How can I show “Intra-package call graph” using godoc as described in Intra-package call graph ?
I use this command
$ GO111MODULE=off godoc -http=:6060 -analysis=type,pointer
to start a local server and everything is fine. I just cannot find where the “Intra-package call graph” is.
Any help is appreciated!
Solved.
It just takes too long to do "Pointer analysis", which is approximately 4.5 minutes on my laptop. The "Intra-package call graph" for hole package and every function appeared until "2021/03/16 15:04:28 Pointer analysis running..." had disappeared from my terminal.
And "-analysis=pointer" is just efficient.
Related
I'm trying to get a BG95 to activate on hologram.
Here are my commands:
AT+QCFG="band",F,180A,180A OK
AT+QCFG="iotopmode",2 OK
AT+QCFG="nwscanseq",020301 OK
AT+QCFG="nwscanmode",0 OK
AT+QCFG="snrscan",0 OK
AT+QICSGP=1,1,"hologram","","",1 OK
AT+QIACT=1 ERROR
At first I thought it was antenna/signal related so I ran AT+CSQ and got this:
+csq: 11,99
This tells me I have a good signal I believe.
Next I tried AT+QNWINFO and get this:
+QNWINFO: "eMTC","311480","LTE BAND 13",5230
In my mind this is saying it's connected to a network.
After trying that I tried to activate again and got this:
AT+QIACT=1
ERROR
The weird thing is it activated just fine about a week ago with pure AT commands. I did try and use an Arduino library with it (WisLTEBG96TCPIP) which may have changed a setting in it. I've done a factory reset but the it still woln't activate.
Another strange thing is the hologram dashboard. Every once and a while it will show the SIM as connected, even though I can't activate.
I have tried with 2 different SIM cards any get the same activation error.
Any help would be greatly appreciated!
Verizon has cut off all non ODI products. If your hardware has not been Verizon ODI 'certified' it will no longer be allow to be connected to their network, I have 5 new pet rocks thanks to them. The solution is to purchase new modems from vendors that have been through the Verizon ODI program or switch carriers.
I had the same problem before, after a lot of maling with network operator I find out that there isn't a LTE-CAT-M1 (eMTC) network in my area, I tested in another area successfully
Also before setting AT+QCFG commands try AT+CFUN = 0
and after setting AT+QCFG commands try AT+CFUN = 1 .
before sending AT+QIACT, try 'AT+CEREG?' command several times and tell me what is the return of it
I run ASR experiment using Kaldi on SGE cluster consisting of two workstation with TITAN XP.
And randomly I meet the following problem:
ERROR (nnet3-train[5.2.62~4-a2342]:FinalizeActiveGpu():cu-device.cc:217) cudaError_t 1 : "__global__ function call is not configured" returned from 'cublasCreate(&handle_)'
I guess something is wrong with GPU driver or hardware.
Could you please offer some help?
And here is the complete log
I had similar issue in running darknet in one of the TX2
with reference to
https://blog.csdn.net/JIEJINQUANIL/article/details/103091537
enter the root by
sudo su
Then source the catkin_ws
Then launch the darkent.
Then can run.
Here is my result
Hope you can solve it by similar method
In normal applescript, the script is executed down the page, and so any code in loops for every 5 seconds will only run while the loop is running - there is no way to have a single function run every few second regardless of what the script is currently doing or where it is in the script (that I know of). In cocoa-applescript, however, is there a way to run a handler every 5 seconds, at all times, no matter what it is currently doing? Here is what it should be doing in my cocoa-applescript app:
on checkInternetStrength()
do shell script "/System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport -I | grep 'agrCtlRSSI:'" -- this being the script which returns the line containing the signal strength
set SignalStrength to result
set RSSIcount to (count of characters in SignalStrength)
set SignalStrength to ((characters 18 thru RSSIcount of SignalStrength) as string) as integer -- this to turn SignalStrength into just the number and not the whole output line
set SignalStrength to (100 + SignalStrength) as integer
set SignalBar's setIntValue_(SignalStrength) -- SignalBar being the Level Indicator described below
end checkInternetStrength
Summed up, it runs the airport command to check internet connection, turns this into a number from 1 to 100 and uses this on an NSLevelIndicator (100 maximum) to show current signal strength graphically. Now, there is no point having this run once or when you hit a button - that is an option, but it would be nice if it updated itself every, say, 5 seconds with the realtime value. So is there any way to have a process which runs every 5 seconds to do this, while still enabling full functionality of the rest of the script and interface - i.e. as a background process? Comment if you need more extracts from the script.
Example
In Unity-C# scripting, the 'void Update() {code}' will run the code within it every frame while doing everything else simultaneously, so a cocoa-applescript version of this might be an answer, if anyone knows.
I Dont believe this is possible but what I had a similar problem before, what i do, I have an external applescript applicaion that is hidden the repeats the commands, the only problem is, it wont send it back to the app, you'll have to make the external applescript app do it, like
display notification, etc..., in the applescript apps "Info.plist" you can add this:
<key>LSUIElement</key>
<string>1</string>
To make the app run invisibly, but sorry i dont think you can run a handler in the app its self
The pastebinit in my system(Fedora 21 32-bit) doesn't work as expected, such as:
echo asdasdas | pastebinit
The output is:
http://fpaste.org/
nothing else, it should be something like http://fpaste.org/spdvsd right?
I didn't use pastebinit very much, I remembered that a long time ago, the same thing happened to to me once, and I didn't figure it out at that time either. But after I re-installed my whole system because of some other reason, pastebinit worked again.
So can anyone here tell me the reason???
The API had some changes since, try updating the pastebinit package to v1.5 or build it from the source : pastebinit-1.5.tar.gz
I am currently making use of the suspendExecution and resumeExecutionWithResult of NSScript command in order to execute Apple Scripts asynchronously in my application. Provided below are the set of basic steps that I have taken to achieve the same.
1) Get the script command and store it in an IVAR. Now suspend the execution of the command using [NSScriptCommand suspendExecution]
2) Execute any transaction calls which will return the results asynchronously.
3) In the completionHandler of the Async call resume the execution with the fetched results i.e
[NSScriptCommand resumeExecutionWithResult:result]
The steps mentioned above work perfectly fine when I execute scripts from the Script Editor. but using an NSAppleScript object (when executing the scripts from say a scripts menu) to execute the same results in the following error
"AppleEvent timed out. Error Number: -1712"
The timeout error occurs almost instantaneously. Any pointers as to how this issue can be fixed would be greatly appreciated.
I found that using NSUserAppleScriptTask(available with the 10.8 SDK) instead of NSAppleScript to execute the Apple Script resolves this issue.