I am a bit confused that Apache httpd.conf not in the /usr/local/etc/ anymore, because there is no visible etc/ folder in the local. It's being empty. So did a bit search and found the a httpd.conf in the /etc/apache2/httpd.conf not very sure it is the right file, because it looks bit different. Anyway the below issue started after loading brew install httpd
httpd error LaunchAgents/homebrew.mxcl.httpd.plist
when I use the command brew services start httpd it gives the message of ==> Successfully started httpd (label: homebrew.mxcl.httpd) but when I check the services list I see the httpd error. And when I try to reach localhost I see It works message but when I refresh the page no more It works message and I only see the localhost refused to connect.
what is the correct way to install and run the apache?
Related
I install Zend server CE 5.6. With that Apache is installed automatically. Now I want to restart Apache server then it is showing error
click here for image to see exact error
any help
why i cannot restart apache httpd service.....?
Well you got some syntax error in httpd.conf and zedserver_php.conf.
For libphp5.so, check if the user apache can access to usr/local/zend/lib/apache2/libphp5.so.
First look, I think you have some error in httpd.conf and zedserver_php.conf and that apache can't access to httpd.conf and zedserver_php.conf.
I have a Virtual Server. Till yesterday everything works fine on it.
Today my Hostcompany restarted my server to config something on I/O.
When I trying to get to my address I get
Welcome to nginx!
If you see this page, the nginx web server is successfully installed and working. Further configuration is required.
For online documentation and support please refer to nginx.org.
Commercial support is available at nginx.com.
Thank you for using nginx.
I tried to sudo service apache2 start and get these Error Message:
* Starting web server apache2
(98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
AH00015: Unable to open logs
Action 'start' failed.
The Apache error log may have more information.
*
* The apache2 instance did not start within 20 seconds. Please read the log files to discover problems
Does someone know how I can fix this problem?
Stop Nginx service nginx stop
Restart Apache service apache2 restart
You have another webserver that's running on the host (probably as part of the startup during the restart) You need to shut that off first.
You can run netstat -tulpn | grep :80 and that'll tell you what that process is
The problem is this, Nginx (another web server engine) it's using your port 80 so apache it's unable to start, a fast fix it turn of nginx and then restart apache.
You can do it with service nginx stop and service apache2 restart if you are using Ubuntu or Debian based release, if you are using an RHEL distro then use service nginx stop and service httpd restart
Here is my solution
first: sudo update-rc.d -f nginx remove
than: sudo rm /etc/init.d/nginx
after restarting VM almost everything works fine. Some strange thing is almost there.
When I goto www.myfoobarwebpage.com now apache is working and it's all ok!
When I goto myfoobarwebpage.com (without www.) I get "Welcome to nginx! ..."
Try this. My Apache config has 2 extra lines by mistake.
"Include conf/extra/httpd-8080.conf"
"Include conf/extra/httpd-8080.conf"
Therefore, it was saying address already in use because it already loaded the Virtual host once and was trying again.
Solution was to delete this extra line and have only one include.
Yesterday I was able to completely normally use PHP and phpmyadmin with XAMPP and make apps. The only thing changed is that I restarted the computer. Now I start lampp like always
sudo /opt/lampp/lampp start
and I get
XAMPP: Starting Apache...fail.
XAMPP: Another web server is already running.
XAMPP: Starting MySQL...ok.
XAMPP: Starting ProFTPD...ok.
Maybe the apache is the problem I don't know. But when I open localhost in browser, I get
Forbidden
You don't have permission to access / on this server.
Apache/2.4.7 (Ubuntu) Server at localhost Port 80
I added 'Require all granted' to that httpd.conf file, and it didn't help, so something else must be going on. I tried a lot of other threads on forums, nothing helped.
Ideas?
Thanks
It could be possibly because another instance of Apache is running on your system. Just try to close all intances via sudo killall -9 apache2 and then try to start/restart the LAMPP.
