What does ArrayIndexOutOfBoundsException mean and how do I get rid of it?
Here is a code sample that triggers the exception:
String[] names = { "tom", "bob", "harry" };
for (int i = 0; i <= names.length; i++) {
System.out.println(names[i]);
}
Your first port of call should be the documentation which explains it reasonably clearly:
Thrown to indicate that an array has been accessed with an illegal index. The index is either negative or greater than or equal to the size of the array.
So for example:
int[] array = new int[5];
int boom = array[10]; // Throws the exception
As for how to avoid it... um, don't do that. Be careful with your array indexes.
One problem people sometimes run into is thinking that arrays are 1-indexed, e.g.
int[] array = new int[5];
// ... populate the array here ...
for (int index = 1; index <= array.length; index++)
{
System.out.println(array[index]);
}
That will miss out the first element (index 0) and throw an exception when index is 5. The valid indexes here are 0-4 inclusive. The correct, idiomatic for statement here would be:
for (int index = 0; index < array.length; index++)
(That's assuming you need the index, of course. If you can use the enhanced for loop instead, do so.)
if (index < 0 || index >= array.length) {
// Don't use this index. This is out of bounds (borders, limits, whatever).
} else {
// Yes, you can safely use this index. The index is present in the array.
Object element = array[index];
}
See also:
The Java Tutorials - Language Basics - Arrays
Update: as per your code snippet,
for (int i = 0; i<=name.length; i++) {
The index is inclusive the array's length. This is out of bounds. You need to replace <= by <.
for (int i = 0; i < name.length; i++) {
From this excellent article: ArrayIndexOutOfBoundsException in for loop
To put it briefly:
In the last iteration of
for (int i = 0; i <= name.length; i++) {
i will equal name.length which is an illegal index, since array indices are zero-based.
Your code should read
for (int i = 0; i < name.length; i++)
^
It means that you are trying to access an index of an array which is not valid as it is not in between the bounds.
For example this would initialize a primitive integer array with the upper bound 4.
int intArray[] = new int[5];
Programmers count from zero. So this for example would throw an ArrayIndexOutOfBoundsException as the upper bound is 4 and not 5.
intArray[5];
What causes ArrayIndexOutOfBoundsException?
If you think of a variable as a "box" where you can place a value, then an array is a series of boxes placed next to each other, where the number of boxes is a finite and explicit integer.
Creating an array like this:
final int[] myArray = new int[5]
creates a row of 5 boxes, each holding an int. Each of the boxes has an index, a position in the series of boxes. This index starts at 0 and ends at N-1, where N is the size of the array (the number of boxes).
To retrieve one of the values from this series of boxes, you can refer to it through its index, like this:
myArray[3]
Which will give you the value of the 4th box in the series (since the first box has an index of 0).
An ArrayIndexOutOfBoundsException is caused by trying to retrieve a "box" that does not exist, by passing an index that is higher than the index of the last "box", or negative.
With my running example, these code snippets would produce such an exception:
myArray[5] //tries to retrieve the 6th "box" when there is only 5
myArray[-1] //just makes no sense
myArray[1337] //way to high
How to avoid ArrayIndexOutOfBoundsException
In order to prevent ArrayIndexOutOfBoundsException, there are some key points to consider:
Looping
When looping through an array, always make sure that the index you are retrieving is strictly smaller than the length of the array (the number of boxes). For instance:
for (int i = 0; i < myArray.length; i++) {
Notice the <, never mix a = in there..
You might want to be tempted to do something like this:
for (int i = 1; i <= myArray.length; i++) {
final int someint = myArray[i - 1]
Just don't. Stick to the one above (if you need to use the index) and it will save you a lot of pain.
Where possible, use foreach:
for (int value : myArray) {
This way you won't have to think about indexes at all.
When looping, whatever you do, NEVER change the value of the loop iterator (here: i). The only place this should change value is to keep the loop going. Changing it otherwise is just risking an exception, and is in most cases not necessary.
