I am trying to build my application in multiple configurations Debug/Release with AppVeyor. The project builds successfully if there aren't any conditional constructs in my proj files. Whereas if I have a conditional construct the build fails. If I run the build locally using msbuild project.csproj it works fine. I am not sure is there are any configurations that needs to be in place or I am doing something wrong. Below are the code snippets.
For brevity just including the bits necessary
Appveyor.yml
configuration:
- Release
- Debug
build:
parallel: true
project: project.proj
verbosity: minimal
project.proj
<Target Name="NameTest1">
<MSBuild Projects="Project1.csproj" Properties="Configuration=$(Configuration);" ContinueOnError="false"/>
<MSBuild Projects="Project2.csproj" Properties="Configuration=$(Configuration);" ContinueOnError="false"/>
<MSBuild Projects="Project3.csproj" Properties="Configuration=$(Configuration);" ContinueOnError="false" Condition="'$(Configuration)'=='Release'"/> -->AppVeyor build Fails Here
</Target>
Another proj file being used by Project.proj
<Choose>
<when Condition="'$(Configuration)'=='Release'">
<ItemGroup>
<BinFiles Include="bin\$(Configuration)\*.exe"/>
<BinFiles Include="bin\$(Configuration)\*.dll"/>
<BinFiles Include="bin\$(Configuration)\*.dll.config"/>
<BinFiles Include="bin\$(Configuration)\*.exe.config"/>
</ItemGroup>
</when>
</Choose>
Appveyor fails at both Condition as well as Choose/When constructs. Any help on this would be appreciated. Thanks !
Related
I am trying to have MSBuild generate a text file with a version number representing when the build was created.
Right now in my MSBuild task I have the following:
<Target Name="WriteBuildDate" AfterTargets="Compile">
<WriteLinesToFile File="buildversion.txt" Lines="$([System.DateTime]::UtcNow.Year).$([System.DateTime]::UtcNow.Month).$([System.DateTime]::UtcNow.Day).$([System.Math]::Floor($([System.DateTime]::UtcNow.Subtract($([System.DateTime]::UtcNow.Date)).TotalSeconds)))" Overwrite="true" Encoding="Unicode" />
</Target>
This works, except that it executes even if the all assemblies were not rebuilt. This means if I use the VS publish capability for multiple servers each of them will have slightly different version numbers, even though the builds are all the same.
Is there any way (without custom msbuild tasks) to have this target only execute if at least one assembly was rebuilt?
Thanks to #stijn's comment/link, I was able to get this working via:
<PropertyGroup>
<RunPostBuildEvent>OnOutputUpdated</RunPostBuildEvent>
</PropertyGroup>
<Target Name="WriteBuildDate" AfterTargets="CoreBuild" Condition="'$(_AssemblyTimestampBeforeCompile)'!='$(_AssemblyTimestampAfterCompile)'">
<WriteLinesToFile File="buildversion.txt" Lines="$([System.DateTime]::UtcNow.Year).$([System.DateTime]::UtcNow.Month).$([System.DateTime]::UtcNow.Day).$([System.Math]::Floor($([System.DateTime]::UtcNow.Subtract($([System.DateTime]::UtcNow.Date)).TotalSeconds)))" Overwrite="true" Encoding="Unicode" />
</Target>
I have a solution that contains a console application with a .csproj file like the this:
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<OutputType>Exe</OutputType>
<TargetFramework>netcoreapp1.1</TargetFramework>
</PropertyGroup>
</Project>
I also have a library project that uses the console application to generate a heap of C# code that get compiled into the library, the library .csproj file looks like this.
<Project Sdk="Microsoft.NET.Sdk" InitialTargets="RunGenerator">
<PropertyGroup>
<TargetFramework>netstandard1.4</TargetFramework>
</PropertyGroup>
<ItemGroup>
<ProjectReference Include="../generator/generator.csproj">
<ReferenceOutputAssembly>false</ReferenceOutputAssembly>
</ProjectReference>
</ItemGroup>
<Target Name="RunGenerator">
<Exec Command="dotnet run -p "../generator/generator.csproj" input output" />
</Target>
</Project>
This fails because the dependency analysis says that a netstandard1.4 assembly cannot reference a netcoreapp1.1 assembly. That is correct except that I am not referencing the assembly.
