Lambda not testable with Spock? - testing

I've got a problem with testing Java code using Groovy/Spock.
I wrote a short lambda-expression for filtering a list:
public List<myVO> getMeSomething() {
return RequestUtils.getRequestAttribut("somestuff", () -> getList().stream().filter(mt ->
!mt.isArchived()).filter(mt -> !mt.isSomething()).collect(toList()));
}
I used this to test it:
when:
2 * contextData.getList() >> [item1, item2]
List<myVO> list = context.getMeSomething()
then:
list.contains(item1)
!list.contains(item2)
This worked when run as single test. When I executed all tests in the project this one failed. I tried to extract the "getList()" into a local variable but it had no effect.
Then I changed the method to:
public List<myVO> getMeSomething() {
List<myVO> result = new ArrayList<>();
for (myVO vo : Objects.requireNonNull(getList())) {
if (!vo.isSomething() && !vo.isArchived()) {
result.add(vo);
}
}
return result;
}
And suddenly the test worked where it failed before. Is there any reason for this behavior? Is there a problem with testing a lambda with Spock?
Thanks!

Related

Why is the value not entering the list?

At 'urichecking2' log, I can see there is value. But in 'uriChecking' the uriList is null.
why the uriList.add not work??
private fun getPhotoList() {
val fileName = intent.getStringExtra("fileName")
Log.d("fileNameChecking", "$fileName")
val listRef = FirebaseStorage.getInstance().reference.child("image").child(fileName!!)
var tmpUrl:Uri = Uri.parse(fileName)
Log.d("firstTmpUri","$tmpUrl")
listRef.listAll()
.addOnSuccessListener { listResult ->
for (item in listResult.items) {
item.downloadUrl.addOnCompleteListener { task ->
if (task.isSuccessful) {
tmpUrl = task.result
Log.d("secondTmpUri","$tmpUrl")
Log.d("urichecking2","$task.result")
uriList.add(task.result)
} else {
}
}.addOnFailureListener {
// Uh-oh, an error occurred!
}
}
}
Log.d("thirdTmpUri","$tmpUrl")
Log.d("urichecking", "$uriList")
}
If I do this, the log is output in the order of first, third, and second, and the desired value is in second, but when third comes out, it returns to the value of first.
The listAll method (like most cloud APIs these days, including downloadUrl which you also use) is asynchronous, since it needs to make a call to the server - which may take time. This means the code executes in a different order than you may expect, which is easiest to see if you add some logging:
Log.d("Firebase","Before starting listAll")
listRef.listAll()
.addOnSuccessListener { listResult ->
Log.d("Firebase","Got listResult")
}
Log.d("Firebase","After starting listAll")
When you run this code it outputs:
Before starting listAll
After starting listAll
Got listResult
This is probably not the order you expected, but it perfectly explains why you can't see the list result. By the time your Log.d("urichecking", "$uriList") runs, none of the uriList.add(task.result) has been called yet.
The solution for this is always the same: any code that needs the list result, has to be inside the addOnCompleteListener callback, be called from there, or be otherwise synchronized.
So in its simplest way:
listRef.listAll()
.addOnSuccessListener { listResult ->
for (item in listResult.items) {
item.downloadUrl.addOnCompleteListener { task ->
if (task.isSuccessful) {
uriList.add(task.result)
Log.d("urichecking", "$uriList")
}
}
}
}
This is an incredibly common mistake to make if you're new to programming with asynchronous APIs, so I recommend checking out
Asynchronous programming techniques in the Kotlin language guide
How to get URL from Firebase Storage getDownloadURL
Can someone help me with logic of the firebase on success listener
Why does my function that calls an API or launches a coroutine return an empty or null value?

