Out of memory error when adding comboboxes to userForm - vba

I have a MS Word document which has vba macro. I have too many comboboxes in my userform. After a point i can not add a new comboboxes. When I click to view code button, it gives me out of memory error. I'm adding my userForm to below.
My vba codes are like this
Private Sub UserForm_Activate()
hpcStage4
End Sub
Private Sub hpcStage4()
Me.cmbHPC4_1.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_2.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_3.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_4.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_5.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_6.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_7.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_8.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_9.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_10.List = Array("Serviceable", "Unserviceable", "N/A per WS")
Me.cmbHPC4_11.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_12.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_13.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_14.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_15.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_16.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_17.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_18.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_19.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_20.List = Array("Dent", "Nick", "Coating Damage", "Organic Redidues", "Dirt", "Trace", "Deposits", "Mineral Deposits", "Superficial Imperfection", "Scratch", "Scored", "Crack", "Axial Crack", "Radial Crack", "Circumferencial Crack", "Chordwise Crack", "Tip Connected Radial Crack", "Connected Loop Crack", "Full Crack", "Multi Cracks", "Tight Crack", "Burn", "Edge Burnback", "Burn Hole", "LE Burn Hole", "Burn Through Hole", "Burn Through", "Corrosion", "Discoloration", "Oxidation", "Sulphidation", "Erosion", "Blistering", "Pitting", "Peeling", "Ceramic Coating Detachment", "Missing Thermal Barrier Coating", "Tip rub", "Burr", "Curled", "Tip Curled", "Tip Corner Curled", "Missing Tip Corner", "Overlap", "Shingling", "Unlatching", "Out Of Flush", "Missing Material", "Missing Piece", "Chipped", "Flaking", "Lift Up", "Bulging", "Spalled", "Bent", "Distortion", "Tear", "Torn", "Wear", "Worn", "Plugged Air Slot", "Damper Wire Extrusion")
Me.cmbHPC4_21.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_22.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_23.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_24.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_25.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_26.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_27.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_28.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_29.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
Me.cmbHPC4_30.List = Array("EM TASK 72-00-00-200-002-B00", "AMM 72-00-00-200-016-B", "AMM 72-00-00-200-016-B01")
End Sub
What can be cause this issue?

Related

Using XMLNamespaces in SQL Query

This is a file received from customer.
I tried everything to go over the namespace in the file.
Always getting Null value. If I remove everything after Report in the header, it works fine.
I tried WITH XMLNamespaces in many different ways without success.
Please help me having this script working:
DECLARE #data XML;
SET #data =
'<Report xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="Support_x0020_Contract_x0020_Estimate" xsi:schemaLocation="Support_x0020_Contract_x0020_Estimate http://iomlkfsqlp08.corp.com/ReportServer?%2FIT%20Operations%2FSupport%20Contract%20Estimate&rs%3ACommand=Render&rs%3AFormat=XML&rs%3ASessionID=t3f0mu45i0embcmvkcoardad&rc%3ASchema=True" Name="Support Contract Estimate">
<table3 textbox44="249161.2050" textbox64="249161.20500000">
<table3_Group1_Collection>
<table3_Group1 textbox38="Q.I.T. - Fer et Titane Inc. - Customer Site ID: 16849
1625 Marie-Victorin
Tracy, Quebec J3R 1M6
CANADA
(450) 746-3000
CF Agreement#: 32466
Percentage Support - Standard Support Level
Start Date: 17-Jan-2021 - End Date: 16-Jan-2022
">
<Detail_Collection>
<Detail textbox42="Q.I.T. - Fer et Titane Inc. - Customer Site ID: 16849
1625 Marie-Victorin
Tracy, Quebec J3R 1M6
CANADA
(450) 746-3000
CF Agreement#: 32466
Percentage Support - Standard Support Level
Start Date: 17-Jan-2021 - End Date: 16-Jan-2022
" />
<Detail textbox42="CF Agreement Net Price" textbox46="245523.4050" textbox63="245523.40500000" />
</Detail_Collection>
</table3_Group1>
</table3_Group1_Collection>
</table3>
<table5>
<table4_Group3_Collection>
<table4_Group3 pricingresult1="Q.I.T. - Fer et Titane Inc. - Customer Site ID: 16849
1625 Marie-Victorin
Tracy, Quebec J3R 1M6
CANADA
(450) 746-3000
CF Agreement#: 32466
Percentage Support - Standard Support Level
Start Date: 17-Jan-2021 - End Date: 16-Jan-2022
" Textbox11="1 USD:
1.0000 USD" textbox72="2403700.0000" Textbox135="245523.4050" Textbox18="245523.40500000">
<table4_Group4_Collection>
<table4_Group4 textbox68="CF-STANDRD-R-HST" textbox69="772685.0000" pricingmethodtiermultiplier="0.17" Textbox104="131356.45" renewalvolumediscount="0.399999999999999" Textbox112="78813.8700000001" Textbox17="78813.8700000001" />
<table4_Group4 textbox68="CF-STANDRD-R-MES" textbox69="10485.0000" pricingmethodtiermultiplier="0.225" Textbox104="2359.125" renewalvolumediscount="0.4" Textbox112="1415.475" Textbox17="1415.475" />
<table4_Group4 textbox68="CF-STANDRD-R-WW" textbox69="1620530.0000" pricingmethodtiermultiplier="0.170000000000001" Textbox104="275490.100000002" renewalvolumediscount="0.400000000000004" Textbox112="165294.06" Textbox17="165294.06" />
</table4_Group4_Collection>
<table4>
<table4_Group2_Collection>
<table4_Group2>
<table4_Group1_Collection>
<table4_Group1>
<Detail_Collection>
<Detail textbox15="Renewal Volume Discount (40.00%)" textbox16="-163682.2700" Textbox61="-163682.27000000" />
</Detail_Collection>
</table4_Group1>
<table4_Group1>
<Detail_Collection>
<Detail textbox15="CF Agreement Net Price" textbox16="245523.4050" Textbox61="245523.40500000" />
</Detail_Collection>
</table4_Group1>
<table4_Group1>
<Detail_Collection>
<Detail textbox15="Cost to upgrade to Premium ($43,235.15)" textbox16="288758.5500" Textbox61="288758.55000000" />
<Detail textbox15="Cost to upgrade to Elite ($86,501.75)" textbox16="332025.1500" Textbox61="332025.15000000" />
</Detail_Collection>
</table4_Group1>
</table4_Group1_Collection>
</table4_Group2>
</table4_Group2_Collection>
</table4>
<table6 Textbox9="3RD PARTY PRODUCT FOR CUSTOMER SITE ID: 16849">
<table4_Group5_Collection>
<table4_Group5 Textbox12="1 USD:
1.0000 USD" textbox76="20210.0000" Textbox116="3637.8000" Textbox20="3637.80000000">
<table4_Group6_Collection>
<table4_Group6 textbox73="10-7008R" textbox74="20210.0000" pricingmethodtiermultiplier2="0.18" Textbox107="3637.8" renewalvolumediscount2="0" Textbox115="3637.8" Textbox19="3637.8" />
</table4_Group6_Collection>
</table4_Group5>
</table4_Group5_Collection>
</table6>
</table4_Group3>
</table4_Group3_Collection>
</table5>
<table2 />
<table1>
<table1_Group1_Collection>
<table1_Group1 textbox7="PRICING DETAIL BY LICENSE FOR CUSTOMER SITE ID: 16849 - CFA#: 32466" textbox3="1 USD:
1.0000 USD" listprice_csequiv_1="2423910.0000" textbox4="2423910.00000000">
<Detail_Collection>
<Detail sw_ser_no="408997-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.6" pricingvalue="6490.00000000" />
<Detail sw_ser_no="408998-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.66" pricingvalue="6490.00000000" />
<Detail sw_ser_no="408999-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.72" pricingvalue="6490.00000000" />
<Detail sw_ser_no="409000-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.783" pricingvalue="6490.00000000" />
<Detail sw_ser_no="416268-14" sw_sell_part_no="InTDev-01-C-20" sw_part_desc="UpgC, Dev Studio 2020 Limited InTouch Dev/RT 64Tag" numofconcurusers="1" listprice_csequiv="940.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-07-30T07:31:46.553" pricingvalue="940.00000000" />
</Detail_Collection>
</table1_Group1>
</table1_Group1_Collection>
</table1>
</Report>';
---WITH XMLNAMESPACES (DEFAULT'xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance')
SELECT #data.value('(Report/table1/table1_Group1_Collection/table1_Group1/Detail_Collection/Detail/#sw_ser_no)[1]', 'nvarchar(50)') as sw_ser_no

