In my ABAP report I have some structure:
data:
begin of struct1,
field1 type char10,
end of struct1.
I can access to it's field field1 directly:
data(val) = struct1-field1
or dynamically with assign:
assign ('struct1-field1') to field-symbol(<val>).
Also I have some internal table:
data: table1 like standard table of struct1 with default key.
append initial line to table1.
I can access to column field1 of first row directly:
data(val) = table1[ 1 ]-field1.
But I can not get access to field1 with dynamic assign:
assign ('table1[ 1 ]-field1') to field-symbol(<val>).
After assignment sy-subrc equals "4".
Why?
The syntax of ASSIGN (syntax1) ... is not the same as the syntax of the Right-Hand Side (RHS) of assignments ... = syntax2.
The syntax for ASSIGN is explained in the documentation of ASSIGN (variable_containing_name) ... or ASSIGN ('name') ... (chapter 1. (name) of page ASSIGN - dynamic_dobj).
Here is an abstract of what is accepted:
"name can contain a chain of names consisting of component selectors [(-)]"
"the first name [can be] followed by an object component selector (->)"
"the first name [can be] followed by a class component selector (=>)"
No mention of table expressions, so they are forbidden. Same for meshes...
Concerning the RHS of assignments, as described in the documentation, it can be :
Data Objects
They can be attributes or components using selectors -, ->, =>, which can be chained multiple times (see Names for Individual Operands
Return values or results of functional methods, return values or results of built-in functions and constructor expressions, or return values or results of table expressions
Results of calculation expressions
Sandra is absolutely right, if table expressions are not specified in help, then they are not allowed.
You can use ASSIGN COMPONENT statement for your dynamicity:
FIELD-SYMBOLS: <tab> TYPE INDEX TABLE.
ASSIGN ('table1') TO <tab>.
ASSIGN COMPONENT 'field1' OF STRUCTURE <tab>[ 1 ] TO FIELD-SYMBOL(<val>).
However, such dynamics is only possible with index tables (standard + sorted) due to the nature of this version of row specification. If you try to pass hashed table into the field symbol, it will dump.
I created two string variables (tot and tot_value) and assigned a value (tot = MyVal) for testing. Then I created an Execute SQL Task which takes (tot) as parameter and the value returned is saved in tot_value.
In the General Tab, i set:
ResultSet to Single row. SQL Source Type to Direct input Query is listed below.
In Parameter Mapping I selected my tot variable with Input DirectionSQL_VARCHAR Data Type 1 as Parameter Name (Since i am using ODBC)Size set to default -1.
In Result SetResult Name to 1Variable Name to tot_value.
If in the query I hard code 'MyVal' i get the correct result, however when I use ? to use my variable as a parameter, I always get a 0 returned.
Note that my tot variable is set to MyVal
Any clue of what I might be missing? Thanks in advance
select TOP 1 CAST('' + ISNULL((SELECT distinct type_of_transfer_code
FROM SYSTEM.history_program_transfer
WHERE type_of_transfer_value = ?),'') AS VARCHAR(100)) as type_of_transfer_code
FROM SYSTEM.table_facility_defaults
I am trying to read a table having five rows and columns. I have used sql.eachRow function to read eachRow and assign the value to a String. I am getting an error "Groovy:[Static type checking] - No such property: MachineName for class: java.lang.Object"
My code:
sql.eachRow('select * from [MACHINES] WHERE UpdateTime > :lastTimeRead, [lastTimeRead: Long.parseLong(lastTimeRead)])
{ row ->
def read = row.MachineName
}
but MachineName is my column name. How can i overcome this error.
Using dynamic Properties with static type checking is not possible*.
However, eachRow will pass a GroovyResultSet as first parameter to the Closure. This means that row has the type GroovyResultSet and so you can access the value using getAt
row.getAt('MachineName')
should work. In groovy you can also use the []-operator:
row['MachineName']
which is equivalent to the first solution.
*) without a type checking extension.
If you Know the Column name you can just use the Below.
"$row.MachineName"
But if you don't Know column name or having some issue, still it can be accessed using an array of Select.
sql.eachRow('select * from [MACHINES] WHERE UpdateTime > :lastTimeRead, [lastTimeRead: Long.parseLong(lastTimeRead)])
{ row->
log.info "First value = ${row[0]}, next value = ${row[1]}"
}
I'm attempting to write a program that will grab the content from fields from a table both specified by the user on the selection screen.
For example, the user could specify the fields equnr, b_werk, b_lager from the table eqbs.
I've been able to accomplish this like so:
" Determine list of fields provided by user
DATA(lv_fields) = COND string(
WHEN p_key3 IS NOT INITIAL AND p_string IS NOT INITIAL THEN
|{ p_key1 }, { p_key2 }, { p_key3 }, { p_string }|
WHEN p_key2 IS NOT INITIAL AND p_string IS NOT INITIAL THEN
|{ p_key1 }, { p_key2 }, { p_string }|
WHEN p_key2 IS NOT INITIAL AND p_string IS NOT INITIAL THEN
|{ p_key1 }, { p_string }| ).
DATA: lv_field_tab TYPE TABLE OF line.
APPEND lv_fields TO lv_field_tab.
" Determine table specified by user and prepare for Open SQL query
DATA t_ref TYPE REF TO data.
FIELD-SYMBOLS: <t> TYPE any,
<comp> TYPE any.
CREATE DATA t_ref TYPE (p_table).
ASSIGN t_ref->* TO <t>.
ASSIGN COMPONENT lv_fields OF STRUCTURE <t> TO <comp>.
