i am trying to update a colleague's MS Access application (with vb-code). I am rather experienced in writing SQL queries but i am not able to solve the following problem.
The query i am looking to fix uses a pass-through-query's result and a local MS Access table and joins them togehter in the where-clause (i tried using the normal way with ON but it seems this doesn't work when there is a pass through query involved). I have little experience with joining tables in the where-clause but is there such a thing that i cant use certain columns (of both tables) in the where-clause when joining tables in the where-clause? -> When i use a filter criteria such as columnA <> 'somerandomtext' (which is always satisfied, just to point out the problem) the query result is empty. When i delete the latter criteria in the where clause, the query returns results (although too many because i cant filter them accordingly).
Furthermore: I checked the pass-through-query, the results are correct. I checked the MS-Access table, the data in the table is correct. Therefore, i think i might be doing something wrong in the query where i join the two mentioned above.
THIS QUERY WORKS AS INTENDED AND RETURNS RESULTS:
SELECT t.tr_id, t.ser_num, t.contrgnt_id, t.pos_ekey, t.sernum AS cmdty, format(t.vol,""##,###,###.00"") AS volume, t.unit_def, t.value_date,
format(t.coup,""##,###,###.00"") AS fixprice,
format(s.calcvarprice,""##,###,###.00"") AS marketprice,
format(s.calcamount,""##,###,###.00"") AS payamount,
format(s.settlevarprice, ""##,###,##0.00"") as settleprice,
format(s.settleamount, ""##,###,##0.00"") as settleamount, s.sync
FROM pms_trans AS t, settledata AS s
WHERE t.tr_id=s.tr_id And t.is_booked='N' And t.value_date>='01.01.2021' And t.value_date<='01.04.2021'
THIS QUERY SOMEHOW RETURNS 0 RESULTS:
SELECT t.tr_id, t.ser_num, t.contrgnt_id, t.pos_ekey, t.sernum AS cmdty, format(t.vol,""##,###,###.00"") AS volume, t.unit_def, t.value_date,
format(t.coup,""##,###,###.00"") AS fixprice,
format(s.calcvarprice,""##,###,###.00"") AS marketprice,
format(s.calcamount,""##,###,###.00"") AS payamount,
format(s.settlevarprice, ""##,###,##0.00"") as settleprice,
format(s.settleamount, ""##,###,##0.00"") as settleamount, s.sync
FROM pms_trans AS t, settledata AS s
WHERE t.tr_id=s.tr_id And t.is_booked='N' And t.pos_ekey <> 'BGGS' And t.value_date>='01.01.2021' And t.value_date<='01.04.2021'
As mentioned before, i suspect that there are some limitations when joining via where-clause (although i didnt find sufficient information online).
Best Regards and thank you in advance,
Peter
First, apply the correct syntax for the date expressions:
WHERE t.tr_id=s.tr_id And t.is_booked='N' And t.pos_ekey <> 'BGGS' And t.value_date >= #2021-01-01# And t.value_date <= #2021-04-01#
Next, double-check the values for pos_ekey. For example, try to apply the filter, <> 'BGGS', directly on the field in table view.
Related
I'm stuck in an (apparently) extremely trivial task that I can't make work , and I really feel no chance than to ask for advice.
I used to deal with PHP/MySQL more than 10 years ago and I might be quite rusty now that I'm dealing with an SQLite DB using Qt5.
Basically I'm selecting some records while wanting to make some math operations on the fetched columns. I recall (and re-read some documentation and examples) that the keyword "AS" is going to conveniently rename (alias) a value.
So for example I have this query, where "X" is an integer number that I render into this big Qt string before executing it with a QSqlQuery. This query lets me select all the electronic components used in a Project and calculate how many of them to order (rounding to the nearest multiple of 5) and the total price per component.
SELECT Inventory.id, UsedItems.pid, UsedItems.RefDes, Inventory.name, Inventory.category,
Inventory.type, Inventory.package, Inventory.value, Inventory.manufacturer,
Inventory.price, UsedItems.qty_used as used_qty,
UsedItems.qty_used*X AS To_Order,
ROUND((UsedItems.qty_used*X/5)+0.5)*5*CAST((X > 0) AS INT) AS Nearest5,
Inventory.price*Nearest5 AS TotPrice
FROM Inventory
LEFT JOIN UsedItems ON Inventory.id=UsedItems.cid
WHERE UsedItems.pid='1'
ORDER BY RefDes, value ASC
So, for example, I aliased UsedItems.qty_used as used_qty. At first I tried to use it in the next field, multiplying it by X, writing "used_qty*X AS To_Order" ... Query failed. Well, no worries, I had just put the original tab.field name and it worked.
