In source csv file the data contains white spaces. How to remove those without using any transformation tool and just using Azure Data Factory. I tried "For each" activity on copy activity but the For each #items is of JSON array and string functions doesn't apply on it. Also, Data factory does not support custom functions and expressions. Is there any way to remove the white spaces from the source or during the copy process to the sink? Source and Sink are "Azure Files".
If not all the csv data contains white spaces, as I know about DF and per my experience, it's impossible to achieve that data conversion only with Copy active! Using data flow or others tools is very easy.
There isn't a way to achieve this using ADF only or directly.
HTH.
The most performant way to achieve this would be to temporarily stage the data in Azure SQL or Cosmos DB and then trim each column with an explicit SELECT statement as the source of the subsequent Copy activity moving the data to your sink file.
Related
I am trying to import a small table of data from Azure SQL into Snowflake using Azure Data Factory.
Normally I do not have any issues using this approach:
https://learn.microsoft.com/en-us/azure/data-factory/connector-snowflake?tabs=data-factory#staged-copy-to-snowflake
But now I have an issue, with a source table that looks like this:
There is two columns SLA_Processing_start_time and SLA_Processing_end_time that have the datatype TIME
Somehow, while writing the data to the staged area, the data is changed to something like 0:08:00:00.0000000,0:17:00:00.0000000 and that causes for an error like:
Time '0:08:00:00.0000000' is not recognized File
The mapping looks like this:
I have tried adding a TIME_FORMAT property like 'HH24:MI:SS.FF' but that did not help.
Any ideas to why 08:00:00 becomes 0:08:00:00.0000000 and how to avoid it?
Finally, I was able to recreate your case in my environment.
I have the same error, a leading zero appears ahead of time (0: 08:00:00.0000000).
I even grabbed the files it creates on BlobStorage and the zeros are already there.
This activity creates CSV text files without any error handling (double quotes, escape characters etc.).
And on the Snowflake side, it creates a temporary Stage and loads these files.
Unfortunately, it does not clean up after itself and leaves empty directories on BlobStorage. Additionally, you can't use ADLS Gen2. :(
This connector in ADF is not very good, I even had problems to use it for AWS environment, I had to set up a Snowflake account in Azure.
I've tried a few workarounds, and it seems you have two options:
Simple solution:
Change the data type on both sides to DateTime and then transform this attribute on the Snowflake side. If you cannot change the type on the source side, you can just use the "query" option and write SELECT using the CAST / CONVERT function.
Recommended solution:
Use the Copy data activity to insert your data on BlobStorage / ADLS (this activity did it anyway) preferably in the parquet file format and a self-designed structure (Best practices for using Azure Data Lake Storage).
Create a permanent Snowflake Stage for your BlobStorage / ADLS.
Add a Lookup activity and do the loading of data into a table from files there, you can use a regular query or write a stored procedure and call it.
Thanks to this, you will have more control over what is happening and you will build a DataLake solution for your organization.
My own solution is pretty close to the accepted answer, but I still believe that there is a bug in the build-in direct to Snowflake copy feature.
Since I could not figure out, how to control that intermediate blob file, that is created on a direct to Snowflake copy, I ended up writing a plain file into the blob storage, and reading it again, to load into Snowflake
So instead having it all in one step, I manually split it up in two actions
One action that takes the data from the AzureSQL and saves it as a plain text file on the blob storage
And then the second action, that reads the file, and loads it into Snowflake.
This works, and is supposed to be basically the same thing the direct copy to Snowflake does, hence the bug assumption.
I'm using Azure Data Factory and am looking for the complement to the "Lookup" activity. Basically I want to be able to write a single line to a file.
Here's the setup:
Read from a CSV file in blob store using a Lookup activity
Connect the output of that to a For Each
within the For Each, take each record (a line from the file read by the Lookup activity) and write it to a distinct file, named dynamically.
Any clues on how to accomplish that?
Use Data flow, use the derived column activity to create a filename column. Use the filename column in sink. Details on how to implement dynamic filenames in ADF is describe here: https://kromerbigdata.com/2019/04/05/dynamic-file-names-in-adf-with-mapping-data-flows/
Data Flow would probably be better for this, but as a quick hack, you can do the following to read the text file line by line in a pipeline:
Define your source dataset to output a line as a single column. Normally I would use "NoDelimiter" for this, but that isn't supported by Lookup. As a workaround, define it with an incorrect Column Delimiter (like | or \t for a CSV file). You should also go to the Schema tab, and CLEAR the schema. This will generate a column in the output named "Prop_0".
