I work with some PDF's, and need automatized trimming of PDF content. in separate layers i have image and outlines, and i want to trim interior of that outlines from image.
Image layer is drawing that consist of different colors
Outline is always red, closed contour.
Is it possible or not?
If yes, what language/framework should i use?
Thx in advance
ex. image with outline
Related
Can anyone tell why the image in this pdf does not display as 100% Cyan?
clrtestc - NOPREBLEND32.PDF
Warning: I probably know just enough about pdf and colour to be dangerous!
I'm pretty sure each colour plane of the image is in a separate image. Here's a blended version if that helps.
I know the ColorSpace is DeviceCMYK
I'm pretty sure there is only 100% Cyan in the image, at least there was when it went into the PDF converter.
What went in:
CMYK: 100,0,0,0
RGB: 0,255,255
What I measure coming out:
CMYK: 100,27,0,6
RGB: 0,173,238
I'm foxed! Is there some filter affecting the rendering of the PDF?
There's also Magenta, Yellow and Black versions if they help.
Any help much appreciated.
The PDF file is extraordinarily complicated, it has numerous Forms, some of them nested, most of which are empty. However there only appears to be one image, which is defined in an Indexed CMYK space. So as far as I can see, this is indeed a 100% cyan image.
The extended graphics state does use the Multiply Blend mode, and there is no group and no page group specified, so the colour space used for the blending will depend on the colour model of the output device. If that's a monitor, then it's entirely possible that the resulting output will be RGB.
That's because your CMYK image needs to be converted to RGB in order to be blended using that colour space.
Incidentally, the image is in an Indexed colour space. In your image all the image samples have the same value, that value is then consulted in a lookup table, and that table returns the CMYK components. So no, there is not one image per colour plane, or at least, not in this file.
To be honest, you're going to have to explain better how you are evaluating the content of the PDF file. As far as I can see the image is 100% cyan, and when rendered to a CMYK device, it will remain 100% cyan. If you render to an RGB device, it will be converted to RGB. A poor quality PDF consumer might decide to convert to RGB in the absence of a defined colour space for the blending operation.
Since the blending mode doesn't actually do anything (there's no defined alpha, SMask or any other transparency in the file) you could remove that and see if it sorts out your problem.
Edit
Your screen will be an RGB device, so no matter what the CMYK values in the PDF file are, there won't be any CMYK in the screenshot. The PDF rendering engine will have to convert the CMYK to RGB.
So the PDF rendering engine performs an opaque CMYK->RGB conversion. Then you take a picture of that RGB screen. You load that into an image editing application, and ask it what the RGB values are and presumably what it thinks are the CMYK equivalents.
If the CMYK->RGB calculation that the PDF viewer performs is not the inverse of the calculation that the RGB->CMYK image application performs, then you won't be getting the right values!
There's no way to predict what the RGB intermediate values 'should' be, because there is no 'right' answer here. Fundamentally this isn't a reliable technique for evaluating the colour.
It's hard to make any kind of recommendation without knowing what you are trying to achieve (and possibly why), and what tools you are prepared to use. I believe Acrobat Pro would allow you to look at the colour values directly for example. Or you could use something like Ghostscript to create a CMYK TIFF file, then open that in an image application which supports CMYK (like Photoshop) and look at the values there.
But rendering to the screen, taking a screenshot and trying to figure out what the CMYK values might or might not have been is not really going to work.
I have about 400 pdfs with a lot of dead space between the text and the page border.
Usually I'm using govert's pdf cropper to crop all the whitespace, but this time the pdf background color is (darn!) yellow,
and no software which I know (and I've searched for quite a while) can crop non-whitespace
(well, except maybe pdfcrop.pl -a Pearl library which supposedly can remove black spaces).
Anybody knows of a software that can perform such task?
The ideal app, I guess, would have the option to receive specific color to remove,
like rgb(192,192,192).
Thanks in advance.
The reason this is so difficult is that PDF has no concept of paper color or background color. So what you're seeing is not a different background color, but an object (typically a rectangle) painted in that yellow background color.
