How can I find matching line in char/string type column?
For example let say I have column called text and some row has content of:
12345\nabcdf\nXKJKJ
(where \n are real new lines)
Now I want to find related row if any of lines match. For example, I have value 12345,
then it should find match. But if I have value 123, It would not.
I tried using like but it finds in both cases, when I have matching value (like 12345) and partially matching value (like 123).
For example something like this, but to have boundary for checking whole line:
SELECT id
FROM my_table
WHERE text like [SOME_VALUE]
Update
Maybe its not yet clear what Im asking. But basically I want something equivalent what you can do with regular expression,
like this: https://regexr.com/5akj1
Here regular expression /^123$/m would not match my string, it would only match if it would have been with pattern /^12345$/m (when I use pattern, value is dynamic, so pattern would change depending what value I got).
You may use regexp_replace and then check that the replaced string is not equal to the original column value:
select count(*)
from dummy
where regexp_replace(mytext, '(?m)^1234$', '') <> mytext;
You have a demo here.
Bear in mind that I have used the (?m) modifier, which makes ^ and $ match begin and end of line instead of begin and end of string.
You should be able to use ~ for matching:
where mytext ~ '(\n|^)1234(\n|$)'
Related
I want to verify a field,
if a field is only number like 12345, return nothing
if a field is something like 1234-1, or -123331, return nothing
if a field is a12341, or 34j123 or 99933hh return 1
if a field is a1234-, or sodf233- return 1.
Basically just check if there is a non number character in this field, but allow the dash to be in.
Here is my thoughts:
select 1
from dbo.random.field
where ISNUMBERIC(field)=0 and field not like '%-%'
Use this to check if there is letter, and then, if there is a -, but my test case always like this:
12345 Pass
12345a Failed
12345- Pass
1234a- Pass, but this should fail.
So what am I doing wrong here?
Let me assume you are using SQL Server, based on isnumeric(). You can use like:
where field like 'a%[0-9]%' and
field not like 'a%[^-0-9]%'
The first checks that the column starts with 'a' and has at least one digit. The second checks that there are no non-digits or non-hyphens after the 'a'.
You can generalize the a to any letter using [a-z] (assuming case insensitivity) or to any non-digit using [^0-9].
EDIT:
For your revised question, you just seem to want a letter. You can use:
select *
from (values ('12345'), ('1234-1'), ('1234-1'), ('a12341'), ('34j123'), ('99933hh'), ('a1234-'), ('sodf233-')) v(field)
where field like '%[^-0-9]%';
So this is what I did in the end
like '%[^-0-9]%'
I need some help with the next. I have a field text in SQL, this record a list of times sepparates with '|'. For example
'14613|15474|3832|148|5236|5348|1055|524' Each value is a time in milliseconds. This field could any length, for example is perfect correct '3215|2654' or '4565' (only 1 value). I need get this field and replace all number with -1000 value.
So '14613|15474|3832|148|5236|5348|1055|524' will be '-1000|-1000|-1000|-1000|-1000|-1000|-1000|-1000'
Or '3215|2654' => '-1000|-1000' Or '4565' => '-1000'.
I try use regexp_replace(times_field,'[[:digit:]]','-1000','g') but it replace each digit, not the complete number, so in this example:
'3215|2654' than must be '-1000|-1000', i get:
'-1000-1000-1000-1000|-1000-1000-1000-1000', I try with other combinations and more options of regexp but i'm done.
Please need your help, thanks!!!.
We can try using REGEXP_REPLACE here:
UPDATE yourTable
SET times_field = REGEXP_REPLACE(times_field, '\y[0-9]+\y', '-1000', 'g');
If instead you don't really want to alter your data but rather just view your data this way, then use a select:
SELECT
times_field,
REGEXP_REPLACE(times_field, '\y[0-9]+\y', '-1000', 'g') AS times_field_replace
FROM yourTable;
Note that in either case we pass g as the fourtb parameter to REGEXP_REPLACE to do a global replacement of all pipe separated numbers.
