I'm trying to automate a workflow using Google Data Studio. Requirements are simple - I need to be able to programatically copy a templated report (from a Python/Java application) and import/set a data source (Google Sheets doc) for that report. Nothing more fancy (no visualisation creation, formatting, or anything graphical, etc.).
Sources here, here and here (last two require Google Cloud Console account) suggest an API does exist (and detail a setup process to access it). However, after going through this setup process, I can find no details or documentation of any functionality, and consequently have been unable to progress.
Can anyone authoritatively state whether:
1. There does exist any API functionality for GDS? and
2. If not, are there plans to develop such? (since the Google links above suggest there is, I'm wondering if this means it's in the pipeline for near future).
The only directly related SO posts I can find are here and here. The first suggests there isn't, but doesn't account for the Google links I've provided above which suggest there is; the second doesn't really cover the same use case, so doesn't provide answers applicable here.
FYI - I've posted a Google Community forum post here asking essentially the same question.
If anyone is able to help out, that would be greatly appreciated :) Many thanks in advance for your time and help! :)
Fresh as of 2022-05-23
There does exist any API functionality for GDS?
Not in the way you are expecting. The three links you posted all refer to the current Data Studio API. The only things you can do with that API is view your Data Studio assets and update permissions. That's it. This API won't let you create/copy/modify reports or data sources.
If not, are there plans to develop such?
Not in the near future. You can make/vote for this feature request in the official tracker. More popular feature requests are usually prioritized in roadmaps.
That being said, a lot of the API use cases can be resolved using combinations of Community Connectors, config parameters, direct linking, viewer's credentials, Linking/Integration API etc.
Related
Under the email collaboration in Defender365, there are a set of reports that report things such as malware detected in emails, spam blocks, etc... that I'd like to pull that aren't available on the two APIs https://api.security.microsoft.com/api/incidents or https://api.security.microsoft.com/api/alerts.
Is anyone aware of an API with which I can pull this raw data so that I can use it in my already existing data visualization tools? Much appreciated,.
I tried using the existing APIs but they didn't come back with the intended results and the documentation doesn't seem to point to where one can find this.
You may find something here:
https://learn.microsoft.com/en-us/microsoft-365/security/defender-endpoint/management-apis?view=o365-worldwide
Although I will say that after a quick skim, it doesn't seem that Microsoft exposes that data. Microsoft documentation surrounding this API also seems to be lacking. They will hopefully update it in the next few months as they feel the squeeze from their customers as they deprecate other modules/APIs.
This is my first post/question. If I missed an existing thread that answers my question, I missed that thread in my search and definitely appreciate you linking me! Please let me know if I should be posting/asking this elsewhere....
My question relates to Salesforce.
I have a use case where a client has a monthly batch of files that need to be made available on various cloud-based storage/distribution platforms like Box and Dropbox but also other less ubiquitous tools specific to the sector. Currently, the client is logging into each distribution platform, one-at-a-time, and uploading the files; then, if at any point any files need to be updated or removed/restricted, the client logs into each platform one-by-one and takes the necessary action. Obviously the process being described is tedious/laborious and leaves multiple gaps for error. The client and I are discussing a solution that would allow for create/read/update/delete actions in all of the distribution platforms without having to leave their Salesforce org. I am aware of existing AppExchange integrations for Box, Dropbox, etc. but they don’t quite do everything we need (to my knowledge)—they tie-in nicely and there are use cases where they are powerful tools...but—my understanding of those existing integration is that they would still each require dedicated tabs within the Object and repeated ‘drags’ and ‘drops’ of the same files to each tab. Again, the end goal here is that, for example, the client wants to drag and drop one time and have it pushed to the various platforms, etc. Or another example is they would like to choose "delete" one time from within Salesforce and have the file removed/restricted on all distribution platforms.
I am a certified SF Admin 1, so...perhaps this should be in my wheelhouse but...I feel unsure how to approach. My feeling is this is asking for a combination of integrations via API and Process/Flow work, but I am hoping for some ideas/input/guidance. Any insight or help any of you have to offer would be so greatly appreciated!!
Thanks so much!
Has anyone ever tried to integrate QlikView BI application with SimPro business management software? If so, would be interested to know if you were successful and if so how?!!
Dorey.
Jonathan from simPRO here.
I'm not aware of any clients that have an integration with QlikView but it is a well respected reporting platform with a myriad of ways to extract data from other systems.
A quick scout around their documentation tells me that the easiest option for integration would using their QVSource API connector.
