Normally when I used to type in my VSCode editor, the intellisense showed all the possible suggestions for the entered query.
However, now as I type, only one suggestion is shown that best matches the query.
For instance, when I type in b, the intellisense just shows a suggestion for the HTML <b> element — not a list of suggestions including tags such as <button>.
Is there any way to change this? I have searched a lot of the net but couldn't find any sort of help.
VS Code 1.51 made the list of suggestions resizable so it's possible your suggest widget is simply shrunken down to be a single line high.
To fix this, trigger suggestions and then click and drag at the bottom edge of the suggest widget to increase the number of visible suggestions.
Note that you can always use the arrow keys to navigate through suggestions, even if only one suggestion is visible. Use this to check if the widget is simply too small or if there really is only one suggestion
I wasted time on this too... (bummed)
Solution:
Open: Command Palette
Type: ">Reset Suggest Widget Size"
Select: 'click' or [ENTER]
Opinion:
Wish I saw Matt Bierner's answer sooner.
(The suggestion window can be resized by dragging its borders with your cursor.)
Related
I have searched google/stackoverflow etc. for answer to my question, but I didn't quite manage to find the right one. I believe I just don't know, how to set the question properly, and thus I cannot find solution.
Is there any way, how to create grid like I drawed in following image (with red colour):
I need to add this red grid to several images, which look very simmilar. The grid field (the one selected) have rolling menu, prescribed position, and a field for additional text. Black lines in background are image in background, and the red supposed to be grid above the image. I thought of creating a lot of buttons alined to each other, but i think that is very bad way to do so.
I would like a pop-up menu from selected field, but opening new activity with same fields is usable aswell. Is there any "simple" solution for creating such grid/menu ?
Btw, I am not programmer with many experience with coding, let's say, I know basics only.
Thanks in advance.
I really like how IntelliJ displays the information of the type of parameters that you are required to fill in as you are writing the code. The problem is that this info sometimes disappears if u click somewhere to check something etc. I never quite know how to get it to display that information again in same fashion. So I always spend some time to fiddle around until it displays that info again in the same fashion. I know you can hold down on ctrl and hover over the method name to bring up parameters information but its not quite the same and it then does not highlight on what parameter you are currently on. IntelliJ also brings up required parameters type of information when you are starting to go wrong. It brings up this big separate box and you can get very clear view of what needs to be done. I've taken a screenshot of the type of information that I'm on about. Both of them are on the same pic.
Please check it out.
My question: is there a way to bring this information up via keystrokes or mouse input at will? I've tried to google for an answer but I haven't had any joy. Please advise as I'm sure someone else might like this information too.
Thank you.
PS. I know that a good code does not usually have that many parameters but in my case there is not much that can be done.
Default shortcut for that is CTRL-P when cursor is inside the brackets.
I'm using Dymola but I expect OpenModelica might very well be the same (or at least similar).
For a given component model sometimes it makes more sense to have lots of parameters shown on one "tab" of the parameter GUI. This can lead to an excessively long GUI which, for many reasons including for psychological reasons in relation to how humans process information, is not a appropriate solution.
To solve this I would like to add a vertical scroll bar on the parameter GUI. I believe I saw it once though I cannot recall exactly where.
For illustrative purposes look to the right side of your web browser window. That gray bar that goes up and down is the scrollbar :). I know, obvious but you never know.
I assume I need to put some command in an annotation somewhere though where and what command I am not sure. For example, I found some reference to a verticalScrollBarPolicy but alas, I can not find any documentation on this.
Anyone know how to do this?
EDIT #1:
Dymola (and Adrian indicated OpenModelica as well) will automatically create the scroll bar when the GUI gets larger than the screen. Unfortunately (at least in Dymola) there is little margin so if you GUI is a fraction smaller than the window the "OK" button will be covered by the ribbon on the bottom of the screen and the GUI will be needed to made slightly larger to make the scroll bar appear automatically. This is a reason why a manual option for a scrollbar would come in handy.
I think additional "tabs" might help?
As far as I know in OpenModelica we have a scroll bar for that dialog windows if the window would expand out of the screen.
As of this posting my understanding based on feedback on this forum, my own experience, and from additional discussions with others there is no current manual control of the GUI (i.e., size, scrollbars, etc.).
Your best bet if you come across issues (e.g., you have a super small 2nd monitor) is to use lots of tabs and keep descriptions very short (which is probably appropriate for most applications anyways).
This is a Dymola and OpenModelica issue not a modelica issue as it is not contained in the modelica specification (as I understand it).
If this changes and I find out about it I'll remove or update this post.
Essentially I want to re-size my dateTimePicker control to fit its parent container. I have tried to do this both through the Control Editor and programmatically but I simply cannot get the drop down calendar to expand at all. So 2 part question:
a) Is this even possible to do?
b) Is there an easy-to-implement solution to having a good looking calendar that fits its parent field? (i.e. using a data grid or something similar)
Any help or knowledge is greatly appreciated!!!
The size of both objects is fixed and defined by the size of its font. Thus you might change its size by affecting the font size. This works fine with DateTimePicker but does not seem to work with MonthCalendar. After a quick research I have found a pretty curious recommendation on the MSDN forum: "you can consider third party MonthCalendar controls to meet your requirement temporarily".
There are quite a few third-party options (after a really quick search I found this) or you might even create one by your own. I personally haven't ever had any problem with the in-built controls but if the size is so important for you I guess that you would have to search/develop something by your own.
Further recommendation: rely on WPF which does contain a resizable control (DatePicker). I want to highlight here that I don't like WPF at all and that thus this recommendation is because I don't see any other option (inside .NET).
Couldn't find it anywhere (google or stackoverflow).
Is there a way to force Dump()'s output to be automatically collapsed?
Update:
Some more info, to bring more focus to the question.
As mentioned below Collapsing can be done after the output as rendered via keyboard shortcust (Alt+1, Alt+2, Alt+3)
And can rendering depth can be determined by passing an int depth param, but that does not allow to expand the results.
Is there some way to change the CSS formatting? I'm not that fluent in CSS, so this might be the solution.
Why I need this:
What I want is to make the output 'cleaner', and dive in when something of interest show's up.
I'm running a query repeatedly, and don't need all of the output all the time, but still using my human abilities to detect change, instead of coding the detection.
Update: November 2013
As Joe (the author himself!) mentions in the comments, LINQPad no longer has the limitation described.
It is now possible to state 0 and collapse the information after it's rendered.
No, although you can call Dump with a number to force it to display to that nesting depth:
.Dump(0)
You can also use the formatting shortcuts (Alt+1, Alt+2, Alt+3) to collapse the whole display to one, two or three levels.
Another option is to dump to grids. Call Dump(true) or use the toolbar button. Grids show only one level and subsequent levels are shown upon demand with hyperlinks.