[[:digit:]] - matches a digit [0-9]
+ Quantifier - matches between one and unlimited times, as many times as possible
your regexp must look like
regexp_replace(times_field,'[[:digit:]]+','-1000','g')
I am using Snowflake SQL. I would like to remove characters from a string after a special character ~. How can I do that?
here is the whole scenario. Let me explain. I do have a string like 'CK#123456~fndkjfgdjkg'. Now, i want only the number after #.And not anything after ~. This is number length varies for that field value. It might be 1 or 5 or 3. And i want to add the condition in where class where this number is equal to check_num from other table after joining. I am trying REGEXP_SUBSTR(A.SRC_TXT, '(?<=CK#)(.+?\b)') = C.CHK_NUM in the where condition. I am getting the error as 'No repititive argument after ?'
You can use a regex for this
-- To remove just the character after a ~
select regexp_replace('fo~o bar','~.', '');
-- returns 'fo bar'
--If you want to keep the ~
select regexp_replace('fo~o bar','~.', '~');
-- returns 'fo~ bar'
--If you want to remove everything after the ~
select regexp_replace('fo~o bar','~.*', '');
--returns 'fo'
If you need to remove other specific character sets after a ~, you can probably do this with a slightly more complicated regex, but I'd need examples of your desired input/output to help with that.
EDIT for updated question
This regex replace should get what you need.
select regexp_replace('CK#123456~fndkjfgdjkg','CK#(\\d*)~.*', '\\1');
-- returns 123456
(\\d*) gets ANY number of digits in a row, and the \\1 causes it to replace the match with what was in the first set of parenthesis, which is your list of digits. the CK# and ~.* are there to make sure the whole string gets matched and replaced.
If the CK# can vary as well, you can use .*? like this.
select regexp_replace('ABCD123HI#123456~fndkjfgdjkg','.*?#(\\d*)~.*', '\\1')
-- returns 123456
I'd probably do something like the following, easy enough but not as cool as RegEx type of functions.
set my_string='fooo~12345';
set search_for_me = '~';
SELECT SUBSTR($my_string, 1, DECODE(position($search_for_me, $my_string), 0, length($my_string), position($search_for_me, $my_string)));
I hope this helps...Rich
It looks like lookahead and lookbehinds are not supported in REGEXP functions, they seem to work in the PATTERN clause of a LIST command. Snowflake documentation makes no mention either way of lookahead or lookbehinds.
In your example:
It seems that the query engine is looking for that repeating argument, where you are attempting a lookbehind
You have not specified what you wanted extracted. You have two capture groups, but in this scenario everything would be returned
Since you are looking to remove everything after ~ you have a delimiter, why not use it in your REGEXP_SUBSTR function?
Try the following:
SELECT $1,REGEXP_SUBSTR($1,'\\w+#(.+?)~',1,1,'is',1)
FROM VALUES
('CK#123456~fndkjfgdjkg')
,('QH#128fklj924~fndkjfgdjkg')
;
This looks for:
One or more word characters
Followed by #
Capturing one or more characters upto and not including ~
Returns the characters within the capture group
You can change the .+? to \\d+? to make sure the pattern is only digits. Backslashes must be escaped with a backslash.
The descriptions for each argument of the function can be found here:
https://docs.snowflake.net/manuals/sql-reference/functions/regexp_substr.html
You could check this!!
select substr('CK#123456~fndkjfgdjkg',4,6) from dual;
OUTPUT
123456
https://docs.snowflake.net/manuals/sql-reference/functions/substr.html
I have a questions regarding below data.
You clearly can see each EMP_IDENTIFIER has connected with EMP_ID.
So I need to pull only identifier which is 10 characters that will insert another column.
How would I do that?
I did some traditional way, using INSTR, SUBSTR.
I just want to know is there any other way to do it but not using INSTR, SUBSTR.
