I am using VBA in Ms Access environment, to handle long string (memo field storing HTML originally).
After positioning by Instr(), I put the position into Mid(vStr,vStartPos,vEndPos-vStartPos+1) to extract the string, but the output doesn't match. I have already carefully checked this in immediate windows, as well as NotePad++. What I can say is Instr() and NotePad++ have given the same counting result, while Mid() is different. Mid()'s result are former than Instr()'s in some cases, and latter in other cases. I don't know the reason, and can just believe Mid() use different mechanism or have defeative (surprised!) in handling long string mixed with single-byte and bi-byte chars (but this is common in the world, and meet no problem before), and possibly some special characters.
I believe I need to custom-make a Mid() function. Any idea how to do it effectively and efficiently?
Thanks all for your reply. After I created a custom Mid() by RegEx and find that the problem has no change, I have found out the silly mistake I made. The Instr() and Mid() have no problem, but the string has been carelessly modified between them. So this case should be closed now.
This should be an easy one for folks. Google's got nothing except content farms linking to one blurb, and that's written in broken English. So let's get this cleared up here where it'll be entombed for all time.
What's the trailing ampersand on VB hexadecimal numbers for? I've read it forces conversion to an Int32 on the chance VB wants to try and store as an Int16. That makes sense to me. But the part I didn't get from the blurb was to always use the trailing ampersand for bitmasks, flags, enums, etc. Apparantly, it has something to do with overriding VB's fetish for using signed numbers for things internally, which can lead to weird results in comparisons.
So to get easy points, what are the rules for VB.Net hexadecimal numbers, with and without the trailing ampersand? Please include the specific usage in the case of bitmasks/flags and such, and how one would also use it to force signed vs. unsigned.
No C# please :)
Vb.net will regard "&h"-notation hex constants in the range from 0x80000000-0xFFFFFFFF as negative numbers unless the type is explicitly specified as UInt32, Int64, or UInt64. Such behavior might be understandable if the numbers were written with precisely eight digits following the "&", but for some reason I cannot fathom, vb.net will behave that way even if the numbers are written with leading zeroes. In present versions of VB, one may force the number to be evaluated correctly by using a suffix of "&" suffix (Int64), "L" (Int64), "UL" (UInt64), or "UI" (UInt32). In earlier versions of VB, the "problem range" was 0x8000-0xFFFF, and the only way to force numbers in that range to be evaluated correctly (as a 32-bit integer, which was then called a "Long") was a trailing ampersand.
Visual Basic has the concept of Type Characters. These can be used to modify variable declarations and literals, although I'd not recommend using them in variable declarations - most developers are more familiar these days with As. E.g. the following declarations are equivalent:
Dim X&
Dim X As Long
But personally, I find the second more readable. If I saw the first, I'd actually have to go visit the link above, or use Intellisense, to work out what the variable is (not good if looking at the code on paper).
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 9 years ago.
This question is to seek out good examples of Hungarian Notation, so we can bring together a collection of these.
Edit: I agree that Hungarian for types isn't that necessary, I'm hoping for more specific examples where it increases readability and maintainability, like Joel gives in his article (as per my answer).
The problem with asking for good examples of Hungarian Notation is that everyone's going to have their own idea of what a good example looks like. My personal opinion is that the best Hungarian Notation is no Hungarian Notation. The notation was originally meant to denote the intended usage of a variable rather than its type but it's usually used for type information, particularly for Form controls (e.g., txtFirstName for a text box for someone's first name.). This makes the code less maintainable, in terms of readability (e.g., "prepIn nounTerms prepOf nounReadability") and refactoring for when the type needs to be changed (there are "lParams" in the Win32 API that have changed type).
You should probably consider not using it at all. Examples:
strFirstName - this can just be firstName since it's obvious what it's for, the type isn't that important and should be obvious in this case. If not obvious, the IDE can help you with that.
txtFirstName - this can change to FirstNameTextBox or FirstName_TextBox. It reads better and you know it's a control and not just the text.
CAccount - C was used for class names in MFC but you really don't need it. Account is good enough. The uppercase name is the standard convention for types (and they only appear in specific places so they won't get confused with properties or methods)
ixArray (index to array) - ix is a bit obscure. Try arrayIndex.
usState (unsafe string for State) - looks like "U.S. State". Better go with state_UnsafeString or something. Maybe even wrap it in an UnsafeString class to at least make it type-safe.
The now classic article, as mentioned in other Hungarian posts, is the one from Joel's site:
http://www.joelonsoftware.com/articles/Wrong.html
p
(for pointer). Its pretty much the only prefix I use. I think it adds a lot to a variable (eg that its a pointer) and so should be treated a little more respectfully.
Hungarian for datatypes is somewhat passe now IDEs can tell you what the type is (in only a few seconds hovering over the variable name), so its not so important. But treating a pointer as if its data is not good, so you want to make sure it's obvious to the user what it is even if he makes assumptions he shouldn't when coding.
t
Tainted data. Prefix all data incoming from an untrusted source to make that variable as tainted. All tainted data should be cleansed before any real work is done on it.
It's pointless to use Hungarian to indicate types because the compiler already does it for you.
