I have entered my Jetbrains license and already created a project three times now. I imported IDE settings which requires a restart and when the restart happens poof the license/activation key is gone as well as the project that had already been opened.
This is a strange behavior. I have installed and used the jetbrains products many dozens of times on different computers and had not seen this before. In fact DataSpell and Pycharm are working normally on this same computer.
I am on macOS Monterey 12.5.1
This problem has been identified as being due to using the "import Settings" feature. When I do that and restart Intellij then the activation code and in fact all past knowledge of my installation are gone. #CrazyCoder
As an daily IntelliJ user you usually concentrate on the projects you are working on and IntelliJ is just a tool. You are not willing to dig into tool's problem itself. But this is what is forced on you by default after IntelliJ installation on MacOS and opening relatively big project(most of the projects nowadays are huge and have thousands of files and use numbers of IntelliJ 3rd party plugins).
Here is a minimal list of actions. IntelliJ must have set MORE RAM to be used by default.
Read: https://intellij-support.jetbrains.com/hc/en-us/articles/207241085-Locating-IDE-log-files .
From IntelliJ open Help / Show log in Finder and open idea.log file with Console.app; In Console.app press "Reload" and "Now" buttons to track "live" what IntelliJ is doing.
If in logs of IntelliJ you find that some of the plugins exit with fatal error, you just uninstall those plugins. For me the one that failed to the moment of this answer was "BashSupport" as example.
Start Terminal.app ; Run command: open -a TextEdit /Applications/IntelliJ\ IDEA.app/Contents/bin/idea.vmoptions ; Change options in idea.vmoptions file to:
-Xms1024m
-Xmx2048m ; Read https://www.jetbrains.com/help/idea/tuning-the-ide.html to see how you can tune IntelliJ for your project. This step is handy when your IntelliJ app doesn't start at all and you want to change properties in a global way.
From IntelliJ open Help / Edit Custom Properties.... Here you can set same properties that will override global and will work only for current OS user.
Also there is also a possibility of underlying OS to do it voodoo magic so the IntelliJ won't work as it should like here - https://intellij-support.jetbrains.com/hc/en-us/community/posts/360000398280-IDEA-Ultimate-2018-2-Unable-to-save-settings-Unable-to-create-file-Windows-10
Make sure your project build output for *.class files is set. Read: https://intellij-support.jetbrains.com/hc/en-us/community/posts/360000000584-Build-does-nothing . In my case when IntelliJ started project build it terminated without warnings shortly after.
Finally in my case none of 6 steps above solved the issue so I found this read: https://intellij-support.jetbrains.com/hc/en-us/community/posts/115000532044-IntelliJ-cannot-build-projects . Basically try reinstall IntelliJ from original distribution again.
I know that you must read https://www.jetbrains.com/help/idea every time you install a new version of IntelliJ, but why not to add some consistency into configuration process of the main java process that runs IntelliJ itself? You can ask how much ram to use during installation of IntelliJ and explain why it is so. Then Help digging won't be necessary in the first place for devs who fed up with changing those default settings that will be always more than 700MB. I think for most devs out there it is at least 10x of that. I bet what makes most devs mad about this is not the fact that you need to do some options changing, but where those options are depending on OS plus the fact that you simply forget why IntelliJ app just exits while you are doing a debugging of your own app. I bet this problem makes us mad since first java based IDEs appeared. User-friendly is the key here and explicit reminders within the app itself would help.
I use IntelliJ IDEA community (currently 2017.2) from both Windows and Linux with settings shared between the two via the settings repository. In the main this works well but sometimes I will open IntelliJ from either OS and find the font sizes for the editor, console and UI have increased from 14 to 17.
I notice that when this happens it's because FONT_SCALE in ~/.IdeaIC2017.2/config/settingsRepository/repository/ui.lnf.xml has been changed from 1.0 to 1.25 by the commit made when I previously closed IntelliJ on the other OS. This seems to happen occasionally in both directions. I'm not changing anything myself that should affect this.
How do I prevent this from happening?
I've reported a bug, please follow for updates:
IDEA-172611 Don't share FONT_SCALE setting between different operating systems
I have come across this particular problem several times across several versions of the IAR embedded workbench (EW430 5.40.7 [EW 6.0], EW430 5.51.2 [EW 6.4], EW430 6.20.1 [EW 7.0]), but each time only after a long period of having no problems. The problem doesn't seem to have affected the other firmware developers in the office, so no help can be offered there. I'm currently on Windows 10, but the problems first occurred when I was on Windows 8.1 (same PC.)
