I have created A userform with few command buttons.
I can't seem to figure out how do I get the information from them.
I want to open this userform from another one and then I want the user to choose an option from one of the buttons which will change a specific cell in the table itself
the userform I created
I did not write anything on this userform therefor there is no code from it to show only the design.
how do get the information from the buttons to be written in A specific cell on a specific worksheet?
double click on one of the buttons, in the code menu a new sub should appear. this looks something like:
Sub CommandButton1_onClick()
End sub
Alongside this event method, it also has a few properties. The one that is usefull here is the CommandButton1.Value, this represents the state of the button (either true or false iirc).
So build for each button (I strongly advice giving them custom names to prevent getting lost in the trouble) as sub like this:
Sub CommandButton1_onClick()
if CommandButton1.Value then
ThisWorkBook.WorkSheets("WorksheetName").Range("YourRange").Value = "Some value"
else
ThisWorkBook.WorkSheets("WorksheetName").Range("YourRange").Value = ""
end if
End sub
Related
I have some very (very) basic MS Access knowledge. I'm trying to expand a bit into either VBA or macros as I'd like to put in some conditional visibility for my form. Basically, I have a checkbox. If it's checked, I want three or four more fields to pop up. Someone was able to point me to a basic VBA formula of if (this checkbox) = true then, (fieldx).visible = true, else, (fieldx).visibility = false, end if.
But I'm so new to this that I need more help and explanation. I tried putting it in but couldn't get it to work (no error message, just nothing changed at all).
Specific questions:
-Does this formula seem right?
-If I want multiple fields to be visible, can I combine them into one formula or should I create a new "if" statement for all?
-Where do I enter this code? I'm running the Office 365 version. For all I know, I'm not even putting it in the right place.
-How do I determine the field names to replace the (this checkbox) and (fieldx) in the formula? I tried entering the name I title the fields as, but with the spaces in the name I got an error message, and without the spaces nothing happened. Is there a specific naming convention to turn the field names into formula-appropriate titles? Is the name listed somewhere?
-Once I get the formula entered, is there something I have to do to get it to run/take effect? I tried saving, closing and reopening with no changes.
-Is this the best way to go about this?
If there's anything else you think I should know, I would love to hear it - but please keep in mind I'm very new to this so if you could keep it at "dummy" or ELI5 levels of explanation, I'd appreciate it!
after creating a form with 4 textboxes and a checkbox put the form in design mode (lower right corner has design mode selected, select a textbox and hit property sheet on the ribbon (or f4).
On the property sheet note the visible property. set the visible property to false. Now the textbox will be invisible when the form starts.
Tip you can select all the textboxes at the same time and set their properties all at once.
Every control on the form and even the various parts of the form have properties you can set and play with. For instance you can give any name you want to any control. On the property sheet go to the other tab and set the name property.
Tip: choose a name you you will remember without having to look it up and describes the controls function.
Next select the checkbox (not the checkbox's label). On the property sheet go to the event tab and select the on click event. hit the ellipsis and choose code builder. Access is Event Driven. We want the textboxes to appear when the checkbox is selected so we put that code in the checkbox click event.
after choosing code builder we get the code window where we can browse among all the events for all our forms. for now all you should see is something like:
Private Sub mycheckbox_Click()
End Sub
So insert some code to handle the checkboxes like:
Private Sub mycheckbox_Click()
If mycheckbox = True Then
txtbox1.Visible = True
txtbox2.Visible = True
txtbox3.Visible = True
txtbox4.Visible = True
Else
txtbox1.Visible = False
txtbox2.Visible = False
txtbox3.Visible = False
txtbox4.Visible = False
End If
End Sub
now when the checkbox is not checked no textboxes are visible.
but when the checkbox is checked they appear
I have a Form Control with ActiveX Radio/Option Buttons in it.
The Form Control name is Side and contains Option/Radio Buttons with names xOption, oOption, and randomSide.
How would I be able to create a Macro that would allow me to set the radio buttons to a certain value upon opening the workBook. Recording a Macro of me clicking options results in a blank Macro. I've Already tried:
ActiveSheet.Shapes.Range(Array("Side")).Select
ActiveSheet.Shapes.Range("xOption").OLEFormat.Object.Value = 1
But this gives me error 1004 and other codes give me error 91. I'm really new to VBA so if I look stupid you know why.
Try something like this, using Worksheets instead of ActiveSheet:
Private Sub Workbook_Open()
Worksheets("your sheet name here").OLEObjects("xOption").Object.Value = 1
End Sub
As you want it to be selected after opening the sheet. Place this on ThisWorkbook.
You may try something like this...
ActiveSheet.OLEObjects("xOption").Object.Value = 1
I'm trying to add options to a combo box in a userform. When I run the code, Excel doesn't give any errors, however when the userform shows up it doesn't display the entities I have added to the combobox previously. That is, when I click on the combobox, it doesn't show any options, only one blank row, as if no items were added to it.
