I'm trying to get the new (alpha) android datastore using protobuf support configured in gradle using Kotlin DSL (build.gradle.kts). The first attempts are not generating any java source classes from the xxx.proto (made-up name) file that is present. The protobuf plugin is generating the correct android tasks, but running them generates nothing, so obviously the default setup is not finding the directory my initial xxx.proto file is located in. The existing doc is thin on gradle setup, especially for Kotlin Gradle DSL (most all the gradle doc from google so far is for groovy), and my initial attempts at defining the location of the xxx.proto file are not working.
Does anyone have or has anyone seen working gradle config that specifies a custom source directory for .proto file(s) using Kotlin (build.gradle.kts)?
Got it working after some experimentation and floundering, but a hack is involved. If anyone can suggest improvements, it would be appreciated. In case this is useful here are the config snippets from the working setup. Module is kotlin 1.4.21-2 multiplatform with android, ios64, and jvm targets, with more planned. It has the KMP default setup for source directories:
The .proto file is in src/androidMain/proto subdirectory.
build.gradle.kts snippets are below. All the changes are in the android block, except for the plugin of course:
plugins {
id("com.android.library")
kotlin("multiplatform")
id("kotlinx-atomicfu")
kotlin("plugin.serialization") version Versions.kotlinVersion
id("com.google.protobuf") version "0.8.14"
}
...
kotlin {
... no changes here
}
...
android {
...
sourceSets {
...
getByName("main") {
manifest.srcFile("src/androidMain/AndroidManifest.xml")
java.srcDirs("src/androidMain/kotlin")
assets.srcDirs(File("src/commonMain/resources"))
withGroovyBuilder {
"proto" {
"srcDir" ("src/androidMain/proto")
}
}
}
}
protobuf {
protoc {
artifact = "com.google.protobuf:protoc:4.0.0-rc-2"
}
plugins {
id("javalite") { artifact = "com.google.protobuf:protoc-gen-javalite:3.0.0" }
}
generateProtoTasks {
all().forEach { task ->
task.builtins {
id("java") {
option("lite")
}
}
task.plugins{
}
}
}
}
dependencies {
api("com.google.protobuf:protobuf-javalite:4.0.0-rc-2")
implementation("androidx.datastore:datastore:1.0.0-alpha05")
...
}
}
Note the withGroovyBuilder hack in the android sourceset - the srcdir definition is required for the plugin to find the .proto file I had, but in the current version of the plugin I couldn't figure out the correct Kotlin DSL syntax. Seems like the plugin needs to define a Kotlin extension function to make this work better.
It would be really nice if instead of requiring this stuff, that the datastore stuff could use the protobuf serialization available with kotlinx.serialization, and skip this java code generation step in gradle all together. But I'm sure that's down the road...
Anyway, thanks in advance if anyone has improvements etc...
Related
I'd like to write some of my code in Kotlin such that it can be used by both a JVM-based backend and a JS-based frontend.
To do the former (with the new IR complier), the classes have to be annotated with #JsExport. However, if I then try to use build the same file for a JVM, it breaks because that annotation is not recognized.
(These are separate projects with independent gradle configs but linking to the same Kotlin source tree. It's not a single "multiplatform" build.)
How can I export Kotlin/JS while still being compatible with Kotlin/Java?
To achieve that seperation and reusability, you need three gradle submodules that would depend on each other
The 'shared' module. The one with the common code
The 'backend' module. Purely kotlin/jvm module
The 'frontend' module. A purely kotlin/js module
Your gradle project structure should look something like this
project-root
- shared
- src/commonMain/kotlin
- build.gradle.kts
- backend
- src/main/kotlin
- build.gradle.kts
- frontend
- src/main/kotlin
- build.gradle.kts
- settings.gradle.kts
shared/build.gradle.kts should look like this
plugins {
kotlin("multiplatform")
}
and then backend/build.gradle.kts
plugins {
kotlin("jvm")
}
kotlin {
sourceSets {
val main by getting {
dependencies {
implementation(projects(":shared"))
}
}
}
}
and then backend/build.gradle.kts
plugins {
kotlin("js")
}
kotlin {
sourceSets {
val main by getting {
dependencies {
implementation(projects(":shared"))
}
}
}
}
and then settings.gradle.kts
include(":shared",":backend",":frontend")
With this sort of arrangement, You can write your shared code inside shared/src/commonMain/kotlin and environment specific code on their respective backend or frontend submodules
NOTE: The gradle configs above have been minimised to narrow down the explanation
#JsExport annotation works fine provided you are in a common source set.
