I have a table with sessions events names. Each session can have 3 different types of events.
There are sessions that have only error type event and I need to identify them by getting a list those session.
I tried the following code:
SELECT
test.SessionId, SS.RequestId
FROM
(SELECT DISTINCT
SSE.SessionId,
SSE.type,
COUNT(SSE.SessionId) OVER (ORDER BY SSE.SessionId, SSE.type) AS total_XSESIONID_TYPE,
COUNT(SSE.SessionId) OVER (ORDER BY SSE.SessionId) AS total_XSESIONID
FROM
[CMstg].SessionEvents SSE
-- WHERE SSE.SessionId IN ('fa3ed523-60f9-4af0-a85f-1dec9e9d2cdb' )
) AS test
WHERE
test.total_XSESIONID_TYPE = test.total_XSESIONID
AND test.type = 'Errors'
-- AND test.SessionId IN ('fa3ed523-60f9-4af0-a85f-1dec9e9d2cdb' )
Each session can have more than one type, and I need to count only the sessions that have only type 'errors'. I don't want to include sessions that have additional types of events in the count
While I'm running the first query I'm getting a count of 3 error event per session, but while running the all procedure the number is multiplied to 90?
Sample table :
sessionID
type
fa3ed523-60f9-4af0-a85f-1dec9e9d2cdb
Errors
fa3ed523-60f9-4af0-a85f-1dec9e9d2cdb
Errors
fa3ed523-60f9-4af0-a85f-1dec9e9d2cdb
Errors
00c896a0-dccc-41bf-8dff-a5cd6856bb76
NonError
00c896a0-dccc-41bf-8dff-a5cd6856bb76
Errors
00c896a0-dccc-41bf-8dff-a5cd6856bb76
Errors
00c896a0-dccc-41bf-8dff-a5cd6856bb76
Errors
In this case I should get
sessionid = fa3ed523-60f9-4af0-a85f-1dec9e9d2cdb
Please advice - hope this is clearer now, thanks!
It's been a long time but I think something like this should get you the desired results:
SELECT securemeSessionId
FROM <TableName> -- replace with actual table name
GROUP BY securemeSessionId
HAVING COUNT(*) = COUNT(CASE WHEN type = 'errors' THEN 1 END)
And a pro tip: When asking sql-server questions, it's best to follow these guidelines
SELECT *
FROM NameOfDataBase
WHERE type!= 'errors'
Is it what you wanted to do?
Related
When I run the following query, my Netezza NPS reboots. Would someone please let me know what is causing this behaviour?
select avg ( bse.WEEKS_BETWEEN_RESPONSES_HR ) as g_AVG
, sqlext.median( bse.WEEKS_BETWEEN_RESPONSES_HR ) as g_med
from (
select WEEKS_BETWEEN_RESPONSES_HR
FROM (
select distinct LOYALTY_ACCOUNT_CARD_ID
, BONUS_END_DATE
, LAG(BONUS_END_DATE,1) OVER (partition by LOYALTY_ACCOUNT_CARD_ID order by BONUS_END_DATE) as PRIOR_BONUS_END_DATE
,(( BONUS_END_DATE - PRIOR_BONUS_END_DATE)/7) as WEEKS_BETWEEN_RESPONSES_HR
from JO_ACT_PTD_STEP_1 bse
where upper ( bonus_desc ) like '%SPEND%'
and redemption = 1
) BSE
where WEEKS_BETWEEN_RESPONSES_HR is not null and WEEKS_BETWEEN_RESPONSES_HR > 0
) bse limit 500 ```
You need to call the support people at IBM
There is probably a stack trace or a dump file somewhere that will tell them what happened
If I was experiencing your problem I would remove each of the function calls one by one and make the sql simpler and simpler until the error disappeared
But of course you will need to do that in the middle of the night or at a time when nobody else is being bothered by the constant re-boots
The where clause in the below hive query is not working
select
e.num as badge
from dbo.events as e
where TO_DATE(e.event_time_utc) > TO_DATE(select event_date from DL_EDGE_LRF_facilities.card_swipes_lastpulldate)
both event_time_utc and event_date fields are defined as strings and event_time_utc has timestamp values like '2017-09-18 20:10:19.000000' and event_date has only one date value like '2018-01-25'
i am getting an error like "cannot recognize input near 'select' 'event_date' 'from' in function specification " when i run the query, Please help
#user86683; hive does not recognize the syntax since it does not allow in-query in the inequality condition (>). You may try this query and let me know the result.
select e.num as badge
from dbo.events as e, DL_EDGE_LRF_facilities.card_swipes_lastpulldate c
where TO_DATE(e.event_time_utc) > TO_DATE(c.event_date)
You will get a warning but you may ignore it since the table for event_date has only one record.