The problem is that, for no obvious trigger, the IAR ide will start to hang until terminated (or it will just crash on one of the EW versions) on any attempt to change the active build configuration in MSP430 projects using the emulator.
From my testing, it appears to be directly related to something the IDE is doing with the emulator, as when the build configuration is changed, I can see the emulator menu in the menu bar disappear, then the hang happens. Under normal circumstances, the menu will disappear, but then reappear once the other debug configuration is completely loaded.
I have tried the default project "flashing the LED" to see if it was only my project - but if I select the msp430x4xx (C) - Debug, right click it and select "Set as Active" from the context menu, to make this the active project, the IDE also hung. I then reopened the EW IDE, and opened the LED flashing project again. The original 1xx asm project was the active project.
I then changed the settings of the 4xx (C) Debug project (without making it the active project) from the emulator to the simulator, and clicked OK. The program did NOT crash.
I then set the 4xx (C) Debug project as the active project and it did NOT crash. The simulator even runs without problems.
The version of the FET firmware didn't change from when the IDE worked correctly to when it didn't, and the FET is not even used at this point. It can be completely disconnected and the same results will occur.
I have tried the following, without success:
erasing the files in my project folder's settings subfolder
erasing the *.dep files in the project folder.
deleting the IarIdePm.ini file from AppData\Roaming\IAR Embedded Workbench
making sure none of the project files are read-only
reinstalling the program to the same location
removing and reinstalling the program to the same location.
What does solve the problem (until it reoccurs) is to reinstall the program, but to a different directory (for e.g., the default directory will be in program files (x86)\IAR Systems\Embedded Workbench x.x. Installing again into program files (x86)\IAR Systems\EWx (just so it is different) allowed that installation to work, but the old installation continued to fail.
Best advice so far (from our support person) has been to do the above, install to another directory and live with it, as it doesn't happen often.
Since it has happened to me on 3 occasions with 3 different versions of the program, I would like to know how to fix or prevent it! If anyone could offer anything to try (or even better, a straight solution :)) that would be greatly appreciated!
Cheers!
Since newer versions and updates on W10, it seems that old compatibilities are being removed from this OS. I have no direct solution for this problem since Microsoft does not promise support for old software and hardware. Even I tried to find a solution for that problem, and I found on the IAR website a list of IDE's and their compatible versions. (remember, old versions are not compatible)
( https://www.iar.com/knowledge/support/technical-notes/ide/windows-10-and-iar-embedded-workbench/ )
You will need to update your IDE and program version to a newer version if you plan to continue to use this IDE natively on Windows 10 or you may use Virtual machines with an old operational system (like Windows 7) to compile your program on old IDE.
P.S.1 I manually uninstalled KB4592449 recently updated and the program return to work natively. Probably it will continue working until this update (or other similar) being installed again on the computer, but probably there is any vulnerability that the computer will be exposed to, and in this case, I'm paying the price.
P.S.2 KB4580325 promotes the same behavior in IAR 5.11 on windows 10. Both KB's implement securities about the flash player - that I Don't use - then, I can securely uninstall it.
P.S.3 Since I updated my windows up to Windows 10 version 21H1 (compilation 19043.1165) AND I configured Windows defender to not be monitoring IAR IDE (IarIdePM.exe) disabling all protections available, everything works fine. But Remember: my program is original, not cracked or altered by anything, then I am secure to do what I did.
It is a 'natural' that software problem. Not found way of fixing it. The solution temporary is modify manually the file .eww for change of project active. The ultimate solution is to use another development environment.
I downloaded the community edition of IntelliJ as ideaIC-14.0.2.exe.
I ran ideaIC-14.0.2.exe with evelated rights on a Windows 7 64 laptop with the 32 bit version of Java 6 installed.
I notice that two copies of ideaIC-14.0.2.exe appears in task explorer when none were previously present.
Both tasks go away without the setup wizard ever appearing5. I saw nothing related in the Event log.
Do you know how I might be able to overcome this issue and install this app?
Disabling the Firewall was previously suggested and tried.Usually, I run every setup program with elevated rights. I was told that I never need Admin rights to install. This time, I added myself to the Admin user group (which you would think shouldn't be possible!) and then ran setup after once again disabling my firewall. And this time, it worked! I suppose it's possible that I did not disable all of the firewall options last time, but I believe I did. If so, elevated rights must have been insufficient. I forgot to try unchecking the Unblock property on the file-that was a good suggestion, though.