Can anybody give me an example for a continuous, monotone, and quasi concave function that is not concave?
Continuous
Has a value everywhere.
Monotone
(x <= y) => (f(x) <= f(y))
or
(x <= y) => (f(x) >= f(y))
Concave
f'(x) is monotonically decreasing. If f'(x) is constant on an interval [a, b] where a <> b, then f is not strictly concave.
The construction of an example
Take the logarithm as a starting point. It is, continuous monotonically (on the realm of positive real numbers) increasing, quasiconcave AND concave. Not quite the result we expect yet, but pretty close to it:
ln'(x) = 1/x
ln(1) = 0
now, let's define a function as follows:
f(x) = ln(x), if x < 1 or x > 2
f(1), if 1 <= x <= 2
Related
I'm struggling a bit finding a fast algorithm that's suitable.
I just want to minimize:
norm2(x-s)
st
G.x <= h
x >= 0
sum(x) = R
G is sparse and contains only 1s (and zeros obviously).
In the case of iterative algorithms, it would be nice to get the interim solutions to show to the user.
The context is that s is a vector of current results, and the user is saying "well the sum of these few entries (entries indicated by a few 1.0's in a row in G) should be less than this value (a row in h). So we have to remove quantities from the entries the user specified (indicated by 1.0 entries in G) in a least-squares optimal way, but since we have a global constraint on the total (R) the values removed need to be allocated in a least-squares optimal way amongst the other entries. The entries can't go negative.
All the algorithms I'm looking at are much more general, and as a result are much more complex. Also, they seem quite slow. I don't see this as a complex problem, although mixes of equality and inequality constraints always seem to make things more complex.
This has to be called from Python, so I'm looking at Python libraries like qpsolvers and scipy.optimize. But I suppose Java or C++ libraries could be used and called from Python, which might be good since multithreading is better in Java and C++.
Any thoughts on what library/package/approach to use to best solve this problem?
The size of the problem is about 150,000 rows in s, and a few dozen rows in G.
Thanks!
Your problem is a linear least squares:
minimize_x norm2(x-s)
such that G x <= h
x >= 0
1^T x = R
Thus it fits the bill of the solve_ls function in qpsolvers.
Here is an instance of how I imagine your problem matrices would look like, given what you specified. Since it is sparse we should use SciPy CSC matrices, and regular NumPy arrays for vectors:
import numpy as np
import scipy.sparse as spa
n = 150_000
# minimize 1/2 || x - s ||^2
R = spa.eye(n, format="csc")
s = np.array(range(n), dtype=float)
# such that G * x <= h
G = spa.diags(
diagonals=[
[1.0 if i % 2 == 0 else 0.0 for i in range(n)],
[1.0 if i % 3 == 0 else 0.0 for i in range(n - 1)],
[1.0 if i % 5 == 0 else 0.0 for i in range(n - 1)],
],
offsets=[0, 1, -1],
)
a_dozen_rows = np.linspace(0, n - 1, 12, dtype=int)
G = G[a_dozen_rows]
h = np.ones(12)
# such that sum(x) == 42
A = spa.csc_matrix(np.ones((1, n)))
b = np.array([42.0]).reshape((1,))
# such that x >= 0
lb = np.zeros(n)
Next, we can solve this problem with:
from qpsolvers import solve_ls
x = solve_ls(R, s, G, h, A, b, lb, solver="osqp", verbose=True)
Here I picked CVXOPT but there are other open-source solvers you can install such as ProxQP, OSQP or SCS. You can install a set of open-source solvers by: pip install qpsolvers[open_source_solvers]. After some solvers are installed, you can list those for sparse matrices by:
print(qpsolvers.sparse_solvers)
Finally, here is some code to check that the solution returned by the solver satisfies our constraints:
tol = 1e-6 # tolerance for checks
print(f"- Objective: {0.5 * (x - s).dot(x - s):.1f}")
print(f"- G * x <= h: {(G.dot(x) <= h + tol).all()}")
print(f"- x >= 0: {(x + tol >= 0.0).all()}")
print(f"- sum(x) = {x.sum():.1f}")
I just tried it with OSQP (adding the eps_rel=1e-5 keyword argument when calling solve_ls, otherwise the returned solution would be less accurate than the tol = 1e-6 tolerance) and it found a solution is 737 milliseconds on my (rather old) CPU with:
- Objective: 562494373088866.8
- G * x <= h: True
- x >= 0: True
- sum(x) = 42.0
Hoping this helps. Happy solving!