I've done a quick example at: https://github.com/SimonCJacobs/JsExportExample
Run the Gradle tasks "jsRun" or "jvmRun" to see a #JsExport used in both platforms with the JS IR compiler.
I'm setting up a multi-module Gradle project based on Kotlin for the JVM. Since the root project does not contain any code, the Kotlin plugin should only be applied to subprojects.
build.gradle.kts (root project)
plugins {
kotlin("jvm") version "1.6.20" apply false
}
subprojects {
apply(plugin = "kotlin")
group = "com.example"
repositories {
mavenCentral()
}
dependencies {}
kotlin {
jvmToolchain {
check(this is JavaToolchainSpec)
languageVersion.set(JavaLanguageVersion.of(11))
}
}
}
Trying to set a toolchain causes the build to fail at the kotlin {...} extension:
Unresolved reference. None of the following candidates is applicable because of receiver type mismatch:
public fun DependencyHandler.kotlin(module: String, version: String? = ...): Any defined in org.gradle.kotlin.dsl
public fun PluginDependenciesSpec.kotlin(module: String): PluginDependencySpec defined in org.gradle.kotlin.dsl
It works fine if I copy the extension definition to each subproject build script, but why isn't it available in the main script?
This is one of my favourite things to fix in Gradle, and really shows off the flexibility that's possible (as well as demonstrating why Gradle can be complicated!)
First I'll give a bit of background info on the subprojects {} DSL, then I'll show how to fix your script, and finally I'll show the best way to share build logic with buildSrc convention plugins. (Even though it's last, I really recommend using buildSrc!)
Composition vs Inheritance
Using allprojects {} and subprojects {} is really common, I see it a lot. It's more similar to how Maven works, where all the configuration is defined in a 'parent' build file. However it's not recommended by Gradle.
[A], discouraged, way to share build logic between subproject is cross project configuration via the subprojects {} and allprojects {} DSL constructs.
Gradle Docs: Sharing Build Logic between Subprojects
(It's probably common because it's easy to understand - it makes Gradle work more like Maven, so each project inherits from one parent. But Gradle is designed for composition. Further reading: Composition over inheritance: Gradle vs Maven)
Quick fix: 'Unresolved reference'
The error you're seeing is basically because you haven't applied the Kotlin plugin.
plugins {
kotlin("jvm") version "1.6.20" apply false // <- Kotlin DSL won't be loaded
}
The kotlin { } configuration block is a very helpful extension function that is loaded when the Kotlin plugin is applied. Here's what it looks like:
/**
* Configures the [kotlin][org.jetbrains.kotlin.gradle.dsl.KotlinJvmProjectExtension] extension.
*/
fun org.gradle.api.Project.`kotlin`(configure: Action<org.jetbrains.kotlin.gradle.dsl.KotlinJvmProjectExtension>): Unit =
(this as org.gradle.api.plugins.ExtensionAware).extensions.configure("kotlin", configure)
// (note: this is generated code)
So if we don't have the extension function, we can just call configure directly, and thus configure the Kotlin extension.
subprojects {
// this is the traditional Gradle way of configuring extensions,
// and what the `kotlin { }` helper function will call.
configure<org.jetbrains.kotlin.gradle.dsl.KotlinJvmProjectExtension> {
jvmToolchain {
check(this is JavaToolchainSpec)
languageVersion.set(JavaLanguageVersion.of(11))
}
}
// without the Kotlin Gradle plugin, this helper function isn't available
// kotlin {
// jvmToolchain {
// check(this is JavaToolchainSpec)
// languageVersion.set(JavaLanguageVersion.of(11))
// }
// }
}
However, even though this works, using subprojects {} has problems. There's a better way...
buildSrc and Convention Plugins
buildSrc is, basically, a standalone Gradle project, the output of which we can use in the main project's build scripts. So we can write our own custom Gradle plugins, defining conventions, which we can selectively apply to any subproject in the 'main' build.
(This is the key difference between Gradle and Maven. In Gradle, a subproject can be configured by any number of plugins. In Maven, there's only one parent. Composition vs Inheritance!)
The Gradle docs have a full guide on setting up convention plugins, so only I'll briefly summarise the solution here.
1. Set up ./buildSrc
Create a directory named buildSrc in your project root.
Because buildSrc is a standalone project, create a ./buildSrc/build.gradle.kts and ./buildSrc/settings.gradle.kts files, like usual for a project.
