I'm trying to install OpenAL using vcpkg tools, but it gave an error message that I can not resolve.
Error message is as below.
C:\Dev\vcpkg\vcpkg-2021.05.12>vcpkg install openal-soft:x64-windows
Computing installation plan...
The following packages will be built and installed:
openal-soft[core]:x64-windows -> 1.21.1
Detecting compiler hash for triplet x64-windows...
-- Setting HTTP_PROXY environment variables to http://127.0.0.1:16005
-- Setting HTTPS_PROXY environment variables to https://127.0.0.1:16005
-- Setting SOCKS_PROXY environment variables to socks://127.0.0.1:16005
Error: while detecting compiler information:
The log content at C:\Dev\vcpkg\vcpkg-2021.05.12\buildtrees\detect_compiler\stdout-x64-windows.log is:
-- Found ninja('1.8.2') but at least version 1.10.1 is required! Trying to use internal version if possible!
-- Downloading https://github.com/ninja-build/ninja/releases/download/v1.10.1/ninja-win.zip -> ninja-win-1.10.1.zip...
-- Downloading https://github.com/ninja-build/ninja/releases/download/v1.10.1/ninja-win.zip... Failed. Status: 4;"A requested feature, protocol or option was not found built-in in this libcurl due to a build-time decision."
CMake Error at scripts/cmake/vcpkg_download_distfile.cmake:184
(message):
Failed to download file.
If you use a proxy, please set the HTTPS_PROXY and HTTP_PROXY environment
variables to "https://user:password#your-proxy-ip-address:port/".
If error with status 4 (Issue #15434),
try setting "http://user:password#your-proxy-ip-address:port/".
Otherwise, please submit an issue at https://github.com/Microsoft/vcpkg/issues
Call Stack (most recent call first):
scripts/cmake/vcpkg_find_acquire_program.cmake:544
(vcpkg_download_distfile)
scripts/cmake/vcpkg_configure_cmake.cmake:168
(vcpkg_find_acquire_program)
scripts/detect_compiler/portfile.cmake:18 (vcpkg_configure_cmake)
scripts/ports.cmake:142 (include)
Error: vcpkg was unable to detect the active compiler's information.
See above for the CMake failure output.
What do I do about it?
Related
I'm trying to compile a simple Hello_world example using the Smooth component (https://github.com/PerMalmberg/Smooth), and get error: include could not find load file:
../lib/compiler_options.cmake.
It seems that COMPONENT_DIR is not set, but I'm not aware whether/where to set this, or where this should have been set.
I've been staring at this too long, and am not finding the (apparently) obvious problem. Anyone any thoughts?
ERROR
Note: You are using Python 3.8.0. Python 3 support is new, please report any problems you encounter. Search for 'Setting
the Python Interpreter' in the ESP-IDF docs if you want to use Python 2.7.
Checking Python dependencies...
Python requirements from C:\Esp32_tools\esp-idf-v3.3\requirements.txt are satisfied.
Running cmake in directory C:\Temp\esp\testCPP\build
Executing "cmake -G Ninja -DPYTHON_DEPS_CHECKED=1 -DESP_PLATFORM=1 --warn-uninitialized C:\Temp\esp\testCPP"...
Warn about uninitialized values.
-- Building for target esp32
-- ccache will be used for faster builds
CMake Error at C:/Temp/esp/testCPP/externals/smooth/smooth_component/CMakeLists.txt:21 (include):
include could not find load file:
../lib/compiler_options.cmake
Call Stack (most recent call first):
C:/Esp32_tools/esp-idf-v3.3/tools/cmake/scripts/expand_requirements.cmake:107 (include)
C:/Esp32_tools/esp-idf-v3.3/tools/cmake/scripts/expand_requirements.cmake:217 (expand_component_requirements)`
CMake Error at C:/Esp32_tools/esp-idf-v3.3/CMakeLists.txt:39 (message):
Failed to expand component requirements
VERSION
C:\Temp\esp\testCPP>cmake --version
cmake version 3.13.4
CMake suite maintained and supported by Kitware (kitware.com/cmake).
CMakeLists.txt
set(CMAKE_CXX_STANDARD 17)
if(${ESP_PLATFORM})
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
# Include Smooth as a component
set(EXTRA_COMPONENT_DIRS
externals/smooth/smooth_component)
project(name_of_your_project)
else()
# Empty project when not building for ESP (i.e. when loading the project into an IDE with already configured tool chains for native Linux)
endif()```
CMake Error at C:/Esp32_tools/esp-idf-v3.3/CMakeLists.txt:39 (message):
Failed to expand component requirements
You are missing this line in CMakeLists.txt
https://github.com/espressif/esp-idf/blob/master/examples/get-started/hello_world/CMakeLists.txt#L3
Trying to build llvm project LLVM Project with CMake, it gives me an error that I can't solve by my own.