Your default namespace is 'Support_x0020_Contract_x0020_Estimate'
DECLARE #data XML;
SET #data =
'<Report xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="Support_x0020_Contract_x0020_Estimate" xsi:schemaLocation="Support_x0020_Contract_x0020_Estimate http://iomlkfsqlp08.corp.com/ReportServer?%2FIT%20Operations%2FSupport%20Contract%20Estimate&rs%3ACommand=Render&rs%3AFormat=XML&rs%3ASessionID=t3f0mu45i0embcmvkcoardad&rc%3ASchema=True" Name="Support Contract Estimate">
<table3 textbox44="249161.2050" textbox64="249161.20500000">
<table3_Group1_Collection>
<table3_Group1 textbox38="Q.I.T. - Fer et Titane Inc. - Customer Site ID: 16849
1625 Marie-Victorin
Tracy, Quebec J3R 1M6
CANADA
(450) 746-3000
CF Agreement#: 32466
Percentage Support - Standard Support Level
Start Date: 17-Jan-2021 - End Date: 16-Jan-2022
">
<Detail_Collection>
<Detail textbox42="Q.I.T. - Fer et Titane Inc. - Customer Site ID: 16849
1625 Marie-Victorin
Tracy, Quebec J3R 1M6
CANADA
(450) 746-3000
CF Agreement#: 32466
Percentage Support - Standard Support Level
Start Date: 17-Jan-2021 - End Date: 16-Jan-2022
" />
<Detail textbox42="CF Agreement Net Price" textbox46="245523.4050" textbox63="245523.40500000" />
</Detail_Collection>
</table3_Group1>
</table3_Group1_Collection>
</table3>
<table5>
<table4_Group3_Collection>
<table4_Group3 pricingresult1="Q.I.T. - Fer et Titane Inc. - Customer Site ID: 16849
1625 Marie-Victorin
Tracy, Quebec J3R 1M6
CANADA
(450) 746-3000
CF Agreement#: 32466
Percentage Support - Standard Support Level
Start Date: 17-Jan-2021 - End Date: 16-Jan-2022
" Textbox11="1 USD:
1.0000 USD" textbox72="2403700.0000" Textbox135="245523.4050" Textbox18="245523.40500000">
<table4_Group4_Collection>
<table4_Group4 textbox68="CF-STANDRD-R-HST" textbox69="772685.0000" pricingmethodtiermultiplier="0.17" Textbox104="131356.45" renewalvolumediscount="0.399999999999999" Textbox112="78813.8700000001" Textbox17="78813.8700000001" />
<table4_Group4 textbox68="CF-STANDRD-R-MES" textbox69="10485.0000" pricingmethodtiermultiplier="0.225" Textbox104="2359.125" renewalvolumediscount="0.4" Textbox112="1415.475" Textbox17="1415.475" />
<table4_Group4 textbox68="CF-STANDRD-R-WW" textbox69="1620530.0000" pricingmethodtiermultiplier="0.170000000000001" Textbox104="275490.100000002" renewalvolumediscount="0.400000000000004" Textbox112="165294.06" Textbox17="165294.06" />
</table4_Group4_Collection>
<table4>
<table4_Group2_Collection>
<table4_Group2>
<table4_Group1_Collection>
<table4_Group1>
<Detail_Collection>
<Detail textbox15="Renewal Volume Discount (40.00%)" textbox16="-163682.2700" Textbox61="-163682.27000000" />
</Detail_Collection>
</table4_Group1>
<table4_Group1>
<Detail_Collection>
<Detail textbox15="CF Agreement Net Price" textbox16="245523.4050" Textbox61="245523.40500000" />
</Detail_Collection>
</table4_Group1>
<table4_Group1>
<Detail_Collection>
<Detail textbox15="Cost to upgrade to Premium ($43,235.15)" textbox16="288758.5500" Textbox61="288758.55000000" />
<Detail textbox15="Cost to upgrade to Elite ($86,501.75)" textbox16="332025.1500" Textbox61="332025.15000000" />
</Detail_Collection>
</table4_Group1>
</table4_Group1_Collection>
</table4_Group2>
</table4_Group2_Collection>
</table4>
<table6 Textbox9="3RD PARTY PRODUCT FOR CUSTOMER SITE ID: 16849">
<table4_Group5_Collection>
<table4_Group5 Textbox12="1 USD:
1.0000 USD" textbox76="20210.0000" Textbox116="3637.8000" Textbox20="3637.80000000">
<table4_Group6_Collection>
<table4_Group6 textbox73="10-7008R" textbox74="20210.0000" pricingmethodtiermultiplier2="0.18" Textbox107="3637.8" renewalvolumediscount2="0" Textbox115="3637.8" Textbox19="3637.8" />
</table4_Group6_Collection>
</table4_Group5>
</table4_Group5_Collection>
</table6>
</table4_Group3>
</table4_Group3_Collection>
</table5>
<table2 />
<table1>
<table1_Group1_Collection>
<table1_Group1 textbox7="PRICING DETAIL BY LICENSE FOR CUSTOMER SITE ID: 16849 - CFA#: 32466" textbox3="1 USD:
1.0000 USD" listprice_csequiv_1="2423910.0000" textbox4="2423910.00000000">
<Detail_Collection>
<Detail sw_ser_no="408997-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.6" pricingvalue="6490.00000000" />
<Detail sw_ser_no="408998-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.66" pricingvalue="6490.00000000" />
<Detail sw_ser_no="408999-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.72" pricingvalue="6490.00000000" />
<Detail sw_ser_no="409000-13" sw_sell_part_no="InTch-06-C-20" sw_part_desc="UpgC, InTouch HMI 2020 Wrkst 60000 Tag with I/O" numofconcurusers="1" listprice_csequiv="6490.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-11-25T07:45:26.783" pricingvalue="6490.00000000" />
<Detail sw_ser_no="416268-14" sw_sell_part_no="InTDev-01-C-20" sw_part_desc="UpgC, Dev Studio 2020 Limited InTouch Dev/RT 64Tag" numofconcurusers="1" listprice_csequiv="940.0000" pricingmethodid2="WW HMI SCADA" intropricingflag="No" create_date="2020-07-30T07:31:46.553" pricingvalue="940.00000000" />
</Detail_Collection>
</table1_Group1>
</table1_Group1_Collection>
</table1>
</Report>';
WITH XMLNAMESPACES (DEFAULT 'Support_x0020_Contract_x0020_Estimate')
SELECT #data.value('(Report/table1/table1_Group1_Collection/table1_Group1/Detail_Collection/Detail/#sw_ser_no)[1]', 'nvarchar(50)') as sw_ser_no
Returns
sw_ser_no
408997-13
Edit
Extract all items as nodes:
...
SELECT t.n.value('(#sw_ser_no)[1]', 'nvarchar(50)') as sw_ser_no
FROM #data.nodes('Report/table1/table1_Group1_Collection/table1_Group1/Detail_Collection/Detail') t(n)

