Version: apache-log4cxx-0.12.0.tar.gz
Configuration:
mkdir build; cd build && cmake -DBUILD_SHARED_LIBS=off -DAPR_STATIC=yes -DAPU_STATIC=yes ..
Symptoms (log snippet):
32882 error: downloading 'https://www-us.apache.org/dist/logging/log4j/1.2.17/log4j-1.2.17.tar.gz' failed
32883 status_code: 6
32884 status_string: "Couldn't resolve host name"
32885 log:
32886 --- LOG BEGIN ---
This was building just last month. I can't 100% attest to the fact that the build procedure has not changed (since it was done manually) but I don't believe it was significantly different.
At first, I thought my DNS resolver was just out of date, but after some dig-ing and fiddling with /etc/resolv.conf, it has become apparent that the www-us.apache.org url log4cxx was using to get the tarball from has disappeared from the face of the earth.
Two methods you can use to fix this (which I wish someone had posted before me).
First
Hack your /etc/hosts file to spoof www-us.apache.org to actually go to www.apache.org (where you will find a redirect for the link). To give neophytes an idea of what I'm talking about, here is kinda how I did it on Debian.
sudo echo '151.101.2.132 www-us.apache.org' >> /etc/hosts
Second
Fix the cmake script src/test/java/CMakeLists.txt line 3 to point to the right link. The broken one is
https://www-us.apache.org/dist/logging/log4j/1.2.17/log4j-1.2.17.tar.gz
The right one is
https://downloads.apache.org/logging/log4j/1.2.17/log4j-1.2.17.tar.gz
Digging around the GitHub account we found this code merged and (I assume) ready to go out with the next release, whenever that is.
https://github.com/apache/logging-log4cxx/commit/341a23aa0d13278c8ae85b6017d49de9790f00fe
Here's hoping this helps someone not remain stuck, expecting the build to work like it did a month ago.
Related
I have Homebrew Apache installed and trying to connect Coldfusion Server 2016 with Tomcat mod_jk.
I downloaded the source code from https://tomcat.apache.org/download-connectors.cgi
I followed the directions to compile it, tried few different ways, but when I get to the "make" command, I keep getting the same error:
In file included from jk_ajp12_worker.c:26:
In file included from ./jk_ajp12_worker.h:26:
In file included from ./jk_logger.h:26:
In file included from ./jk_global.h:340:
./jk_types.h:56:2: error: Can not determine the proper size for pid_t
#error Can not determine the proper size for pid_t
^
./jk_types.h:62:2: error: Can not determine the proper size for pthread_t
#error Can not determine the proper size for pthread_t
^
2 errors generated.
make[1]: *** [jk_ajp12_worker.lo] Error 1
make: *** [all-recursive] Error 1
These are the different commands I've tried to compile:
./configure --with-apxs=/opt/homebrew/bin/apxs
./configure CFLAGS='-arch arm64e' APXSLDFLAGS='-arch arm64e' --with-apxs=/opt/homebrew/bin/apxs
./configure CFLAGS='-arch arm64e' APXSLDFLAGS='-arch arm64e' --with-apxs=/opt/homebrew/bin/apxs --host=arm
I recently got this new MacBook Pro 16" and migrated everything over from my 2017 MacBook Pro (Intel chip). I was running stock Apache with Coldfusion Server 2016, but when I tried to start up Apache on the new MacBook, it didn't like my mod_jk.so file and threw an error:
httpd: Syntax error on line 542 of /opt/homebrew/etc/httpd/httpd.conf: Syntax error on line 2 of /opt/homebrew/etc/httpd/mod_jk.conf:
Cannot load /Applications/ColdFusion2016/config/wsconfig/2/mod_jk.so into server: dlopen(/Applications/ColdFusion2016/config/wsconfig/2/mod_jk.so, 0x000A):
tried: '/Applications/ColdFusion2016/config/wsconfig/2/mod_jk.so'
(mach-o file, but is an incompatible architecture (have 'x86_64', need 'arm64e'))
I appreciate any help or input. Thank you.
I've finally installed Apache2 with Tomcat on my M1 and it all works.
The one thing you must do is to install a fresh Apache from Macports or HomeBrew. This is because most old installations copied from your old mac to your new one will now be in the read-only part of your file system and SIP won't let you near them. You will find weird and wonderful workarounds (apachectl told me I had to codesign mod_jk.so for example and I wasted a lot of time doing it and in the end it was pointless) and you will attempt to get the old installation to work, but trust me it's not worth it.
You will need to compile a fresh jk_module (mod_jk.so). This is what I did:
Download latest connector https://dlcdn.apache.org/tomcat/tomcat-connectors/jk/tomcat-connectors-1.2.48-src.tar.gz, save the .gz and unzip it.
