I'm using add_cusmtom_target to do a custom build, but what properties of this target have? Perticually how can I get the list of dependencies listed in the target:
add_custom_target(exsdk COMMAND echo DEPENDS foo.jar bar.jar)
get_target_property(D exsdk DEPENDS)
D is not found, how can I get the properties of custom target?
Related
i have recently switched my stm32 project to CMake to be independent on IDE. Root repository (application) contains multiple submodules (HAL, FreeRTOS etc.) and its CMakeLists.txt includes explicitly every single used file:
set(EXECUTABLE ${PROJECT_NAME}.elf)
add_executable(${EXECUTABLE}
# Own sources
src/main.c
src/SEGGER_SYSVIEW_Config_FreeRTOS.c
src/startup_stm32h723zgtx.s
src/stm32h7xx_hal_timebase_tim.c
src/system_stm32h7xx.c
# Base CMSIS and HAL library
lib-hal/stm32h7xx/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c
lib-hal/stm32h7xx/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c
lib-hal/stm32h7xx/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c
lib-hal/stm32h7xx/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c
lib-hal/stm32h7xx/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c
#long list of HAL c files there...
# FreeRTOS library
lib-freertos/croutine.c
lib-freertos/event_groups.c
lib-freertos/list.c
lib-freertos/queue.c
lib-freertos/stream_buffer.c
lib-freertos/tasks.c
lib-freertos/timers.c
lib-freertos/portable/GCC/ARM_CM7/r0p1/port.c
lib-freertos/trace/Sample/FreeRTOSV10/SEGGER_SYSVIEW_FreeRTOS.c
lib-freertos/trace/SEGGER/Syscalls/SEGGER_RTT_Syscalls_GCC.c
lib-freertos/trace/SEGGER/SEGGER_RTT_ASM_ARMv7M.S
lib-freertos/trace/SEGGER/SEGGER_RTT_printf.c
lib-freertos/trace/SEGGER/SEGGER_RTT.c
lib-freertos/trace/SEGGER/SEGGER_SYSVIEW.c
)
target_include_directories(${EXECUTABLE}
PRIVATE
include
src
lib-hal/stm32h7xx/CMSIS/Include
lib-hal/stm32h7xx/CMSIS/Device/ST/STM32H7xx/Include
lib-hal/stm32h7xx/STM32H7xx_HAL_Driver/Inc
lib-freertos/include
lib-freertos/trace/Config
lib-freertos/trace/SEGGER
lib-freertos/trace/Sample/FreeRTOSV10/
lib-freertos/portable/GCC/ARM_CM7/r0p1
)
This solution works but i know it is not a sustainable approach. So i tried to create library in lib-hal and lib-freertos submodules, specifying their sources and includes
add_library(lib-hal-stm32h7xx)
target_include_directories(lib-hal-stm32h7xx
PUBLIC
CMSIS/Include
CMSIS/Device/ST/STM32H7xx/Include
STM32H7xx_HAL_Driver/Inc
PRIVATE
STM32H7xx_HAL_Driver/Src
)
target_sources(lib-hal-stm32h7xx
PRIVATE
STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c
STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c
STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c
STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c
STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c
#long list of HAL c files there...
)
and then using
add_subdirectory(lib-hal/stm32h7xx)
add_subdirectory(lib-freertos)
and
target_link_library(${EXECUTABLE} lib-freertos lib-hal-stm32h7xx)
to "import" submodules into application project. But when building the executable, gcc cannot access files stm32h7xx_hal_conf.h and FreeRTOSConfig.h which are located in root directory include. I do not want to put configuration headers into submodules because they are used in multiple projects with different configurations. Is it possible to somehow extend already specified directory search scope for library after adding it into parent project?
File structure of project:
-src
-include (configuration for lib-hal and lib-freertos included there)
-lib-hal
-includes...
-sources...
-lib-freertos
-includes...
-sources...
Thanks in advance for response.
As Tsyvarev mentioned in the comments, you can modify the properties of the target in your project. To keep things clean, I usually create a function for this and place it in a separate file.