Modify Word Document Multilevel list to include all depth

I have a word document that has a 4 level deep multilevel list. I would like to modify the list styles (temporarily) to show the entire depth of the numbers. For instance, rather than just showing (iii), I want to modify it to show 1.1(a)(iii). I have seen instructions of attaching the style to the list, but I'm not sure how to write the style to show what I want.
So, all of the searching and the replies have not resulted in a working solution, yet, but I did discover that the .docx file is a zipped collection of xml files. So, after looking inside the docx file and the numbering.xml sub-file, I found the following section that seems to define the style for the numbering I am looking to change:
<w:abstractNum w:abstractNumId="93" w15:restartNumberingAfterBreak="0">
<w:nsid w:val="5FE75E67"/>
<w:multiLevelType w:val="multilevel"/>
<w:tmpl w:val="9C366D9C"/>
<w:lvl w:ilvl="0">
<w:start w:val="1"/>
<w:numFmt w:val="decimal"/>
<w:pStyle w:val="ArticleCL1"/>
<w:lvlText w:val="%1"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="720"/>
</w:tabs>
<w:ind w:left="0" w:firstLine="0"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Calibri" w:hAnsi="Calibri" w:cs="Times New Roman"/>
<w:b/>
<w:i w:val="0"/>
<w:caps/>
<w:smallCaps w:val="0"/>
<w:sz w:val="22"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="1">
<w:start w:val="1"/>
<w:numFmt w:val="decimal"/>
<w:pStyle w:val="ArticleCL2"/>
<w:lvlText w:val="%1.%2"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="720"/>
</w:tabs>
<w:ind w:left="720" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Calibri" w:hAnsi="Calibri" w:cs="Times New Roman"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="22"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="2">
<w:start w:val="1"/>
<w:numFmt w:val="lowerLetter"/>
<w:pStyle w:val="ArticleCL3"/>
<w:lvlText w:val="(%3)"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="720"/>
</w:tabs>
<w:ind w:left="720" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Calibri" w:hAnsi="Calibri" w:cs="Times New Roman"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="22"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="3">
<w:start w:val="1"/>
<w:numFmt w:val="lowerRoman"/>
<w:pStyle w:val="ArticleCL4"/>
<w:lvlText w:val="(%4)"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="1440"/>
</w:tabs>
<w:ind w:left="1440" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Calibri" w:hAnsi="Calibri" w:cs="Times New Roman"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="22"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="4">
<w:start w:val="1"/>
<w:numFmt w:val="lowerLetter"/>
<w:pStyle w:val="ArticleCL5"/>
<w:lvlText w:val="%5."/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="2160"/>
</w:tabs>
<w:ind w:left="2160" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Calibri" w:hAnsi="Calibri" w:cs="Times New Roman"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="24"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="5">
<w:start w:val="1"/>
<w:numFmt w:val="decimal"/>
<w:pStyle w:val="ArticleCL6"/>
<w:lvlText w:val="%6."/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="2160"/>
</w:tabs>
<w:ind w:left="2160" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Calibri" w:hAnsi="Calibri" w:cs="Times New Roman" w:hint="default"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="22"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="6">
<w:start w:val="1"/>
<w:numFmt w:val="bullet"/>
<w:lvlRestart w:val="0"/>
<w:pStyle w:val="ArticleCL7"/>
<w:lvlText w:val="·"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="1440"/>
</w:tabs>
<w:ind w:left="1440" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Symbol" w:hAnsi="Symbol" w:hint="default"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="24"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="7">
<w:start w:val="1"/>
<w:numFmt w:val="bullet"/>
<w:lvlRestart w:val="0"/>
<w:pStyle w:val="ArticleCL8"/>
<w:lvlText w:val="·"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="2160"/>
</w:tabs>
<w:ind w:left="2160" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Symbol" w:hAnsi="Symbol" w:hint="default"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:sz w:val="24"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
<w:lvl w:ilvl="8">
<w:start w:val="1"/>
<w:numFmt w:val="bullet"/>
<w:pStyle w:val="ArticleCL9"/>
<w:lvlText w:val="·"/>
<w:lvlJc w:val="left"/>
<w:pPr>
<w:tabs>
<w:tab w:val="num" w:pos="2880"/>
</w:tabs>
<w:ind w:left="2880" w:hanging="720"/>
</w:pPr>
<w:rPr>
<w:rFonts w:ascii="Symbol" w:hAnsi="Symbol" w:hint="default"/>
<w:b w:val="0"/>
<w:i w:val="0"/>
<w:caps w:val="0"/>
<w:color w:val="auto"/>
<w:sz w:val="24"/>
<w:u w:val="none"/>
</w:rPr>
</w:lvl>
Hopefully, this means that I can change the w:lvlText w:val="(%3) for w:ilvl="2" using VBA. Still investigating.
Thanks!
Rod