Warning: Map Join MAPJOIN[10][bigTable=e] in task 'Map 1' is a cross product
Query ID = xxx_20180201102128_aaabb2235-ee69275cbec1
Total jobs = 1
Launching Job 1 out of 1
Status: Running (Executing on YARN cluster with App id application_09fdf345)
Hope this helps. Thanks.
Edit: Tidied up the query a bit. Checked running on one day (versus the 27 I need) and the query runs. With 27 days of data it's trying to process 5.67TB. Could this be the issue?
Latest ID of error run:
Job ID: ee-corporate:bquijob_3f47d425_1530e03af64
I keep getting this error message when trying to run a query in BigQuery, both through the UI and Bigrquery.
Query Failed
Error: An internal error occurred and the request could not be completed.
Job ID: ee-corporate:bquijob_6b9bac2e_1530dba312e
Code below:
SELECT
CASE WHEN d.category_grouped IS NULL THEN 'N/A' ELSE d.category_grouped END AS category_grouped_cleaned,
COUNT(UNIQUE(msisdn_token)) AS users,
(SUM(up_link_data_bytes) + SUM(down_link_data_bytes))/1000000 AS tot_data_mb
FROM (
SELECT
request_domain, up_link_data_bytes, down_link_data_bytes, msisdn_token, timestamp
FROM (TABLE_DATE_RANGE([helpful-skyline-97216:WEBLOG_Staging.WEBLOG_], TIMESTAMP('20160101'), TIMESTAMP('20160127')))
WHERE SUBSTR(http_status_code,1,1) IN ('1',
'2',
'3')) a
LEFT JOIN EACH web_usage_201601.domain_to_cat_lookup_27JAN_with_groups d
ON
a.request_domain = d.request_domain
WHERE
DATE(timestamp) >= '2016-01-01'
AND DATE(timestamp) <= '2016-01-27'
GROUP EACH BY
1
Is there something I'm doing wrong?
The problem seems to be coming from UNIQUE() - it returns repeated field with too many elements in it. The error could be improved, but workaround for you would be to use explicit GROUP BY and then run COUNT on top of it.
If you are okay with an approximation, you can also use
COUNT(DISTINCT msisdn_token) AS users
or a higher approximation parameter than the default 1000,
COUNT(DISTINCT msisdn_token, 5000) AS users
GROUP BY is the most general approach, but these can be faster if they do what you need.
I'm fairly new to Access so this is driving me a little crazy.
I'm creating an inventory database and want to count the number of items in stock to update an ordering form. Received items are assigned an order code, and I want to count the number of instances of each order code found within the master table. I have a make table query which does this just fine:
SELECT PrimerList.PrimerName
, First(Primer_Master.FR) AS FR
, Primer_Master.OrderCode
, Count(Primer_Master.OrderCode) AS InStock
INTO PrimerOrder
FROM PrimerList
LEFT JOIN Primer_Master ON PrimerList.ID = Primer_Master.PrimerName
GROUP BY PrimerList.PrimerName
, Primer_Master.OrderCode
, Primer_Master.PrimerName
, Primer_Master.FR
, Primer_Master.Finished
HAVING ((([Primer_Master]![Finished])=No));
I want to use PrimerOrder to update an order list table PrimerOrderList which has all of the different possible order codes, updating the InStock value for records with matching OrderCode:
UPDATE PrimerOrderList
SET PrimerOrderList.InStock = PrimerOrder.InStock
WHERE (((PrimerOrderList.OrderCode)=[PrimerOrder].[OrderCode]));
However, when I try to run it I get parameter boxes which pop-up asking for PrimerOrder.OrderCode and PrimerOrderList.OrderCode. Even if I put in a valid value for each, I get a type conversion failure. I've checked the data types for both tables and don't see how there could be a type conversion failure - both are set to text.
Any insight would be greatly appreciated! Thanks in advance!
You haven't included the PrimerOrder table in your query. Should be:
UPDATE PrimerOrderList INNER JOIN PrimerOrder
ON PrimerOrderList.OrderCode = PrimerOrder.OrderCode
PrimerOrderList.InStock = PrimerOrder.InStock
Firstly, I know ORA-000937 is a common issue, with an obvious answer, but I am yet to find any results that could point to a possible solution.
Quick Spec;
National TB/HIV report, based on patient medical records/encounters/visits and drug's provided. This is only a tiny portion of the report, which loops all patient drugs, and calculates most of it's figures off date calculations, we do not store historic/aggregated data, everything is aggregated when requested. I mention this because I expect a few suggestions to move away from GTT's and to rather use MVIEW's - I hear you, but no, not a solution.
Here is my problem, this is one of my queries populating a GTT, within a function, which stores aggregated results. I have structured my data collection in such away as to reduce server load as the medical table exceeds 12 million records. (Each patient has 3 per default).