I can work around that issue by building the generator project like this:
<Project Sdk="Microsoft.NET.Sdk" InitialTargets="RunGenerator">
<PropertyGroup>
<TargetFramework>netstandard1.4</TargetFramework>
</PropertyGroup>
<Target Name="RunGenerator">
<Exec Command="dotnet build "../generator/generator.csproj"" />
<Exec Command="dotnet run -p "../generator/generator.csproj" input output" />
</Target>
</Project>
The problem is that the generator project no longer takes part in the dependency analysis when these projects are built using the containing solution file and the explicit build of the generator project sometimes runs concurrently with another build of the same project initiated by the solution build and this results in errors because files are locked etc.
Is it possible to have a project dependency without checking the target framework?
Can anyone suggest a workaround?
Thanks.
Here are some MSBuild tips. You might need to combine a few of these ideas.
You can use your solution file to add an explicit project dependency. See https://learn.microsoft.com/en-us/visualstudio/ide/how-to-create-and-remove-project-dependencies (This question was originally asked here: Visual Studio 2010: How to enforce build order of projects in a solution?). Unfortunately, this is really hard to do if you don't have VS. The format is .sln files is kinda a nightmare.
To avoid the concurrent build issue, use the MSBuild task instead of the Exec task. See https://learn.microsoft.com/en-us/visualstudio/msbuild/msbuild-task
<Target Name="CompileAnotherProject">
<MSBuild Projects="../generator/generator.csproj" Targets="Build" />
</Target>
dotnet-run invokes "dotnet build" automatically. This is actually problematic in concurrent builds. You can instead add a target to your generator.csproj that runs the app after it has been built. "dotnet filepath.dll" runs the compiled app without building it.
<Target Name="RunCodeGen" AfterTargets="Build">
<Exec Command="dotnet $(AssemblyName).dll input output"
WorkingDirectory="$(OutDir)" />
</Target>
My team has a large solution (~500 csproj's). We use VS2012, and build using TFS Build, which uses MSBuild 4. Currently we build serially, but we want to build in parallel (using msbuild /maxcpucount:4). However, when I try it on my 4-proc machine, I get a weird failure:
11:2>CSC : fatal error CS0042: Unexpected error creating debug information file 'C:\Common\obj\Debug\Common.PDB' -- 'C:\Common\obj\Debug\Common.pdb: The process cannot access the file because it is being used by another process. [C:\Common\Common.csproj]
Looking at the log, 2 msbuild nodes were trying to build that same csproj, and thus colliding on writing some output:
10>Project "C:\Utils\Utils.csproj" (10) is building "C:\Common\Common.csproj" (11) on node 4 (default targets).
46:2>Project "C:\Objects\Objects.csproj" (46:2) is building "C:\Common\Common.csproj" (11:2) on node 1 (default targets).
Why would MSBuild try to build the same project twice?
Cause: Someone was calling <MSBuild Projects="Common.csproj" Properties="..." />. Then, MSBuild thinks that it should build Common.csproj again with those different properties, and it happened to occur at the same time with the regular compilation of Common.csproj.
Fix: Call <MSBuild ... /> without those unneeded properties.
Test:
Common.targets
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Build">
<Message Importance="high" Text="Build in $(MSBuildThisFile)" />
</Target>
<Target Name="After" DependsOnTargets="Build">
<Message Importance="high" Text="After in $(MSBuildThisFile)" />
</Target>
</Project>
Other.targets
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="Build">
<Message Importance="high" Text="Build in $(MSBuildThisFile)" />
<MSBuild Projects="common.targets" Targets="Build" /> <!-- regular builds -->
<MSBuild Projects="common.targets" <!-- custom invocation with properties -->
Targets="After"
Properties="myprop=myvalue"
/>
</Target>
</Project>
Run:
> msbuild other.targets /clp:verbosity=minimal
Build in other.targets
Build in common.targets
Build in common.targets <<<< Common.targets Build is invoked again
After in common.targets
And indeed, removing Properties="myprop=myvalue" solves the issue.