Change directory to the native folder.
run which apxs to tell you the path to apxs for the ./configure command
The path mine gave was: /opt/local/bin/apxs. Use it as the path in the ./configure command below.
The commands are as follows (actually don't bother running them yet because they will fail):
./configure --with-apxs=/opt/local/bin/apxs
make
However make will fail with:
./jk_types.h:56:2: error: Can not determine the proper size for pid_t
#error Can not determine the proper size for pid_t
^
./jk_types.h:62:2: error: Can not determine the proper size for pthread_t
#error Can not determine the proper size for pthread_t
^
2 errors generated.
make[1]: *** [jk_ajp12_worker.lo] Error 1
make: *** [all-recursive] Error 1
This is a problem for M1 macs that has been fixed. So for the moment we will abandon the 1.2.48 source and download the source with the fix.
But don't delete the 1.2.48 source because the fix source is missing a few files which you will copy straight over from the 1.2.48 source.
The page to download the fix for Mac OS is here: https://github.com/apache/tomcat-connectors, which is commit e719874 on Jun 30, 2021.
Click on the green 'Code' button and then on 'Download ZIP'.
Unzip the new source and cd to 'native'
Run the commands:
./configure --with-apxs=/opt/local/bin/apxs
make
And whenever it stops and complains that something is missing, find it in the 1.2.48 source and copy it over to the same position in the new source and try again. It will happen two or three times.
I got this error at one point:
/home/myuser/source/mod_auth_cas/mod_auth_cas/missing: line 81: aclocal-1.15: command not found
WARNING: 'aclocal-1.15' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
make: *** [aclocal.m4] Error 127
Then I read somewhere to run autoreconf -f -i (which fixed it).
When make finishes, find your nice new mod_jk.so file in the native/apache-2.0 folder and copy it to where all your other modules are. I have a Macports installation so Homebrew is probably different, but my modules are in /opt/local/lib/apache2/modules.
Don't forget to add the LoadModule line in httpd.conf if it isn't already there:
LoadModule jk_module /opt/local/lib/apache2/modules/mod_jk.so
You might have some trouble working out which apache2 folders contain the new install, and not an old installation - I found two other installations knocking about trying to confuse me.
My config is here: /opt/local/etc/apache2/httpd.conf
apachectl is very useful for configuration.
apachectl -t -D DUMP_INCLUDES will find all the configuration files it is using. This totally saved me because it showed me that my httpd.conf file, which I had copied from elsewhere, was still pointing via 'Include' commands at other old config files in the wrong place.
apachectl configtest will test your config for you and print out any mistakes it finds. It pointed at 4 modules that it didn't like so I just excluded them. Though obviously read the messages carefully and google if you are not sure why apachectl doesn't like something. If it replies 'Syntax OK' you are ready to go.
This is a mysterious message I got a lot until I worked out that it was because httpd.conf was pointing at the wrong modules folder (an old install of apache2) for each module, so it was loading stuff that presumably was not compiled for 64bit
httpd: Syntax error on line 76 of /opt/local/etc/apache2/httpd.conf:
Cannot load libexec/apache2/mod_authz_owner.so into server:
dlopen(/usr/libexec/apache2/mod_authz_owner.so, 0x000A): symbol not
found in flat namespace '_apr_stat$INODE64'
This is my launch command using the plist which Macports automatically created:
sudo launchctl load -w /opt/local/etc/LaunchDaemons/org.macports.apache2/org.macports.apache2.plist
And to unload:
sudo launchctl unload /opt/local/etc/LaunchDaemons/org.macports.apache2/org.macports.apache2.plist
run ps ax|grep httpd to see if it's running.
Logging: Don't forget to sudo to create the jk folder in /var/log/apache2 if it doesn't already exist, otherwise apache or tomcat will have mysterious problems or won't start or something (the /var/log/apache2/jk folder is needed for jk.log).
Another problem cropped up just as I thought I had it made: apache
was unable to write its pid file on startup. Again this was because the position set in my config for the pid file was from the configuration on my old mac, and the position chosen was in a read-only location.
To change this you need to set the PidFile parameter, which I found in the following file:
/opt/local/etc/apache2/extra/httpd-mpm.conf
and it looks like this:
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
# Note that this is the default PidFile for most MPMs.
#
<IfModule !mpm_netware_module>
PidFile "local/run/apache2/httpd.pid"
</IfModule>
Don't worry about what the IfModule thing is doing, just set the PidFile to a writeable location, which as you can see is a relative path. You may be wondering what goes in front of the local folder.