EMP_ID(VARCHAR2)EMP_IDENTIFIER(VARCHAR2)
62049 62049-2162400111
6394 6394-1368000222
64473 64473-1814702333
61598 61598-0876000444
57452 57452-0336503555
5842 5842-0000070666
75778 75778-0955501777
76021 76021-0546004888
76274 76274-0000454999
73910 73910-0574500122
I am using Oracle 11g.
If you want the second part of the identifier and it is always 10 characters:
select t.*, substr(emp_identifier, -10) as secondpart
from t;
Here is one way:
REGEXP_SUBSTR (EMP_IDENTIFIER, '-(.{10})',1,1,null,1)
That will give the 1st 10 character string that follows a dash ("-") in your string. Thanks to mathguy for the improvement.
Beyond that, you'll have to provide more details on the exact logic for picking out the identifier you want.
Since apparently this is for learning purposes... let's say the assignment was more complicated. Let's say you had a longer input string, and it had several groups separated by -, and the groups could include letters and digits. You know there are at least two groups that are "digits only" and you need to grab the second such "purely numeric" group. Then something like this will work (and there will not be an instr/substr solution):
select regexp_substr(input_str, '(-|^)(\d+)(-|$)', 1, 2, null, 2) from ....
This searches the input string for one or more digits ( \d means any digit, + means one or more occurrences) between a - or the beginning of the string (^ means beginning of the string; (a|b) means match a OR b) and a - or the end of the string ($ means end of the string). It starts searching at the first character (the second argument of the function is 1); it looks for the second occurrence (the argument 2); it doesn't do any special matching such as ignore case (the argument "null" to the function), and when the match is found, return the fragment of the match pattern included in the second set of parentheses (the last argument, 2, to the regexp function). The second fragment is the \d+ - the sequence of digits, without the leading and/or trailing dash -.
This solution will work in your example too, it's just overkill. It will find the right "digits-only" group in something like AS23302-ATX-20032-33900293-CWV20-3499-RA; it will return the second numeric group, 33900293.
Im using regexp to find the text after a word appear.
Fiddle demo
The problem is some address use different abreviations for big house: Some have space some have dot
Quinta
QTA
Qta.
I want all the text after any of those appear. Ignoring Case.
I try this one but not sure how include multiple start
SELECT
REGEXP_SUBSTR ("Address", '[^QUINTA]+') "REGEXPR_SUBSTR"
FROM Address;
Solution:
I believe this will match the abbreviations you want:
SELECT
REGEXP_REPLACE("Address", '^.*Q(UIN)?TA\.? *|^.*', '', 1, 1, 'i')
"REGEXPR_SUBSTR"
FROM Address;
Demo in SQL fiddle
Explanation:
It tries to match everything from the begging of the string:
until it finds Q + UIN (optional) + TA + . (optional) + any number of spaces.
if it doesn't find it, then it matches the whole string with ^.*.
Since I'm using REGEXP_REPLACE, it replaces the match with an empty string, thus removing all characters until "QTA", any of its alternations, or the whole string.
Notice the last parameter passed to REGEXP_REPLACE: 'i'. That is a flag that sets a case-insensitive match (flags described here).
The part you were interested in making optional uses a ( pattern ) that is a group with the ? quantifier (which makes it optional). Therefore, Q(UIN)?TA matches either "QUINTA" or "QTA".
Alternatively, in the scope of your question, if you wanted different options, you need to use alternation with a |. For example (pattern1|pattern2|etc) matches any one of the 3 options. Also, the regex (QUINTA|QTA) matches exactly the same as Q(UIN)?TA
What was wrong with your pattern:
The construct you were trying ([^QUINTA]+) uses a character class, and it matches any character except Q, U, I, N, T or A, repeated 1 or more times. But it's applied to characters, not words. For example, [^QUINTA]+ matches the string "BCDEFGHJKLMOPRSVWXYZ" completely, and it fails to match "TIA".