These are the conditions:
if(x > 0)
{
y >= a;
z <= b;
}
It is quite easy to convert the conditions into Linear Programming constraints if x were binary variable. But I am not finding a way to do this.
You can do this in 2 steps
Step 1: Introduce a binary dummy variable
Since x is continuous, we can introduce a binary 0/1 dummy variable. Let's call it x_positive
if x>0 then we want x_positive =1. We can achieve that via the following constraint, where M is a very large number.
x < x_positive * M
Note that this forces x_positive to become 1, if x is itself positive. If x is negative, x_positive can be anything. (We can force it to be zero by adding it to the objective function with a tiny penalty of the appropriate sign.)
Step 2: Use the dummy variable to implement the next 2 constraints
In English: if x_positive = 1, then y >= a
However, if x_positive = 0, y can be anything (y > -inf)
y > a - M (1 - x_positive)
Similarly,
if x_positive = 1, then z <= b
z <= b + M * (1 - x_positive)
Both the linear constraints above will kick in if x>0 and will be trivially satisfied if x <=0.
I am trying to write the code for solving the extremely difficult differential equation:
x' = 1
with the finite element method.
As far as I understood, I can obtain the solution u as
with the basis functions phi_i(x), while I can obtain the u_i as the solution of the system of linear equations:
with the differential operator D (here only the first derivative). As a basis I am using the tent function:
def tent(l, r, x):
m = (l + r) / 2
if x >= l and x <= m:
return (x - l) / (m - l)
elif x < r and x > m:
return (r - x) / (r - m)
else:
return 0
def tent_half_down(l,r,x):
if x >= l and x <= r:
return (r - x) / (r - l)
else:
return 0
def tent_half_up(l,r,x):
if x >= l and x <= r:
return (x - l) / (r - l)
else:
return 0
def tent_prime(l, r, x):
m = (l + r) / 2
if x >= l and x <= m:
return 1 / (m - l)
elif x < r and x > m:
return 1 / (m - r)
else:
return 0
def tent_half_prime_down(l,r,x):
if x >= l and x <= r:
return - 1 / (r - l)
else:
return 0
def tent_half_prime_up(l, r, x):
if x >= l and x <= r:
return 1 / (r - l)
else:
return 0
def sources(x):
return 1
Discretizing my space:
n_vertex = 30
n_points = (n_vertex-1) * 40
space = (0,5)
x_space = np.linspace(space[0],space[1],n_points)
vertx_list = np.linspace(space[0],space[1], n_vertex)
tent_list = np.zeros((n_vertex, n_points))
tent_prime_list = np.zeros((n_vertex, n_points))
tent_list[0,:] = [tent_half_down(vertx_list[0],vertx_list[1],x) for x in x_space]
tent_list[-1,:] = [tent_half_up(vertx_list[-2],vertx_list[-1],x) for x in x_space]
tent_prime_list[0,:] = [tent_half_prime_down(vertx_list[0],vertx_list[1],x) for x in x_space]
tent_prime_list[-1,:] = [tent_half_prime_up(vertx_list[-2],vertx_list[-1],x) for x in x_space]
for i in range(1,n_vertex-1):
tent_list[i, :] = [tent(vertx_list[i-1],vertx_list[i+1],x) for x in x_space]
tent_prime_list[i, :] = [tent_prime(vertx_list[i-1],vertx_list[i+1],x) for x in x_space]
Calculating the system of linear equations:
b = np.zeros((n_vertex))
A = np.zeros((n_vertex,n_vertex))
for i in range(n_vertex):
b[i] = np.trapz(tent_list[i,:]*sources(x_space))
for j in range(n_vertex):
A[j, i] = np.trapz(tent_prime_list[j] * tent_list[i])
And then solving and reconstructing it
u = np.linalg.solve(A,b)
sol = tent_list.T.dot(u)
But it does not work, I am only getting some up and down pattern. What am I doing wrong?