Well, it turns out that you can, indeed, directly modify a multiLevelList style at any level if you know how to refer to it. Using the xml file I referenced, I found that the third level style, ArticleC_L3, had it's number format set to "(%3)" which is what I wanted to change. It was in an abstract with AbstractNumId="93". The following code changes that setting:
wDoc.ListTemplates(94).ListLevels(3).NumberFormat = "%1.%2.%3"
You will notice that the ListTemplates number is one higher, and the ListLevels ID is likewise one higher. In either case, to find the precise place you need to refer to, the best workflow I have found is:
1. In the word doc, click on the number/bullet for the level you are trying to change.
2. Click the little dropdown arrow in the styles box so you can see what the style name is for that level.
3. Look in numbering.xml to see which number style is using that style name. For me the line read <w:pStyle w:val="ArticleCL3"/>
4. Follow the xml tree up to find out what level of the numbering style this is. For me the line read <w:lvl w:ilvl="2">
5. Continue to follow the xml tree up to find out what Template number the level is in. For me the line read <w:abstractNum w:abstractNumId="93" w15:restartNumberingAfterBreak="0">
6. Now you can refer to the exact level format as in the line I shared at the start.
Thanks for eveyone's help!
Rod

Presumably, something based on:
Sub ApplyMultiLevelStyleNumbers()
Dim LT As ListTemplate, i As Long
Set LT = ActiveDocument.ListTemplates.Add(OutlineNumbered:=True)
For i = 1 To 4
With LT.ListLevels(i)
.NumberFormat = Choose(i, "%1", "%1.%2", "%1.%2.%3", "%1.%2.%3.%4")
.Font.Bold = True
.ResetOnHigher = True
.StartAt = 1
.LinkedStyle = "ArticleC_L" & i
End With
Next
End Sub
The above assumes your four styles are named ArticleC_L1 - ArticleC_L4.

How to resolve 'Element is not currently interactable and may not be manipulated' and why my test case still can go through