I found someone had added two project references (from the same project) and that apparently caused msbuild to build twice also.. something to watch out for
We are trying to write a msbuild script that will build the solution and copy over all the compiled binaries and dependencies over to a specific output folder. While the build script that we have does build and copy over the binaries to a common folder, but we are not getting the dependencies copied.
This probably has to do with the way we have used the msbuild task to build the solution and we are accepting the targetoutputs of the task into an itemgroup and iterating over the item group to copy all the compiled dlls and exes over to a common folder. But this is not including the dependency dlls which gets placed into the individual bin folder of each project.
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<ParentSolutionFile />
</PropertyGroup>
<ItemGroup>
<Assemblies Include="*.dll, *.exe" />
</ItemGroup>
<Target Name="BuildAll">
<CombinePath BasePath="$(MSBuildProjectDirectory)" Paths="Source\Solutions\xxx.sln">
<Output TaskParameter="CombinedPaths" PropertyName="ParentSolutionFile" />
</CombinePath>
<Message Text="$(ParentSolutionFile)" />
<MSBuild Projects="$(ParentSolutionFile)">
<Output TaskParameter="TargetOutputs" ItemName="Assemblies" />
</MSBuild>
<Message Text="%(Assemblies.Identity)" />
<Copy SourceFiles="%(Assemblies.Identity)" DestinationFolder="$(MSBuildProjectDirectory)\Binary" OverwriteReadOnlyFiles="True" SkipUnchangedFiles="True" />
</Target>
What will be the preferred way to copy over all the binaries along with the necessary dependencies to a common output folder?
Does not overriding OutputPath do the trick alone?
<MSBuild Projects="$(ParentSolutionFile)" Properties="OutputPath=$(MSBuildProjectDirectory)\Binary">
<Output TaskParameter="TargetOutputs" ItemName="Assemblies" />
</MSBuild>
And leave out the copy task alltogether?
The build process will place the final result in the directory represented by OutputPath - at least if you are building c# projects. For C/C++ the internal structure and variable names are completely different.
Thus, in theory, you could pass the OutputPath in the MsBuild-task that builds the solution.
<MsBuild Projects="$(ParentSolutionFile)"
Properties="OutputPath=$(MSBuildProjectDirectory)\Binary"/>
However, the csproj-files will overwrite that value unconditionally with the following code:
<PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
<DebugSymbols>true</DebugSymbols>
<OutputPath>bin\Debug\</OutputPath>
I have solved this by injecting my own build system in each and every csproj-file.
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
<Import Project="..\..\..\build\buildsystem.targets" />
The path is relative to the csproj-file. An absolute path is fine too, or a variable. The trick is to make it work on all dev machines as well as the build agents.
Now, in buildsystem.targets, simply redefine OutputPath as much as you like. Again, the trick is to ensure you get the same - or at least a well defined - location regardless of who builds it (dev, build agent) and regardless how the build was initiated (VS, command line).
A simple way of handling the differences is to import conditionally.
<Import Project="..\..\..\build\buildsystem.targets"
Condition="'$(BuildingInsideVisualStudio)'!='true'"/>
That will give you no changes if initiating the build from VS and whatever changes you code for if you build from command line.
--Jesper
I have an MSBuild script which compiles my existing solution but I'd like to change some properties of one of the projects within the solution at compile-time, including but not limited to AssemblyProduct and AssemblyTitle.
Here's a snippet of my build script:
<Target Name="Compile" >
<MSBuild Projects="..\MySolution.sln"
Properties="Configuration=MyReleaseConfig;Platform=x86" />
</Target>
I've got one main executable and several DLLs that are compiled. I am aware of the MSBuild Extension Pack and I suspect it might help me to get to where I need to be, although I'm not sure how to proceed.
Can I selectively change AssemblyInfo properties at build time?
You're on the right track with the MSBuild Extension Pack.
I find the easiest way to conditionally generate the assembly details at build time is to add an "AssemblyVersion" target directly to my .csproj file(s) that require an updated AssemblyInfo file. You can add the target directly to each csproj file that requires an updated AssemblyInfo file, or as I prefer to do it, create a custom targets file with the AssemblyVersion target and have each csproj file include your custom targets file.