Retrieval/update
When retrieving an arbitrary element of the array, always check that it is a valid index against the length of the array:
public Integer getArrayElement(final int index) {
if (index < 0 || index >= myArray.length) {
return null; //although I would much prefer an actual exception being thrown when this happens.
}
return myArray[index];
}
To avoid an array index out-of-bounds exception, one should use the enhanced-for statement where and when they can.
The primary motivation (and use case) is when you are iterating and you do not require any complicated iteration steps. You would not be able to use an enhanced-for to move backwards in an array or only iterate on every other element.
You're guaranteed not to run out of elements to iterate over when doing this, and your [corrected] example is easily converted over.
The code below:
String[] name = {"tom", "dick", "harry"};
for(int i = 0; i< name.length; i++) {
System.out.print(name[i] + "\n");
}
...is equivalent to this:
String[] name = {"tom", "dick", "harry"};
for(String firstName : name) {
System.out.println(firstName + "\n");
}
In your code you have accessed the elements from index 0 to the length of the string array. name.length gives the number of string objects in your array of string objects i.e. 3, but you can access only up to index 2 name[2],
because the array can be accessed from index 0 to name.length - 1 where you get name.length number of objects.
Even while using a for loop you have started with index zero and you should end with name.length - 1. In an array a[n] you can access form a[0] to a[n-1].
For example:
String[] a={"str1", "str2", "str3" ..., "strn"};
for(int i=0; i<a.length(); i++)
System.out.println(a[i]);
In your case:
String[] name = {"tom", "dick", "harry"};
for(int i = 0; i<=name.length; i++) {
System.out.print(name[i] +'\n');
}
For your given array the length of the array is 3(i.e. name.length = 3). But as it stores element starting from index 0, it has max index 2.
So, instead of 'i**<=name.length' you should write 'i<**name.length' to avoid 'ArrayIndexOutOfBoundsException'.
So much for this simple question, but I just wanted to highlight a new feature in Java which will avoid all confusions around indexing in arrays even for beginners. Java-8 has abstracted the task of iterating for you.
int[] array = new int[5];
//If you need just the items
Arrays.stream(array).forEach(item -> { println(item); });
//If you need the index as well
IntStream.range(0, array.length).forEach(index -> { println(array[index]); })
What's the benefit? Well, one thing is the readability like English. Second, you need not worry about the ArrayIndexOutOfBoundsException
The most common case I've seen for seemingly mysterious ArrayIndexOutOfBoundsExceptions, i.e. apparently not caused by your own array handling code, is the concurrent use of SimpleDateFormat. Particularly in a servlet or controller:
public class MyController {
SimpleDateFormat dateFormat = new SimpleDateFormat("MM/dd/yyyy");
public void handleRequest(ServletRequest req, ServletResponse res) {
Date date = dateFormat.parse(req.getParameter("date"));
}
}
If two threads enter the SimplateDateFormat.parse() method together you will likely see an ArrayIndexOutOfBoundsException. Note the synchronization section of the class javadoc for SimpleDateFormat.
Make sure there is no place in your code that are accessing thread unsafe classes like SimpleDateFormat in a concurrent manner like in a servlet or controller. Check all instance variables of your servlets and controllers for likely suspects.
You are getting ArrayIndexOutOfBoundsException due to i<=name.length part. name.length return the length of the string name, which is 3. Hence when you try to access name[3], it's illegal and throws an exception.
Resolved code:
String[] name = {"tom", "dick", "harry"};
for(int i = 0; i < name.length; i++) { //use < insteadof <=
System.out.print(name[i] +'\n');
}
It's defined in the Java language specification:
The public final field length, which contains the number of components
of the array. length may be positive or zero.