Where Hungarian is useful is to distinguish between logically different sorts of variables that have the same raw type. For example, if you are using ints to represent coordinates, you could prefix x coordinates with x, y coordinates with y and distances with d. So you would have code that looks like
dxHighlight = xStart - xEnd
yHighlight = yLocation + 3
yEnd = yStart + dyHeight
dyCode = dyField * 2
and so on. It's useful because you can spot errors at a glance: If you add a dy to a y, you always get a y. If you subtract two x's you always get a dx. If you multiply a dy by a scalar, you always get a dy. And so on. If you see a line like
yTop = dyText + xButton
you know at a glance that it is wrong because adding a dy and a x does not make sense. The compiler could not catch this for you because as far as it can tell, you are adding an int to an int which is fine.
Do not use language specific prefixes.
We use:
n: Number
p: Percentage 1=100% (for interest rates etc)
c: Currency
s: String
d: date
e: enumeration
o: object (Customer oCustomer=new Customer();)
...
We use the same system for all languages:
SQL
C
C#
Javascript
VB6
VB.net
...
It is a life saver.
Devil's Advocate: The best example of Hungarian notation is not to use it. :D
We do not gain any advantage to using Hungarian notation with modern IDEs because they know the type. It adds work when refactoring a type for a variable since the name would also have to be changed (and most of the time when you are dealing with a variable you know what type it is anyway).
You can also get into ordering issues with the notation. If you use p for pointer and a for address do you call your variable apStreet or paStreet? Readability is diminished when you don't have consistency, and you have to use up valuable mind space when you have to remember the order that you have to write the notation in.
I find hungarian notation can sometimes be useful in dynamic languages. I'm specifically thinking of Server Side Actionscript (essentially just javascript), but it could apply elsewhere. Since there's no real type information at all, hungarian notation can sometimes help make things a bit easier to understand.
Hungarian notation (camel casing, as I learned it) is invaluable when you're inheriting a software project.
Yes, you can 'hover' over a variable with your IDE and find out what class it is, but if you're paging through several thousand lines of code you don't want to have to stop for those few seconds - every.... single.... time....
Remember - you're not writing code for you or your team alone. You're also writing it for the person who has to pick up this code 2-5 years down the road and enhance it.
I was strongly against Hungarian notation until I really started reading about it and trying to understand it's original intent.
After reading Joels post "Wrong" and the article "Rediscovering Hungarian Notation" I really changed my mind. Done correct I belive it must be extremly powerful.
Wrong by Joel Spolsky
http://www.joelonsoftware.com/articles/Wrong.html
Rediscovering Hungarian Notation
http://codingthriller.blogspot.com/2007/11/rediscovering-hungarian-notation.html
I belive that most Naysayers have never tried it for real and do not truly understand it.
I would love to try it out in a real project.
I think the key thing to take away from Joel's article, linked above, and Hungarian Notation in general, is to use it when there's something non-obvious about the variable.
One example, from the article, is encoded vs non encoded strings, it's not that you should use hungarian 'us' for unsafe strings and 's' for safe strings, it's that you should have some identifier to indicate that a string is either safe or not. If it becomes standard, it becomes easy to see when the standard is being broken.
The only Hungarian that's really useful anymore is m_ for member variables. (I also use sm_ for static members, because that's the "other" scope that still exists.) With widescreen monitors and compilers that take eight-billion-character-long variable names, abbreviating type names just isn't worth it.
m
When using an ORM (such as hibernate) you tend to deal managed and unmanaged objects. Changing an managed object will be reflected in the database without calling an explicit save, while dealing with a managaged object requires an explicit save call. How you deal with the object will be different depending on which it is.
I find that the only helpful point is when declaring interface controls, txtUsername, txtPassword, ddlBirthMonth. It isn't perfect, but it helps on large forms/projects.
I don't use it for variables or other items, just controls.
In addition to using 'p' for pointer, I like the idea of using 'cb' and 'cch' to indicate whether a buffer size parameter (or variable) is a count of bytes or a character count (I've also seen - rarely - 'ce' used to indicate a count of elements). So instead of conveying type, the prefix conveys use or intent.
I admit, I don't use the prefix as consistently as I probably should, but I like the idea.
A very old question, but here's a couple of "Hungarian" prefixes I use regularly:
my
for local variables, to distinguish locality where the name might make sense in a global context. If you see myFoo, it's only used in this function, regardless of anything else we do with Foos anywhere else.
myStart = GetTime();
doComplicatedOperations();
print (GetTime() - myStart);
and
tmp
for temporary copies of values in loops or multi-step operations. If you see two tmpFoo variables more than a couple of lines from each other, they're almost certainly unrelated.
tmpX = X;
tmpY = Y;
X = someCalc(tmpX, tmpY);
Y = otherCalc(tmpX, tmpY);
and sometimes old and new in for similar reasons to tmp, usually in longer loops or functions.
Well, I use it only with window control variables. I use btn_, txt_, lbl_ etc to spot them. I also find it helpful to look up the control's name by typing its type (btn_ etc).