Unit can't be called in this context by implicit receiver

I am following this Kotlin example (https://www.jetbrains.com/help/teamcity/kotlin-dsl.html#Editing+Kotlin+DSL) and trying to write a kotlin script for my CI.
This is my code snippet
steps {
script {
name = "Style check"
id("StyleCheck")
enabled = false
scriptContent = """
#!/bin/bash
make docker run="make ci lint"
""".trimIndent()
}
I get an Error for the id() call which says
What does the error message mean?
How can I use id() call as given in the example?
This error happens because the method id(String) is defined in an outer scope, and to prevent you from accidentally using the wrong method, Kotlin gives you a compiler error.
In your case you should make sure that there's no other id that you want to use. Perhaps you wanted to use the property named id instead of the method?
Note that neither of the options below may have the same effect as you want. There might be a reason why the API is written like this to not allow you to call methods from outer receivers from inside inner scopes.
In order to use an explicit receiver, you can use this#methodName to call it. In this case, this#steps.
steps {
script {
name = "Style check"
this#steps.id("StyleCheck")
enabled = false
scriptContent = """
#!/bin/bash
make docker run="make ci lint"
""".trimIndent()
}
}
To understand exactly what's going on, and another way of using an explicit receiver, you could also do something like the below, where you save the this scope in a variable and then call it inside the script scope.
steps {
val stepsThis = this
script {
name = "Style check"
stepsThis.id("StyleCheck")
enabled = false
scriptContent = """
#!/bin/bash
make docker run="make ci lint"
""".trimIndent()
}
}
I also got the same error when working with jetpack compose when I was writing the code below.
In my case the context was not clear.
It was giving this error.
'fun item(key: Any? = ..., content: LazyItemScope.() -> Unit): Unit' can't be called in this context by implicit receiver. Use the explicit one if necessary
It says Unit can't be called in this context. Therefore I changed the context and everything got right.
Error code:
LazyColumn {
items(items = items) { word ->
if (word != null) {
WordColumnItem(word = word) {
onSelected(word)
}
}
//Notice the context
if(items.itemCount == 0) {
item(
content = { EmptyContent("No words") }
)
}
}
}
Correct code:
LazyColumn {
items(items = items) { word ->
if (word != null) {
WordColumnItem(word = word) {
onSelected(word)
}
}
}
//context changed.
if(items.itemCount == 0) {
item(
content = { EmptyContent("No words") }
)
}
}
Although I don't know how to use the explicit receiver.(if necessary)
Solution 1) I think error is clear.
2) You can use explicit receiver.

MockK mock method returning Interface Future

Hello I have following problem.
I am trying to mock call of injected executor
to execute given Callable immediately. Later in test arguments of methods called inside Callable are captured and arguments are asserted. Mock example see bellow.
Maven 3, jdk 10-slim, mockk 1.9
//this task should be executed by executor
private val taskCaptor = slot<Callable<Boolean>>()
private val asyncTaskExecutor: LazyTraceThreadPoolTaskExecutor = mockk<LazyTraceThreadPoolTaskExecutor>().apply {
//this was my 1st try, but resutt was java.lang.InstantiationError: java.util.concurrent.Callable
//every { submit(capture(taskCaptor)) } returns CompletableFuture.completedFuture(taskCaptor.captured.call())
//every { submit(any()) } returns CompletableFuture.completedFuture(true)
every { submit(ofType(Callable::class)) } returns FutureTask<Boolean>(Callable { true })
}
later on I have changed Callable interface to implementation, which I have created in tested class and I got another exception.
With same code as above exceptions was
java.lang.InstantiationError: java.util.concurrent.Future
which is return type of submit method.
Is my approach to mocking wrong?
not sure if this is the best way to implemented but for me it worked this way:
private val taskCaptor = slot<Callable<Boolean>>()
private val asyncTaskExecutor: LazyTraceThreadPoolTaskExecutor = mockk<LazyTraceThreadPoolTaskExecutor>().apply {
every { submit(ofType(Callable::class)) } returns mockFuture
every { mockFuture.get() } returns true
}