That's how this type of exception looks when thrown in Eclipse. The number in red signifies the index you tried to access. So the code would look like this:
myArray[5]
The error is thrown when you try to access an index which doesn't exist in that array. If an array has a length of 3,
int[] intArray = new int[3];
then the only valid indexes are:
intArray[0]
intArray[1]
intArray[2]
If an array has a length of 1,
int[] intArray = new int[1];
then the only valid index is:
intArray[0]
Any integer equal to the length of the array, or bigger than it: is out of bounds.
Any integer less than 0: is out of bounds;
P.S.: If you look to have a better understanding of arrays and do some practical exercises, there's a video here: tutorial on arrays in Java
For multidimensional arrays, it can be tricky to make sure you access the length property of the right dimension. Take the following code for example:
int [][][] a = new int [2][3][4];
for(int i = 0; i < a.length; i++){
for(int j = 0; j < a[i].length; j++){
for(int k = 0; k < a[j].length; k++){
System.out.print(a[i][j][k]);
}
System.out.println();
}
System.out.println();
}
Each dimension has a different length, so the subtle bug is that the middle and inner loops use the length property of the same dimension (because a[i].length is the same as a[j].length).
Instead, the inner loop should use a[i][j].length (or a[0][0].length, for simplicity).
For any array of length n, elements of the array will have an index from 0 to n-1.
If your program is trying to access any element (or memory) having array index greater than n-1, then Java will throw ArrayIndexOutOfBoundsException
So here are two solutions that we can use in a program
Maintaining count:
for(int count = 0; count < array.length; count++) {
System.out.println(array[count]);
}
Or some other looping statement like
int count = 0;
while(count < array.length) {
System.out.println(array[count]);
count++;
}
A better way go with a for each loop, in this method a programmer has no need to bother about the number of elements in the array.
for(String str : array) {
System.out.println(str);
}
ArrayIndexOutOfBoundsException whenever this exception is coming it mean you are trying to use an index of array which is out of its bounds or in lay man terms you are requesting more than than you have initialised.
To prevent this always make sure that you are not requesting a index which is not present in array i.e. if array length is 10 then your index must range between 0 to 9
ArrayIndexOutOfBounds means you are trying to index a position within an array that is not allocated.
In this case:
String[] name = { "tom", "dick", "harry" };
for (int i = 0; i <= name.length; i++) {
System.out.println(name[i]);
}
name.length is 3 since the array has been defined with 3 String objects.
When accessing the contents of an array, position starts from 0. Since there are 3 items, it would mean name[0]="tom", name[1]="dick" and name[2]="harry
When you loop, since i can be less than or equal to name.length, you are trying to access name[3] which is not available.
To get around this...
In your for loop, you can do i < name.length. This would prevent looping to name[3] and would instead stop at name[2]
for(int i = 0; i<name.length; i++)
Use a for each loop
String[] name = { "tom", "dick", "harry" };
for(String n : name) {
System.out.println(n);
}
Use list.forEach(Consumer action) (requires Java8)
String[] name = { "tom", "dick", "harry" };
Arrays.asList(name).forEach(System.out::println);
Convert array to stream - this is a good option if you want to perform additional 'operations' to your array e.g. filter, transform the text, convert to a map etc (requires Java8)
String[] name = { "tom", "dick", "harry" };
--- Arrays.asList(name).stream().forEach(System.out::println);
--- Stream.of(name).forEach(System.out::println);
ArrayIndexOutOfBoundsException means that you are trying to access an index of the array that does not exist or out of the bound of this array. Array indexes start from 0 and end at length - 1.
In your case
for(int i = 0; i<=name.length; i++) {
System.out.print(name[i] +'\n'); // i goes from 0 to length, Not correct
}
ArrayIndexOutOfBoundsException happens when you are trying to access
the name.length indexed element which does not exist (array index ends at length -1). just replacing <= with < would solve this problem.
for(int i = 0; i < name.length; i++) {
System.out.print(name[i] +'\n'); // i goes from 0 to length - 1, Correct
}
According to your Code :
String[] name = {"tom", "dick", "harry"};
for(int i = 0; i<=name.length; i++) {
System.out.print(name[i] +'\n');
}
If You check
System.out.print(name.length);
you will get 3;
that mean your name length is 3
your loop is running from 0 to 3
which should be running either "0 to 2" or "1 to 3"
Answer
String[] name = {"tom", "dick", "harry"};
for(int i = 0; i<name.length; i++) {
System.out.print(name[i] +'\n');
}
Each item in an array is called an element, and each element is accessed by its numerical index. As shown in the preceding illustration, numbering begins with 0. The 9th element, for example, would therefore be accessed at index 8.