Here is the GTT
CREATE GLOBAL TEMPORARY TABLE EKAPAII.TEMP_ART_VISIT_MEDS
(
EPISODE_ID NUMBER,
LAST_MEDS_DATE DATE
)
ON COMMIT DELETE ROWS
RESULT_CACHE (MODE DEFAULT)
NOCACHE;
CREATE UNIQUE INDEX EKAPAII.TEMP_ART_VISIT_MEDS_PK ON EKAPAII.TEMP_ART_VISIT_MEDS
(EPISODE_ID);
ALTER TABLE EKAPAII.TEMP_ART_VISIT_MEDS ADD (
CONSTRAINT TEMP_ART_VISIT_MEDS_PK
PRIMARY KEY
(EPISODE_ID)
USING INDEX EKAPAII.TEMP_ART_VISIT_MEDS_PK
ENABLE VALIDATE);
And my simple insert query
INSERT INTO temp_art_visit_meds (EPISODE_ID, LAST_MEDS_DATE)
SELECT episode_id, encounter_date + number_of_days
FROM ( SELECT enc_meds.episode_id,
MAX (enc_meds.encounter_date) encounter_date,
MAX (
CASE
WHEN (NVL (meds.number_of_days, 0) > 150)
THEN
90
ELSE
NVL (meds.number_of_days, 0)
END)
number_of_days
FROM temp_art_visit enc_meds,
vd_medication meds,
dl_drugs_episode_class dlc,
( SELECT latest_meds_visit.episode_id,
MAX (latest_meds_visit.encounter_date)
encounter_date
FROM temp_art_visit latest_meds_visit,
vd_medication latest_meds,
dl_drugs_episode_class dc
WHERE latest_meds_visit.encounter_id =
latest_meds.encounter_id
AND latest_meds.drug_id = dc.drug_id
AND dc.sd_drug_application_id = 8401
GROUP BY latest_meds_visit.episode_id) latest_meds
WHERE enc_meds.encounter_id = meds.encounter_id
AND enc_meds.episode_id = latest_meds.episode_id
AND enc_meds.encounter_date =
latest_meds.encounter_date
AND meds.drug_id = dlc.drug_id
AND dlc.sd_drug_application_id = 8401
AND meds.active_flag = 'Y'
GROUP BY enc_meds.episode_id);
Now my error, is ORA-000937 not a single-group group function, but if I run this query in a normal editor window it works, but I get ORA-000937 when executing the select query in the package body itself, calling the function does not return any error, even though I have an exception block to handle any errors.
Any help will do, I do understand that this errors could occur only at runtime, and not at compile time? Or is it the fact that I am running the query from the pl/sql block?
Toad for Oracle version 12.5 - in all it's glory. (sarcasm)
Again, pardon me if this has already been asked/answered.
EDIT - SOLUTION
So, after a few hours of trouble shooting, I was able to understand why this error is being generated. Firstly, the fixed query;
INSERT INTO temp_art_visit_meds (EPISODE_ID, LAST_MEDS_DATE)
SELECT enc_meds.episode_id ,
TRUNC( MAX (enc_meds.encounter_date)) + MAX (CASE WHEN (NVL (meds.number_of_days, 0) > 150) THEN 90 ELSE NVL (meds.number_of_days, 0) END) last_meds_date
FROM temp_art_visit enc_meds,
vd_medication meds,
dl_drugs_episode_class dlc,
( SELECT latest_meds_visit.episode_id,
MAX (latest_meds_visit.encounter_date) encounter_date
FROM temp_art_visit latest_meds_visit,
vd_medication latest_meds,dl_drugs_episode_class dc
WHERE latest_meds_visit.encounter_id = latest_meds.encounter_id
AND latest_meds.drug_id = dc.drug_id
AND dc.sd_drug_application_id = 8401
GROUP BY latest_meds_visit.episode_id) latest_meds
WHERE enc_meds.encounter_id = meds.encounter_id
AND enc_meds.episode_id = latest_meds.episode_id
AND enc_meds.encounter_date = latest_meds.encounter_date
AND meds.drug_id = dlc.drug_id
AND dlc.sd_drug_application_id = 8401
AND meds.active_flag = 'Y'
GROUP BY enc_meds.episode_id, meds.number_of_days, enc_meds.encounter_date;
It would appear that problem was due to the amount of sub-queries, I attempted to use different hint optimizers with no avail. If you look closely at the first query, you will notice I am basically aggregating results from aggregated results, so the column's encounter_date, episode_id, number_of_days are no longer 'available', so even if I added the appropriate GROUP BY clause to my last (outer) subquery, Oracle would not be able to group on those column names/identifiers.
I am not sure why this would fail only in a PACKAGE BODY, and did not return any SQLERR or SQLCODE when executed.
Happy days.