I only ever use p for a pointer, and that's it. And that's only if I'm in C++. In C# I don't use any hungarian notation.
e.g.
MyClass myClass;
MyClass* pMyClass;
That's all :)
Edit: Oh, I just realised that's a lie. I use "m_" for member variables too. e.g.
class
{
private:
bool m_myVar;
}
I agree that Hungarian notation is no longer particularly useful. I thought that its original intention was to indicate not datatype, but rather entity type. In a code section involving the names of customers, employees and the user, for example, you could name local string variables cusName, empName and usrName. That would help distinguish among similar-sounding variable names. The same prefixes for the entities would be used throughout the application. However, when OO is used, and you're dealing with objects, those prefixes are redundant in Customer.Name, Employee.Name and User.Name.
The name of the variable should describe what it is. Good variable naming makes Hungarian notation useless.
However, sometimes you'd use Hungarian notation in addition to good variable naming. m_numObjects has two "prefixes:" m_ and num. m_ indicates the scope: it's a data member tied to this. num indicates what the value is.
I don't feel hindered at all when I read "good" code, even if it does contain some "Hungarian." Right: I read code, I don't click it. (In fact, I hardly use my mouse ever when coding, or any voodoo programming-specific lookup features.)
I am slowed when I read things like m_ubScale (yes, I'm looking at you, Liran!), as I have to look at its usage (no comments!) to find out what it scales (if at all?) and it's datatype (which happens to be a fixed-point char). A better name would be m_scaleFactor or m_zoomFactor, with a comment as a fixed-point number, or even a typedef. (In fact, a typedef would be useful, as there are several other members of several classes which use the same fixed-point format. However, some don't, but are still labeled m_ubWhatever! Confusing, to say the least.)
I think Hungarian was meant to be an additive to the variable name, not a replacement for information. Also, many times Hungarian notation adds nothing at all to the variable's readability, wasting bytes and read time.
Just my 2ยข.
There's no such thing as a good example of hungarian notation. Just don't use it. Not even if you are using a weakly typed language. You'll live happier.
But if you really need some reason not to use it, this is my favourite one, extracted from this great link:
One followon trick in the Hungarian notation is "change the type of a variable but leave the variable name unchanged". This is almost invariably done in windows apps with the migration from Win16 :- WndProc(HWND hW, WORD wMsg, WORD wParam, LONG lParam) to Win32 WndProc(HWND hW, UINT wMsg, WPARAM wParam, LPARAM lParam) where the w values hint that they are words, but they really refer to longs. The real value of this approach comes clear with the Win64 migration, when the parameters will be 64 bits wide, but the old "w" and "l" prefixes will remain forever.
I find myself using 'w' meaning 'working', as a prefix instead of 'temp' or 'tmp', for local variables that are just there to jockey data around, like:
Public Function ArrayFromDJRange(rangename As Range, slots As Integer) As Variant
' this function copies a Disjoint Range of specified size into a Variant Array 7/8/09 ljr
Dim j As Integer
Dim wArray As Variant
Dim rCell As Range
wArray = rangename.Value ' to initialize the working Array
ReDim wArray(0, slots - 1) ' set to size of range
j = 0
For Each rCell In rangename
wArray(0, j) = rCell.Value
j = j + 1
Next rCell
ArrayFromDJRange = wArray
End Function
In this question, a user commented to never use the With block in VB. Why?
"Never" is a strong word.
I think it fine as long as you don't abuse it (like nesting)
IMHO - this is better:
With MyCommand.Parameters
.Count = 1
.Item(0).ParameterName = "#baz"
.Item(0).Value = fuz
End With
Than:
MyCommand.Parameters.Count = 1
MyCommand.Parameters.Item(0).ParameterName = "#baz"
MyCommand.Parameters.Item(0).Value = fuz
There is nothing wrong about the With keyword. It's true that it may reduce readibility when nested but the solution is simply don't use nested With.
There may be namespace problems in Delphi, which doesn't enforce a leading dot but that issue simply doesn't exist in VB.NET so the people that are posting rants about Delphi are losing their time in this question.
I think the real reason many people don't like the With keyword is that is not included in C* languages and many programmers automatically think that every feature not included in his/her favourite language is bad.
It's just not helpful compared to other options.
If you really miss it you can create a one or two character alias for your object instead. The alias only takes one line to setup, rather than two for the With block (With + End With lines).
The alias also gives you a quick mouse-over reference for the type of the variable. It provides a hook for the IDE to help you jump back to the top of the block if you want (though if the block is that large you have other problems). It can be passed as an argument to functions. And you can use it to reference an index property.
So we have an alternative that gives more function with less code.
Also see this question:
Why is the with() construct not included in C#, when it is really cool in VB.NET?
The with keyword is only sideswiped in a passing reference here in an hilarious article by the wonderful Verity Stob, but it's worth it for the vitriol: See the paragraph that starts
While we are on identifier confusion. The with keyword...
Worth reading the entire article!
The With keyword also provides another benefit - the object(s) in the With statement only need to be "qualified" once, which can improve performance. Check out the information on MSDN here:
http://msdn.microsoft.com/en-us/library/wc500chb(VS.80).aspx
So by all means, use it.