In ./buildSrc/build.gradle.kts,
apply the kotlin-dsl plugin
add dependencies on Gradle plugins that you want to use anywhere in your project
// ./buildSrc/build.gradle.kts
plugins {
`kotlin-dsl` // this will create our Gradle convention plugins
// don't add the Kotlin JVM plugin
// kotlin("jvm") version embeddedKotlinVersion
// Why? It's a long story, but Gradle uses an embedded version of Kotlin,
// (which is provided by the `kotlin-dsl` plugin)
// which means importing an external version _might_ cause issues
// It's annoying but not important. The Kotlin plugin version below,
// in dependencies { }, will be used for building our 'main' project.
// https://github.com/gradle/gradle/issues/16345
}
val kotlinVersion = "1.6.20"
dependencies {
implementation("org.jetbrains.kotlin:kotlin-gradle-plugin:$kotlinVersion")
}
Note that I've used the Maven repository coordinates for the Kotlin Gradle plugin, not the plugin ID!
You can also add other dependencies into ./buildSrc/build.gradle.kts if you like. If you wanted to parse JSON in a build script, then add a dependency on a JSON parser, like kotlinx-serialization.
2. Create a convention plugin
Create your Kotlin JVM convention that you can apply to any Kotlin JVM subproject.
// ./buildSrc/src/main/kotlin/my/project/convention/kotlin-jvm.gradle.kts
package my.project.convention
plugins {
kotlin("jvm") // don't include a version - that's provided by ./buildSrc/build.gradle.kts
}
dependencies {
// you can define default dependencies, if desired
// testImplementation(kotlin("test"))
}
kotlin {
jvmToolchain {
check(this is JavaToolchainSpec)
languageVersion.set(JavaLanguageVersion.of(11))
}
}
}
Don't forget to add the package declaration! I've forgotten it a few times, and it causes errors that are hard to figure out.
3. Applying the convention plugin
Just like how Gradle plugins have IDs, so do our convention plugins. It's the package name + the bit before .gradle.kts. So in our case the ID is my.project.convention.kotlin-jvm
We can apply this like a regular Gradle plugin...
// ./subprojects/my-project/build.gradle.kts
plugins {
id("my.project.convention.kotlin-jvm")
}
(Convention plugins can also import other convention plugins, using id("..."))
Also, since we're using Kotlin, there's an even nicer way. You know how there are included Gradle plugins, like java and java-library. We can import our convention plugins the same way!
// ./subprojects/my-project/build.gradle.kts
plugins {
// id("my.project.convention.kotlin-jvm")
my.project.convention.`kotlin-jvm` // this works just like id("...") does
}
Note the backticks around the plugin ID - they're needed because of the hyphen.
(caveat: this non-id("...") way doesn't work inside buildSrc, only in the main project)
Result
Now the root ./build.gradle.kts can be kept really clean and tidy - it only needs to define the group and version of the project.
Because we're using convention plugins and not blanket subprojects, each subproject can be specialised and only import convention plugins that it needs, without repetition.
Site note: sharing repositories between buildSrc and the main project
Usually you want to share repositories between buildSrc and the main project. Because Gradle plugins are not specifically for projects, we can write a plugin for anything, including settings.gradle.kts!
What I do is create a file with all the repositories I want to use...
// ./buildSrc/repositories.settings.gradle.kts
#Suppress("UnstableApiUsage") // centralised repository definitions are incubating
dependencyResolutionManagement {
repositories {
mavenCentral()
jitpack()
gradlePluginPortal()
}
pluginManagement {
repositories {
jitpack()
gradlePluginPortal()
mavenCentral()
}
}
}
fun RepositoryHandler.jitpack() {
maven("https://jitpack.io")
}
(the name, repositories.settings.gradle.kts, isn't important - but naming it *.settings.gradle.kts should mean IntelliJ provides suggestions, however this is bugged at the moment.)
I can then import this as a plugin in the other settings.gradle.kts files, just like how you were applying the Kotlin JVM plugin to subprojects.
// ./buildSrc/settings.gradle.kts
apply(from = "./repositories.settings.gradle.kts")
// ./settings.gradle.kts
apply(from = "./buildSrc/repositories.settings.gradle.kts")
I have a gradle kotlin project, and I'm generating a kotlin file from a Rust project, so it ends up in a totally different place with no gradle project structure, etc.
How do I import this file into my gradle project?
It has its own package but it's a completely standalone file. This is my gradle file:
rootProject.name = "my_project"
include("app")
It's a desktop project, NOT android.
