I am trying to concatenate two integer values with hyphen in between. So when I try to do the same, SQL gives me the error.
Conversion failed when converting the varchar value '30-45' to data type int.
NOTE:
Also, the second value for concatenation can be null so in that case, a hyphen should not be concatenated.
example
from1 = 30
to1 = 45
case
to1 is null
then from1
else CONCAT(from1, '-' + nullif(to1,'')) end
AS age
//This works but shows 3045 instead of 30-45.
concat(from, '-', to) AS age
//This doesn't work out as it gives the error 'Conversion failed when converting the varchar value '30-45' to data type int.'
Thanks for the help in advance and looking forward to it.
DECLARE #FROM INT=30;
DECLARE #TO INT=45;
SELECT CAST(#FROM AS VARCHAR(2))+'-'+CAST(ISNULL(#TO,'') AS VARCHAR(2));
SQL is trying to convert your phrase to int probably because it's part of CASE statement. It uses the first route to determine the output type.
In your case- you put NULL as the first route option in your CASE, so it is determined as int. try putting instead of it this: CAST(NULL AS VARCHAR(10))
It seems that for some reason you think that strings that contain mathematical expressions are resolved as said expression, not an as literal string. Thus if you have the varchar value '30-45' you think it'll return the int value -15; this isn't true. This in fact isn't true in any language, let alone T-SQL.
For what you have, in your ELSE the '-' isn't a minus... It's a string... - is a minus. If you want to substract a number from another then it's a basic maths expression: a - b. You're effectively doing CONVERT(varchar,a) + '-' + CONVERT(varchar,b)... Just have your ELSE as the following:
from1 - NULLIF(to1,0)
This will return NULL if from1 has the value NULL, or to1 has the value NULL or 0.
Please check below code. It's working
example
#from1 = 30
#to1 = 45
IF #to1 is null
SELECT #from1
ELSE
SELECT CONCAT(#from1, '-' , nullif(#to1,'')) as age
Related
I have 2 tables(source and destination) which are respectively NOR_LABOR and ALL_LABOR_DETAILS. In the source table(NOR_LABOR) there is a column "feet_produced" with the data type "nchar(10)". In the destination table(ALL_LABOR_DETAILS) there's a column "labor_feet_produced" with the data type "decimal(18,4)". I want to convert the "feet_produced" from nchar(10) to decimal(18,4) and paste it in the "ALL_LABOR_DETAILS" table's "labor_feet_produced" column.
I have found a code regarding a simillar issue but did not do the exact as I need to do, following is that code snippet :
Select feet_produced AS feet_produced_s, CASE WHEN Isnumeric(feet_produced) = 1
THEN CONVERT(DECIMAL(18,2),feet_produced)
ELSE 0 END AS feet_produced
INTO [MES_DEV].[dbo].[ALL_LABOR_DETAILS]
from [dbo].[NOR_LABOR]
Thank you!
There are values that will test true for IS_NUMERIC, but will fail to convert to decimal.
Instead, use TRY_CONVERT which will return either the successfully-converted-to-decimal value, or a NULL when it fails. (You can then COALESCE to zero to get your desired result).
Here is a short example set of values, using TRY_CONVERT:
SELECT
TryConvert = COALESCE(TRY_CONVERT(decimal(18,4),TestValues),0)
FROM (
VALUES('10.6'),
('ten'),
('7d2'),
('10000000000'),
('10.00000001')
) AS x(TestValues);
The same set of values using your example code will throw an error:
SELECT
IsNumericCase = CASE
WHEN Isnumeric(TestValues) = 1
THEN CONVERT(DECIMAL(18,2),TestValues)
ELSE 0
END
FROM (
VALUES('10.6'),
('ten'),
('7d2'),
('10000000000'),
('10.00000001')
) AS x(TestValues);
This error is returned because 7d2 is numeric, but cannot be converted to decimal.
Msg 8114, Level 16, State 5, Line 14
Error converting data type varchar to numeric.
Im not sure what the issue is with the code that dose not work for you.
But here is how I would do it with a small change in the statement that you just post it.
insert into[MES_DEV].[dbo].[ALL_LABOR_DETAILS](labor_feet_produced)
select CONVERT(DECIMAL(18, 4), feet_produced) AS feet_produced_s from[dbo].[NOR_LABOR]
I am trying to compare records between two different SQL tables/databases in my Node project and have to do some transformation in order to compare the values.