What goes in front is the ServerRoot parameter set in httpd.conf:
ServerRoot "/usr"
So my pid will be written at /usr/local/run/apache2/httpd.pid. I had to create the run and apache2 folders.
That's about it. There are various logs that might indicate errors if you are stuck:
/var/log/apache2/error_log
And the jk.log for the apache/tomcat connector:
/var/log/apache2/jk/jk.log
And there's always the system log which just might tell you something:
/var/log/system.log
I hope very much that this helps someone. However it was very long and complicated and I have surely missed something that I did along the way, so if you come across some new problem I will see if I can help.
Running ColdFusion on a Mac is consistently a PITA. Doesn't matter if it's CF 9, 10, 11, all the way to current. Especially when you're dealing with a non-Intel based chipset. You are also trying to get an older and custom build of Toncat running on a chipset that likely isn't supported. You're also not the only one having this issue with CF 2016 on the M1 chip (they didn't find a solution either).
Try using CommandBox to run CF. It will download the server as a JAR file and run it on the Glassfish servlet container (IIRC). You won't need Apache either. It's really quite simple to get up and running.
https://commandbox.ortusbooks.com/embedded-server/multi-engine-support
Once you have it installed, go to your application's root folder in the CLI:
start cfengine=adobe#2016
It will download & install the server, then start the application.
Check the docs for more info.
I'm new to Elm. and I'm not good at English. So, if any ambiguous or wrong thing is there, please let me correct it.
----------- edit -----------
All my problem below is on WSL. when I'm trying on windows, all work fine. then... why elm install doesn't work on WSL? did you have any idea?
-------- problem --------
when I try to elm-test init, it doesn't work like below
$ elm-test init
Here is my plan:
Add:
elm/random 1.0.0
elm-explorations/test 1.2.2
Would you like me to update your elm.json accordingly? [Y/n]:
-- PROBLEM DOWNLOADING PACKAGE -------------------------------------------------
I was trying to download the source code for elm/random 1.0.0, so I tried to
fetch:
https://github.com/elm/random/zipball/1.0.0/
But my HTTP library is giving me the following error message:
ConnectionTimeout
Are you somewhere with a slow internet connection? Or no internet? Does the link
I am trying to fetch work in your browser? Maybe the site is down? Does your
internet connection have a firewall that blocks certain domains? It is usually
something like that!
but my Browser(Chrome) is working beautifully, and even in WSL (the environment that I run elm-test init command at) is too.
$ curl https://github.com/elm/random/zipball/1.0.0/
https://codeload.github.com/elm/random/legacy.zip/1.0.0<body>You are being redirected.</body></html>
then I also try again to redirect the URL
$ curl https://codeload.github.com/elm/random/legacy.zip
Warning: Binary output can mess up your terminal. Use "--output -" to tell
Warning: curl to output it to your terminal anyway, or consider "--output
Warning: <FILE>" to save to a file.
I think there's no Network Problem. My PC can connect with the repo, and I think it will be downloaded well.
I lastly tried just elm install, and that throws the same error too. it seems like Elm can't connect with the repo, even if My PC can.
$ elm install elm/random
Here is my plan:
Add:
elm/random 1.0.0
Would you like me to update your elm.json accordingly? [Y/n]:
-- PROBLEM DOWNLOADING PACKAGE -------------------------------------------------
I was trying to download the source code for elm/random 1.0.0, so I tried to
fetch:
https://github.com/elm/random/zipball/1.0.0/
But my HTTP library is giving me the following error message:
ConnectionTimeout
Are you somewhere with a slow internet connection? Or no internet? Does the link
I am trying to fetch work in your browser? Maybe the site is down? Does your
internet connection have a firewall that blocks certain domains? It is usually
something like that!
Please help me, what should I do?
I recently had reason to use WSL for elm development. It wasn't much fun and I'm glad to be back on Mac! What I found was that certain disk operations on WSL seemed to go very slowly and that could lead a variety of weird issues.
I was using Webstorm, which does not handle WSL well, so in the end I did everything on C: drive (rather than in /home/...) so that webstorm could run the windows version of elm-format, while my node development environment was run on the linux layer.
That's not a precise answer to your question but just to say that it can be done, but its not an ideal way to write Elm code in my experience
I had same issue and it was solved.
It was due to DNS server settings.
Create a file /etc/resolv.conf and write the following line.
nameserver 8.8.8.8
Then WSL will refer to Google Public DNS and works fine.
However, when restart WSL, the settings revert back.
Therefore, the following settings are also required.
Create a file /etc/wsl.conf and write the following line.
[network]
generateResolvConf = false
wsl --shutdown and restart WSL.