" Prepare result container
DATA: lt_zca_str_to_char TYPE TABLE OF zca_str_to_char,
ls_zca_str_to_char TYPE zca_str_to_char.
SELECT (lv_field_tab) FROM (p_table) INTO (#ls_zca_str_to_char-key1, #ls_zca_str_to_char-key2, #ls_zca_str_to_char-key3, #ls_zca_str_to_char-string).
APPEND ls_zca_str_to_char TO lt_zca_str_to_char.
ENDSELECT.
This will correctly populate lt_zca_str_to_char with data from the table specified by the user.
However, this implies that the user is always providing p_key1, p_key2, and p_key3. I could perform a different selection statement based on how many key fields the user provides, but what's the fun in that?
I set out to solve this like this:
DATA(lv_results) = COND string(
WHEN p_key3 IS NOT INITIAL AND p_string IS NOT INITIAL THEN
|(#ls_zca_str_to_char-key1, #ls_zca_str_to_char-key2, #ls_zca_str_to_char-key3, #ls_zca_str_to_char-string)|
WHEN p_key2 IS NOT INITIAL AND p_string IS NOT INITIAL THEN
|(#ls_zca_str_to_char-key1, #ls_zca_str_to_char-key2, #ls_zca_str_to_char-string)|
WHEN p_key2 IS NOT INITIAL AND p_string IS NOT INITIAL THEN
|(#ls_zca_str_to_char-key1, #ls_zca_str_to_char-string)| ).
SELECT (lv_field_tab) FROM (p_table) INTO (#lv_results).
APPEND ls_zca_str_to_char TO lt_zca_str_to_char.
ENDSELECT.
This will activate, and when I get to my Open SQL query (from a Z table, only filling out the first two of three possible key fields), the values are the following:
lv_field_tab = GUID, TEXT_ID, TEXT_DATA (Good)
p_table = ZCR_TRANS_TEXT (Good)
lv_results = (#ls_zca_str_to_char-key1, #ls_zca_str_to_char-key2, #ls_zca_str_to_char-string) (Good, 3 = 3!)
But, since I'm assuming the compiler is seeing (#lv_results) as one single variable, the program dumps with the following error:
The current ABAP program attempted to execute an Open SQL statement
containing a dynamic entry. The parser returned the following error:
"The field list and the INTO list must have the same number of
elements."
Is it possible for me to use the new Open SQL syntax to accomplish my dynamic INTO clause in harmony with my dynamic field list?
The brackets on the INTO do not do what you expect, from the ABAP help:
... INTO (#dobj1, #dobj2, ... )
Effect
If the results set consists of multiple columns or aggregate expressions specified explicitly in the SELECT list, a list of elementary data objects dobj1, dobj2, ... (in parentheses and separated by commas) can be specified after INTO.
In your case you only have one value in there so you can only select one column and the data will be passed in the variable LV_RESULT. Not what you are looking for. Since you want to fill the fields of an existing structure the INTO CORRESPONDING FIELDS OF construct will work here. And you can use TABLE to make your command more efficient as well. This leads to:
SELECT (lv_field_tab) FROM (p_table)
INTO CORRESPONDING FIELDS OF TABLE #lt_zca_str_to_char.
As said previously, you may use INTO CORRESPONDING FIELDS OF ..., but it's not mandatory, it's only for simplifying the code.
So, instead of using CORRESPONDING FIELDS, you may create a structure dynamically (RTTC) with its components corresponding to the columns in LV_FIELD_TAB, and you may then use:
SELECT (lv_field_tab) FROM (p_table) INTO #<structure> ... ENDSELECT.
But of course, as explained by Gert Beukema, you should better do only one SELECT, by creating an internal table dynamically with the same logic as for the structure above, and you may then use:
SELECT (lv_field_tab) FROM (p_table) INTO TABLE #<internal table> ...
Refer to the many examples in the web how to create data objects dynamically with RTTC.
Do not use a fields list for your INTO clause.
Try with
INTO CORRESPONDING FIELDS OF TABLE
must be a FIELD-SYMBOL type any table, and the rest of the logic is up to you (to put the proper information from your generic and almost-empty to your specific destination one).
I've just started using microsoft access so I don't really know how to solve this. I would like to use an update query to add a value from a form to a value on a table.
I originally used the SUM expression which gave me an error saying it was an aggregate function.
I also tried to add the two values together (e.g [field1] + [field2]) which as a result gave me a value with both numbers together instead of adding them together.
The following is the SQL I'm using:
UPDATE Votes
SET Votes.NumVotes = [Votes]![NumVotes]+[Forms]![frmVote]![txtnumvotes]
WHERE (((Votes.ActID) = [Forms]![frmVote]![combacts])
AND ((Votes.RoundNum) = [Forms]![frmVote]![combrndnum]))
I want to add a value [txtnumvotes] a form to a field [NumVotes] from the table [Votes].
Could someone please help me?
You can specify the expected data type with parameters:
PARAMETERS
[Forms]![frmVote]![txtnumvotes] Short,
[Forms]![frmVote]![combacts] Long,
[Forms]![frmVote]![combrndnum] Long;
UPDATE
Votes
SET
Votes.NumVotes = [Votes]![NumVotes]+[Forms]![frmVote]![txtnumvotes]
WHERE
(((Votes.ActID) = [Forms]![frmVote]![combacts])
AND
((Votes.RoundNum) = [Forms]![frmVote]![combrndnum]))
Without the specification, Access has to guess, and that sometimes fails.