while pod install am facing issue like
[!] Error installing DoubleConversion
[!] /usr/bin/git clone https://github.com/google/double-conversion.git /var/folders/ty/c2bpzbq14kx5769qhwfpys400000gn/T/d20220507-13058-82ib6w --template= --single-branch --depth 1 --branch v1.1.6
Cloning into '/var/folders/ty/c2bpzbq14kx5769qhwfpys400000gn/T/d20220507-13058-82ib6w'...
fatal: remote error:
The unauthenticated git protocol on port 9418 is no longer supported.
Please see https://github.blog/2021-09-01-improving-git-protocol-security-github/ for more information.
how i can clear this issue, expo bare, ios
I want to push a Ruby on Rails app to heroku. But it gets stuck.
remote: Running: bundle install --without development:test --path vendor/bundle --binstubs vendor/bundle/bin -j4 --deployment
remote: Some gems seem to be missing from your vendor/cache directory.
remote: Could not find aws-eventstream-1.1.0 in any of the sources
remote: Bundler Output: Some gems seem to be missing from your vendor/cache directory.
remote: Could not find aws-eventstream-1.1.0 in any of the sources
remote:
remote: !
remote: ! Failed to install gems via Bundler.
remote: !
remote: ! Push rejected, failed to compile Ruby app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to pure-crag-52432.
remote:
To https://git.heroku.com/pure-crag-52432.git
! [remote rejected] user-microposts -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/pure-crag-52432.git'
Apart from the fact that I don't know why heroku asks for the aws-eventstream-1.1.0 gem (because it is not in the Gemfile). I am not sure in how to fill in the field below for the storage.yml as given in this guide:
.
amazon:
service: S3
access_key_id: <%= ENV['AWS_ACCESS_KEY_ID'] %>
secret_access_key: <%= ENV['AWS_SECRET_ACCESS_KEY'] %>
region: <%= ENV['AWS_REGION'] %>
bucket: <%= ENV['AWS_BUCKET'] %>
Should I just leave it as it is and will the heroku configuration automatically be linked to this file?
I tried this (of course I changed all the answers a bit):
amazon:
service: S3
access_key_id: AKIAXOOFZZFFKMQD3CFD
secret_access_key: Cj8BcL452tDer5ryTPBRlan5LHOq76WXgvTDHmvc
region: region=eu-east-3
bucket: rails-tutorial-joost
These are my Heroku configurations:
➜ sample_app git:(user-microposts) heroku config
› Warning: heroku update available from 7.42.2 to 7.42.6.
=== pure-crag-52432 Config Vars
AWS_ACCESS_KEY_ID: AKIAXOOFOGFKKMQD3CFE
AWS_BUCKET: rails-tutorial-joost
AWS_REGION: region=eu-east-3
AWS_SECRET_ACCESS_KEY: Ci8BcL452tcxDer5ryTPBRlan5LHOq76WXgvTDHmvc
DATABASE_URL: postgres://blohftwliwefcg:6cfd2ccz2cc27301f86a1fe3c4686bb77784e67a62312d55c7e5751dfd61331c156#ec2-34-192-173-173.compute-1.amazonaws.com:5432/davr7msm9qlqh1
LANG: en_US.UTF-8
RACK_ENV: production
RAILS_ENV: production
RAILS_LOG_TO_STDOUT: enabled
RAILS_MASTER_KEY: ./config/credentials/production.key
RAILS_SERVE_STATIC_FILES: enabled
SECRET_KEY_BASE: 32c6c8d057cc6c61071f18429e64zxczxc337d795bfa81abd04ed3e74377eff9e6cddb024967e6a0ffb9bc7de55b408ad71291ab5e518bcfe20bb5a7b44871d570cc61
SENDGRID_PASSWORD: bdsk6q67625964
SENDGRID_USERNAME: appasd6786712#heroku.com
I found a solution at the site of the heroku helpcenter:
If you are getting this output while upgrading:
remote: Bundler Output: You are trying to install in deployment mode after changing
remote: your Gemfile. Run bundle install elsewhere and add the
remote: updated Gemfile.lock to version control.
But locally running bundle install does not change your Gemfile.lock please make sure you’re using a recent version of bundler locally. We recommend 1.13.7 or above. Once you have upgraded your local bundler version please re-run bundle install and commit the results to git before deploying again.
If running bundle install and committing the results does not resolve the issue, check to see if you have any custom gem sources that use an ENV var. For example:
source "https://#{ENV['GEMFURY_URL'}#gem.fury.io/some-value-here/"
If you are using an ENV var to specify a username or password for a source in your Gemfile, make sure you are running bundle install locally with the same ENV var. Also verify and that the full URL including any username or password is present in your Gemfile.lock after bundling.
If you do not wish for your username and password to be checked into git, consider using bundler’s built in support for configuring username and password via a special ENV var.