Hi ,I'm doing automation test using katalon studio.while I was set value for the input text box, the system prompt error below in log properties:
Unable to set text '1' of object 'Object Repository/Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/Page_Welcome to KAPPS Factoring Sys (1)/input_model.buyerProgramStages_10' (Root cause: org.openqa.selenium.InvalidElementStateException: invalid element state: Element is not currently interactable and may not be manipulated
(Session info: chrome=65.0.3325.181)
(Driver info: chromedriver=2.35.528161 (5b82f2d2aae0ca24b877009200ced9065a772e73),platform=Windows NT 6.1.7601 SP1 x86_64) (WARNING: The server did not provide any stacktrace information)
Command duration or timeout: 0 milliseconds
Build info: version: '3.7.1', revision: '8a0099a', time: '2017-11-06T21:07:36.161Z'
System info: host: 'SGA1014', ip: '172.27.35.1', os.name: 'Windows 7', os.arch: 'amd64', os.version: '6.1', java.version: '1.8.0_102'
Driver info: com.kms.katalon.selenium.driver.CChromeDriver
Capabilities {acceptInsecureCerts: false, acceptSslCerts: false, applicationCacheEnabled: false, browserConnectionEnabled: false, browserName: chrome, chrome: {chromedriverVersion: 2.35.528161 (5b82f2d2aae0ca..., userDataDir: C:\Users\lixinyu\AppData\Lo...}, cssSelectorsEnabled: true, databaseEnabled: false, handlesAlerts: true, hasTouchScreen: false, javascriptEnabled: true, locationContextEnabled: true, mobileEmulationEnabled: false, nativeEvents: true, networkConnectionEnabled: false, pageLoadStrategy: normal, platform: XP, platformName: XP, rotatable: false, setWindowRect: true, takesHeapSnapshot: true, takesScreenshot: true, unexpectedAlertBehaviour: , unhandledPromptBehavior: , version: 65.0.3325.181, webStorageEnabled: true}
Session ID: 2e27edd7304a30bc2cc431c849c9e4b7)
So the status of my test case is failed,however, m able to set value into the textbox in the end.
Can someone tell me what happened?
My Script :
import static com.kms.katalon.core.checkpoint.CheckpointFactory.findCheckpoint
import static com.kms.katalon.core.testcase.TestCaseFactory.findTestCase
import static com.kms.katalon.core.testdata.TestDataFactory.findTestData
import static com.kms.katalon.core.testobject.ObjectRepository.findTestObject
import com.kms.katalon.core.checkpoint.Checkpoint as Checkpoint
import com.kms.katalon.core.checkpoint.CheckpointFactory as CheckpointFactory
import com.kms.katalon.core.mobile.keyword.MobileBuiltInKeywords as MobileBuiltInKeywords
import com.kms.katalon.core.mobile.keyword.MobileBuiltInKeywords as Mobile
import com.kms.katalon.core.model.FailureHandling as FailureHandling
import com.kms.katalon.core.testcase.TestCase as TestCase
import com.kms.katalon.core.testcase.TestCaseFactory as TestCaseFactory
import com.kms.katalon.core.testdata.TestData as TestData
import com.kms.katalon.core.testdata.TestDataFactory as TestDataFactory
import com.kms.katalon.core.testobject.ObjectRepository as ObjectRepository
import com.kms.katalon.core.testobject.TestObject as TestObject
import com.kms.katalon.core.webservice.keyword.WSBuiltInKeywords as WSBuiltInKeywords
import com.kms.katalon.core.webservice.keyword.WSBuiltInKeywords as WS
import com.kms.katalon.core.webui.keyword.WebUiBuiltInKeywords as WebUiBuiltInKeywords
import com.kms.katalon.core.webui.keyword.WebUiBuiltInKeywords as WebUI
import internal.GlobalVariable as GlobalVariable
import org.openqa.selenium.Keys as Keys
WebUI.openBrowser('')
WebUI.maximizeWindow()
WebUI.navigateToUrl('http://sgsgaapp80:18093/dash/landing.do')
WebUI.setText(findTestObject('Test BuyerProg/Page_Login to Kapps System/input_j_username'), 'lixin')
WebUI.setText(findTestObject('Test BuyerProg/Page_Login to Kapps System/input_j_password'), 'kpmg#123')
WebUI.click(findTestObject('Test BuyerProg/Page_Login to Kapps System/input_btnLogin'))
WebUI.click(findTestObject('Test BuyerProg/Page_KPMG System/div_India'))
WebUI.click(findTestObject('Test BuyerProg/Page_FactorPro - Welcome to KAPPS F/td_function changeRequestLocal'))
WebUI.click(findTestObject('Test BuyerProg/Page_FactorPro - Welcome to KAPPS F/a_SUPPLIER FINANCE'))
WebUI.click(findTestObject('Test BuyerProg/Page_FactorPro - Welcome to KAPPS F/a_Static Entry'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/div_hitarea expandable-hitarea'))
WebUI.click(findTestObject('Object Repository/Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/Page_Welcome to KAPPS Factoring Sys/li_Buyer Program Entry'))
// WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/a_Buyer Program Entry'))
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_(ALL) 0AUTOBUY00 - 0'),
'0AUTOBUY00', true)
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_(ALL) DB1 - DOM-Supp'),
'DB4', true)
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_form_2'))
WebUI.doubleClick(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.amo'))
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.amo'), 'Kevin Ng')
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerLimitID'), '9437523122C')
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.financeStage'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.financeStage_1'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.financeStage_2'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.financeStage_2'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/a_Indicators'))
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_Daily Weekly Mont'),
'W', true)
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.autoDebit'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.autoDebit_1'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_form_0'))
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_FIXED-TIER RATE'), 'M0',
true)
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages'), '5')
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_0 SBR (HKD) 1 USD LI'),
'9', true)
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_1'), '2')
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_2'), '30')
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_Document Date Financ'),
'SFP001', true)
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_3'), '20')
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_4'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/a_Pre-acceptance'))
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_FIXED-TIER RATE_1'),
'M0', true)
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages'), '2')
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_5'), '2')
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_0 SBR (HKD) 1 USD LI_1'),
'9', true)
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_6'), '1')
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_7'), '35')
WebUI.selectOptionByValue(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/select_Document Date Financ_1'),
'SFP002', true)
WebUI.setText(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_8'), '5')
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_model.buyerProgramStages_9'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_stage_0'))
WebUI.click(findTestObject('Test BuyerProg/Page_Welcome to KAPPS Factoring Sys/input_confirm_0'))
WebUI.waitForPageLoad(4)
String makerRef = new String()
makerRef = WebUI.getText(findTestObject('random/Page_Welcome to KAPPS Factoring Sys/span_Maker-Checker Ref 201712'))
println(('Required Maker Checker Reference should be as follows' + '\n') + makerRef)
String ref = makerRef.substring(20)
println(makerRef.substring(20))
WebUI.click(findTestObject('Test1_OR/Page_Welcome to KAPPS Factoring Sys/button_Logout'))
WebUI.closeBrowser(FailureHandling.CONTINUE_ON_FAILURE)
WebUI.callTestCase(findTestCase('SF 18093/checker-SF general'), [('makerReference') : ref], FailureHandling.STOP_ON_FAILURE)
My html for the stageform page:
<%# page language="java" contentType="text/html; charset=UTF-8"
pageEncoding="UTF-8"%>
<%# taglib prefix="s" uri="/struts-tags"%>
<%# taglib prefix="k" uri="/extended-struts-tags"%>
<s:if test="%{model.csptProg!=null}">
<s:url id="displayheader"
action="/WEB-INF/pages/factorpro/_static/entry/buyerprogram/common/displayheader.jsp" />
<s:include
value="/WEB-INF/pages/factorpro/_static/entry/buyerprogram/common/displayheader.jsp" />
<br />
<div id="formDiv"><s:form action="stage" method="post"theme="kpmg_tabber">
<s:url id="financestages"
value="/WEB-INF/pages/factorpro/_static/entry/buyerprogram/common/form/financestages.jsp" />
<s:url id="back" namespace="/createbuyerprogram" action="form" />
<div class="tabber">
<s:iterator value="model.buyerProgramStages" status="rowId">
<div class="tabbertab">
<h2><s:property value="stageName" /></h2>
<s:include
value="/WEB-INF/pages/factorpro/_static/entry/buyerprogram/common/form/financestages.jsp" />
</div>
</s:iterator>
<%-- <div class="tabbertab">
<h2><s:property value="%{getText('indicators')}" /></h2>
<s:include
value="/WEB-INF/pages/factorpro/_static/entry/buyerprogram/common/form/indicators.jsp" />
</div> --%>
</div>
<s:if test="%{model.resubmitting}">
<s:url id="owndashboard" namespace="%{dashboardnamespace}"
action="%{dashboardaction}" />
</s:if>
<s:include value="/WEB-INF/pages/common/formparts/common.jsp" />
<!-- For Maker checker Resubmit -->
<s:include value="/WEB-INF/pages/common/workflow/resubmit-display-remarks.jsp" />
<tr>
<k:submit type="input" align="right" value="%{getText('submit')}"
onclick="isCustomSubmit('stage','stage')" colspan="4" isfirst="true">
</k:submit>
<s:if test="%{model.resubmitting}">
<k:submit type="input" align="right" value="%{getText('back')}"
onclick="goto('%{owndashboard}');return false;" islast="true" colspan="4">
</k:submit>
</s:if>
<s:else>
<k:submit value="%{getText('Previous Page')}" onclick="isBack('stage')" islast="true" colspan="4">
</k:submit>
</s:else>
</tr>
</s:form></div>
</s:if>
<s:else>
<s:include value="/WEB-INF/pages/common/formparts/common.jsp" />
</s:else>

It tough to debug an exception/error without the relevant Code Trial and relevant HTML. However there seems to be an issue as follows :
The main issue here is the version compatibility between the binaries you are using as follows :
You are using chromedriver=2.35
Release Notes of chromedriver=2.35 clearly mentions the following :
Supports Chrome v62-64
You are using chrome=65.0
Release Notes of ChromeDriver v2.37 clearly mentions the following :
Supports Chrome v64-66
So there is a clear mismatch between ChromeDriver version (v2.35) and the Chrome Browser version (v65.0)
Solution
Upgrade ChromeDriver to current ChromeDriver v2.37 level.
Keep Chrome version at Chrome v65.x levels. (as per ChromeDriver v2.37 release notes)
Clean your Project Workspace through your IDE and Rebuild your project with required dependencies only.
Use CCleaner tool to wipe off all the OS chores before and after the execution of your test Suite.
If your base Web Client version is too old, then uninstall it through Revo Uninstaller and install a recent GA and released version of Web Client.
Take a System Reboot.
Execute your #Test.
How you escaped
Though you faced org.openqa.selenium.InvalidElementStateException and your test would have beenaborted KATALON STUDIO managed to keep the session alive and you were through.

Add the following line to the script, just before the element that shows the error.
WebUI.delay(3)
It worked for me.