IndexOutOfBoundsException is thrown to indicate that an index of some sort (such as to an array, to a string, or to a vector) is out of range.
Any array X, can be accessed from [0 to (X.length - 1)]
I see all the answers here explaining how to work with arrays and how to avoid the index out of bounds exceptions. I personally avoid arrays at all costs. I use the Collections classes, which avoids all the silliness of having to deal with array indices entirely. The looping constructs work beautifully with collections supporting code that is both easier to write, understand and maintain.
If you use an array's length to control iteration of a for loop, always remember that the index of the first item in an array is 0. So the index of the last element in an array is one less than the array's length.
ArrayIndexOutOfBoundsException name itself explains that If you trying to access the value at the index which is out of the scope of Array size then such kind of exception occur.
In your case, You can just remove equal sign from your for loop.
for(int i = 0; i<name.length; i++)
The better option is to iterate an array:
for(String i : name )
System.out.println(i);
This error is occurs at runs loop overlimit times.Let's consider simple example like this,
class demo{
public static void main(String a[]){
int[] numberArray={4,8,2,3,89,5};
int i;
for(i=0;i<numberArray.length;i++){
System.out.print(numberArray[i+1]+" ");
}
}
At first, I have initialized an array as 'numberArray'. then , some array elements are printed using for loop. When loop is running 'i' time , print the (numberArray[i+1] element..(when i value is 1, numberArray[i+1] element is printed.)..Suppose that, when i=(numberArray.length-2), last element of array is printed..When 'i' value goes to (numberArray.length-1) , no value for printing..In that point , 'ArrayIndexOutOfBoundsException' is occur.I hope to you could get idea.thank you !
You can use Optional in functional style to avoid NullPointerException and ArrayIndexOutOfBoundsException :
String[] array = new String[]{"aaa", null, "ccc"};
for (int i = 0; i < 4; i++) {
String result = Optional.ofNullable(array.length > i ? array[i] : null)
.map(x -> x.toUpperCase()) //some operation here
.orElse("NO_DATA");
System.out.println(result);
}
Output:
AAA
NO_DATA
CCC
NO_DATA
In most of the programming language indexes is start from 0.So you must have to write i<names.length or i<=names.length-1 instead of i<=names.length.
You could not iterate or store more data than the length of your array. In this case you could do like this:
for (int i = 0; i <= name.length - 1; i++) {
// ....
}
Or this:
for (int i = 0; i < name.length; i++) {
// ...
}
This question already has answers here:
Removing from array during enumeration in Swift?
(9 answers)
Closed 6 years ago.
In this loop we have the potential to reduce the number of items in the loop while processing it. This code works fine in Obj-C, but the Swift loops don't get the message that an item has been removed and end up overflowing the array.
