Let's say I have a table like so
CREATE TABLE Records (Event VARCHAR, Severity INT, Location VARCHAR)
I'd like to be able to grab the Event name and location of the row with the lowest severity. How could I achieve this?
Using top(1), limit(1) etc... you will get only one record with the lowest severity, but in case there are 2 of them you will lose the second.
I suggest you to use a nested query as follows:
from records r
where Severity = (
select min(severity)
from records
)
One simple method:
select top (1) r.*
from records r
order by r.severity;
If you want all rows in the event of ties, then use:
select top (1) with ties r.*
Related
Failed finding a solution to my problem, would love your help.
~~ Post has been edited to have only one question ~~-
Group by one query while selecting multiple columns.
In MySQL you can simply group by whatever you want, and it will still select all of them, so if for example I wanted to select the newest 100 transactions, grouped by Email (only get the last transaction of a single email)
In MySQL I would do that:
SELECT * FROM db.transactionlog
group by Email
order by TransactionLogId desc
LIMIT 100;
In SQL Server its not possible, googling a bit suggested to specify each column that I want to have with an aggregate as a hack, that couldn't cause a mix of values (mixing columns between the grouped rows)?
For example:
SELECT TOP(100)
Email,
MAX(ResultCode) as 'ResultCode',
MAX(Amount) as 'Amount',
MAX(TransactionLogId) as 'TransactionLogId'
FROM [db].[dbo].[transactionlog]
group by Email
order by TransactionLogId desc
TransactionLogId is the primarykey which is identity , ordering by it to achieve the last inserted.
Just want to know that the ResultCode and Amount that I'll get doing such query will be of the last inserted row, and not the highest of the grouped rows or w/e.
~Edit~
Sample data -
row1:
Email : test#email.com
ResultCode : 100
Amount : 27
TransactionLogId : 1
row2:
Email: test#email.com
ResultCode:50
Amount: 10
TransactionLogId: 2
Using the sample data above, my goal is to get the row details of
TransactionLogId = 2.
but what actual happens is that I get a mixed values of the two, as I do get transactionLogId = 2, but the resultcode and amount of the first row.
How do I avoid that?
Thanks.
You should first find out which is the latest transaction log by each email, then join back against the same table to retrieve the full record:
;WITH MaxTransactionByEmail AS
(
SELECT
Email,
MAX(TransactionLogId) as LatestTransactionLogId
FROM
[db].[dbo].[transactionlog]
group by
Email
)
SELECT
T.*
FROM
[db].[dbo].[transactionlog] AS T
INNER JOIN MaxTransactionByEmail AS M ON T.TransactionLogId = M.LatestTransactionLogId
You are currently getting mixed results because your aggregate functions like MAX() is considering all rows that correspond to a particular value of Email. So the MAX() value for the Amount column between values 10 and 27 is 27, even if the transaction log id is lower.
Another solution is using a ROW_NUMBER() window function to get a row-ranking by each Email, then just picking the first row:
;WITH TransactionsRanking AS
(
SELECT
T.*,
MostRecentTransactionLogRanking = ROW_NUMBER() OVER (
PARTITION BY
T.Email -- Start a different ranking for each different value of Email
ORDER BY
T.TransactionLogId DESC) -- Order the rows by the TransactionLogID descending
FROM
[db].[dbo].[transactionlog] AS T
)
SELECT
T.*
FROM
TransactionsRanking AS T
WHERE
T.MostRecentTransactionLogRanking = 1
I have a table Trial_tb with columns p_id,t_number and rundate.
Sample values:
p_id|t_number|rundate
=====================
111|333 |1/7/2016||
111|333 |1/1/2016||
222|888 |1/8/2016||
222|444 |1/2/2016||
666|888 |1/6/2016||
555|777 |1/5/2016||
pid and tnumber are key columns. I need fetch values such that the result should not have any record in which pid-tnumber combination are duplicated. For example there is duplication for 111|333 and hence not valid. The query should fetch all other than first two records.
I wrote below script but it fetches only the last record. :(
select rundate,p_id,t_number from
(
select rundate,p_id,t_number,
count(p_id) over (partition by p_id) PCnt,
count(t_number) over (partition by t_number) TCnt
from trialtb
)a
where a.PCnt=1 and a.TCnt=1
The having clause is ideal for this job. Having allows you to filter on aggregated records.
-- Finding unique combinations.
SELECT
p_id,
t_number
FROM
trialtb
GROUP BY
p_id,
t_number
HAVING
COUNT(*) = 1
;
This query returns combinations of p_id and t_number that occur only once.
If you want to include rundate you could add MAX(rundate) AS rundate to the select clause. Because you are only looking at unique occurrences the max or min would always be the same.