Difference in Treatment of Floats Between Plots and Bar Plots in Matplotlib

I have a working plot using the following code:
import datetime as dt
import matplotlib.dates as mdate
import matplotlib.pyplot as plt
x = ['2016-06-20 21:00:02.313000', '2016-06-20 21:15:01.855000', '2016-06-20 21:30:01.690000', '2016-06-20 21:45:01.882000', '2016-06-20 22:00:02.005000', '2016-06-20 22:15:01.730000', '2016-06-20 22:30:01.479000', '2016-06-20 22:45:01.638000', '2016-06-20 23:00:01.886000', '2016-06-20 23:15:01.682000', '2016-06-20 23:30:01.653000', '2016-06-20 23:45:01.690000', '2016-06-21 00:00:02.196000', '2016-06-21 00:15:01.658000', '2016-06-21 00:30:01.514000', '2016-06-21 00:45:01.542000', '2016-06-21 01:00:01.291000', '2016-06-21 01:15:01.551000', '2016-06-21 01:30:01.439000', '2016-06-21 01:45:01.543000', '2016-06-21 02:00:01.449000', '2016-06-21 02:15:01.589000', '2016-06-21 02:30:01.555000', '2016-06-21 02:45:01.076000', '2016-06-21 03:00:01.588000', '2016-06-21 03:15:01.429000', '2016-06-21 03:30:01.029000', '2016-06-21 03:45:01.358000', '2016-06-21 04:00:01.460000', '2016-06-21 04:15:01.528000', '2016-06-21 04:30:01.366000', '2016-06-21 04:45:01.078000', '2016-06-21 05:00:01.541000', '2016-06-21 05:15:01.351000', '2016-06-21 05:30:01.618000', '2016-06-21 05:45:01.283000', '2016-06-21 06:00:01.297000', '2016-06-21 06:15:01.226000', '2016-06-21 06:30:01.219000', '2016-06-21 06:45:01.401000', '2016-06-21 07:00:01.410000', '2016-06-21 07:15:01.129000', '2016-06-21 07:30:01.420000', '2016-06-21 07:45:00.885000', '2016-06-21 08:00:01.338000', '2016-06-21 08:15:01.178000', '2016-06-21 08:30:01.148000', '2016-06-21 08:45:01.112000', '2016-06-21 09:00:01.357000', '2016-06-21 09:15:01.150000', '2016-06-21 09:30:00.814000', '2016-06-21 09:45:02.252000', '2016-06-21 10:00:01.757000', '2016-06-21 10:15:02.180000', '2016-06-21 10:30:02.188000', '2016-06-21 10:45:01.477000', '2016-06-21 11:00:02.100000', '2016-06-21 11:15:01.983000', '2016-06-21 11:30:02.038000', '2016-06-21 11:45:01.841000', '2016-06-21 12:00:01.825000', '2016-06-21 12:15:01.551000', '2016-06-21 12:30:01.716000', '2016-06-21 12:45:01.791000', '2016-06-21 13:00:02.297000', '2016-06-21 13:15:01.880000', '2016-06-21 13:30:01.433000', '2016-06-21 13:45:01.469000', '2016-06-21 14:00:01.769000', '2016-06-21 14:15:01.742000', '2016-06-21 14:30:01.803000', '2016-06-21 14:45:01.462000', '2016-06-21 15:00:01.819000', '2016-06-21 15:15:01.680000', '2016-06-21 15:30:01.657000', '2016-06-21 15:45:01.480000', '2016-06-21 16:00:01.578000', '2016-06-21 16:15:01.198000', '2016-06-21 16:30:01.584000', '2016-06-21 16:45:01.823000', '2016-06-21 17:00:01.636000', '2016-06-21 17:15:01.599000', '2016-06-21 17:30:01.419000', '2016-06-21 17:45:01.600000', '2016-06-21 18:00:01.746000', '2016-06-21 18:15:01.463000', '2016-06-21 18:30:01.345000', '2016-06-21 18:45:01.680000', '2016-06-21 19:00:01.509000', '2016-06-21 19:15:01.489000', '2016-06-21 19:30:01.708000', '2016-06-21 19:45:01.223000', '2016-06-21 20:00:01.310000', '2016-06-21 20:15:01.288000', '2016-06-21 20:30:01.188000', '2016-06-21 20:45:01.190000', '2016-06-21 21:00:01.260000', '2016-06-21 21:15:01.250000', '2016-06-21 21:30:01.218000', '2016-06-21 21:45:01.212000', '2016-06-21 22:00:01.220000', '2016-06-21 22:15:00.912000', '2016-06-21 22:30:00.840000', '2016-06-21 22:45:01.031000', '2016-06-21 23:00:01.159000', '2016-06-21 23:15:01.037000', '2016-06-21 23:30:00.851000', '2016-06-21 23:45:01.312000', '2016-06-22 00:00:02.867000', '2016-06-22 00:15:02.093000', '2016-06-22 00:30:02.074000', '2016-06-22 00:45:01.943000', '2016-06-22 01:00:02.038000', '2016-06-22 01:15:02.057000', '2016-06-22 01:30:01.854000', '2016-06-22 01:45:02.364000', '2016-06-22 02:00:01.976000', '2016-06-22 02:15:01.887000', '2016-06-22 02:30:01.720000', '2016-06-22 02:45:01.736000', '2016-06-22 03:00:01.901000', '2016-06-22 03:15:01.872000', '2016-06-22 03:30:01.457000', '2016-06-22 03:45:01.524000', '2016-06-22 04:00:02.015000', '2016-06-22 04:15:01.838000', '2016-06-22 04:30:01.637000', '2016-06-22 04:45:01.730000', '2016-06-22 05:00:01.781000', '2016-06-22 05:15:01.999000', '2016-06-22 05:30:01.508000', '2016-06-22 05:45:01.532000', '2016-06-22 06:00:01.100000', '2016-06-22 06:15:01.263000', '2016-06-22 06:30:01.267000', '2016-06-22 06:45:01.611000', '2016-06-22 07:00:01.718000', '2016-06-22 07:15:01.512000', '2016-06-22 07:30:01.485000', '2016-06-22 07:45:01.618000', '2016-06-22 08:00:01.665000', '2016-06-22 08:15:01.347000', '2016-06-22 08:30:01.294000', '2016-06-22 08:45:01.345000', '2016-06-22 09:00:01.599000', '2016-06-22 09:15:01.481000', '2016-06-22 09:30:01.219000', '2016-06-22 09:45:01.099000', '2016-06-22 10:00:01.318000', '2016-06-22 10:15:00.792000', '2016-06-22 10:30:01.341000', '2016-06-22 10:45:01.680000', '2016-06-22 11:00:01.608000', '2016-06-22 11:15:01.496000', '2016-06-22 11:30:01.235000', '2016-06-22 11:45:01.428000', '2016-06-22 12:00:01.384000', '2016-06-22 12:15:01.136000', '2016-06-22 12:30:01.691000', '2016-06-22 12:45:01.247000', '2016-06-22 13:00:01.511000', '2016-06-22 13:15:00.956000', '2016-06-22 13:30:01.055000', '2016-06-22 13:45:01.042000', '2016-06-22 14:00:01.314000', '2016-06-22 14:15:01.211000', '2016-06-22 14:30:01.619000', '2016-06-22 14:45:01.990000', '2016-06-22 15:00:02.147000', '2016-06-22 15:15:01.906000', '2016-06-22 15:30:01.873000', '2016-06-22 15:45:02.065000', '2016-06-22 16:00:01.892000', '2016-06-22 16:15:01.823000', '2016-06-22 16:30:01.950000', '2016-06-22 16:45:01.871000', '2016-06-22 17:00:01.638000', '2016-06-22 17:15:01.664000', '2016-06-22 17:30:01.897000', '2016-06-22 17:45:01.862000', '2016-06-22 18:00:01.638000', '2016-06-22 18:15:01.700000', '2016-06-22 18:30:01.610000', '2016-06-22 18:45:01.589000', '2016-06-22 19:00:01.876000', '2016-06-22 19:15:01.849000', '2016-06-22 19:30:02.241000', '2016-06-22 19:45:01.752000', '2016-06-22 20:00:01.305000', '2016-06-22 20:15:01.584000', '2016-06-22 20:30:01.479000', '2016-06-22 20:45:01.448000', '2016-06-22 21:00:01.714000', '2016-06-22 21:15:01.626000', '2016-06-22 21:30:01.545000', '2016-06-22 21:45:01.426000', '2016-06-22 22:00:01.656000', '2016-06-22 22:15:01.653000', '2016-06-22 22:30:01.396000', '2016-06-22 22:45:01.529000', '2016-06-22 23:00:01.463000', '2016-06-22 23:15:00.991000', '2016-06-22 23:30:01.371000', '2016-06-22 23:45:01.804000', '2016-06-23 00:00:02.017000', '2016-06-23 00:15:01.199000', '2016-06-23 00:30:01.319000', '2016-06-23 00:45:01.383000', '2016-06-23 01:00:01.298000', '2016-06-23 01:15:01.327000', '2016-06-23 01:30:01.576000', '2016-06-23 01:45:01.166000', '2016-06-23 02:00:01.206000', '2016-06-23 02:15:01.202000', '2016-06-23 02:30:01.172000', '2016-06-23 02:45:01.088000', '2016-06-23 03:00:01.239000', '2016-06-23 03:15:01.062000', '2016-06-23 03:30:00.924000', '2016-06-23 03:45:01.009000', '2016-06-23 