Going further, I have a complex calculation and I want to use its result on the next field, but the same issue popped out: if I alias "ROUND(...)" AS Nearest5, and then try to use this value by multiplying it in the next field, the query will fail.
Please note: the query WORKS, but ONLY if I don't use aliases in the following fields, namely if I don't use the alias Nearest5 in the TotPrice field. I just want to avoid re-writing the whole ROUND(...) thing for the TotPrice field.
What am I missing/doing wrong? Either SQLite does not support aliases on the same query or I am using a wrong syntax and I am just too stuck/confused to see the mistake (which I'm sure it has to be really stupid).
Column aliases defined in a SELECT cannot be used:
For other expressions in the same SELECT.
For filtering in the WHERE.
For conditions in the FROM clause.
Many databases also restrict their use in GROUP BY and HAVING.
All databases support them in ORDER BY.
This is how SQL works. The issue is two things:
The logic order of processing clauses in the query (i.e. how they are compiled). This affects the scoping of parameters.
The order of processing expressions in the SELECT. This is indeterminate. There is no requirement for the ordering of parameters.
For a simple example, what should x refer to in this example?
select x as a, y as x
from t
where x = 2;
By not allowing duplicates, SQL engines do not have to make a choice. The value is always t.x.
You can try with nested queries.
A SELECT query can be nested in another SELECT query within the FROM clause;
multiple queries can be nested, for example by following the following pattern:
SELECT *,[your last Expression] AS LastExp From (SELECT *,[your Middle Expression] AS MidExp FROM (SELECT *,[your first Expression] AS FirstExp FROM yourTables));
Obviously, respecting the order that the expressions of the innermost select query can be used by subsequent select queries:
the first expressions can be used by all other queries, but the other intermediate expressions can only be used by queries that are further upstream.
For your case, your query may be:
SELECT *, PRC*Nearest5 AS TotPrice FROM (SELECT *, ROUND((UsedItems.qty_used*X/5)+0.5)*5*CAST((X > 0) AS INT) AS Nearest5 FROM (SELECT Inventory.id, UsedItems.pid, UsedItems.RefDes, Inventory.name, Inventory.category, Inventory.type, Inventory.package, Inventory.value, Inventory.manufacturer, Inventory.price AS PRC, UsedItems.qty_used*X AS To_Order FROM Inventory LEFT JOIN UsedItems ON Inventory.id=UsedItems.cid WHERE UsedItems.pid='1' ORDER BY RefDes, value ASC))
I'm trying to query my database to pull only duplicate/old data to write to a scratch section in excel (Using a macro passing SQL to the DB).
For now, I'm currently testing in Access alone to only filter out the old data.
First, I'm trying to filter my database by a specifed WorkOrder, RunNumber, and Row.
The code below only filters by Work Order, RunNumber, and Row. ...but SQL doesn't like when I tack on a 2nd AND statement; so this currently isn't working.
SELECT *
FROM DataPoints
WHERE (((DataPoints.[WorkOrder])=[WO2]) AND ((DataPoints.[RunNumber])=6) AND ((DataPoints.[Row]=1)
Once I figure that portion out....
Then if there is only 1 entry with specified WorkOrder, RunNumber, and Row, then I want filter it out. (its not needed in the scratch section, because its data is already written to the main section of my report)
If there are 2 or more entries with said criteria(WO, RN, and Row), then I want to filter out the newest entry based on RunDate and RunTime, and only keep all older entries.
For instance, in the clip below. The only item remaining in my filtered query will be the top entry with the timestamp 11:47:00AM.
.
Are there any recommended commands to complete this problem? Any ideas are helpful. Thank you.
I would suggest something along the lines of the following:
select t.*
from datapoints t
where
t.workorder = [WO2] and
t.runnumber = 6 and
t.row = 1 and
exists
(
select 1
from datapoints u
where
u.workorder = t.workorder and
u.runnumber = t.runnumber and
u.row = t.row and
(u.rundate > t.rundate or (u.rundate = t.rundate and u.runtime > t.runtime))
)
Here, if the correlated subquery within the where clause finds a record with the same workorder, runnumber and row, but with either a later rundate or the same rundate and a later runtime, then the record is returned by the main query.
You need two more )'s at the end of your code snippet. Or you can delete the parentheses completely in this example, MS Access will ad them back in as it deems necessary.