In Objective-C, we had:
for(int i = 4; i < staticBlocks.count; i++)
{
PlayerSprite* spr = [staticBlocks objectAtIndex:i];
[spr setPosition:CGPointMake(spr.position.x, spr.position.y-1)];
if(spr.position.y < -1000)
{
[staticBlocks removeObject:spr];
[spr removeFromParent];
}
if(spr.blockTypeIndex == Block_Type_Power_Up)
{
[spr update];
}
}
In Swift I know of these options:
//for i in 4.stride(to: staticBlocks.count, by: 1){ //crashes
//for i in 4..<staticBlocks.count{ //crashes
for var i = 4; i < staticBlocks.count; i += 1 { //works, but is deprecated
let spr = staticBlocks.objectAtIndex(i) as! PlayerSprite
spr.position = CGPointMake(spr.position.x, spr.position.y-1)
if(spr.position.y < -1000)
{
staticBlocks.removeObject(spr)
spr.removeFromParent()
//break
}
if(spr.blockTypeIndex == k.BlockType.PowerUp)
{
spr.update()
}
}
In this specific case, it really isn't a problem for me to use a break statement (which is currently commented out) to kill the loop and prevent the crash, but it doesn't seem like the proper fix. I assume there will come a time when I need to know how do do this correctly. Is there a non deprecated way to do a for loop, one which processes the count each pass?
A related, unanswered question.
Is the for loop condition evalutaed each loop in swift?
I don't know how to link to a specific answer, but this code did what I needed. Marking as duplicate now.
Removing from array during enumeration in Swift?
var a = [1,2,3,4,5,6]
for (i,num) in a.enumerate().reverse() {
a.removeAtIndex(i)
}
This is because in Swift you cannot remove items from an array while you are iterating over it.
From this question Removing from array during enumeration in Swift?
you can see that you should be using the filter function instead of using a for loop.
For example, don't do this:
for (index, aString: String) in enumerate(array) {
//Some of the strings...
array.removeAtIndex(index)
}
Do something like this:
var theStrings = ["foo", "bar", "zxy"]
// Filter only strings that begins with "b"
theStrings = theStrings.filter { $0.hasPrefix("b") }
(Code example from this answer)
Additionally, it should be noted that filter won't update the array, it will return a new one. You can set your array to be equal to that array afterwards.
An additional way to solve the issue, from the same question is to do this:
var a = [1,2,3,4,5,6]
for (i,num) in a.enumerate().reverse() {
a.removeAtIndex(i)
}
print(a)
This question already has answers here:
What is an IndexOutOfRangeException / ArgumentOutOfRangeException and how do I fix it?
(5 answers)
Closed 7 years ago.
I'm getting one of the following errors:
"Index was out of range. Must be non-negative and less than the size of the collection"
"Insertion index was out of range. Must be non-negative and less than or equal to size."
"Index was outside the bounds of the array."
What does it mean, and how do I fix it?
See Also
IndexOutOfRangeException
ArgumentOutOfRangeException
Why does this error occur?
Because you tried to access an element in a collection, using a numeric index that exceeds the collection's boundaries.
The first element in a collection is generally located at index 0. The last element is at index n-1, where n is the Size of the collection (the number of elements it contains). If you attempt to use a negative number as an index, or a number that is larger than Size-1, you're going to get an error.
How indexing arrays works
When you declare an array like this:
var array = new int[6]
The first and last elements in the array are
var firstElement = array[0];
var lastElement = array[5];
So when you write:
var element = array[5];
you are retrieving the sixth element in the array, not the fifth one.
Typically, you would loop over an array like this:
for (int index = 0; index < array.Length; index++)
{
Console.WriteLine(array[index]);
}
This works, because the loop starts at zero, and ends at Length-1 because index is no longer less than Length.
This, however, will throw an exception:
for (int index = 0; index <= array.Length; index++)
{
Console.WriteLine(array[index]);
}
Notice the <= there? index will now be out of range in the last loop iteration, because the loop thinks that Length is a valid index, but it is not.
How other collections work
Lists work the same way, except that you generally use Count instead of Length. They still start at zero, and end at Count - 1.
for (int index = 0; i < list.Count; index++)
{
Console.WriteLine(list[index]);
}
However, you can also iterate through a list using foreach, avoiding the whole problem of indexing entirely:
foreach (var element in list)
{
Console.WriteLine(element.ToString());
}
You cannot index an element that hasn't been added to a collection yet.
var list = new List<string>();
list.Add("Zero");
list.Add("One");
list.Add("Two");
Console.WriteLine(list[3]); // Throws exception.