Authentication test running strange

I've just tried to write a simple test for Auth:
use Mockery as m;
...
public function testHomeWhenUserIsNotAuthenticatedThenRedirectToWelcome() {
$auth = m::mock('Illuminate\Auth\AuthManager');
$auth->shouldReceive('guest')->once()->andReturn(true);
$this->call('GET', '/');
$this->assertRedirectedToRoute('general.welcome');
}
public function testHomeWhenUserIsAuthenticatedThenRedirectToDashboard() {
$auth = m::mock('Illuminate\Auth\AuthManager');
$auth->shouldReceive('guest')->once()->andReturn(false);
$this->call('GET', '/');
$this->assertRedirectedToRoute('dashboard.overview');
}
This is the code:
public function getHome() {
if(Auth::guest()) {
return Redirect::route('general.welcome');
}
return Redirect::route('dashboard.overview');
}
When I run, I've got the following error:
EF.....
Time: 265 ms, Memory: 13.00Mb
There was 1 error:
1) PagesControllerTest::testHomeWhenUserIsNotAuthenticatedThenRedirectToWelcome
Mockery\Exception\InvalidCountException: Method guest() from Mockery_0_Illuminate_Auth_AuthManager should be called
exactly 1 times but called 0 times.
—
There was 1 failure:
1) PagesControllerTest::testHomeWhenUserIsAuthenticatedThenRedirectToDashboard
Failed asserting that two strings are equal.
--- Expected
+++ Actual
## ##
-'http://localhost/dashboard/overview'
+'http://localhost/welcome'
My questions are:
Two similar test cases but why the error output differs? First one the mock Auth::guest() is not called while the second one seems to be called.
On the second test case, why does it fail?
Is there any way to write better tests for my code above? Or even better code to test.
Above test cases, I use Mockery to mock the AuthManager, but if I use the facade Auth::shoudReceive()->once()->andReturn(), then it works eventually. Is there any different between Mockery and Auth::mock facade here?
Thanks.
You're actually mocking a new instance of the Illuminate\Auth\AuthManager and not accessing the Auth facade that is being utilized by your function getHome(). Ergo, your mock instance will never get called. (Standard disclaimer that none of the following code is tested.)
Try this:
public function testHomeWhenUserIsNotAuthenticatedThenRedirectToWelcome() {
Auth::shouldReceive('guest')->once()->andReturn(true);
$this->call('GET', '/');
$this->assertRedirectedToRoute('general.welcome');
}
public function testHomeWhenUserIsAuthenticatedThenRedirectToDashboard() {
Auth::shouldReceive('guest')->once()->andReturn(false);
$this->call('GET', '/');
$this->assertRedirectedToRoute('dashboard.overview');
}
If you check out Illuminate\Support\Facades\Facade, you'll see that it takes care of mocking for you. If you really wanted to do it the way that you were doing it (creating an instance of mock instance of Auth), you'd have to somehow inject it into the code under test. I believe that it could be done with something like this assuming that you extend from the TestCase class provided by laravel:
public function testHomeWhenUserIsNotAuthenticatedThenRedirectToWelcome() {
$this->app['auth'] = $auth = m::mock('Illuminate\Auth\AuthManager');
// above line will swap out the 'auth' facade with your facade.
$auth->shouldReceive('guest')->once()->andReturn(true);
$this->call('GET', '/');
$this->assertRedirectedToRoute('general.welcome');
}

How to run a simulation case using CaseRunner function?