Do you mean:
select
p_id,t_number
from
trialtb
group by
p_id,t_number
having
count(*) = 1
or do you need the run date too?
select
p_id,t_number,max(rundate)
from
trialtb
group by
p_id,t_number
having
count(*) = 1
Seeing as you are only looking items with one result using max or min should work fine
I m using report tab -> group sort expert-> top n to get top n record but i m getting sum of value in report footer for all records
I want only sum of value of top n records...
In below image i have select top 3 records but it gives sum of all records.
The group sort expert (and the record sort expert too) intervenes in your final result after the total summary is calculated. It is unable to filter and remove rows, in the same way an ORDER BY clause of SQL cannot effect the SELECT's count result (this is a job for WHERE clause). As a result, your summary will always be computed for all rows of your detail section and, of course, for all your group sums.
If you have in mind a specific way to exlude specific rows in order to appear the appropriate sum the you can use the Select Expert of Crystal Reports to remove rows.
Alternatively (and I believe this is the best way), I would make all the necessary calculations in the SQL command and I would sent to the report only the Top 3 group sums (then you can get what you want with a simple total summary of these 3 records)
Something like that
CREATE TABLE #TEMP
(
DEP_NAME varchar(50),
MINVAL int,
RMAVAL int,
NETVAL int
)
INSERT INTO #TEMP
SELECT TOP 3
T.DEP_NAME ,T.MINVAL,T.RMAVAL,T.NETVAL
FROM
(SELECT DEP_NAME AS DEP_NAME,SUM(MINVAL) AS MINVAL,SUM(RMAVAL) AS
RMAVAL,SUM(NETVAL) AS NETVAL
FROM YOURTABLE
GROUP BY DEP_NAME) AS T
ORDER BY MINVAL DESC
SELECT * FROM #TEMP
Write Oracle SQL query to fetch from Tasks table top Approval Statuses that appear after some first null value in the Approval_Status Column and then Approval Status sequence and then some null values
Facts
I only need the top Approval Statuses sequence
Serial Number for each task ID Sequence starts from 1 and then comes in Sequence like 1.2.3... and so on
There are thousands of tasks in the table like from T1 .... Tn
See the Query Result below i need to write a query that returns data in that format
I have heard analytic function i.e. "Partition By clause" for this can be used but i don't know how to use that
Tasks
Query Result
I really appreciate experts help in this regard
Thanks
You can do this with analytic functions, but there is a trick. The idea is to look only at rows where approval_status is not null. You want the first group of sequential serial numbers in this group.
The group is identified by the difference between a sequence that enumerates all the rows and the existing serial number. To get the first, use dense_rank(). Finally, choose the first by looking for the ones with a rank equal to 1:
select t.*
from (select t.*, dense_rank(diff) over (partition by taskid) as grpnum
from (select t.*,
(row_number() over (partition by taskid order by serial_number) -
serial_number
) as diff
from tasks
where approval_status is not null
) t
) t
where grpnum = 1;
I would like to see a most concise way to do what is outlined in this SO question: Sum values from multiple rows into one row
that is, combine multiple rows while summing a column.
But how to then delete the duplicates. In other words I have data like this:
Person Value
--------------
1 10
1 20
2 15
And I want to sum the values for any duplicates (on the Person col) into a single row and get rid of the other duplicates on the Person value. So my output would be:
Person Value
-------------
1 30
2 15
And I would like to do this without using a temp table. I think that I'll need to use OVER PARTITION BY but just not sure. Just trying to challenge myself in not doing it the temp table way. Working with SQL Server 2008 R2
Simply put, give me a concise stmt getting from my input to my output in the same table. So if my table name is People if I do a select * from People on it before the operation that I am asking in this question I get the first set above and then when I do a select * from People after the operation, I get the second set of data above.
Not sure why not using Temp table but here's one way to avoid it (tho imho this is an overkill):
UPDATE MyTable SET VALUE = (SELECT SUM(Value) FROM MyTable MT WHERE MT.Person = MyTable.Person);
WITH DUP_TABLE AS
(SELECT ROW_NUMBER()
OVER (PARTITION BY Person ORDER BY Person) As ROW_NO
FROM MyTable)
DELETE FROM DUP_TABLE WHERE ROW_NO > 1;
First query updates every duplicate person to the summary value. Second query removes duplicate persons.
Demo: http://sqlfiddle.com/#!3/db7aa/11
All you're asking for is a simple SUM() aggregate function and a GROUP BY
SELECT Person, SUM(Value)
FROM myTable
GROUP BY Person
The SUM() by itself would sum up the values in a column, but when you add a secondary column and GROUP BY it, SQL will show distinct values from the secondary column and perform the aggregate function by those distinct categories.