In one database (MariaDB) the value is of type INT, and looks like this: 516542
In the other (SQL Server) database the value I need to match to is of type char(21), and looks like this: 00000516542-000
What I tried doing was this:
WHERE (REPLACE(LEFT( LM301.DOCNUMBR, CHARINDEX('-', LM301.DOCNUMBR)), '-', '')) = 516542
This works for some records, but for others I get this error:
"The conversion of the varchar value '0004000009123' overflowed an int
column."
If I pass the first value in as a string ('516542') it doesn't match at all.
How can I handle this scenario?
The error you're getting is at least correct. But from your example i can't determine whether the conversion is right or not.
Basically, somewhere in your CHAR(21). There a value which is greater than int32, or SQL Server int type, in value. This value is: 2,147,483,648. 4,000,009,123 is greater than this max value as specified by the error message.
The DBMS, with this where statement, will try to do the operation and compare to all records, and it runs into an overflow. You could do a string compare instead. Or try an explicit conversion and convert it to bigint.
WHERE CONVERT(BIGINT, (REPLACE(LEFT( LM301.DOCNUMBR, CHARINDEX('-', LM301.DOCNUMBR)), '-', ''))) = 516542
It's doing an implicit cast to INT because that's your compare type, then overflows. Making the conversion explicit allows you to determine the datatype instead.
Basically what's happening:
IF ('21474836480' >= 100) --Implicit conversion: Error and prints false
PRINT 'True'
ELSE
PRINT 'False'
IF ('214748364' >= 100) --Implicit Conversion: True
PRINT 'True'
ELSE
PRINT 'False'
IF (CONVERT(BIGINT, '21474836480') >= 100) --Explicit Conversion: Prints True
PRINT 'True'
ELSE
PRINT 'False'
So wrapping your value in an explicit conversion should resolve your error.
You need to do explicit type conversation with TRY_CONVERT():
TRY_CONVERT(BIGINT, LEFT(LM301.DOCNUMBR, CHARINDEX('-', LM301.DOCNUMBR + '-') - 1)) = 516542
TRY_CONVERT() will return NULL if conversation fail.
You don't need to use replace(), you can subtract the position.
EDIT : Try_CONVERT() is available from 2012 +. For older version you can do :
(CONVERT(BIGINT, LEFT(LM301.DOCNUMBR, CHARINDEX('-', LM301.DOCNUMBR) - 1)) = 516542 AND
CHARINDEX('-', LM301.DOCNUMBR) > 0)
)
Note : This might fail if DOCNUMBR doesn't have numeric value prior to -.
I'm getting the "conversion" error in a SQL Select query.
The error is:
Msg 248, Level 16, State 1, Line 6
The conversion of the nvarchar value '7000952682' overflowed an int column.
Problem is, there are no int columns in my table!
Here is the table structure:
Here is the query:
If I set the value of #SU to NULL, then it does return all rows as expected. When the value is set to the string value of '7000952682' I get the error.
Why is SQL Server trying to convert the nvarchar value to an int?
All branches of a CASE expression have to have the same type. In this case (no pun intended), it looks like SQL Server is using an integer type and doing an implicit cast of SU to integer. The problem is that the max value for an integer in SQL Server is roughly 2.1 billion, and the example you gave is using the value 7000952682, hence the overflow.
You have two options here. You could make everything varchar:
CASE WHEN #SU IS NULL OR #SU = '' THEN '1' ELSE [SU] END
Or, you could make everything numeric, using a type that won't overflow, e.g.
CASE WHEN #SU IS NULL OR #SU = ''
THEN CAST(1 AS numeric(20, 6))
ELSE CAST([SU] AS numeric(20, 6)) END
As a side note, you could write the first part of your CASE expression more succinctly using COALESCE:
CASE WHEN COALESCE(#SU, '') = '' THEN '1' ELSE [SU] END
Don't use case in the where clause. The logic is more simply and accurately expressed as:
where (#su is null or #su = '' or #su = su)
I'm trying to run a query with the following as one of the select statements, and I keep getting the error "Error converting data type nvarchar to float." I've been converting VBA IIf statements to CASES and I can't seem to get the conversions right. fld2 is nvarchar(15) and fld1 is a float data type. I need help pinpointing why this error is being thrown.