Details are here: http://www.qvsource.com/Connectors-For-QlikView/General-JSON-XML-SOAP-Web-API-Connector-For-QlikView
For simPROs API you would use this in "POST" methodology - ie: supplying the post data as per our API docs at: http://api.simpro.co . Our API uses OAuth authentication and there is dome detail and examples on using that with QVsource at: http://wiki.qvsource.com/General-Web-Connector-For-QlikView.ashx
Whilst we may not be able assist technically with setting up the QlikView system our technical support department can assist with any queries you have in regards to our API calls etc...
Hope that is of some help!
I am going to try and respond to your dilemma, while being a QV expert for the last 8 years I am not too familiar with simpro, however I did quickly browse through their API docs here -> http://api.simpro.co/
I have noticed that they support 3 formats, namely soap, json and xml. For qlikview you would choose xml. I have also noticed that they support 2 authentication methods namely basic auth and O Auth. IN this scenario you would be using basic auth (so you can pass a username and password via the url) as this will also work perfectly with Qlikview.
In your Edit Script, you will notice a "Data from files"-> Web Files, then in the popup you can enter the url from where you would retrieve your information from.
Note you need to pass format=xml to the url, along with your basic auth username and password to the relevant url (which you will find in simpro's docs), for any other format you will need QVSource which has a fee attached.
I hope this has pointed you in the right direction.
I'm not a developer but an internet marketer - so forgive me for what is I'm sure a very basic question. In my career, it's useful when looking at website marketing to better understand what tools are used, such as Google Analytics for example. Most of the time this is quite simple - just view source and you'll see in the source code the javascript snippet.
I use the ghostery plugin to make this a bit easier, but what I don't understand about http requests is how ghostery reports a technology as being used, such as the ad server DoubleClick for example, but I can't see any code in the source code that references Doubleclick. This happens a lot but it's most often with ad server technologies.
When I look using Chrome Dev Tools, I do in fact see that the call was made by viewing the Source tab.
My question is this and it's really a general question where I'm trying to better understand how calls are made back and forth between the browser and all the various servers and services:
How, in Chrome Tools do I find what code made the call to load the resource, such as DoubleClick. I can't find anything in the source code, which tells me I don't fully understand how interactions are working.
I think from search StackOverflow that is is a xmlhttp call but I'm not sure about that, maybe it's cookies - I just don't know how this is working. At the end of the day, I don't like not understanding how this all works, so I'm hoping someone can point me in the write direction.
Thanks.
In the Network panel, find your request of interest. The Initiator column will contain a reference to the code that has initiated loading the associated resource.
I'm a student working on a project related to SEO; I need to write an optimization tool, so I'm writing an application using C# and Windows Forms. The main part of the application is for keyword selection, and I want to use the Google AdWords API to obtain a list of keywords.
I downloaded the C# client library, but can't understand how to set up the project: I am getting the error:
"An API exception has occurred. See ApiExecption and InnerException fields for more details".
Maybe I have made a mistake when I edited the App.config file as I haven't changed anything else. Can anyone advise me where I should begin? I would be grateful to hear your ideas.
Unfortunatley, the AdWords API isn't as open as you might think: It's meant for ad agencies managing large accounts, or software vendors who want to build ad management platforms. You need to apply to Google for an API key to gain access; they used to give them out to nearly anyone with an account, and it took about 14 days to process the application. However, Google has got very strict about their terms and conditions over the past 12 months, and to put it simply, you probably won't meet them if you're building an SEO tool; even if you apply to build a full platform, you'll need to wait six to ten weeks for approval as they've got a huge backlog of applications to process at the moment.
As this is just a student project, you should actually be able to get away with just using the AdWords API sandbox, which is open to anyone with a Google account. This won't give you real keywords or stats, but would demonstrate your understanding of the platform.
Another option would be to check out the Ad Intelligence Service of the adCenter API; you'd still need to open an adCenter account (with a $5 activation fee), but you should be able to get an adCenter API key without waiting too long. The stats available from Microsoft won't be as extensive as what Google has to offer, but will still be relevant to the at least the US market. Also, being Microsoft, they've got a good range of C# examples.
You could use the sandbox, but it is good only for testing purposes. You won't get real values for traffic estimation and keyword ideas.
To use the sandbox, what you need is a Google account (your gmail account for instance). To initialize the sandbox,
In your App.config, put email/password/developerToken as your email / your password / youremail++USD (e.g. john.doe#gmail.com++USD)
Run the GetCampaigns.cs code example. It is under v201109/BasicOperations folder in the C# examples project. This will initialize the sandbox.
Run the GetAccountHierarchy.cs code example. It is under v201109/AccountManagement folder. This will give you 5 client emails and their customer ids.
Use one of these customerIds in the ClientCustomerId field of App.config.
Run any other code example.
The video is a bit outdated, due to recent changes in AdWords API, I need to update it.
you can find a very good article series about adwords api there: Google Adwords API
it is not that hard to learn how to use it! I think the API itself is very good documented and there is a good suppo from google.