Tip: you can also add source files to the target. In case of FreeRTOS, you could add architecture-specific files, in case all your projects don't run on the same MCU family.
function(configure_freertos target_name)
target_sources(${target_name}
PRIVATE
lib-freertos/portable/GCC/ARM_CM7/r0p1/port.c
)
target_include_directories(${target_name}
PUBLIC
include
lib-freertos/portable/GCC/ARM_CM7/r0p1
)
endfunction()
Running
val myAvroObject = MyAvroObject.newBuilder()
results in a compilation error:
Cannot access class 'MyAvroObject.Builder'. Check your module classpath for missing or conflicting dependencies
I am able to access other MyAvroObject variables. More precisely, methods such as
val schema = MyAvroObject.getClassSchema()
val decoder = MyAvroObject.getDecoder()
compiles fine. What makes it even stranger is that I can access newBuilder() in my test/ folder, but not in my src/ folder.
Why do I get a compile error when using newBuilder()? Is the namespace of the avro-schema used to generate MyAvroObject of importance?
Check your module classpath generally means, that your dependencies (which you didn't provide) are messed up. One of them should read implementation instead of testImplementation, in order to have the method available in the main source-set, instead of only the test source-set - but this may well have to do with the input classes, the output location of generated classes, or annotations alike #VisibleForTesting (just see what it even generates). Command gradlew can also list the dependencies per configuration. The builder seems to be called org.apache.avro.SchemaBuilder... there's only avro-1.11.0.jar & avro-tools-1.11.0.jar. With the "builder" design pattern, .newBuilder() tries to return inner class Builder.
had the same problem today and was able to solve it by adding the following additional source folder
<sourceDir>${project.basedir}/target/generated-sources/avro</sourceDir>
to the kotlin-maven-plugin.
As the title states, is there a 'neat' way to set per configuration linker flag? It is not possible for me to use target_link_options() since I'm trying to link into a static library. Ideally, what I would want to achieve is to set Visual Studio's Librarian -> Additional Dependencies and Additional Library Directories and achieve the same result in XCode as well.
Here is what I've achieved so far:
set(LIB_LINKS_RUNTIME
${Vulkan_LIBRARIES}
${CMAKE_SOURCE_DIR}/bin/$<CONFIGURATION>/SDL2maind.lib
${CMAKE_SOURCE_DIR}/bin/$<CONFIGURATION>/SDL2d.lib
${CMAKE_SOURCE_DIR}/bin/$<CONFIGURATION>/imgui.lib
)
foreach(lib ${LIB_LINKS_RUNTIME})
set (CMAKE_STATIC_LINKER_FLAGS "${CMAKE_STATIC_LINKER_FLAGS} ${lib}")
endforeach()
According to https://cmake.org/cmake/help/latest/prop_tgt/STATIC_LIBRARY_OPTIONS.html STATIC_LIBRARY_OPTIONS property does the trick
set_property(TARGET Runtime PROPERTY STATIC_LIBRARY_OPTIONS ${LIB_LINKS_RUNTIME})
I have two targets (among others) in my build script - BuildApp and Deploy. Deploy target function needs to get a package, which is generated by BuildApp target. However, BuildApp target should not always create this package, since it is only required if the final target is Deploy.
My question is if there any way to detect, what is the final specified target (or all targets list) for the current run, inside the target function, so in BuildApp I can have a condition to create a package only if final target (or target list) contains "Deploy" string.
I am trying to update Microsoft.Cpp.Win32.user property sheet, in which planning to update below mentioned settings.
1. c++ -> General -> optimization -> optimization = Disabled (/Od).
2. Linker -> General -> output directory = C:\BuildPath.
To complete above mentioned task I have updated existing Microsoft.Cpp.Win32.user property files in VS 2013. But I am getting a problem, when some projects are having manual output directory project setting (i.e. D:\BuildProjectPath) and those project outdir is not getting updated from Microsoft.Cpp.Win32.user property files. to update these setting i have to manually select .
let me know how can we resolve this issue.