I'm currently working on a Petrel plug-in in which I need to run a simulation case (through a "For Loop"), I create my case runner, export it and the run it...but after finishing the simulation and closing the console, I check the CaseRunner.IsRunning property and it shows true! This cause that the results have not been loaded to the petrel system.
I tried to load the results manually after finishing the Run of my case (using caserunner and also using a batch file in my code) and I can't see any results in the programming environment.
Does anybody have a solution for this situation?
This is the related part of my code:
Case theCase = arguments.TheCase;
Case Test2 = simroots.CreateCase(theCase, "FinalCase");
CaseRunner cRunners = SimulationSystem.GetCaseRunner(Test2);
cRunners.Export();
cRunners.Run();
bool b = cRunners.IsRunning;
actually I checked when the process finishes; after "cRunners.Run" the code waits for exit the process using:
System.Diagnostics.Process[] parray = System.Diagnostics.Process.GetProcesses();
foreach (System.Diagnostics.Process pr in parray)
{
if (pr.ProcessName == "cmd")
{
pr.WaitForExit();//just wait
}
}
and when the console closes itself, i checked the cRunners.IsRunning term.
However, I'm not so expert... can you show me an example of using CaseRunnerMonitor? both definition of the derived class and its implementation.
All I need is running a simulation case n times via a for loop and
after each Run access to its provided summary results.
I tried some different scenarios to get my desired results, I put here some of them
First I create my CaseRunnerMonitor class:
public class MyMonitor : CaseRunnerMonitor
{
//…
public override void RunCompleted()
{
// define arguments
foreach (Slb.Ocean.Petrel.DomainObject.Simulation.SummaryResult sr in simroot.SummaryResults)
{
IEnumerable ….
List ….
// some codes to change the input arguments according to the current step simulation summary results
}
PetrelLogger.InfoOutputWindow("MyMonitor is completed!");
}
//…
}
And then use it:
private void button1_Click(object sender, EventArgs e)
{
// Some codes that define some arguments…
for (int j = 0; j < 8; j++)
{
// some changes in the arguments
Case MyTest;
MyMonitor monit4 = new MyMonitor();
SimulationRoot simroot = SimulationRoot.Get(PetrelProject.PrimaryProject);
using (ITransaction trans = DataManager.NewTransaction())
{
trans.Lock(simroot);
MyTest = simroot.CreateCase(OriginalCase, MycaseNameFunc());
trans.Commit();
}
CaseRunner cRun = SimulationSystem.GetCaseRunner(MyTest);
cRun.Export();
cRun.Run(monit4);
//Wait(); //waits for current process to close
}
}
But the thing is that MyTest case results part are empty after my run is completed. in this case all the results loaded to the petrel when the 8th (last) simulation completes. If I don’t activate the Wait() function, all 8 runs are almost calling simultaneously…
I changed my scenario, my callback after each run is read the simulation results, change something and call next run so
I create my CaseRunnerMonitor class:
public class MyMonitor2 : CaseRunnerMonitor
{
//…
public override void RunCompleted()
{
// define arguments
index++;
if (index <=8)
{
foreach (Slb.Ocean.Petrel.DomainObject.Simulation.SummaryResult sr in simroot.SummaryResults)
{
IEnumerable ….
List ….
// some codes to change the input arguments according to the current step simulation summary results
}
Case MyTest;
MyMonitor monit4 = new MyMonitor();
SimulationRoot simroot = SimulationRoot.Get(PetrelProject.PrimaryProject);
using (ITransaction trans = DataManager.NewTransaction())
{
trans.Lock(simroot);
MyTest = simroot.CreateCase(OriginalCase, MycaseNameFunc());
trans.Commit();
}
CaseRunner cRun = SimulationSystem.GetCaseRunner(MyTest);
cRun.Export();
cRun.Run(monit4);
}
PetrelLogger.InfoOutputWindow("MyMonitor2 is completed!");
}
//…
}
And then use it:
private void button1_Click(object sender, EventArgs e)
{
Index=0;
// Some codes that define some arguments…
// some changes in the arguments
Case MyTest;
MyMonitor monit5 = new MyMonitor();
SimulationRoot simroot = SimulationRoot.Get(PetrelProject.PrimaryProject);
using (ITransaction trans = DataManager.NewTransaction())
{
trans.Lock(simroot);
MyTest = simroot.CreateCase(OriginalCase, MycaseNameFunc());
trans.Commit();
}
CaseRunner cRun = SimulationSystem.GetCaseRunner(MyTest);
cRun.Export();
cRun.Run(monit5);
}
in this situation no need to wait() function is required. But the problem is that I access to MyTest case results in one level before the current run completes. i.e, I can view the step 5 results via MyTest.Results when the run 6 is completed while step 6 results are empty despite of completion of its run.
I check the CaseRunner.IsRunning property and it shows true
This is because Caserunner.Run() is non-blocking; that is, it starts another thread to launch the run. Control flow then passes immediately to your cRunners.IsRunning check which is true as simulation is in progress.
cRunners.Run(); //non-blocking
bool b = cRunners.IsRunning;
You should look at CaseRunnerMonitor if you want a call-back when the simulation is complete.
Edit:
can you show me an example of using CaseRunnerMonitor? both definition of the derived class and its implementation.
Create your monitor class:
public class CustomCaseRunnerMonitor : CaseRunnerMonitor
{
//...
public override void RunCompleted()
{
//This is probably the callback you want
}
}
Use it:
Case myCase = WellKnownSimulators.ECLIPSE100.CreateSimulationCase(...);
CaseRunner runner = SimulationSystem.GetCaseRunner(myCase);
var myMonitor = new CustomCaseRunnerMonitor(...);
runner.Run(myMonitor);
//Your callbacks defined in your CustomCaseRunnerMonitor will now be called
See also "Running and monitoring a Simulation" in SimulationSystem API documentation.
Ah, OK. I didn't realise you were trying to load results with the CaseMonitor.
I'm afraid the short answer is "No, you can't know when Petrel has loaded results".
The long answer is Petrel will automatically load results if the option is set in the Case arguments. (Define Simulation Case -> Advance -> Automatically load results).
In API:
EclipseFormatSimulator.Arguments args = EclipseFormatSimulator.GetEclipseFormatSimulatorArguments(myCase);
EclipseFormatSimulator.Arguments.RuntimeArguments runtimeArgs = args.Runtime;
runtimeArgs.AutoLoadResults = true;
runtimeArgs.AutoLoadResultsInterval = 120; //How frequently in seconds Petrel polls sim dir.
You will have to poll SimulationRoot.SummaryResults (using the same API you are already using) after case has finished.
You should use the CaseRunnerMonitor we discussed to determine when to start doing this, rather than the System.Diagnostics.Process[] parray = System.Diagnostics.Process.GetProcesses(); code you currently have.