My build.gradle.kts:
plugins {
// Apply the org.jetbrains.kotlin.jvm Plugin to add support for Kotlin.
id("org.jetbrains.kotlin.jvm") version "1.5.31"
// Apply the application plugin to add support for building a CLI application in Java.
application
}
repositories {
// Use Maven Central for resolving dependencies.
mavenCentral()
}
dependencies {
// Align versions of all Kotlin components
implementation(platform("org.jetbrains.kotlin:kotlin-bom"))
// Use the Kotlin JDK 8 standard library.
implementation("org.jetbrains.kotlin:kotlin-stdlib-jdk8")
// This dependency is used by the application.
implementation("com.google.guava:guava:30.1.1-jre")
// Use the Kotlin test library.
testImplementation("org.jetbrains.kotlin:kotlin-test")
// Use the Kotlin JUnit integration.
testImplementation("org.jetbrains.kotlin:kotlin-test-junit")
}
application {
// Define the main class for the application.
mainClass.set("my_project.ffi.AppKt")
}
Adding the following code to your build.gradle.kts should do the trick (tested with Gradle 7.3.2):
// TODO: replace this dummy task with the task from your Rust project which
// generates the Kotlin source directory. Make sure that the generated
// directory (with the Kotlin file(s)) is the task output directory.
val rustTask by tasks.registering(Copy::class) {
// To test this, I had simply put a Kotlin file into this "somewhere"
// directory.
from("somewhere")
into(temporaryDir)
}
sourceSets {
main {
java {
srcDir(rustTask)
}
}
}
tasks {
compileKotlin {
dependsOn(rustTask)
}
}
So, we’re simply adding the generated sources as an additional source directory to the default SourceSet which is consumed by the compileKotlin task. In addition, we make sure that the sources are generated before compileKotlin runs.
I'd like to load my custom plugin from a local jar. The jar file compiles fine and when I check it, the manifest and the plugin class are there.
gradlePlugin {
plugins {
create("asdf") { // <-- I really call it "asdf" in the kts script
id = "asdf"
implementationClass = "pluginTest.TestPlugin"
version = "1.4.0"
}
}
}
The plugin doesn't do anything useful yet as it should be a proof-of-concept to make sure it actually works at all:
class TestPlugin : Plugin<Project> {
override fun apply(project: Project) {
println("Hallo TestPlugin!")
}
}
I then try to use it like this in another project:
buildscript {
repositories {
jcenter()
}
dependencies {
classpath(files("..\\..\\path\\to\\pluginTest.jar"))
}
}
plugins {
id("asdf") version "1.4.0"
}
but it keeps telling me that:
Plugin [id: 'asdf', version: '1.4.0'] was not found in any of the following sources:
What am I missing here? I use Gradle v6.5.
When you have the plugin jar on the classpath, you can't have a version number in the plugin application. I guess this is because you can't have multiple jars with different versions on the classpath in the first place, so specifying a version here doesn't make any sense (except perhaps to validate that you are using the correct one). This won't fix the problem, but it is a start.
To be honest, I don't know why your approach still won't work. The buildscript block is supposed to set up dependencies for that particular script, and that should make the plugin visible to it. It doesn't for some reason.
Perhaps this is a bug or perhaps this is just an undocumented limitation on the use of the plugin {} block. Maybe you could ask over at the Gradle forums or create an issue for it. However, there are workarounds that don't involve publishing to a (local) Maven repository, which I agree can be a bit annoying.
If you use "apply from" instead of "plugins {}", it works. For some reason, the former can see the buildscript classpath whereas the latter can't:
// build.gradle (Groovy DSL)
buildscript {
dependencies {
classpath(files("..\\..\\path\\to\\pluginTest.jar"))
}
}
apply from: "asdf"
Alternatively, move the buildscript plugin from the build.gradle file to the settings.gradle file. This makes is available to the entire build classpath and will make it work with the plugin block:
// settings.gradle (Groovy DSL):
buildscript {
dependencies {
classpath(files("..\\..\\path\\to\\pluginTest.jar"))
}
}
// build.gradle (Groovy DSL)
plugins {
id("asdf")
}
Lastly, just in case you haven't considered it already, you may be able to add the plugin as a composite build. This will create a source dependency to the plugin and has the advantage that transitive dependencies will be carried over (the ones you put in the plugin's own dependency block) and that it will be built automatically if not up-to-date. I use this approach for integration testing my plugins and also sometimes to apply them to my other real projects to test them in a bigger setting before publishing new versions.
