mistake.
I checked to see if it was globally loaded again
I didn't delete all packages
I even deleted C:\Users[USER-NAME]\AppData\Roaming\ npm manually, but there was no solution.
The only thing that is the solution is to use the current version of node.js.
uninstall nodejs completely(restart your pc) and reinstall it using chocolatey and follow other commands from https://facebook.github.io/react-native/docs/getting-started.
worked perfectly fine for me!
Even if you have installed react-native globally and still get the same try adding path of npm module (C:\Users\your user name\AppData\Roaming\npm) to system variables instead of user variables.
I know it's too late, anyway
Make sure you've added the path of the NPM in system variable rather than user variable in the System Environment Variables.
PATH : C:\Users\user_name\AppData\Roaming\npm
Open a the command prompt and type: npm config list:
Get the path underlined in red and add it your system path (change two back slashes into one), for example: C:\Users\YOURNAME\AppData\Roaming\npm.
This solved the issue for me
I just wrote "react-native -v" to console to check have I still react-native and then just I wrote "react-native run-android" again and this time it worked. Yes just that. React native is terrible technology.
Looks like I have uninstalled react native cli by mistake, I tried all answers mentioned above, but the below command worked for me.
npx react-native run-android.
Solution
I was facing 'react-native' is not recognized as an internal or external command,operable program or batch file error when I was running react-native start in VsCode.
I Solved it by running npm install -g react-native-cli in PowerShell
Steps to follow
run PowerShell as admin (important step)
run running npm install -g react-native-cli in PowerShell
close VsCode and rerun it
that's all!
I solve this problem by running
npm install -g react-native-cli
then another error appears
Command run-android unrecognized.
I fixed this error by
npm install
Use npx before your command
npx react-native
Not just
react-native
if you faced the same issue as me just type :
npm i react-native
then try to create a new project as its recommended by the react native doc by typing :
npx react-native init yourProjectName
this should resolve your problem
hope this was helpful