04:00:00.732000', '2016-06-23 04:15:01.003000', '2016-06-23 04:30:01.136000', '2016-06-23 04:45:02.176000', '2016-06-23 05:00:02.134000', '2016-06-23 05:15:02.031000', '2016-06-23 05:30:01.832000', '2016-06-23 05:45:02.024000', '2016-06-23 06:00:02.323000', '2016-06-23 06:15:02.567000', '2016-06-23 06:30:02.139000', '2016-06-23 06:45:01.507000', '2016-06-23 07:15:01.507000', '2016-06-23 07:30:01.896000', '2016-06-23 07:45:01.886000', '2016-06-23 08:00:01.877000', '2016-06-23 08:15:01.806000', '2016-06-23 08:30:02.031000', '2016-06-23 08:45:01.692000', '2016-06-23 09:00:02.013000', '2016-06-23 09:15:01.888000', '2016-06-23 09:30:01.843000', '2016-06-23 09:45:01.733000', '2016-06-23 10:00:03.221000', '2016-06-23 10:15:01.600000', '2016-06-23 10:30:01.751000', '2016-06-23 10:45:01.262000', '2016-06-23 11:00:01.942000', '2016-06-23 11:15:01.619000', '2016-06-23 11:30:01.574000', '2016-06-23 11:45:01.471000', '2016-06-23 12:00:01.638000', '2016-06-23 12:15:01.490000', '2016-06-23 12:30:01.296000', '2016-06-23 12:45:01.407000', '2016-06-23 13:00:01.690000', '2016-06-23 13:15:01.665000', '2016-06-23 13:30:01.470000', '2016-06-23 13:45:00.896000', '2016-06-23 14:00:01.407000', '2016-06-23 14:15:01.305000', '2016-06-23 14:30:01.342000', '2016-06-23 14:45:01.020000', '2016-06-23 15:00:01.278000', '2016-06-23 15:15:01.257000', '2016-06-23 15:30:01.489000', '2016-06-23 15:45:01.160000', '2016-06-23 16:00:01.278000', '2016-06-23 16:15:01.228000', '2016-06-23 16:30:01.347000', '2016-06-23 16:45:01.477000', '2016-06-23 17:00:01.295000', '2016-06-23 17:15:01.093000', '2016-06-23 17:30:01.524000', '2016-06-23 17:45:01.216000', '2016-06-23 18:00:01.129000', '2016-06-23 18:15:01.251000', '2016-06-23 18:30:01.524000', '2016-06-23 18:45:01.057000', '2016-06-23 19:00:00.575000', '2016-06-23 19:15:02.286000', '2016-06-23 19:30:02.305000', '2016-06-23 19:45:01.905000', '2016-06-23 20:00:02.355000', '2016-06-23 20:15:01.615000', '2016-06-23 20:30:01.801000', '2016-06-23 20:45:01.946000', '2016-06-23 21:00:02.196000', '2016-06-23 21:15:01.927000', '2016-06-23 21:30:01.561000', '2016-06-23 21:45:01.830000', '2016-06-23 22:00:01.954000', '2016-06-23 22:15:01.548000', '2016-06-23 22:30:01.778000', '2016-06-23 22:45:01.536000', '2016-06-23 23:00:01.802000', '2016-06-23 23:15:01.827000', '2016-06-23 23:30:01.265000', '2016-06-23 23:45:01.953000', '2016-06-24 00:00:02.483000', '2016-06-24 00:15:01.594000', '2016-06-24 00:30:01.616000', '2016-06-24 00:45:01.727000', '2016-06-24 01:00:01.853000', '2016-06-24 01:15:01.645000', '2016-06-24 01:30:01.653000', '2016-06-24 01:45:01.201000', '2016-06-24 02:00:01.230000', '2016-06-24 02:15:01.400000', '2016-06-24 02:30:01.477000', '2016-06-24 02:45:01.649000', '2016-06-24 03:00:01.582000', '2016-06-24 03:15:01.481000', '2016-06-24 03:30:01.397000', '2016-06-24 03:45:01.272000', '2016-06-24 04:00:01.487000', '2016-06-24 04:15:01.429000', '2016-06-24 04:30:01.328000', '2016-06-24 04:45:01.348000', '2016-06-24 05:00:01.393000', '2016-06-24 05:15:00.969000', '2016-06-24 05:30:01.529000', '2016-06-24 05:45:00.857000', '2016-06-24 06:00:01.117000', '2016-06-24 06:15:01.230000', '2016-06-24 06:30:01.378000', '2016-06-24 06:45:00.877000', '2016-06-24 07:00:01.310000', '2016-06-24 07:15:01.167000']
y = ['29.99', '30', '30', '29.99', '30', '30.02', '30.02', '30.03', '30.04', '30.05', '30.06', '30.06', '30.06', '30.05', '30.05', '30.05', '30.05', '30.05', '30.05', '30.05', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.03', '30.03', '30.03', '30.03', '30.03', '30.03', '30.03', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.05', '30.05', '30.05', '30.05', '30.05', '30.04', '30.04', '30.05', '30.05', '30.05', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.04', '30.03', '30.03', '30.02', '30.02', '30.01', '30.01', '30.01', '30', '29.99', '29.99', '29.98', '29.98', '29.97', '29.97', '29.96', '29.96', '29.96', '29.95', '29.94', '29.94', '29.94', '29.93', '29.92', '29.92', '29.92', '29.92', '29.92', '29.92', '29.92', '29.92', '29.93', '29.93', '29.93', '29.93', '29.93', '29.93', '29.94', '29.94', '29.94', '29.94', '29.94', '29.94', '29.94', '29.94', '29.94', '29.95', '29.95', '29.95', '29.95', '29.94', '29.94', '29.94', '29.94', '29.93', '29.92', '29.9', '29.9', '29.91', '29.93', '29.95', '29.95', '29.96', '29.95', '29.94', '29.94', '29.96', '29.96', '29.96', '29.95', '29.95', '29.99', '29.99', '29.97', '29.97', '30', '29.99', '29.99', '29.99', '29.98', '29.92', '29.9', '29.9', '29.89', '29.91', '29.91', '29.91', '29.92', '29.92', '29.92', '29.92', '29.96', '29.99', '30.04', '30.04', '30.02', '29.89', '29.89', '29.89', '29.89', '29.91', '29.9', '29.91', '29.91', '29.91', '29.89', '29.89', '29.89', '29.89', '29.89', '29.88', '29.88', '29.88', '29.87', '29.87', '29.86', '29.86', '29.86', '29.84', '29.83', '29.83', '29.82', '29.82', '29.8', '29.8', '29.78', '29.76', '29.77', '29.77', '29.75', '29.74', '29.74', '29.73', '29.73', '29.76', '29.83', '29.82', '29.82', '29.79', '29.78', '29.76', '29.76', '29.76', '29.78', '29.77', '29.77', '29.78', '29.78', '29.78', '29.78', '29.78', '29.75', '29.77', '29.77', '29.77', '29.77', '29.78', '29.79', '29.79', '29.79', '29.79', '29.79', '29.79', '29.8', '29.8', '29.8', '29.8', '29.81', '29.81', '29.81', '29.82', '29.82', '29.83', '29.83', '29.84', '29.84', '29.85', '29.85', '29.86', '29.87', '29.87', '29.87', '29.87', '29.87', '29.87', '29.88', '29.88', '29.88', '29.88', '29.88', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.9', '29.9', '29.9', '29.9', '29.9', '29.89', '29.89', '29.89', '29.89', '29.89', '29.89', '29.9', '29.89', '29.89', '29.89', '29.89', '29.9', '29.9', '29.9', '29.9', '29.92', '29.92', '29.92', '29.92', '29.92', '29.94', '29.94', '29.94', '29.95', '29.95', '29.96', '29.96', '29.97', '29.97', '29.98', '29.98', '29.98', '29.99', '29.99', '29.99', '30.0', '30.0', '30.0', '30.0', '30.0', '30.0', '30.0', '30.0', '30.0', '30.0', '29.99', '29.99', '29.99', '29.99', '29.99', '29.99', '29.99', '30.01', '30.01', '30.02', '30.02', '30.03', '30.03', '30.04', '30.04', '30.04']
list_of_dates = [dt.datetime.strptime(obs, '%Y-%m-%d %H:%M:%S.%f') for obs in x]
dates_to_plot = mdate.date2num(list_of_dates)
fig1 = plt.figure(1, figsize=(7, 3))
ax = fig1.add_subplot(111)
ax.plot(dates_to_plot, y)
ax.xaxis.set_major_formatter(mdate.DateFormatter('%a'))
plt.show()
But when I change ax.plot to ax.bar, Matplotlib throws an error saying:
/System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python/matplotlib/transforms.py:745:
TypeError: unsupported operand type(s) for +: 'int' and 'str'
I realize that converting the y obs to floats will clear the error, I'm just curious why (all else equal) ax.plot can handle the data as strings but ax.bar can not.
EDIT: This question applies to what would now be considered very old and outdated versions of Matplotlib and Python.

