I create a virtual environment by Anaconda in Ubuntu 14.04 and installed cmake in this virtual environment. I have installed opengl by apt-get. However, cmake couldn't find the opengl. Do I need to set up some environment variable？
The error output is as followed:
CMake Error at /home/*/.conda/envs/gfb/share/cmake-3.18/Modules/FindPackageHandleStandardArgs.cmake:165 (message):
Could NOT find OpenGL (missing: OPENGL_opengl_LIBRARY OPENGL_glx_LIBRARY)
Call Stack (most recent call first):
/home/*/.conda/envs/gfb/share/cmake-3.18/Modules/FindPackageHandleStandardArgs.cmake:458 (_FPHSA_FAILURE_MESSAGE)
/home/*/.conda/envs/gfb/share/cmake-3.18/Modules/FindOpenGL.cmake:433 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
CMakeLists.txt:28 (FIND_PACKAGE)
Related
I am following this tutorial to build OSRM-backend from source.
When it says:
cd build
cmake /srv/osrm/osrm-backend/
I got this error message:
ERROR: Intel TBB NOT found!
-- Looked for Threading Building Blocks in /usr
CMake Error at cmake/FindTBB.cmake:274 (message):
Could NOT find TBB library.
Call Stack (most recent call first):
CMakeLists.txt:533 (find_package)
I have installed TBB:
sudo apt install -y libtbb
And it looks good:
/usr/lib/x86_64-linux-gnu/libtbb.so
/usr/lib/x86_64-linux-gnu/libtbb.so.2
(...)
But cmake fails.
I'd go to the file from the error message and see that it can't find the library at some default paths.
It means we have to help cmake a bit. At the beginning we can see that this module respects TBB_INSTALL_DIR. So I'd try setting it while configuring the project.
It's hard to find the solution, althought, it says, there're duplications:
This is a duplicate of #6248 and #6253. Building with
cmake -DENABLE_MASON=ON will fix it.
Surprisingly, on MacOS, there's a simple workaround:
brew install osrm-backend
I'm trying to install software from GitHub (GLSLIM, link) on Ubuntu 22.04 LTS. Among the requirements, there are both MPI and CMake. I installed both of them with the libraries, which I've found on the websites (CMake and openmpi). When I try to do the GLSLIM build, I get the following error:
-- Could NOT find MPI_C (missing: MPI_C_LIB_NAMES MPI_C_WORKS)
-- Could NOT find MPI_CXX (missing: MPI_CXX_LIB_NAMES MPI_CXX_WORKS)
CMake Error at /usr/local/share/cmake-3.23/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find MPI (missing: MPI_C_FOUND MPI_CXX_FOUND)
Call Stack (most recent call first):
/usr/local/share/cmake-3.23/Modules/FindPackageHandleStandardArgs.cmake:594 (_FPHSA_FAILURE_MESSAGE)
/usr/local/share/cmake-3.23/Modules/FindMPI.cmake:1830 (find_package_handle_standard_args)
CMakeLists.txt:6 (find_package)
I've searched on the Internet for possible solutions, and I've found plenty of similar problems. For example, those are some related StackOverflow questions: first, second, third, fourth, etc.
Anyway, none of them solved my problem, nor did it seem strictly related to it.
I don't know where to start in trying to find a solution. Any help is really appreciated.
maybe use the following:
sudo rm -f /etc/aternatives/mpi* /var/lib/dpkg/alternatives/mpi*
sudo apt install openmpi-bin
(Source)
I am trying to catkin_make in my catkin workspace, but I get the following error
CMake Deprecation Warning at gazebo_ros_demos/gazebo_tutorials/CMakeLists.txt:1
(cmake_minimum_required): Compatibility with CMake < 2.8.12 will be
removed from a future version of CMake.
Update the VERSION argument value or use a ... suffix to
tell CMake that the project does not need compatibility with older
versions.
-- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy
-- Found Boost: /usr/include (found suitable version "1.58.0", minimum required is "1.40.0") found components: thread signals system
filesystem program_options regex iostreams date_time chrono atomic
CMake Error at
/usr/share/cmake-3.20/Modules/FindPackageHandleStandardArgs.cmake:230
(message): Could NOT find Protobuf (missing: Protobuf_INCLUDE_DIR)
Call Stack (most recent call first):
/usr/share/cmake-3.20/Modules/FindPackageHandleStandardArgs.cmake:594
(_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake-3.20/Modules/FindProtobuf.cmake:646
(FIND_PACKAGE_HANDLE_STANDARD_ARGS)
/usr/lib/x86_64-linux-gnu/cmake/gazebo/gazebo-config.cmake:114
(FIND_PACKAGE) gazebo_ros_demos/gazebo_tutorials/CMakeLists.txt:11
(find_package)
-- Configuring incomplete, errors occurred! See also "/home/ashwin/catkin_ws/build/CMakeFiles/CMakeOutput.log". See also
"/home/ashwin/catkin_ws/build/CMakeFiles/CMakeError.log".
