Rabbitmq server failed to boot - rabbitmq

I'm trying to start my rabbitmq server using command:sudo rabbitmq-server on ubuntu 20.04 but it crashes.I have absolutely no clue whatsoever as to what I should do.
Rabbitmq version: 3.8.5 erlang version: 23
17:41:07.587 [error]
17:41:07.591 [error] BOOT FAILED
BOOT FAILED
17:41:07.592 [error] ===========
===========
17:41:07.592 [error] ERROR: distribution port 25672 in use by rabbit#nadaanbaalak
ERROR: distribution port 25672 in use by rabbit#nadaanbaalak
17:41:07.592 [error]
17:41:08.594 [error] Supervisor rabbit_prelaunch_sup had child prelaunch started with rabbit_prelaunch:run_prelaunch_first_phase() at undefined exit with reason {dist_port_already_used,25672,"rabbit","nadaanbaalak"} in context start_error
17:41:08.594 [error] CRASH REPORT Process <0.153.0> with 0 neighbours exited with reason: {{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","nadaanbaalak"}}},{rabbit_prelaunch_app,start,[normal,[]]}} in application_master:init/4 line 138
{"Kernel pid terminated",application_controller,"{application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,\"rabbit\",\"nadaanbaalak\"}}},{rabbit_prelaunch_app,start,[normal,[]]}}}"}
Kernel pid terminated (application_controller) ({application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","nadaanbaalak"}}},{rabb
Crash dump is being written to: erl_crash.dump...done
Any help would be great

It's pretty simple. Just needed to look at the logs. killed the process at the port number "25672" and restarted the rabbitmq server.

Related

RabbitMQ crashes saying port occupied

I am trying to open RabbitMQ for the first time so I can use celery. I am trying to run the 'rabbitmq-server' file as administrator, however this error pops up every time I press run. I saw another stackOverflow post with the same issue, however the sole comment suggested that I kill what was happening at the port.
I followed this tutorial to kill the port, however the same issue persisted. I do not know what else to try to fix this issue. Thanks for any help
https://community.talend.com/s/article/How-to-find-and-kill-a-process-running-on-a-port-LVJkZ
Configuring logger redirection
11:26:13.229 [warning] Using RABBITMQ_ADVANCED_CONFIG_FILE: c:/Users/zoommen/AppData/Roaming/RabbitMQ/advanced.config
11:26:15.481 [error]
11:26:15.481 [error] BOOT FAILED
BOOT FAILED
11:26:15.481 [error] ===========
===========
11:26:15.481 [error] ERROR: distribution port 25672 in use by another node: rabbit#X390-zoommen
ERROR: distribution port 25672 in use by another node: rabbit#X390-zoommen
11:26:15.481 [error]

run rabbitmq on windows

I was using rabbitmq on Windows about 6 months ago, now I am reinstalling rabbitmq and erlang but I get this error:
C:\Program Files\new_RabbitMQ Server\rabbitmq_server-3.8.12\sbin>rabbitmq-server
Configuring logger redirection
12:49:39.059 [warning] Using RABBITMQ_ADVANCED_CONFIG_FILE: c:/Users/ALFA RAYAN/AppData/Roaming/RabbitMQ/advanced.config
12:49:39.810 [error]
BOOT FAILED
12:49:39.810 [error] BOOT FAILED
===========
12:49:39.810 [error] ===========
ERROR: distribution port 25672 in use by another node: rabbit#Ali
12:49:39.810 [error] ERROR: distribution port 25672 in use by another node: rabbit#Ali
12:49:39.810 [error]
12:49:40.826 [error] Supervisor rabbit_prelaunch_sup had child prelaunch started with rabbit_prelaunch:run_prelaunch_first_phase() at undefined exit with reason {dist_port_already_used,25672,"rabbit","Ali"} in context start_error
12:49:40.826 [error] CRASH REPORT Process <0.150.0> with 0 neighbours exited with reason: {{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","Ali"}}},{rabbit_prelaunch_app,start,[normal,[]]}} in application_master:init/4 line 138
{"Kernel pid terminated",application_controller,"{application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,\"rabbit\",\"Ali\"}}},{rabbit_prelaunch_app,start,[normal,[]]}}}"}
Kernel pid terminated (application_controller) ({application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","Ali"}}},{rabbit_prelau
Crash dump is being written to: erl_crash.dump...done
i use otp_win64_23.2 and rabbitmq-server-3.8.12
Go to windows services and look for RabbitMQ. Right click on it and stop the service.
Restart the RabbitMQ server in an administrator mode. This worked for me.