Specifying BUNDLE_GEMFILE with relative path may not work https://github.com/bundler/bundler/pull/5815.
when I was reading the 'Workflow Distribution and Deployment' about snakemake, I found that I can't clone the working directory, because the link is wrong. After running the command, it promotes:
remote: Not Found
fatal: repository 'https://bitbucket.org/user/myworkflow.git/' not found
I download the tensorflow from https://github.com/tensorflow/tensorflow/tree/master/tensorflow/examples/ios
And then install it step by step.
When I install pod, there is an ERROR:
Is the TensorFlow-experimental being renamed or Somethins wrong ?
I had the same issue. I ended up reinstalling and updating to the most current version of CocoaPods(1.2.1)
tensorflow/examples/ios/simple/ $ pod install
Analyzing dependencies
[!] Unable to find a specification for `TensorFlow-experimental`
tensorflow/examples/ios/simple/ $ pod repo remove master
Removing spec repo `master`
tensorflow/examples/ios/simple/ $ pod setup
Setting up CocoaPods master repo
$ /usr/bin/git clone https://github.com/CocoaPods/Specs.git master --progress
Cloning into 'master'...
remote: Counting objects: 1342352, done.
remote: Compressing objects: 100% (2372/2372), done.
remote: Total 1342352 (delta 1560), reused 2050 (delta 796), pack-reused 1339018
Receiving objects: 100% (1342352/1342352), 405.31 MiB | 370.00 KiB/s, done.
Resolving deltas: 100% (673537/673537), done.
Checking out files: 100% (162776/162776), done.
CocoaPods 1.3.0.beta.1 is available.
To update use: `gem install cocoapods --pre`
[!] This is a test version we'd love you to try.
For more information, see https://blog.cocoapods.org and the CHANGELOG for this version at https://github.com/CocoaPods/CocoaPods/releases/tag/1.3.0.beta.1
Setup completed
tensorflow/examples/ios/simple/ $ pod install
Analyzing dependencies
Downloading dependencies
Installing TensorFlow-experimental (1.1.1)
Generating Pods project
Integrating client project
[!] Please close any current Xcode sessions and use `tf_simple_example.xcworkspace` for this project from now on.
Sending stats
Pod installation complete! There is 1 dependency from the Podfile and 1 total pod installed.
tensorflow/examples/ios/simple/ $ pod --version
1.2.1
You can add the repo search path to the head of your Podfile.
source 'git#git#github.com:CocoaPods/Specs.git'
And pod install again.
Close Xcode.
In terminal at root of project, where the pod file lives,
issue command "pod update"
first time, and after any update.
MacBook-Pro-2:camera $ pod install
Analyzing dependencies
[!] Unable to find a specification for `TensorFlow-experimental`
MacBook-Pro-2:camera $ pod update
Update all pods
Updating local specs repositories
$ /usr/bin/git -C /Users/XXXXXX/.cocoapods/repos/master fetch origin
--progress
remote: Counting objects: 2006922, done.
remote: Compressing objects: 100% (403/403), done.
remote: Total 2006922 (delta 3740), reused 3789 (delta 3625), pack-reused 2002871
Receiving objects: 100% (2006922/2006922), 511.53 MiB | 665.00 KiB/s, done.
Resolving deltas: 100% (1146145/1146145), completed with 960 local objects.
From https://github.com/CocoaPods/Specs
58e4aaa8dab..224ab2278f7 master -> origin/master
* [new branch] backz -> origin/backz
* [new branch] predates_sharding_branch -> origin/predates_sharding_branch
* [new branch] swift_version_support -> origin/swift_version_support
* [new tag] v0.32.1 -> v0.32.1
* [new tag] 20161019 -> 20161019
$ /usr/bin/git -C /Users/XXXXXXX/.cocoapods/repos/master rev-parse
--abbrev-ref HEAD
master
$ /usr/bin/git -C /Users/XXXXXXX/.cocoapods/repos/master reset --hard
origin/master
HEAD is now at 224ab2278f7 [Add] Taplytics_tvOS 2.25.2
warning: inexact rename detection was skipped due to too many files.
Analyzing dependencies
Downloading dependencies
Installing TensorFlow-experimental (1.1.1)
Generating Pods project
Integrating client project
[!] Please close any current Xcode sessions and use `tf_camera_example.xcworkspace` for this project from now on.
Sending stats
Pod installation complete! There is 1 dependency from the Podfile and 1 total pod installed.
I'm trying to install Odoo in Openshift using the instructions available at https://github.com/dreispt/openshift-odoo-quickstart. When executing the final push, I get the following errors:
remote: rm: cannot remove '/var/lib/openshift/5905d54d7628e1e3050000d7//OCA-OCB*': No such file or directory
remote: rm: cannot remove '/var/lib/openshift/5905d54d7628e1e3050000d7//app-root/data/odoo-repo/doc': No such file or directory
remote: rm: cannot remove '/var/lib/openshift/5905d54d7628e1e3050000d7//app-root/data/odoo-repo/setup': No such file or directory
remote: An error occurred executing 'gear postreceive' (exit code: 1)
remote: Error message: CLIENT_ERROR: Failed to execute action hook 'build' for 5905d54d7628e1e3050000d7 application odoo