I have been attempting to register a OneDrive File Handler as demonstrated on GitHub.
My initial PUT seems to work but I get very flaky results when I attempt to update. I have one domain where the handler works fine but another where I get these problems:
refresh works first time but not subsequently
refresh seems to work but handler not evident in OneDrive
change and update handler but changes not seen when I refresh
Is there any way to work out what is going on? The responses I get in Postman indicate that everything has worked but the file handler is not working.
Here are some observations which may help anyone else who stumbles on this:
the forceRefresh requests seems very patchy, I can make a change in the handler manifest and only some hours later will forceRefresh actually return the changed manifest
don't make the silly mistake I did and change the version in the handler manifest to something other than 2. If you do this the manifest will upload successfully but your handler will never appear. An error response would be much nicer than a silent fail.
I often find that even once forceRefresh has worked the new handler does not appear in my browser. To fix this I go to Local Storage (in the browser dev tools) and remove the entry for 'fileHandlerCache', then do a refresh.
BTW, handlers seem like a great way to extend OneDrive but I have found the developer experience to be pretty rough. Any chance of a smoother ride?
Related
I am currently looking through the options of creating an offline indication for the nuxt/pwa project. Since this moment, app is running perfectly offline, but what I want to do is to push a small notification when there is no connection saying something simple such as "you are currently offline".
I can see that there are multiple ways of doing this such as writing the event listener directly in the default layout, but my question is which one is the most suitable and reliable for the nuxt setup.
I think you don't need to write your own event listener, as this seems to be taken care of by the nuxt already. The network status seems to be accessible via $nuxt helper's isOnline and isOffline properties. Check out this example:
https://nuxtjs.org/api/$nuxt/
I have not worked with this yet, but I think it might be what you are looking for.
Note: Make sure to copy the whole link, as stackoverflow cuts it off at /$nuxt.
We are trying to move from server session (IIS) to Redis-backed session. I updated my web.config with the custom sessionState configuration. I'm finding that only SOME of my key/value pairs are being saved. Of the 5 I expect to be in there, there are only 2. I verified all my code is ultimately hitting HttpContext.Current.Session.Add. I verified that my POCOs are marked as serializable. Looking at monitoring, I see that it adds the first two pairs, then everything after that just doesn't make it. No hit, no rejection, no exceptions. Nothing.
Anyone ever see this? Know where I could start to look to resolve?
TIA,
Matt
Update 1: I've switched to using a JSON serializer to store my data. Same thing. Doesn't seem to be a serialization issue.
Update 2: I've now downloaded the source code, compiled and am debugging it. The method SetAndReleaseItemExclusive, which seems to send the session items to Redis, is only hit once, though it should be hit more than once as my web site handle SSO and bounces from page to page to load the user and such. Have to investigate why it's only firing once...
Figured it out. Turns out that my AJAX request to an "API" endpoint without my MVC app did not have the appropriate session state attached. Therefore, the SetAndReleaseItemExclusive was never called. Adding this fixed it:
protected void Application_PostAuthorizeRequest()
{
if (HttpContext.Current.Request.Url.LocalPath == "/api/user/load")
HttpContext.Current.SetSessionStateBehavior(System.Web.SessionState.SessionStateBehavior.Required);
else
HttpContext.Current.SetSessionStateBehavior(System.Web.SessionState.SessionStateBehavior.ReadOnly);
}
I get the following error within Magento CE 1.6.1.0
Warning: session_start() [<a href='function.session-start'>function.session-start</a>]: Cannot send session cookie - headers already sent by (output started at /home/dev/env/var/www/user/dev/wdcastaging/lib/Zend/Controller/Response/Abstract.php:586) in /home/dev/env/var/www/user/dev/wdcastaging/app/code/core/Mage/Core/Model/Session/Abstract/Varien.php on line 119
when accessing /api/soap/?wsdl
Apparently, a session_start() is being attempted after the entire contents of the WSDL file have already been output, resulting in the error.
Why is magento attempting to start a session after outputting all the datums? I'm glad you asked. So it looks like controller_front_send_response_after is being hooked by Mage_Persistent in order to call synchronizePersistentInfo(), which in turn ends up getting that session_start() to fire.
The interesting thing is that this wasn't always happening, initially the WSDL loaded just fine for me, initially I racked my brains to try and see what customization may have been made to our install to cause this, but the tracing I've done seems to indicate that this is all happening entirely inside of core.
We have also experienced a tiny bit of (completely unrelated) strangeness with Mage_Persistent which makes me a little more willing to throw my hands up at this point and SO it.
I've done a bit of searching on SO and have found some questions related to the whole "headers already sent" thing in general, but not this specific case.
Any thoughts?
Oh, and the temporary workaround I have in place is simply disabling Mage_Persistent via the persistent/options/enable config data. I also did a little bit of digging as to whether it might be possible to observe an event in order to disable this module only for the WSDL controller (since that seems to be the only one having problems), but it looks like that module relies exclusively on this config flag to determine it's enabled status.