defining a substitution box for AES in SMT solvers

How do I define a function which performs a substitution of values according to the table here?
static const unsigned char FSb[256] =
{
0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5,
0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0,
0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC,
0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A,
0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0,
0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B,
0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85,
0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5,
0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17,
0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
0x60, 0x81, 0x4F, 0xDC, 0x22, 0x2A, 0x90, 0x88,
0x46, 0xEE, 0xB8, 0x14, 0xDE, 0x5E, 0x0B, 0xDB,
0xE0, 0x32, 0x3A, 0x0A, 0x49, 0x06, 0x24, 0x5C,
0xC2, 0xD3, 0xAC, 0x62, 0x91, 0x95, 0xE4, 0x79,
0xE7, 0xC8, 0x37, 0x6D, 0x8D, 0xD5, 0x4E, 0xA9,
0x6C, 0x56, 0xF4, 0xEA, 0x65, 0x7A, 0xAE, 0x08,
0xBA, 0x78, 0x25, 0x2E, 0x1C, 0xA6, 0xB4, 0xC6,
0xE8, 0xDD, 0x74, 0x1F, 0x4B, 0xBD, 0x8B, 0x8A,
0x70, 0x3E, 0xB5, 0x66, 0x48, 0x03, 0xF6, 0x0E,
0x61, 0x35, 0x57, 0xB9, 0x86, 0xC1, 0x1D, 0x9E,
0xE1, 0xF8, 0x98, 0x11, 0x69, 0xD9, 0x8E, 0x94,
0x9B, 0x1E, 0x87, 0xE9, 0xCE, 0x55, 0x28, 0xDF,
0x8C, 0xA1, 0x89, 0x0D, 0xBF, 0xE6, 0x42, 0x68,
0x41, 0x99, 0x2D, 0x0F, 0xB0, 0x54, 0xBB, 0x16
};
I was thinking about it the whole day, but to avail, I am still stuck on this problem. Any suggestions/ answers is welcome. Thanks!

Assert the equality of the select at each index to be the constant at that index in the table that you gave.
(declare-fun FSb () (Array (_ BitVec 8) (_ BitVec 8)))
(assert (= (select FSb #x00) #x63))
(assert (= (select FSb #x01) #x7C))
...
(FSB could also be modeled as an uninterpreted function.)
The define-fun version of the above will result in a long cascade of ites. This is likely to be a lot less efficient.