Makefile:5582: recipe for target 'cmake_check_build_system' failed
make: *** [cmake_check_build_system] Error 1 Invoking "make
cmake_check_build_system" failed
This issue came up when I tried to update my cmake to 3.20. I am fairly new to Ubuntu. Would appreciate any help.
I have encountered the same issue (on ubuntu 18.04). Installing the following packages resolved the issue for me:
sudo apt-get install libprotobuf-dev protobuf-compiler
These are similar to the packages mentioned by K.S., but with those packages I got the same error as Ashwin mentioned in the comments on K.S.'s answer.
I'm trying to follow the steps on this link:https://github.com/cpp-io2d/P0267_RefImpl/blob/master/BUILDING.md
to install io2d.
However I get an error message after I write the cmake ..:
C:\Users\walid\Desktop\Udacity_Nanodegree\RoutePlanningProject\build>cmake ..
-- Selecting Windows SDK version 10.0.17763.0 to target Windows 10.0.18362.
CMake Error at CMakeLists.txt:15 (find_package):
By not providing "Findio2d.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "io2d", but
CMake did not find one.
Could not find a package configuration file provided by "io2d" with any of
the following names:
io2dConfig.cmake
io2d-config.cmake
Add the installation prefix of "io2d" to CMAKE_PREFIX_PATH or set
"io2d_DIR" to a directory containing one of the above files. If "io2d"
provides a separate development package or SDK, be sure it has been
installed.
-- Configuring incomplete, errors occurred!
See also "C:/Users/walid/Desktop/Udacity_Nanodegree/RoutePlanningProject/build/CMakeFiles/CMakeOutput.log".
Therefore I found this suggestion On StackOverflow:
CMake third-party library installation
But I get a new error message here it is:
cmake --config Debug "-DCMAKE_BUILD_TYPE=Debug" ..
-- Selecting Windows SDK version 10.0.17763.0 to target Windows 10.0.18362.
Default IO2D backend was not specified, choosing automatically...
Found Windows, using CAIRO_WIN32.
-- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE)
CMake Error at C:/CMake/cmake-3.17.3-win64-x64/share/cmake-3.17/Modules/FindPackageHandleStandardArgs.cmake:164 (message):
Could NOT find Cairo (missing: CAIRO_INCLUDE_DIRS CAIRO_LIBRARIES)
Call Stack (most recent call first):
C:/CMake/cmake-3.17.3-win64-x64/share/cmake-3.17/Modules/FindPackageHandleStandardArgs.cmake:445 (_FPHSA_FAILURE_MESSAGE)
cmake/FindCairo.cmake:102 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
P0267_RefImpl/P0267_RefImpl/cairo/CMakeLists.txt:5 (find_package)
PS: I'm using Windows, I have CMake,Make,g++ and gcc installed.
Here is a screenshot demonstrating that I have Cairo already installed:
I'm trying to install darktable from source. To this end,
I downloaded darktable-2.4.4.tar.xz from here. After unpacking I try to build it with
sudo ./build.sh
I get the following errors:
(...)
-- Checking for one of the modules 'libsoup-2.2;libsoup2'
-- Could NOT find WEBP (missing: WEBP_LIBRARY WEBP_INCLUDE_DIR) (Required is at least version "0.3.0")
CMake Error at /usr/share/cmake-3.10/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find LENSFUN (missing: LENSFUN_LIBRARY LENSFUN_INCLUDE_DIR)
Call Stack (most recent call first):
/usr/share/cmake-3.10/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
cmake/modules/FindLensFun.cmake:37 (find_package_handle_standard_args)
src/CMakeLists.txt:286 (find_package)
However, both WEBP and LENSFUN are installed.
sudo apt-get install webp
Reading package lists... Done
Building dependency tree
Reading state information... Done
webp is already the newest version (0.6.1-2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
LENSFUN was installed from source.
It's worth mentioning build.sh uses cmake.
What can I do to solve these problems?