In the foreach activity, set the Items to the Lookup's "output.value" and check "Sequential".
Inside the foreach, you can use item().Prop_0 to grab the text of the line:
To the best of my understanding, creating a blob isn't directly supported by pipelines [hence my suggestion above to look into Data Flow]. It is, however, very simple to do in Logic Apps. If I was tackling this problem, I would create a logic app with an HTTP Request Received trigger, then call it from ADF with a Web activity and send the text line and dynamic file name in the payload.
I have legacy data stored as CSV in an Azure DataLake Gen2 storage account. I'm able to connect to this and interrogate it using DataBricks. I have a requirement to remove certain records once their retention period expires, or if a GDPR "right to be forgotten" needs applying to the data.
Using Delta I can load a CSV into a Delta table and use SQL to locate and delete the required rows, but what is the best way to save these changes? Ideally back to the original file, so that the data is removed from the original. I've used the LOCATION option when creating the Delta table to persist the generated Parquet format files to the DataLake but it would be nice to keep it in the original CSV format.
Any advice appreciated.
I'd be careful here. Right to be forgotten means you need to delete the data. Delta doesn't actually delete it from the original file (initially at least) - this will only happen once the data is vacuumed.
The safest way to delete data is to read all the data into a dataframe, filter off the records you do not want and then write it back using overwrite. This will ensure the data is remove and the same structure is re-written.
Convert Parquet to CSV in ADF
The versioned parquet files created in the ADLS Gen2 location can be converted to CSV using the Copy Data task in an Azure Data Factory pipeline.
So, you could read the CSV data into a Delta table(with location pointing to a Data lake folder), perform the required changes using SQL and then convert the parquet files to CSV format using ADF.
I have tried this and it works. The only hurdle might be detecting the column headers while reading the CSV file to Delta. You could read it to a dataframe and create a Delta table from it.
If you are running the delete operations periodically then it is costly to save file in csv, As every time you are reading the file and transforming the dataframe to Delta and then query on it and finally after filtering the records you are again saving it to csv and deleting the Delta table.
So my suggestion here would be, transform the csv to Delta once, perform delete periodically and generate csv only when it's needed.
The advantage here is - Delta internally stores data in parquet format which stores data in binary format and allow better compression and encoding/decoding of data.
Currently I'm importing a CSV file into an Azure SQL database automatically each morning at 3 am, but the file has several blank lines in the csv file that are imported as rows which is cleaned up after the data is ingested.
There isn't a way to correct the file prior to ingestion, so I need to transform the data once it's been ingested and would like to avoid having to do this manually.
Is using something like Azure Data Factory the best approach to doing this? Or is there a less expensive / simpler way to simply remove blank lines via something akin to a stored procedure for Azure SQL Database?
My problem statement is that I have a csv blob and I need to import that blob into a sql table. Is there an utility to do that?
I was thinking of one approach, that first to copy blob to on-premise sql server using AzCopy utility and then import that file in sql table using bcp utility. Is this the right approach? and I am looking for 1-step solution to copy blob to sql table.
Regarding your question about the availability of a utility which will import data from blob storage to a SQL Server, AFAIK there's none. You would need to write one.
Your approach seems OK to me. Though you may want to write a batch file or something like that to automate the whole process. In this batch file, you would first download the file on your computer and the run the BCP utility to import the CSV in SQL Server. Other alternatives to writing batch file are:
Do this thing completely in PowerShell.
Write some C# code which makes use of storage client library to download the blob and once the blob is downloaded, start the BCP process in your code.
To pull a blob file into an Azure SQL Server, you can use this example syntax (this actually works, I use it):
BULK INSERT MyTable
FROM 'container/folder/folder/file'
WITH ( DATA_SOURCE = 'ds_blob',BATCHSIZE=10000,FIRSTROW=2);
MyTable has to have identical columns (or it can be a view against a table that yields identical columns)
In this example, ds_blob is an external data source which needs to be created beforehand (https://learn.microsoft.com/en-us/sql/t-sql/statements/create-external-data-source-transact-sql)
The external data source needs to use a database contained credential, which uses an SAS key which you need to generate beforehand from blob storage https://learn.microsoft.com/en-us/sql/t-sql/statements/create-database-scoped-credential-transact-sql)
The only downside to this mehod is that you have to know the filename beforehand - there's no way to enumerate them from inside SQL Server.
I get around this by running powershell inside Azure Automation that enumerates blobds and writes them into a queue table beforehand