Ok - found a new problem - I wondered it it was just me at first - but my client - Headline Solar - whenever I import the file - it never gives me a "key" to place over the primary key column - which makes me think it has already decided to use the ExtRefId field - which is unique. Upon testing data, however, I noticed that it only imports the last record in the file of about 105 records. There is an empty "Id" field in that one record showing through Spiff. Anyone seen this problem?
The answer is to check the case of the sheet name, which will become your table name - example - if you named the sheet "Sales" - change this to "sales" and re-import. The Primary Key icon will return.
You may need to remove the table, first, through CAMP, however. Attempt to fix before removing the table in CAMP.
Related
I have imported data table to my cytoscape map for the following continuous mapping accorging to values. After some time, I have imported another data table and then deleted the previous one. The original data are not present in either the node or edge table but I still can see the names of the original columns when selecting column for continuous mapping i. g. for size or colour. Moreover, this warning appears: "The current table does not have the selected column. Please select another column." Do you know how to solve this so that I no longer see the names when these columns are not even in the table?
I would be grateful for any ideas.
I have tried to delete the data table and import the data again but it didn't help. I have also tried to clone current network and import data to the new map, but the old names are still present in the column selection.
Do you know how to solve this so that I no longer see the names when these columns are not even in the table?
I would be grateful for any ideas.
A couple points and then a couple suggestions:
The style is going to "remember" the selected column name, even if you delete it since it doesn't know what to change it to. It will add a warning icon mentioning that the column is missing. You have to choose a new column (or reload the missing column) to address that issue. [I think you know this already, but just stating for completeness :)]
The pulldown list of column names should be updated when you delete table columns. This does indeed sound like a bug.
Are you running the latest Cytoscape 3.9.1?
Have you tried selecting another style and then returning back to this style? That might "refresh" the column name list.
Have you tried saving/restoring the session?
Is it possible, if one does not want to take the AutoValue, to take as default value for a Large Integer, or even normal number, the largest value already used for this from the column and add to it?
I need an increment of 4, starting with a number I choose.
I'm using version 2016 of Office.
I found several possible solutions, which I've entered into the expression generator of the default value at Field Properties:
CODE: SELECT ALL
=Max([MyID])+1
Or
CODE: SELECT ALL
=DomMax("MyID"; "Table name")
I always get the error message:
Unknown function 'DMax' in the validity expression or default value in 'MyID.TableName'
I came across the tip that the references under VBA Editor --> Extras --> References must be correct. Here, however, I haven't the slightest idea which of these I would have to activate, if this is the problem at all.
The PrimaryKey of a table can sometimes be used as a part number in a Parts table or a userID in a Users table but otherwise is a number the user of a database should never see and certainly not manipulate. This is the first reason I suggest solution 2.
Solution 1. In Access just like with any other database I have seen that uses SQL, You can create an AutoNumber that increments by 4 using the Data Definition Language part of SQL. Maybe the Access designers considered changing the increment too rare or too advanced to put in the menu system. However, Altering the increment is not hard just open the query designer and go to the sql tab and type in appropriate SQL.
In Access 2007, how do I change the Auto Increment value?
First, Create your table as normal but don't insert any data. Then open the query designer, and open the sql pane (In this case it doesn't matter what you have in the design view as you are over writing any SQL), type
ALTER TABLE MyTableName
ALTER COLUMN MyAutoNumberColumnName AUTOINCREMENT(1,4);
The sql pane's ribbon should auto select Data Definition Language.
Run the query and solution 1 is done. When you enter Data in the table MyAutoNumberColumnName will start at 1 and increment by 4.
Solution 2: Don't use the primary key. Instead create another variable and display it. This is one example why data should be entered using forms. In the form's BeforeInsert Event calculate the variable and set it's textbox.
Private Sub Form_BeforeInsert(Cancel As Integer)
Me.txtBoxAlternateIDColumn.Value = Nz(DMax("MyAlternateIDColumn", "MyTableName") + 4, 1)
End Sub
'NZ handles the annoying case where the table is completely empty
I've used Solution 2 a couple times and I don't let the person doing data entry even see the alternateID textbox on the data entry form.
You can also use a Create Table statement in the DDL
Here is a youtube example of solution 2: https://www.youtube.com/watch?v=ZOg4P6v5ewA
I'm trying to inspect the data of a table via transaction code SE16(n) on a development system. I'd like to see all of the table's records. In other words, I don't want there to be any selection criteria. But the table has a numeric key that I have to specify. Is there a wildcard-like value that I can enter so any record matches the key?
Thanks in advance,
Joshua
In transaction codes SE16 and SE16N, by default all the lines of the selected table should be displayed up to the maximum defined in the selection screen (leave the field blank to display all).
If you click the button "Number of entries", you can see how many lines there are in the table (NB: it counts only the lines in the current client if the table is client-dependent).
Sometimes the selection may not work well if the selected table field has a "kind of defective" Conversion Exit (at Domain level in the ABAP Dictionary), but that happens rarely.
I'm trying to properly script importing a daily database into a master database.
Everything in the script I have currently works just fine, except for the import step.
I want to:
arrange by matching names
update matching records in found set
add remaining data as new records
and I want to set my matching field to the UUID in my database.
dialog off
I've found that when importing via script, filemaker doesn't really let you do "matching names" and set the matching field.
I've resorted to setting the script to use Last Order and manually importing a sample file before I do a batch of imports via script. Kind of a pain, and not a solid solution for me to share with my coworkers.
ANY help is appreciated!
Import Records using matching fields AND matching records is - sadly - not possible.
The best you can do is make it work 'for now' - as Siva describes - PLUS mark the script, so you remember to update the script EVERY TIME you add/change your fields! :-/
For example: We use the flag "#NF#" in script names for scripts that need to be edited when we add a New Field
I made exactly this feature request to Claris in 2017: see Import records with matching field names AND update matching records
Please vote it up, shout it up + discuss, in order to (maybe) get it implemented by Claris.
Select "Matching Names" option. It will match the names of both tables. Then select the UUID field option as "Match records based on this field". Now the "Matching Names" automatically changed to "Custom Order". It will still remember the field mapping.
I would like to have a complete copy of a Record Permission field.
For example - I have a field "OWNER" which is Record Permission type.
I want to create another field called "OWNER_COPY" which will always include the value which was selected in the OWNER field.
I thought of few ways to do so but none succeeded:
Crete a new Record Permission field (OWNER_COPY) but it has no option to be calculated (it doesn't have the option: "Set the value of this field using....")
Create calculated Text field (OWNER_COPY)- but if I'm writing [OWNER] in the formula it will provide the ID of the value and not its name.(e.g. if the owner was "Oliver", I will get his id - "123"" in the "OWNER_COPY" field).
Crete regular Text field (OWNER_COPY) and add a rule. but I couldn't find any kind of rule which can fit this case.
Any suggestions?? Thanks in advance :)
Archer can't copy value of RP to anther RP.
I used a custom object for this purpose. The limitation is that the field will be populated only when end user actually interact with a form. The good thing is that the field will be populated instantly.
As an alternative you can use a data feed as Tanveer described above, but in this case there will be a delay between the time when you save the record and population of the 2nd RP field.