When calling vkQueuePresentKHR i get the following validation error:
Validation Error: [ VUID-vkMapMemory-size-00680 ] Object 0: handle = 0x8483000000000025, type = VK_OBJECT_TYPE_DEVICE_MEMORY; | MessageID = 0xff4787ab | VkMapMemory: Attempting to map memory range of size zero The Vulkan spec states: If size is not equal to VK_WHOLE_SIZE, size must be greater than 0 (https://vulkan.lunarg.com/doc/view/1.2.148.0/windows/1.2-extensions/vkspec.html#VUID-vkMapMemory-size-00680)
I never called vkMapMemory() directly.
Here is an excerpt of my code: https://gist.github.com/alexandru-cazacu/7847161564daa5f93d1bada39280faa8
Closing RivaTuner Statistics Server fixed the issue.
I had 3 other validation errors caused by it.
As stated in https://vulkan-tutorial.com/FAQ
I get an access violation error in the core validation layer: Make sure that MSI Afterburner / RivaTuner Statistics Server is not
running, because it has some compatibility problems with Vulkan.
Related
When calling a remote function on BigQuery, I get the following error The maximum total size of all input parameters is 5242880 bytes.. This error is undocumented (or my Googling ability is lacking). It is even more unexpected as the query that pop this error is as simple as it gets:
SELECT
`remote_function`( payload ) AS results
FROM
`source_table`
The error is definitely on BQ's side, as no error is observed on the cloud-function called.
How to proceed on such issue, I'm guessing I hitting some kind of limit related to remote functions, but which one?
Hello everyone and thanks for reading this problem.
I have a solution in C# using the zkemkeeper dll to get the records from some access control devices. When I "ping" them, there isn't any problem, but when I try to connect to them (Using my solution or the standalone demo to get attendance) I get the "-307" error with the "Unable to connect message". That's not very clear and I would really aprecciate if someone can explain what this error is (please!!!!). I would really like to understand these errors myself, so, where can I find all the definition of these errors?
In short:
1.- What is the problem regarding the "-307" error?
2.- Is there any place where all these errors are documented?
Thanks in advance!!
enter image description here
maybe you should check your device, you can ping them
Attention
The dwErrorCode parameter specifies the error code. The values are described as follows:
During connection, the following error codes may be returned:
0 Connected successfully
-1 Failed to invoke the interface
-2 Failed to initialize
-3 Failed to initialize parameters
-5 Data mode read error
-6 Wrong password
-7 Reply error
-8 Receive timeout
-307 Connection timeout
In invoking other interfaces, the following error codes may be returned:
-201 Device is busy
-199 New Mode
-103 device send back error of face version error
-102 face template version error, like 8.0 face template send to 7.0 device
-101 malloc memory failed
-100 Not supported or the data does not exist
-10 The length of transmitted data is incorrect
-5 Data already exists
-4 Insufficient space
-3 Wrong size
-2 File read/write error
-1 The SDK is not initialized and needs to be reconnected
0 Data not found or duplicate data
1 Correct operation
4 Parameter error
101 Buffer allocation error
102 repeat invoking
Underlying error codes:
-12001 Socket creation timeout (connection timeout)
-12002 Insufficient memory
-12003 Wrong Socket version
-12004 Not TCP protocol
-12005 Waiting timeout
-12006 Data transmission timeout
-12007 Data reading timeout
-12008 Failed to read Socket
-13009 Waiting event error
-13010 Exceeded retry attempts
-13011 Wrong reply ID
-13012 Checksum error
-13013 Waiting event timeout
-13014 DIRTY_DATA
-13015 Buffer size too small
-13016 Wrong data length
-13017 Invalid data read1
-13018 Invalid data read2
-13019 Invalid data read3
-13020 Data loss
-13021 Memory initialization error
-15001 Invoking return value of status key issued by SetShortkey interface repeatedly
-15002 Invoking return value of description issued by SetShortkey interface repeatedly
-15003 The two level menu is not opened in the device, and the data need not be issued
getdevicedata and setdevicedata invocation error codes
-15100 Error occurs in obtaining table structure
-15101 The condition field does not exist in the table structure
-15102 Inconsistency in the total number of fields
-15103 Inconsistency in sorting fields
-15104 Memory allocation error
-15105 Data parsing error
-15106 Data overflow as the transmitted data exceeds 4M
-15108 Invalid options
-15113 Data parsing error: table ID not found
-15114 A data exception is returned as the number of fields is smaller than or equal to 0
-15115 A data exception is returned as the total number of table fields is inconsistent with the
total number of fields of the data
Firmware error codes:
2000 Return OK to execute
-2001 Return Fail to execute command
-2002 Return Data
-2003 Regstered event occorred
-2004 Return REPEAT Command
-2005 Return UNAUTH Command
0xffff Return Unknown Command
-4999 Device parameter read error
-4998 Device parameter write error
-4997 The length of the data sent by the software to the device is incorrect
228
229
-4996 A parameter error exists in the data sent by the software to the device
-4995 Failed to add data to the database
-4994 Failed to update the database
-4993 Failed to read data from the database
-4992 Failed to delete data in the database
-4991 Data not found in the database
-4990 The data amount in the database reaches the limit
-4989 Failed to allocate memory to a session
-4988 Insufficient space in the memory allocated to a session
-4987 The memory allocated to a session overflows
-4986 File does not exist
-4985 File read failure
-4984 File write failure
-4983 Failed to calculate the hash value
-4982 Failed to allocate memory
Note
This interface is applicable to the new architecture firmware.
