I'm using wslv2 on Windows 10 Pro running on the dev channel. I've made sure it's fully up to date, then completely uninstalled wsl and ubuntu, then reinstalled them.
Despite this, I don't have a working mount option :(
wings#machine:~$ wsl --mount
Unknown command: --mount
If I understand correctly, you are trying to do this from the wsl terminal. But this must be done through powershell.
This is due to the --mount option being not yet released.
The documentation on Microsoft doesn't highlight it very much but you have to use early windows 11 preview to be able to use the mount option.
See here: https://learn.microsoft.com/en-us/windows/wsl/wsl2-mount-disk#prerequisites
From what I understand there, the actual release is scheduled for this month (Sept. 21) in Win 10.
Related
I have installed Ubuntu 18.04 for windows subsystem for linux on windows 10, after enabling WSL in Powershell (instructions here: https://learn.microsoft.com/en-us/windows/wsl/install-win10).
I've done this before on a desktop but now I'm doing it on a laptop. I had no issues with the previous installation but this time around ubuntu will not launch. I get the ubuntu console popping up briefly before disappearing.
Also trying to run bash.exe from the command line fails silently (doesn't hang, just exits with no message), which may be related.
I'm struggling to figure this out as I have no idea where any error messages might be logged. Does anyone know how I can investigate further why this is happening?
Setup is a windows 10 Pro, os build 17134.376, everything up to date.
I'm struggling to figure this out as I have no idea where any error messages might be logged. Does anyone know how I can investigate further why this is happening?
Check with wslconfig.exe /l all registered distros, try to deregister the one you have problem with ( e.g. wslconfig.exe /u Ubuntu [^1]) and run the ubuntu.exe in your distro once again. Just a wild guess, it might be also a problem, if you have more than one copy of the linux distribution in you home directory.
[^1]: Warning: deregistering will delete all the associated files!
I stuck in install weblogic on my vm solaris. i try that
java -d64 -jar fmw_12.2.1.3.0_wls.jar
and i got an error
Checking monitor: must be configured to display at least 256 colors. DISPLAY environment variable not set. Failed <<<<
Any solution for these error?
This happens if you want to do an graphical install of the system without having a X11 running. The error message is quite normal for such an situation.
You could:
Not running the installer in the graphical mode by doing a silent install (please refer to https://docs.oracle.com/cd/E24329_01/doc.1211/e24492/silent.htm#WLSIG131 for information)
Install the nescessary package to have an X11 and stuff running in your VM with pkg install solaris-desktop. Then execute the java command again from the GUI . This obviously only works if you can get a the graphical output of the VM for example via VNC or other tools.
You could set the DISPLAY variable to an installed X11 implementation. For example i use Xquartz on my Apple notebook. Then configure DISPLAY and XAUTHORITY correctly. Or you could simply log into the Solaris system with ssh -X . I prefer the second one, as it does everything automatically.
I want to automate the Ubuntu installation (a fully unattended installation without questions). I also want to run a script right after the installation is finished.
What I did is that I managed to have a fully unattended Ubuntu installation. I am doing this by providing a pre-seed file and using boot parameters to preseed the questions that are asked before the preseed file is loaded. The installation went okay but the problem lies with running the script right after the installation completion. I am using Ubuntu 14.04 LTS desktop version thus I am not using the late command as I have read that it won't be noticed by the installer. Instead, I am using the Ubiquity/success_command. I have the following code at the end of my pre-seed file.
ubiquity ubiquity/success_command string \
mkdir /target/dev-master/; \
cp -r /cdrom/dev-master/* /target/dev-master/; \
chroot /target bash /dev-master/SCRIPT;
The problem is nothing happens. I think the command went unnoticed as well.
I am not sure if I am approaching the problem correctly.
What am I doing wrong ?
Is there any other alternatives that might provide the desired result ? Any help would be appreciated and thanks.
I have installed NetBSD 6.1.5 with full installation setting. However, when I run startx it says no screens could be found. So i tried "X -configure" and then "X -config ~/xconfig.conf.new" and I was brought to a very generic screen with a black x crosshair, but I was unable to exit this using the suggested ctrl+alt+backspace, so I had to force power off and check if my keyboard was recognized in the conf file generated, which it was. I have installed xdm, xterm, Xorg, and other X programs.
I am not familiar with setting up desktop environments from scratch. I am a newb who is used to Ubuntu esque installers doing that stuff for me.
Would someone be able to walk me though the installation or point me to a link which explains a step by step process?
What happens if you rename your xorg.conf.new to /etc/X11/xorg.conf? Does startx or xdm work then?
Are you running this inside a VirtualBox or other emulator?
I have NetBSD on a Thinkpad T420 which I occasionally boot into Windows, and I've setup VirtualBox to be able to run the same NetBSD install when I'm in Windows. The key difference in the xorg.conf file is in the Device section:
Section "Device"
Driver "vesa"
EndSection
Also I've found the free version of http://mobaxterm.mobatek.net/ very handy - I use it to ssh into the virtual NetBSD box and then run X apps and have them display on the Windows desktop.
Final note - you might want to look out for the NetBSD-7 RC1 which should be out 'Real Soon Now', as there are some very handy improvements, including better support for most modern display hardware :)
I found that running startx from any directory with a .xinitrc file gives strange behavior in amd64 6.1.5 and 6.1.4. Delete (or rename) any .xinitrc files and try
xinit /path/to/windowmanager
Please read Chapter 9 of NetBSD Guide:
http://www.netbsd.org/docs/guide/en/chap-x.html
Section 9.9 discusses installing various Desktop Managers/Environments.
It turns out that I could run "X -config xorg.conf.new" as root on host and then ssh using putty to manually launch windows.
I have installed (and re-installed) Octave 3 times on Windows 8, and I still can't get it right. The first and most obvious problem is that the prompt is missing; the screen only shows the flashing underscore that follows the prompt. This is not a major problem since the system properly responds to commands.
The major problem is that Octave crashes whenever it encounters a syntax error, instead of politely giving a diagnostic. This makes for extremely tedious software development.
Is there a way around this problem, or do we just have to wait for one side or the other to come up with an accommodation?
I encountered the same problem. I solved it by this:
create a shortcut to octave.exe, then right click->property-> change the "target" to something like:
C:\Program Files\Octave\Octave3.6.*_gcc*.*.*\bin\octave.exe -i --line-editing
Then it won't exit if u have syntax errors.
I don't understand the meaning of the parameters yet.
reference:
http://exciton.eo.yzu.edu.tw/~lab/?p=1121
Type octave --help can check the meaning of parameters.
-i also --interactvie, to force Octave interactive behavior.
Maybe Octave run at non-interactive mode at default, that means prompt should not be shown and it should terminate immediately when encountered error when reading a file.
I don't know if this will solve your problem, or if this is too bloated of a solution for you, but I use Octave on Windows 7 through Cygwin without any problems.
If you can't get Octave to run on Windows 8, you may consider running Octave through Linux via computer virtualization technology (virtual computer). Two, off the top of my head that you could use are VirtualBox by Oracle or VMWare Player
Once you have it installed, you can go to any number of sites that have pre-built Linux images that you can download and then run inside of Windows 8.X. Do a Google search of for 'Virtualbox images' or as 'VMWare appliances'. You can then download and use that to run the lastest version of Octave. I hope that helps.
Cheers,