First, a couple of comments on terminology and notation:
1) You are using the weak formulation, though you've done this implicitly. A formulation being "weak" has nothing to do with the order of derivatives involved. It is weak because you are not satisfying the differential equation exactly at every location. FE minimizes the weighted residual of the solution, integrated over the domain. The functions phi_j actually discretize the weighting function. The difference when you only have first-order derivatives is that you don't have to apply the Gauss divergence theorem (which simplifies to integration by parts for one dimension) to eliminate second-order derivatives. You can tell this wasn't done because phi_j is not differentiated in the LHS.
2) I would suggest not using "A" as the differential operator. You also use this symbol for the global system matrix, so your notation is inconsistent. People often use "D", since this fits better to the idea that it is used for differentiation.
Secondly, about your implementation:
3) You are using way more integration points than necessary. Your elements use linear interpolation functions, which means you only need one integration point located at the center of the element to evaluate the integral exactly. Look into the details of Gauss quadrature to see why. Also, you've specified the number of integration points as a multiple of the number of nodes. This should be done as a multiple of the number of elements instead (in your case, n_vertex-1), because the elements are the domains on which you're integrating.
4) You have built your system by simply removing the two end nodes from the formulation. This isn't the correct way to specify boundary conditions. I would suggesting building the full system first and using one of the typical methods for applying Dirichlet boundary conditions. Also, think about what constraining two nodes would imply for the differential equation you're trying to solve. What function exists that satisfies x' = 1, x(0) = 0, x(5) = 0? You have overconstrained the system by trying to apply 2 boundary conditions to a first-order differential equation.
Unfortunately, there isn't a small tweak that can be made to get the code to work, but I hope the comments above help you rethink your approach.
EDIT to address your changes:
1) Assuming the matrix A is addressed with A[row,col], then your indices are backwards. You should be integrating with A[i,j] = ...
2) A simple way to apply a constraint is to replace one row with the constraint desired. If you want x(0) = 0, for example, set A[0,j] = 0 for all j, then set A[0,0] = 1 and set b[0] = 0. This substitutes one of the equations with u_0 = 0. Do this after integrating.
I am trying to graph two functions, but i want to graph one function for a condition but graph using another function if another condition is met.
A simple example would be:
if x > 0
then sin(x)
else cos(x)
It would then graph cos and sin depending on the x value, there being an obvious gap at x = 0, as cos(0) = 1 and sin(0) = 0.
EDIT: There is a built-in way. I'll leave my original answer below for posterity, but try using the piecewise() function:
plot(piecewise(((cos(x),x<0), (sin(x), 0<x))))
See it here.
I would guess that there's a built-in way to do this, but I don't know it. You can multiply your functions by the Heaviside Step Function to accomplish this task. The step function is 1 if x > 0 and 0 if x < 0, so multiplying this into your functions and then summing them together will select only one of them based on the sign of x, that is to say:
f(x) := heaviside(x) * sin(x) + heaviside(-x) * cos(x)
If x > 0, heaviside(x) = 1 and heaviside(-x) = 0, so f(x) = sin(x).
If x < 0, heaviside(x) = 0 and heaviside(-x) = 1, so f(x) = cos(x).
See it in action here. In general, note that if you want the transition to be at x = a, then you could do heaviside(x-a) and heaviside(-x+a), respectively. If you want N functions, you'll have to have (N-1) multiplied step functions on each term, each with their own (x-a_i) argument. I hope someone else can contribute a cleaner solution.
is there a possibility to create a confidence interval for conditional probabilities? I found some formula to create a CI for probabilities, but not for this special case.
Confidence Intervals
I think you mean a confidence interval for a random variable. For example, if I have a continuous real-valued random variable X, I could say something like
P(a <= X <= b) = 0.95
meaning I am 95% confident that X is between a and b.
Conditional Confidence Intervals
A conditional confidence interval would be a statement like
P(a <= X <= b | Y = y) = 0.95
meaning, when Y is y, I am 95% confident that X is between a and b, where Y is some other random variable.