I have a fairly simple HLSL shader that is being compiled into SPIR-V using DirectxShaderCompiler. Though, using scalar layout causes validation layer error. I have enabled the VK_EXT_SCALAR_BLOCK_LAYOUT_EXTENSION_NAME extension while creating the VkDevice. Is it a validation layer, or dxc bug or do I require an additional flag to generate SPIR-V?
Command to generate SPIR-V:
COMMAND $ENV{VULKAN_SDK}/bin/dxc -spirv -fvk-use-scalar-layout -fvk-invert-y -T vs_6_0 -E ${vertexEntry} ${file} -Fo ${CMAKE_SOURCE_DIR}/Assets/${vertexEntry}.spv
Validation layer error:
Validation Error: [ UNASSIGNED-CoreValidation-Shader-InconsistentSpirv ] Object 0: handle = 0x1e320175dc0, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0x6bbb14 | SPIR-V module not valid: Structure id 7 decorated as BufferBlock for variable in Uniform storage class must follow relaxed storage buffer layout rules: member 1 is an improperly straddling vector at offset 12
%Vertex = OpTypeStruct %v3float %v3float %v2float
Hi i'm having an error on compile. Apparently i'm missing an extension :
validation layer: Validation Error: [ VUID-VkDeviceCreateInfo-pProperties-04451 ] Object 0: handle = 0x1055040c0, type = VK_OBJECT_TYPE_PHYSICAL_DEVICE; | MessageID = 0x3a3b6ca0 | vkCreateDevice: VK_KHR_portability_subset must be enabled because physical device VkPhysicalDevice 0x1055040c0[] supports it The Vulkan spec states: If the [VK_KHR_portability_subset] extension is included in pProperties of vkEnumerateDeviceExtensionProperties, ppEnabledExtensions must include "VK_KHR_portability_subset". (https://vulkan.lunarg.com/doc/view/1.2.176.1/mac/1.2-extensions/vkspec.html#VUID-VkDeviceCreateInfo-pProperties-04451)
I naively added to the deviceExtension vector "VK_KHR_portability_subset" and then got a second error who seems to be similar to the previous one.
validation layer: Validation Error: [ VUID-vkCreateDevice-ppEnabledExtensionNames-01387 ] Object 0: VK_NULL_HANDLE, type = VK_OBJECT_TYPE_INSTANCE; | MessageID = 0x12537a2c | Missing extension required by the device extension VK_KHR_portability_subset: VK_KHR_get_physical_device_properties2. The Vulkan spec states: All required extensions for each extension in the VkDeviceCreateInfo::ppEnabledExtensionNames list must also be present in that list (https://vulkan.lunarg.com/doc/view/1.2.176.1/mac/1.2-extensions/vkspec.html#VUID-vkCreateDevice-ppEnabledExtensionNames-01387)
I added to the deviceExtension vector "VK_KHR_get_physical_device_properties2" and then got a third error :
libc++abi: terminating with uncaught exception of type std::runtime_error: failed to find a suitable GPU!
The thing is that previously he recognized that i was using a m1 chip but now no informations on the device shows :(
I added to the deviceExtension vector "VK_KHR_get_physical_device_properties2"
VK_KHR_get_physical_device_properties2 is an instance extension, and as such belongs to vkCreateInstance (not device).
Reportedly, that fixed your issue.
I have encountered same message on same device and after some research understood it's not error, just a warning. If you don't really need to handle this special case, you can just ignore it.
Hello people of StackOverflow,
I am currently working on a games engine using the Vulkan graphics API, in the past I was just setting anti-aliasing to the max it could be. However today I was trying to turn it off (to improve performance on weaker systems). To do this I tried to set the MSAA samples on my engine to VK_SAMPLE_COUNT_1_BIT however this produced the validation error:
Validation Error: [ VUID-VkSubpassDescription-pResolveAttachments-00848 ] Object 0: handle = 0x55aaa6e32828, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0xfad6c3cb | ValidateCreateRenderPass(): Subpass 0 requests multisample resolve from attachment 0 which has VK_SAMPLE_COUNT_1_BIT. The Vulkan spec states: If pResolveAttachments is not NULL, for each resolve attachment that is not VK_ATTACHMENT_UNUSED, the corresponding color attachment must not have a sample count of VK_SAMPLE_COUNT_1_BIT (https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#VUID-VkSubpassDescription-pResolveAttachments-00848)
I can work around this problem relatively easily so it isn't really an issue for me, however I was wondering why exactly this limit is put into place. If I want to set the MSAA samples to 1 why can't I?
Thanks,
sckzor
A sample count of 1 means "not a multisampled image". And if you're doing multisample resolve, resolving from a non-multisampled image doesn't make sense. Which is also why you can't use such images for any other things that expect a multisampled image (you can't use an MS-style sampler or texture function on them).