M.S. Access SQL can be tricky as it is not standards compliant and either doesn't allow for super complex queries, or it needs an ugly work around, like having a parentheses nesting nightmare when trying to join more than two tables.
For these reasons, I suggest using multiple Access queries to produce your results.
I am working on a massive join at work and have very limited resources in terms of being able to add indexes and such as well as what I can do in the query itself due to the environment (i.e. I can only select data, no variables or table creations allowed). I have read somewhere that a subquery will automatically index the result, is this true? Also for my major join tables (3) each has ~140K rows. I have to join 2 extra tables to ensure filtering is correct. I have the query listed below which I currently have criteria on the JOIN clause. Another question is if I move my criteria to a where clause either in or out of the subquery will it benefit?
SELECT *
FROM (SELECT NULL AS A1,
DFS_ROHEADER.TECHID,
DFS_ROHEADER.RONUMBER,
DFS_ROHEADER.CUSTOMERNUMBER,
DFS_CUSTOMER.BNAME,
DFS_ROHEADER.UNITNUMBER,
DFS_ROHEADER.MILEAGE,
DFS_ROHEADER.OPENEDDATE,
DFS_ROHEADER.CLOSEDDATE,
DFS_ROHEADER.STATUS,
DFS_ROHEADER.PONUMBER,
DFS_TECH.REGION,
DFS_TECH.RSM,
DFS_ROPART.PARTID,
CONVERT(NVARCHAR(max), DFS_RODETAIL.STORY) AS STORY
FROM DFS_ROHEADER
LEFT JOIN DFS_CUSTOMER
ON DFS_ROHEADER.CUSTOMERNUMBER = DFS_CUSTOMER.CUST_NO
LEFT JOIN DFS_TECH
ON DFS_ROHEADER.TECHID = DFS_TECH.TECHID
INNER JOIN DFS_RODETAIL
ON DFS_ROHEADER.RONUMBER = DFS_RODETAIL.RONUMBER
INNER JOIN DFS_ROPART
ON DFS_RODETAIL.RONUMBER = DFS_ROPART.RONUMBER
AND DFS_RODETAIL.LINENUMBER = DFS_ROPART.LINENUMBER
AND DFS_ROHEADER.RONUMBER LIKE '%$FF_RONumber%'
AND DFS_ROHEADER.UNITNUMBER LIKE '%$FF_UnitNumber%'
AND DFS_ROHEADER.PONUMBER LIKE '%$FF_PONumber%'
AND ( DFS_CUSTOMER.BNAME LIKE '%$FF_Customer%'
OR DFS_CUSTOMER.BNAME IS NULL )
AND DFS_ROHEADER.TECHID LIKE '%$FF_TechID%'
AND DFS_ROHEADER.CLOSEDDATE BETWEEN
FF_ClosedBegin AND FF_ClosedEnd
AND ( DFS_TECH.REGION LIKE '%$FilterRegion%'
OR DFS_TECH.REGION IS NULL )
AND ( DFS_TECH.RSM LIKE '%$FF_RSM%'
OR DFS_TECH.RSM IS NULL )
AND DFS_RODETAIL.STORY LIKE '%$FF_Story%'
AND DFS_ROPART.PARTID LIKE '%$FF_PartID%'
WHERE DFS_ROHEADER.DELETED_BY < 0
AND DFS_RODETAIL.DELETED_BY < 0
AND DFS_ROPART.DELETED_BY < 0) T
ORDER BY T.RONUMBER
This query works; however, it can take forever to run, and can timeout. I have other queries that also run in the environment and I will take whatever you can give me in terms of suggestions and apply it to those. I am using SQLServer 2000, Thanks for the help.
EDIT:
Execution Plan:
https://dl.dropboxusercontent.com/u/99733863/ExecutionPlan.sqlplan
UPDATE:
I have come to the conclusion the environment I'm working in is the cause of the problem. My query works as intended and is not slow at all (1 sec. for 18,000 rows). As stated in the comments I have to fill grids with limited flexibility and I believe that these grids fill by first filling a temporary grid with the SQL statement and then copying row by row into the desired grid. There is a good chance that this is the cause of my issues. Thanks for the help.
I have come to the conclusion the environment I'm working in is the cause of the problem. My query works as intended and is not slow at all (1 sec. for 18,000 rows). As stated in the comments I have to fill grids with limited flexibility and I believe that these grids fill by first filling a temporary grid with the SQL statement and then copying row by row into the desired grid. There is a good chance that this is the cause of my issues. Thanks for the help everyone.