UPDATE: Bug has been reported: http://www.magentocommerce.com/bug-tracking/issue?issue=13370
I'd report this is a bug to the Magento team. The Magento API controllers all route through standard Magento action controller objects, and all these objects inherit from the Mage_Api_Controller_Action class. This class has a preDispatch method
class Mage_Api_Controller_Action extends Mage_Core_Controller_Front_Action
{
public function preDispatch()
{
$this->getLayout()->setArea('adminhtml');
Mage::app()->setCurrentStore('admin');
$this->setFlag('', self::FLAG_NO_START_SESSION, 1); // Do not start standart session
parent::preDispatch();
return $this;
}
//...
}
which includes setting a flag to ensure normal session handling doesn't start for API methods.
$this->setFlag('', self::FLAG_NO_START_SESSION, 1);
So, it sounds like there's code in synchronizePersistentInf that assumes the existence of a session object, and when it uses it the session is initialized, resulting in the error you've seen. Normally, this isn't a problem as every other controller has initialized a session at this point, but the API controllers explicitly turns it off.
As far as fixes go, your best bet (and probably the quick answer you'll get from Magento support) will be to disable the persistant cart feature for the default configuration setting, but then enable it for specific stores that need it. This will let carts
Coming up with a fix on your own is going to be uncharted territory, and I can't think of a way to do it that isn't terribly hacky/unstable. The most straight forward way would be a class rewrite on the synchronizePersistentInf that calls it's parent method unless you've detected this is an API request.
This answer is not meant to replace the existing answer. But I wanted to drop some code in here in case someone runs into this issue, and comments don't really allow for code formatting.
I went with a simple local code pool override of Mage_Persistent_Model_Observer_Session to exit out of the function for any URL routes that are within /api/*
Not expecting this fix to need to be very long-lived or upgrade-friendly, b/c I'm expecting them to fix this in the next release or so.
public function synchronizePersistentInfo(Varien_Event_Observer $observer)
{
...
if ($request->getRouteName() == 'api') {
return;
}
...
}
When selenium tries to open popup window I'm getting JS error permission denied in file
file:///C:/DOCUME~1//LOCALS~1/Temp/customProfileDir8708f7f69e14482ba857f4b2e74775c1/core/RemoteRunner.hta
So this break script execution, could you assist? I saw a related topic at MSDN and openqa but didn't find resolution that could help me.
I've just encountered this error. In the end it was because I was running IE in 'Offline' mode. Open the File menu and make sure that "Work Offline" does not have a tick next to it.
I've just updated a section about that in the Selenium docs. The website build is not working right now, so if you go to the site you will find the old version.
I'll paste the raw text here, I think your case is the second: JS trying to access sections that are still not loaded, so your solution would be a waitForPopUp command:
Why am I getting a permission denied
error?
The most common reason for this error
is that your session is attempting to
violate the same-origin policy by
crossing domain boundaries (e.g.,
accesses a page from http://domain1
and then accesses a page from
http://domain2) or switching protocols
(moving from http://domainX to
https://domainX). For this to be
solved, try using the Heightened
Privileges Browsers if you're working
with the Proxy Injection browsers.
This is covered in some detail in the
tutorial. Make sure you read the
sections about The Same Origin Policy
and Proxy Injection carefully.
If the previous situation was not your
case, it can also occur when
JavaScript attempts to look at
objects which are not yet available
(before the page has completely
loaded), or tries to look at objects
which are no longer available (after
the page has started to be unloaded).
This is most typically encountered
with AJAX pages which are working with
sections of a page or subframes that
load and/or reload independently of
the larger page. For this type of
problem, it is common that the error
is intermittent. Often it is
impossible to reproduce the problem
with a debugger because the trouble
stems from race conditions which are
not reproducible when the debugger's
overhead is added to the system. Try
first adding a static pause to make
sure this is the situation and then
moving on to the waitFor kind of
commands.
I have a program that checks if a file is present every 3 seconds, using webrequest and webresponse. If that file is present it does something if not, ect, that part works fine. I have a web page that controls the program by creating the file with a message and other variables as entered into the page, and then creates it and shoots it over to the folder that the program is checking. There is also a "stop" button that deletes that file.
This works well except that after one message is launched and then deleted, when it is launched the second time with a different message the program still sees the old message. I watch the file be deleted in IIS, so that is not the issue.
I've thought about meta tags to prevent caching, but would having the file be dynamically named solve this issue also? How would I make the program be able to check for a file where only the first part of the filename is known? I've found solutions for checking directories on local machines, but that won't work here.
Any ideas welcome, thanks.
I'm not that used to IIS, but in Apache you can create a .htaccess and set/modify HTTP-Headers.
With 'Cache-Control' you can tell a proxy/browser not to cache a file.
http://www.w3.org/Protocols/rfc2616/rfc2616-sec13.html
A solution like this may work in IIS too if it is really a cache problem.
(To test this, open using your preffered browser with caching turned off
A simple hack is to add something unique to the url each time
http://www.yourdomain.com/yourpage.aspx?random=123489797
Adding a random number to the URL forces it to be fresh. Even if you don't use the querystring param, IIS doesnt know that, so executes the page again anyways.