CASE WHEN (IsNumeric([fld2]) = 1) THEN Round(Convert(nvarchar,[fld2]) +
' / ' + Convert(nvarchar,[fld1]),(Len(Convert(nvarchar,[theData])) -
Charindex(Convert(nvarchar, [fld2]),'.'))) ELSE [fld2] END,
As is, your example would produce quite a funny expression for SQL server to evaluate. Let's substitute values for fld1, fld2, and theData as an example to see what you're trying to do:
[fld1] = 42.0
[fld2] = N'69.56'
[theData] = N'something'
(an N before a string makes it an nvarchar instead of varchar)
With substitutions, the resulting query would look like this:
CASE WHEN (IsNumeric(N'69.56') = 1) THEN
Round(Convert(nvarchar,'69.56') + ' / ' + Convert(nvarchar, 42.0),
(Len(Convert(nvarchar,'something')) - Charindex(Convert(nvarchar, N'69.56'),'.')))
ELSE
N'69.56'
END
Since you don't need to convert an nvarchar to nvarchar explicitly, your query actually looks more like:
CASE WHEN (IsNumeric(N'69.56') = 1) THEN
Round(N'69.56 / ' + Convert(nvarchar, 42.0),
(Len(N'something') - Charindex(N'69.56','.')))
ELSE
N'69.56'
END
So there are a couple of problems:
You're passing a varchar value into the ROUND() function, which expects a numeric value, not an expression
The two paths of the CASE statement are returning different types
What I think your query should look like is:
CASE WHEN IsNumeric([fld2]) = 1 THEN
CONVERT(nvarchar, ROUND(CONVERT(float, [fld2]) / [fld1],
(LEN([theData]) - CHARINDEX([fld2], '.'))))
ELSE
[fld2]
END
The above does the math and rounding on numeric results instead of strings, doesn't do any unnecessary conversions, and also returns the same type in both cases.
How to convert Varchar to Int in sql server 2008.
i have following code when i tried to run it wont allowed me to convert Varchar to Int.
Select Cast([Column1] as INT)
Column1 is of Varchar(21) NOT NULL type and i wanted to convert it into Int.
actually i am trying to insert Column1 into another table having Field as INT.
can someone please help me to convert this ?
Spaces will not be a problem for cast, however characters like TAB, CR or LF will appear as spaces, will not be trimmed by LTRIM or RTRIM, and will be a problem.
For example try the following:
declare #v1 varchar(21) = '66',
#v2 varchar(21) = ' 66 ',
#v3 varchar(21) = '66' + char(13) + char(10),
#v4 varchar(21) = char(9) + '66'
select cast(#v1 as int) -- ok
select cast(#v2 as int) -- ok
select cast(#v3 as int) -- error
select cast(#v4 as int) -- error
Check your input for these characters and if you find them, use REPLACE to clean up your data.
Per your comment, you can use REPLACE as part of your cast:
select cast(replace(replace(#v3, char(13), ''), char(10), '') as int)
If this is something that will be happening often, it would be better to clean up the data and modify the way the table is populated to remove the CR and LF before it is entered.
you can use convert function :
Select convert(int,[Column1])
That is how you would do it, is it throwing an error? Are you sure the value you are trying to convert is convertible? For obvious reasons you cannot convert abc123 to an int.
UPDATE
Based on your comments I would remove any spaces that are in the values you are trying to convert.
That is the correct way to convert it to an INT as long as you don't have any alpha characters or NULL values.
If you have any NULL values, use
ISNULL(column1, 0)
Try the following code. In most case, it is caused by the comma issue.
cast(replace([FIELD NAME],',','') as float)
Try with below command, and it will ask all values to INT
select case when isnumeric(YourColumn + '.0e0') = 1
then cast(YourColumn as int)
else NULL
end /* case */
from YourTable
There are two type of convert method in SQL.
CAST and CONVERT have similar functionality. CONVERT is specific to SQL Server, and allows for a greater breadth of flexibility when converting between date and time values, fractional numbers, and monetary signifiers. CAST is the more ANSI-standard of the two functions.
Using Convert
Select convert(int,[Column1])
Using Cast
Select cast([Column1] as int)