Most linux OS ships Apache as default server, so if you even haven't installed them, they might be running in your system.
When I'm trying to start the Apache 2.2 server it is showing the following message: The Requested Operation has failed
In command Prompt it is showing as follows:
C:\Documents and Settings\amth>net start apache2.2
The Apache2.2 service is starting.
The Apache2.2 service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
Open run( win + r ) in windows and then type services.msc. Search for Apache service. Double click on the service and select any startup type other than disabled. This should work like a charm.
Open conf folder then open httpd.conf file in your text editor.
Find this line:
Listen 12.34.56.78:80
Listen 80
and change it to
Listen 12.34.56.78:80
Listen 8080
Then hit save
I have wasted a whole day on figuring out why curl_init() threw an undefined-error. Im using Windows, Apache 2.4 and PHP 7.3
After trying to:
Install a fresh version of Curl As described in this post
Enabe Curl in the php.ini file following this description
I still got this error.
The solution was to add the directory of the php e.g c:php/ to the PATH Variable in the Windows environment variables.
->Hit the Windows-Key and S
-> search for "System"
-> go to advanced options(a small window shuld pop up)
-> hit environment variables
-> in the **bottom** box scroll until you find "PATH"
-> select it and hit "edit"
-> enter the php directory and close the window
-> reboot your PC
Hopefully it will work for you too :)
Have you done any changes in httpd.conf file ? i was also facing same problem in my case i have saved httpd.conf file as txt so due to that i was getting error
Was getting this issue when trying to start Apache with mod_jk. As part of loadmodule in http.conf file LoadModule jk_module modules/mod_jk.so was added but in Apache2.2\modules folder mod_jk.so file was not available. Added mod_jk.so file to modules folder and apache started without any issues.
Here is what I did - if you uninstall and reinstall apache via command prompt it
httpd -k unistall/httpd -k install
then it displays the errors
in my case the require all was missing 'granted' at the end of to look like 'require all granted'
<Directory />
AllowOverride all
Require all
</Directory>
If your lan ip changed then you would come across this error. In the httpd conf file you to rectify the following:
Listen IP:Port
I ran into the same error message on Windows Server 2008 R2. I was using SSL and realized that my signer certs, configured in ssl.conf, where placed in the wrong folders on the file system. I placed the certs in the correct spot and the service and Apache was working fine afterwards.
I've tried closing World Wide Web services, changing a lot of ports and surfing many forums, and eventually I looked in to Logs=>Apache (error.log) files.
I saw in this error:
PHP Fatal error: Directive 'asp_tags' is no longer available in PHP in Unknown on line 0
Then I opened php.ini files in XAMPP. Find with ctrl+f asp_tags=On line and turn it to Off.
All of it then worked.
In my case Apache 2.4 is worked on Win7Pro 64bit. Last week it worked fine but today I was unable to start it as usually. I tried to check logs for errors but no clue. Then I went to Control panel -> Administrative tools -> Services and found there Apache service was disabled!? Click on property, set Startup type to manual and - voila! It started like charm.
I have a new server running CentOS, and it has httpd running on 192.168.1.100:80.
I can connect to my server through ssh on 192.168.1.100, but when I go to 192.168.1.100 in my browser, it says "Oops! Google Chrome could not connect to 192.168.1.100".
I also tried wget to see if that works, and here is where it gets interesting.
when I run:
wget 192.168.1.100
On my server it gets the index.html file as it should.
but when I run it on my laptop is says "Connecting to 192.168.1.100:80... failed: No route to host."
Does anyone know how to fix this?
Seems like your Apache configuration binds httpd to 192.168.1.100:80
Find line Listen 192.168.1.100:80 in Apache main configuration - something like /etc/httpd/httpd.conf or /etc/apache2/httpd.conf and change this line to Listen 0.0.0.0:80.
Restart Apache and it will probably work.