Reference link
https://github.com/microsoft/WSL/issues/4285#issuecomment-522201021
I wrote a Singularity container that works just fine on my computer. However, when a colleague of mine tries to run it, he gets the error output
FATAL: container creation failed: failed to resolve session directory /usr/local/var/singularity/mnt/session: lstat /usr/local/var: no such file or directory
In the past, he could run containers I build. In fact, he used being able to run a container with the same recipe. The change was that the version of Singularity on the machine I use to build it was upgraded.
I entered the error in a search engine, and I only found a single hit, https://forum.image.sc/t/improving-cluster-supercomputer-performance-tesla-v100-volta-16-32gb-gpu/37459/8, in which this is not resolved.
Does anybody know a way to fix this? Or what the source of the problem is? Or a workaround, preferably one that does not require me to downgrade Singularity? (The machine on which I build it is shared between several users, that's why I don't want to do that.)
Okay, this was somewhat trivial to solve, we just had the colleague create the required folder,
mkdir -p /usr/local/var/singularity/mnt/{container,final,overlay,session}
I've posted this issue on the google groups area for mapnik already, so I'm just going to c/p from there:
I've been troubleshooting this issue for a couple days, now. Bear with me for context:
Starting from a freshly-untarred source of mapnik 2.2.0 on RHEL 6.5:
First off, running "./configure" (which just calls scons/scons.py) works great. Finishes correctly, then I run make + make install and I get exactly what I want built and installed.
My goal has been to create a mapnik 2.2.0 RPM for internal use. Please do not suggest using an "official" mapnik RPM instead (or any other already-built mapnik RPM), as my entire purpose here is to build mapnik from source and create my own RPM.
That being said, when my RPM gets to its %build phase and runs ./configure, it freezes while scons checks for freetype-config. I've let it sit for hours, and nothing happens.
After I looked at the generated config.log file, it would appear that configure is failing on an "awk" command that goes something like this:
awk '{print $\(NF-1\)}'
The command is performed on the string that results from the command:
/usr/bin/freetype-config --libs --cflags
I'm wondering, first of all, how to fix this, but second of all why this would work manually, but fail when the rpmbuild process gets to the ./configure command. I've made sure that the same user (myself) is running both ./configure commands on the exact same files.
My third question would be: why does the configure step freeze on this issue, instead of throwing some sort of error and stopping?
Note that the problem with the "awk" command is the backslashes--the error is:
awk: {print $\(NF-1\)}
^ backslash not last character on line
When I remove the backslashes, the command succeeds. Whether or not removing the backslashes is the correct thing to do in the long run, I do not know.
It would seem this is some sort of python string-parsing / encoding issue, but I'm unsure. What really confuses me is why this works manually and fails when the rpmbuild tries to do it.
My only thought is that there's some difference between the rpmbuild environment and my shell that I configured on. What it is, I do not know.
Thank you for any assistance you can provide. If I can provide any more context, please let me know.
UPDATE: an svn command runs after the awk failure, but is missing whatever number gets passed after the -r option. I'm wondering if this could be causing the hang...thoughts?
its been more than 2 weeks. i try to instal but still getting error.
firstly, indeed I have searched similar error but i didn't find solution at all. if you find it. please let me know.
second, this is my state :
1. i have installed python 2.7 and django 1.5.1 (it works).
2. i also install MAMP.
3. i try to configure mod_wsgi and want it integrated with my MAMP apache server.
4. using mac mountain lion 10.8.4
my configuration file :
/etc/apache2/original/extra/httpd-userdir.conf inside my apache2/original/extra/
/etc/apache2/users/akhyar.conf pastebin.com/zcY58WTV (sorry about this Iam new on stack overflow)
/etc/apache2/httpd.conf pastebin.com/je2D8zMz
third, this is my error :
when i run apachectl configtest this error appears my error
so, what is going on actually? can someone tell me why and show me the mistakes?
if its been solved, what is the next step for configuring mod_wsgi on my MAMP?
thanks before, any help are highly appreciated.
In this file, line 15, you're including the per-user conf files:
http://pastebin.com/7y7ibuqP
On line 473 of this one, one of those per-user conf files, you're including the above file again:
http://pastebin.com/zcY58WTV
This causes infinite recursion while trying to parse the conf files.
I think there are some other errors too, and to be honest the files are pretty messy, but the best way forward is to remove all Include directives from akhyar.conf. For the most part they're already duplicates, where they're not, inline the contents of those files instead of using Include. If there are other errors, you'll at least see useful line numbers to start tracking them down.
Also note that the [warn] lines are just warnings - which you should probably fix, but the server will still run without them, that's not what's causing the error.