can't start rabbitmq-server after installation on windows

I try to run this 'rabbitmq-server' command in my cmd but that give me this error ...
Configuring logger redirection
13:44:01.865 [warning] Using RABBITMQ_ADVANCED_CONFIG_FILE: c:/Users/saikat/AppData/Roaming/RabbitMQ/advanced.config
13:44:02.838 [error]
13:44:02.838 [error] BOOT FAILED
BOOT FAILED
13:44:02.838 [error] ===========
===========
13:44:02.838 [error] ERROR: distribution port 25672 in use by another node: rabbit#DESKTOP-1I7H1RC
ERROR: distribution port 25672 in use by another node: rabbit#DESKTOP-1I7H1RC
13:44:02.838 [error]
13:44:03.839 [error] Supervisor rabbit_prelaunch_sup had child prelaunch started with rabbit_prelaunch:run_prelaunch_first_phase() at undefined exit with reason {dist_port_already_used,25672,"rabbit","DESKTOP-1I7H1RC"} in context start_error
13:44:03.840 [error] CRASH REPORT Process <0.152.0> with 0 neighbours exited with reason: {{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","DESKTOP-1I7H1RC"}}},{rabbit_prelaunch_app,start,[normal,[]]}} in application_master:init/4 line 138
{"Kernel pid terminated",application_controller,"{application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,\"rabbit\",\"DESKTOP-1I7H1RC\"}}},{rabbit_prelaunch_app,start,[normal,[]]}}}"}
Kernel pid terminated (application_controller) ({application_start_failure,rabbitmq_prelaunch,{{shutdown,{failed_to_start_child,prelaunch,{dist_port_already_used,25672,"rabbit","DESKTOP-1I7H1RC"}}},{r
Crash dump is being written to erl_crash.dump...done
No doubt you have already resolved this, but for anyone else this may help I had the same issue on Windows and managed to resolve it by doing the followed.
Open powershell as admin in *\rabbitmq_server-3.8.9\sbin*
Stop the service by running: .\rabbitmq-service.bat stop
Start the service by running: .\rabbitmq-server.bat
If you are on windows then go to Services
Search RabbitMq and Right click
Stop service
Open cmd as administrator
run cd C:\Program Files\RabbitMQ Server\rabbitmq_server-3.8.17\sbin
and then run rabbitmq-server
For me what I did was killing the process of erl from the task manager and then running the command:
rabbitmq-server.bat

FATAL org.apache.hadoop.hbase.master.HMaster Unhandled exception. Starting shutdown

I have 4 nodes CentOS hadoop cluster. I installed cloudera manager 5.5.1.
I failed to start Hbase Master.
FATAL org.apache.hadoop.hbase.master.HMaster Unhandled exception.
Starting shutdown
.
Caused by:
org.apache.hadoop.ipc.RemoteException(org.apache.hadoop.security.AccessControlException):
Permission denied: user=hbase, access=WRITE,
inode="/":hdfs:supergroup:drwxr-xr-x
Any thoughts?
Thanks

RabbitMQ-server problems on CentOS 6

i have problem with running rabbitmq-server on CentOS 6.
Im getting such message while trying to start rabbitmq-server:
starting networking ...BOOT ERROR: FAILED
Reason: {badmatch,
{error,
{shutdown,
{child,undefined,'rabbit_tcp_listener_sup_:::5672',
{tcp_listener_sup,start_link,
[{0,0,0,0,0,0,0,0},
5672,
[inet6,binary,
{packet,raw},
{reuseaddr,true},
{backlog,128},
{nodelay,true},
{exit_on_close,false}],
{rabbit_networking,tcp_listener_started,[amqp]},
{rabbit_networking,tcp_listener_stopped,[amqp]},
{rabbit_networking,start_client,[]},
"TCP Listener"]},
transient,infinity,supervisor,
[tcp_listener_sup]}}}}
Stacktrace: [{rabbit_networking,start_listener0,4},
{rabbit_networking,'-start_listener/4-lc$^0/1-0-',4},
{rabbit_networking,start_listener,4},
{rabbit_networking,'-boot_tcp/0-lc$^0/1-0-',1},
{rabbit_networking,boot_tcp,0},
{rabbit_networking,boot,0},
{rabbit,'-run_boot_step/1-lc$^1/1-1-',1},
{rabbit,run_boot_step,1}]
Erlang has closed
{"Kernel pid terminated",application_controller,"{application_start_failure,rabbit,{bad_return,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot}}}}}"}
Crash dump was written to: erl_crash.dump
Kernel pid terminated (application_controller) ({application_start_failure,rabbit,{bad_return,{{rabbit,start,[normal,[]]},{'EXIT',{rabbit,failure_during_boot}}}}})
In rabbitmq-env.conf i have:
NODENAME=main
CONFIG_FILE=/etc/rabbitmq/
Also in rabbitmq.config i have:
[
{rabbit, [{tcp_listeners, [{"0.0.0.0", 5672}]}]}
].
Hmm? Does anyone know where is the problem?
Thanks in advance