My 2 cents here.. In general LIKE is not very well optimized. In your case you also seem to be using LIKE with '%value%'. In that case the query optimizer has to scan the entire index. At a minimum I would see if there is a way to avoid using this.
I am using SQL server 2005, querying with Web Developer 2010, and the min function appears to be returning more than one value (for each ID returned, see below). Ideally I would like it to just return the one for each ID.
SELECT Production.WorksOrderOperations.WorksOrderNumber,
MIN(Production.WorksOrderOperations.OperationNumber) AS Expr1,
Production.Resources.ResourceCode,
Production.Resources.ResourceDescription,
Production.WorksOrderExcel_ExcelExport_View.PartNumber,
Production.WorksOrderOperations.PlannedQuantity,
Production.WorksOrderOperations.PlannedSetTime,
Production.WorksOrderOperations.PlannedRunTime
FROM Production.WorksOrderOperations
INNER JOIN Production.Resources
ON Production.WorksOrderOperations.ResourceID = Production.Resources.ResourceID
INNER JOIN Production.WorksOrderExcel_ExcelExport_View
ON Production.WorksOrderOperations.WorksOrderNumber = Production.WorksOrderExcel_ExcelExport_View.WorksOrderNumber
WHERE Production.WorksOrderOperations.WorksOrderNumber IN
( SELECT WorksOrderNumber
FROM Production.WorksOrderExcel_ExcelExport_View AS WorksOrderExcel_ExcelExport_View_1
WHERE (WorksOrderSuffixStatus = 'Proposed'))
AND Production.Resources.ResourceCode IN ('1303', '1604')
GROUP BY Production.WorksOrderOperations.WorksOrderNumber,
Production.Resources.ResourceCode,
Production.Resources.ResourceDescription,
Production.WorksOrderExcel_ExcelExport_View.PartNumber,
Production.WorksOrderOperations.PlannedQuantity,
Production.WorksOrderOperations.PlannedSetTime,
Production.WorksOrderOperations.PlannedRunTime
If you can get your head around it, I am selecting certain columns from multiple tables where the WorksOrderNumber is also contained within a subquery, and numerous other conditions.
Result set looks a little like this, have blurred out irrelevant data.
http://i.stack.imgur.com/5UFIp.png (Wouldn't let me embed image).
The highlighted rows are NOT supposed to be there, I cannot explicitly filter them out, as this result set will be updated daily and it is likely to happen with a different record.
I have tried casting and converting the OperationNumber to numerous other data types, varchar type returns '100' instead of the '30'. Also tried searching search engines, no one seems to have the same problem.
I did not structure the tables (they're horribly normalised), and it is not possible to restructure them.
Any ideas appreciated, many thanks.
The MIN function returns the minimum within the group.
If you want the minimum for each ID you need to get group on just ID.
I assume that by "ID" you are referring to Production.WorksOrderOperations.WorksOrderNumber.
You can add this as a "table" in your SQL:
(SELECT Production.WorksOrderOperations.WorksOrderNumber,
MIN(Production.WorksOrderOperations.OperationNumber)
FROM Production.WorksOrderOperations
GROUP BY Production.WorksOrderOperations.WorksOrderNumber)
I'm having trouble with Microsoft Access 2003, it's complaining about this statement:
select cardnr
from change
where year(date)<2009
group by cardnr
having max(time+date) = (time+date) and cardto='VIP'
What I want to do is, for every distinct cardnr in the table change, to find the row with the latest (time+date) that is before year 2009, and then just select the rows with cardto='VIP'.
This validator says it's OK, Access says it's not OK.
This is the message I get: "you tried to execute a query that does not include the specified expression 'max(time+date)=time+date and cardto='VIP' and cardnr=' as part of an aggregate function."
Could someone please explain what I'm doing wrong and the right way to do it? Thanks
Note: The field and table names are translated and do not collide with any reserved words, I have no trouble with the names.
Try to think of it like this - HAVING is applied after the aggregation is done.
Therefore it can not compare to unaggregated expressions (neither for time+date, nor for cardto).
However, to get the last (principle is the same for getting rows related to other aggregated functions as weel) time and date you can do something like:
SELECT cardnr
FROM change main
WHERE time+date IN (SELECT MAX(time+date)
FROM change sub
WHERE sub.cardnr = main.cardnr AND
year(date)<2009
AND cardto='VIP')
(assuming that date part on your time field is the same for all the records; having two fields for date/time is not in your best interest and also using reserved words for field names can backfire in certain cases)
It works because the subquery is filtered only on the records that you are interested in from the outer query.
Applying the same year(date)<200 and cardto='VIP' to the outer query can improve performance further.