Do that with either:
// settings.gradle (Groovy DSL):
includeBuild("..\\..\\path\\to\\plugin")
// build.gradle (Groovy DSL):
plugins {
id("asdf")
}
Or without hard-coding it in the build (so you can dynamically switch between local and published versions):
// build.gradle (Groovy DSL):
plugins {
id("asdf") version "1.4.0" // Version is optional (will be ignored when the command line switch below)
}
// Run with:
./gradlew --include-build "..\\..\\path\\to\\plugin" build
With #BjørnVester's answer I figured it out!
You need to put the buildscript in settings.gradle.kts as it doesn't get executed in the build.gradle.kts even when placed before plugins.
buildscript {
repositories {
flatDir {
dirs("..\\reusable-kotlin\\build\\libs") // <-- folder with jars
}
}
dependencies {
classpath("com.hedev.kotlin:reusable-kotlin:1.4.0")
}
}
But there's a catch! You must use the file-name of the jar in the classpath's name identifier that goes like this:
group:file-name:version
The file gradle will look for will be file-name-version.jar or file-name.jar which you'll see in the error message if you make a mistake (I added the _ on purpose to trigger the error):
Could not resolve all artifacts for configuration 'classpath'.
Could not find com.hedev.kotlin:reusable-kotlin_:1.4.0. Searched in the following locations:
- file:/C:/some/path/reusable-kotlin/build/libs/reusable-kotlin_-1.4.0.jar
- file:/C:/some/path/reusable-kotlin/build/libs/reusable-kotlin_.jar
In order for this to work I also had to add the group property to the plugin itself:
gradlePlugin {
plugins {
create("asdf") {
id = "asdf"
implementationClass = "com.hedev.kotlin.gradle.TestPlugin"
version = "1.4.0"
group = "com.hedev.kotlin"
}
}
}
Finally you can apply it in build.gradle.kts with (no version here):
plugins {
id("asdf")
}
I want to build a CLI tool with Kotlin Multiplatform which runs on Linux, Macos and Windows.
But I am struggling with setting up my build.gradle and my project structure. I am using IntelliJ IDEA 2020.1 and created my basic project with File -> New -> Project -> Kotlin / Native | Gradle
Currently I am looking through guides from kotlinlang.org but I am more falling then achieving something.
So far my build.gradle looks as follows:
plugins {
id 'org.jetbrains.kotlin.multiplatform' version '1.3.72'
}
repositories {
mavenCentral()
}
kotlin {
// For ARM, should be changed to iosArm32 or iosArm64
// For Linux, should be changed to e.g. linuxX64
// For MacOS, should be changed to e.g. macosX64
// For Windows, should be changed to e.g. mingwX64
linuxX64("linux") {
}
mingwX64("mingw") {
}
macosX64("macos") {
binaries {
executable {
// Change to specify fully qualified name of your application's entry point:
entryPoint = 'sample.main'
// Specify command-line arguments, if necessary:
runTask?.args('')
}
}
}
sourceSets {
commonMain {
kotlin.srcDir('src/main')
resources.srcDir('src/res')
dependencies {
implementation kotlin('stdlib-common')
implementation "com.github.ajalt:clikt-multiplatform:2.7.0"
}
}
commonTest {
dependencies {
implementation kotlin('test-common')
implementation kotlin('test-annotations-common')
}
}
macosX64().compilations.test.defaultSourceSet {
dependsOn commonMain
}
// Note: To enable common source sets please comment out
'kotlin.import.noCommonSourceSets' property
// in gradle.properties file and re-import your project in IDE.
macosMain {
}
macosTest {
}
}
}
wrapper {
gradleVersion = "6.4.1"
distributionType = "ALL"
}
And my project structure is still basic:
Project structure
Formerly I only worked on Android Projects with Kotlin, and I guess I am spoiled with gradle as Android generates the most basic stuff and everything is working without doing that much.
I understand that I need to create packages like linuxMain and mingwMain, but where to I put common sourcesets? I tried to create a package called commonMain, but it won't even let me create Kotlin files in that package.
When I am finished I want to have (in the best case) one common source set and one entry point for all my targets. Is this even possible?
As far as I can see, you specify your commonMain source set's source locations as /src/main/. By default, it's usually set onto /src/commonMain/kotlin/. So if you will remove those srcDir settings and create a .kt file in your /src/commonMain/kotlin/ folder, everything should work fine. Also, I hope you have removed 'kotlin.import.noCommonSourceSets' property from your gradle.properties as your script recommended.