For doing this, I am using an Ubuntu Virtual Machine (version 18.04) and I am trying to build the project with "ninja".
I have tried to build this with the following commands (which the LLVM Builder Guide says to use, https://llvm.org/docs/GettingStarted.html)
git clone https://github.com/llvm/llvm-project.git
cd llvm-project/
mkdir build && cd build
cmake -DLLVM_ENABLE_PROJECTS='all' -DCMAKE_BUILD_TYPE=Release -G 'Ninja' ../llvm
At the last command, I use the first flag to download all the projects and the second because I do not need the Debug tools.
The last command gives me the following error several times with different targets:
CMake Error at /usr/share/cmake-3.10/Modules/ExternalProject.cmake:2759 (get_property):
get_property could not find TARGET llgo. Perhaps it has not yet been
created.
Call Stack (most recent call first):
/usr/share/cmake-3.10/Modules/ExternalProject.cmake:3032 (_ep_add_configure_command)
/home/enrique/Escritorio/llvm-project/llgo/CMakeLists.txt:200 (externalproject_add)
/home/enrique/Escritorio/llvm-project/llgo/CMakeLists.txt:219 (add_libgo_variant)
And this library error:
-- LLD version: 10.0.0
CMake Error at /usr/share/cmake-3.10/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find LibEdit (missing: libedit_INCLUDE_DIRS libedit_LIBRARIES)
Call Stack (most recent call first):
/usr/share/cmake-3.10/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
/home/enrique/Escritorio/llvm-project/lldb/cmake/modules/FindLibEdit.cmake:54 (find_package_handle_standard_args)
/home/enrique/Escritorio/llvm-project/lldb/cmake/modules/LLDBConfig.cmake:104 (find_package)
/home/enrique/Escritorio/llvm-project/lldb/CMakeLists.txt:21 (include)
-- Configuring incomplete, errors occurred!
See also "/home/enrique/Escritorio/llvm-project/build/CMakeFiles/CMakeOutput.log".
See also "/home/enrique/Escritorio/llvm-project/build/CMakeFiles/CMakeError.log".
I had the same issue, tried uninstalling the golang compiler (because I don't need llvm support for go); to no avail. I'm not an LLVM expert so this might not be the canonical solution but here's how I solved it:
I replaced
-DLLVM_ENABLE_PROJECTS='all'
by
-DLLVM_ENABLE_PROJECTS="proj1;proj2;proj3"
where I built the list "proj1;proj2;proj3" by grepping project is enabled$ in cmake output and removed the llgo project. I got a list like:
-- clang project is enabled
-- clang-tools-extra project is enabled
-- compiler-rt project is enabled
-- debuginfo-tests project is enabled
-- libclc project is enabled
-- libcxx project is enabled
-- libcxxabi project is enabled
-- libunwind project is enabled
-- lld project is enabled
-- lldb project is enabled
-- llgo project is enabled
-- openmp project is enabled
-- parallel-libs project is enabled
-- polly project is enabled
-- pstl project is enabled
and then built the following list with some vim macros/whatever you master (note: no llgo in there):
clang;clang-tools-extra;compiler-rt;debuginfo-tests;libclc;libcxx;libcxxabi;libunwind;lld;lldb;openmp;parallel-libs;polly;pstl
Then compiling llvm succeeded \o/
When trying to cmake a CGAL example, I get
CMake Error: Remove failed on file:
/cgal/example/CMakeFiles/CMakeTmp/cmTC_9e180.exe: System Error: Device or resource busy
Working under Win10 + Msys2.
CGAL was obtained via pacman (local/mingw-w64-x86_64-cgal 4.13-1).
Since I did not find the CGAL examples in any Msys2 package,
it was copied from file /usr/share/doc/libcgal13/examples.tar.gz, which was obtained in an Ubuntu system with
$ sudo apt-get install libcgal-demo
The example is reconstruction_surface_mesh.cpp from examples/Advancing_front_surface_reconstruction.
I wouldn't know if the origin of the error is specific to my CMakeLists.txt, or else.
Related, but AFAICT not providing the answer:
https://cmake.org/pipermail/cmake-developers/2010-November/012619.html
https://gitlab.kitware.com/cmake/cmake/issues/17566
https://github.com/TadasBaltrusaitis/OpenFace/issues/634
CMake: how to use INTERFACE_INCLUDE_DIRECTORIES with ExternalProject?
https://www.google.com/search?safe=off&q=CMake+Error+in+CMakeLists.txt%3A+++Imported+target+includes+non-existent+path+in+its+INTERFACE_INCLUDE_DIRECTORIES.++Possible+reasons+include
My program uses
FIND_PACKAGE(ITK REQUIRED)
it gives me the error message
Could not find a package configuration file provided by "ITK" with any of
the following names:
ITKConfig.cmake
itk-config.cmake
I've installed the packages itk and itk-devel but none of them has any CMake module. The module from CMake itself is deprecated.