Either way you likely want to use the MSBuild Extension Pack or the MSBuild Community Tasks to use their respective AssemblyInfo task.
Here's some code from our build scripts:
<!-- Import the AssemblyInfo task -->
<Import Project="$(MSBuildCommunityTasksPath)\MSBuild.Community.Tasks.Targets"/>
<!-- Overriding the Microsoft.CSharp.targets target dependency chain -->
<!-- Call our custom AssemblyVersion target before build, even from VS -->
<PropertyGroup>
<BuildDependsOn>
AssemblyVersion;
$(BuildDependsOn)
</BuildDependsOn>
</PropertyGroup>
<ItemGroup>
<AssemblyVersionFiles Include="$(MSBuildProjectDirectory)\Properties\AssemblyInfo.cs"/>
</ItemGroup>
<Target Name="AssemblyVersion"
Inputs="#(AssemblyVersionFiles)"
Outputs="UpdatedAssemblyVersionFiles">
<Attrib Files="%(AssemblyVersionFiles.FullPath)"
Normal="true"/>
<AssemblyInfo
CodeLanguage="CS"
OutputFile="%(AssemblyVersionFiles.FullPath)"
AssemblyCompany="$(CompanyName)"
AssemblyCopyright="Copyright $(CompanyName), All rights reserved."
AssemblyVersion="$(Version)"
AssemblyFileVersion="$(Version)">
<Output TaskParameter="OutputFile"
ItemName="UpdatedAssemblyVersionFiles"/>
</AssemblyInfo>
</Target>
Sneal's answer was very helpful, but I'd like to show what I actually ended up doing. Instead of editing csproj files (there are several) I instead added tasks to my build script. Here's a snippet:
<PropertyGroup>
<ProductName>MyApp</ProductName>
<CompanyName>MyCompany</CompanyName>
<Major>1</Major>
<Minor>0</Minor>
<Build>0</Build>
<Revision>0</Revision>
</PropertyGroup>
<ItemGroup>
<AssemblyVersionFiles Include="..\MyMainProject\Properties\AssemblyInfo.cs"/>
</ItemGroup>
<Target Name="AssemblyVersionMAIN" Inputs="#(AssemblyVersionFiles)" Outputs="UpdatedAssemblyVersionFiles">
<Attrib Files="%(AssemblyVersionFiles.FullPath)" Normal="true"/>
<AssemblyInfo
CodeLanguage="CS"
OutputFile="%(AssemblyVersionFiles.FullPath)"
AssemblyProduct="$(ProductName)"
AssemblyTitle="$(ProductName)"
AssemblyCompany="$(CompanyName)"
AssemblyCopyright="© $(CompanyName) 2010"
AssemblyVersion="$(Major).$(Minor).$(Build).$(Revision)"
AssemblyFileVersion="$(Major).$(Minor).$(Build).$(Revision)"
AssemblyInformationalVersion="$(Major).$(Minor).$(Build).$(Revision)">
<Output TaskParameter="OutputFile" ItemName="UpdatedAssemblyVersionFiles"/>
</AssemblyInfo>
</Target>
<Target Name="Compile" DependsOnTargets="AssemblyVersionMAIN">
<MSBuild Projects="..\MySolution.sln"
Properties="Configuration=Release;Platform=x86;Optimize=true" />
</Target>
Then, I can override my variables from the command line, or a batch script, like so:
set MAJ=1
set MIN=2
set BLD=3
set REV=4
msbuild buildScript.xml /t:Compile /p:Major=%MAJ% /p:Minor=%MIN% /p:Build=%BLD% /p:Revision=%REV%
<Target Name="SetVersion">
<ItemGroup>
<AssemblyInfoFiles Include="$(TargetDir)\**\AssemblyInfo.cs"/>
</ItemGroup>
<Message Text="change the Version number for:"/>
<Message Text="%(AssemblyInfoFiles.FullPath)"/>
<MSbuild.ExtensionPack.Framework.AssemblyInfo
AssemblyInfoFiles="#(AssemblyInfoFiles)"
AssemblyTitle="newTitle"
AssemblyMajorVersion="2"
AssemblyMinorVersion="0"/>
</Target>