Here is the code I'm using:
Private Sub UserForm_Initialize()
ComboBox1.AddItem "xxx"
ComboBox1.AddItem "yyy"
ComboBox1.AddItem "zzz"
End Sub
I am using the following code to call the user form within a macro:
UserForm.Show
The code given in the question works perfectly well. In my case the code didn't work because I manually entered this part of the code into VBA:
Private Sub UserForm_Initialize()
If you make Excel create this module for you instead of writing it on your own, your code should work perfectly. Excel did not have "Initialize" as a default form so I tried "Activate" and it worked.
To create this module you have to do the following steps:
Right click on user form
Click on view code
On top you will see two categories you can pick, you should pick "Userform" and "Activate", after completing this step excel must add a new module to your code.
In this module you may code everything you want about the content of the combobox.
You should also be careful with the spelling of your combobox, if you spell it incorrectly, you may be unable to see the contents of the combobox.
Ensure that the code segment you have posted is in the userform.
Right click on the user form in the VBA view and choose "View Code". Is this where the code is?
Are you sure that the User Form is called 'UserForm' and not 'UserForm1'? 'UserForm1' is the default, similar to 'ComboBox1'.
The below works for me.
'in the UserForm1 code
Private Sub UserForm_Initialize()
ComboBox1.AddItem "xxx"
ComboBox1.AddItem "yyy"
ComboBox1.AddItem "zzz"
End Sub
The below will display the form.
UserForm1.Show
Is this the only form in the workbook? Create a new one and see if it does the same thing.
Same problem here, but I solved setting ColumnWidths property to -1 (it was set to 0).
Longtime viewer, first time question asker.
I'm currently working with UserForms within MS Word and have a particular form that can have up to 20 different labels and accompanying textboxes with varying texts. I have all but the first hidden while not in use, however I would like the next label and text box to become visible following input in the previous textbox. So if you enter data (anything) in the first textbox, the next label and text box will become visible. Does this make sense? I've seen other responses here suggest using AfterUpdate() rather than Change() or Click() but can't figure out how to use any of them. I would share my code but at this point I don't have any code to share, other than my labels and textboxes are lblField1 txtField1, lblField2 txtField2...
Any suggestions?
I would suggest using Change event, when using AfterUpdate you need to leave you TextBox for a while to fire the event. If you have only one TextBox visible there is nothing to move to. If you have more TextBoxes you would need to move back to fire AfterEvent and I don't think this is what you expect.
So, double click wherever on your userform and add the following code in code area:
Private Sub txtField1_Change()
txtField2.Visible = True
lblField2.Visible = True
End Sub
Next, add next portion for next textbox:
Private Sub txtField2_Change()
txtField3.Visible = True
lblField3.Visible = True
End Sub
And so on, if only you have an order in controls name you just need to change numbers in the end of control names.
What I am trying to achieve is for a combo box (Combo_sf) selection to dictate the form in the subform control (sf_record) I have about 10 forms, their names are in the combo box data. I am new to VBA and am not sure if my approach is right:
Private Sub Combo_sf_AfterUpdate()
Dim strLoadTable As String
strLoadTable = "Form." & Me.Combo_sf.Value
MsgBox strLoadTable
Forms![frm_Mnu_Manage Configuration Settings]!sf_record.Form.SourceObject = strLoadTable
End Sub
I have placed this in the combobox's after update event but when I make my selection nothing happens in the form. Am I approaching this right or would another way work better?
Your approach should work. I put a combo box named cbxSubform on my main form and added one line of code to its AfterUpdate() event handler...
Private Sub cbxSubform_AfterUpdate()
Me.mySubform.SourceObject = Me.cbxSubform.Value
End Sub
...and changing the selection in the combo box switches the subforms immediately. Are you sure that the AfterUpdate() code for your combo box is actually firing? (You could add a MsgBox or a Debug.Print to check.)
It could be this line which is tripping you up:
strLoadTable = "Form." & Me.Combo_sf.Value
What is your form object called? If your form is called Form.myTableName it could be the . that is throwing it out, try setting it to a form without a dot in its name.
In this line, it seems the code attempts to change the SourceObject property of a Form object.
Forms![frm_Mnu_Manage Configuration Settings]!sf_record.Form.SourceObject = strLoadTable
However, SourceObject is a property of a subform control, not the form contained in that control. So if the subform control is named sf_record, do it this way.
Forms![frm_Mnu_Manage Configuration Settings]!sf_record.SourceObject = strLoadTable
Also, if the after update procedure runs from [frm_Mnu_Manage Configuration Settings], you can use Me to refer to the form.
Me!sf_record.SourceObject = strLoadTable
Finally, if Me.Combo_sf.Value is the name of a form, you don't need to prefix its name with "Form.". It worked either way in my test, but I would just leave off "Form.".
strLoadTable = Me.Combo_sf.Value