I am using Fedora 23 and CMake 3.4.1
edit:
After downloading ITK 4.9.1 and trying to build it with
cmake ../
I get the following error:
Performing Test C_HAS_WARNING-Wformat=2
Performing Test C_HAS_WARNING-Wformat=2 - Success
Performing Test CXX_HAS_WARNING-Wformat=2
Performing Test CXX_HAS_WARNING-Wformat=2 - Success
CMake Error at CMakeLists.txt:243 (include):
include could not find load file:
/home/.../InsightToolkit/InsightToolkit-4.9.1/Utilities/KWStyle/KWStyle.cmake
CMake Error at CMake/ITKModuleEnablement.cmake:43 (message):
No such module "ITKKWIML" needed by "ITKCommon"
Call Stack (most recent call first):
CMake/ITKModuleEnablement.cmake:59 (itk_module_check)
CMake/ITKModuleEnablement.cmake:59 (itk_module_check)
CMake/ITKModuleEnablement.cmake:66 (itk_module_check)
CMakeLists.txt:345 (include)
You need to build and install ITK from source. There is a detailed explanation here.
Once you have finished installing ITK, CMake will be able to find it.
I want to download emscripten on ubuntu 12.04.I downloaded Cmake 3.3.0 then I download esmscripten_portable and I run these commands:
# Fetch the latest registry of available tools.
./emsdk update
# Download and install the latest SDK tools.
./emsdk install latest
I got these error messages:
-- Could NOT find OCaml (missing: OCAMLFIND OCAML_VERSION OCAML_STDLIB_PATH)
-- Could NOT find OCaml (missing: OCAMLFIND OCAML_VERSION OCAML_STDLIB_PATH)
-- OCaml bindings disabled.
CMake Error at cmake/modules/HandleLLVMOptions.cmake:17 (message):
Host GCC version must be at least 4.7!
Call Stack (most recent call first):
CMakeLists.txt:378 (include)
-- Configuring incomplete, errors occurred!
See also "/home/slim/Bureau/emsdk_portable/clang/tag-e1.34.3/build_tag-e1.34.3_32/CMakeFiles/CMakeOutput.log".
See also "/home/slim/Bureau/emsdk_portable/clang/tag-e1.34.3/build_tag-e1.34.3_32/CMakeFiles/CMakeError.log".
CMake invocation failed due to exception!
Working directory: /home/slim/Bureau/emsdk_portable/clang/tag-e1.34.3/build_tag-e1.34.3_32
Command '['cmake', '-G', 'Unix Makefiles', '-DCMAKE_BUILD_TYPE=RelWithDebInfo', '-DPYTHON_EXECUTABLE=/usr/bin/python', '-DLLVM_TARGETS_TO_BUILD=X86;JSBackend', '-DLLVM_INCLUDE_EXAMPLES=OFF', '-DLLVM_INCLUDE_TESTS=OFF', '-DCLANG_INCLUDE_EXAMPLES=OFF', '-DCLANG_INCLUDE_TESTS=OFF', '/home/slim/Bureau/emsdk_portable/clang/tag-e1.34.3/src']' returned non-zero exit status 1
Installation failed!
I installed all these libraries very well but when I run this command:./emsdk activate latest.I got this message:The Emscripten configuration file /home/slim/.emscripten has been rewritten with the following contents:
import os
SPIDERMONKEY_ENGINE = ''
NODE_JS = 'node'
LLVM_ROOT='/home/slim/Bureau/emsdk_portable/clang/tag-e1.34.3/build_tag-e1.34.3_32/bin'
EMSCRIPTEN_ROOT='/home/slim/Bureau/emsdk_portable/emscripten/tag-1.34.3'
EMSCRIPTEN_NATIVE_OPTIMIZER='/home/slim/Bureau/emsdk_portable/emscripten/tag-1.34.3_32bit_optimizer/optimizer'
V8_ENGINE = ''
TEMP_DIR = '/tmp'
COMPILER_ENGINE = NODE_JS
JS_ENGINES = [NODE_JS]
To conveniently access the selected set of tools from the command line, consider adding the following directories to PATH, or call 'source ./emsdk_env.sh' to do this for you.
/home/slim/Bureau/emsdk_portable:/home/slim/Bureau/emsdk_portable/clang/tag-e1.34.3/build_tag-e1.34.3_32/bin:/home/slim/Bureau/emsdk_portable/emscripten/tag-1.34.3
I run :
source ./emsdk_env.sh
But when I run the command :
./emcc v
I got :
bash: ./emcc: No such file or directory