Most cropping tools simply calculate the bounding box of all objects on the page and then crop away everything outside that bounding box. Of course that doesn't work for your file because the bounding box will include the background rectangle object.
There are potentially a number of directions you could take this:
1) If all pages need to be cropped by the same amount, you could attempt to do cropping that way (simply passing a rectangle to the cropping tool to do the actual cropping).
2) There are tools (callas pdfToolbox - watch it, I'm associated with this tool, Enfocus PitStop...) that allow you to remove objects from a document and this could be done by specifying your yellow color. This would allow you to modify the PDF file by removing the background object and then perform the cropping you want to perform.
Is it possible to invert the colors within a box (4 sets of coordinates) on a page from within the page's content object code?
My pages consist of simple B&W JBIG2 images and I wish to make the white black and the black white within a small box to highlight something.
As mkl suggests, you may extract the images and change their bits - this might prove to be a little bit of work however. There might be another useful approach here, specifically useful because it would work regardless of what the underlying objects are.
It is possible in PDF to add a transparent object (for example a rectangle) over all underlying objects. In your case you would create a rectangle that you put on top of the images you already have in the page stream.
If you paint this rectangle in white, set it to transparent and choose "Difference" as the transparency blending mode, the net effect should be that the colors underneath your rectangle are inverted.
From the PDF specification: "Painting with white inverts the backdrop colour; painting with black produces no change."
This may be the quickest and most painless way to accomplish what you are looking for...
I am trying to convert a pdf into tif using ghost script. Is it possible to remove the background (grey color) of a text block (back font color) in a pdf using ghost script? I would like to replace the grey background to white.
Appreciate your help!!
I don't think you'll get a generic solution to your problem because there are many different ways such a background may be coded in your PDF and there is no sure way to distinguish such a background from a rectangular form of some vector image.
PDF essentially offers a set of tools for positioning glyphs and vector graphics in some rectangle (page) to display and some additional tools to add some interactivity (e.g. forms). Thus, a colored background in a PDF generally is created by drawing a line along the edge of the area of the background, fill this form with the desired color, and position glyphs and graphics (text and images) atop it. There are other operators, too, which can be used, though, and many variants of their use, and generally the form created is not marked as background.
In the answer Dingo refers to in his comment a rectangle covering the whole page, actually even a bit more (in case of a fairly common choice of a media box), is drawn (m: move to a corner; 4*l: draw the 4 edge lines; h: close the path; f fill the form).
Thus, please make the PDF in question available for inspection, maybe there is some specific solution for your file.
I am a coder but not a graphic maker. I can decently produce graphics that meet the quality standards visually although I cannot produce graphics that will technically "work." This is what I mean:
I am using CGRectIntersectsRect for colliding images. My image has SOME extra space which I have made completely transparent using Adobe PhotoShop but even if this extra transparent space is not visible, when the two images collide, it will look like you will be hitting nothing as this extra invisible transparent space is PART of the image and when CGRectIntersectsRect is called it detects touch between two images. So if the other image touches the transparent space, CGRectIntersectsRect is called and my code is executed. I only want my code to be executed if it hits the actual COLOR space of the image. Here is two things that could help me through that, they follow through with questions.
Learn how to make NO EXTRA SPACE on an image in photoshop. How could I do this, tutorials?
CGRectIntersectsRect only called when touching a color part of an image. A way to do this?
Thank you guys!
Regarding your question #1, it depends. All images are rectangular, all. So, if your sprite is rectangular, you can crop it in Photoshop to just the rectangular area. But if you want to handle, say, a circle ball, then you can't do such thing as "remove extra space". Your circle ball will always be stored in a rectangular image, with transparent space on the corners.
Learn how to make NO EXTRA SPACE on an image in photoshop. How could I do this, tutorials?
You can manually select an area using the Rectangular Marquee Tool and Image > Crop or automatically trim the image based on an edge pixel color using Image > Trim.
CGRectIntersectsRect only called when touching a color part of an image. A way to do this?
You can use pixel-perfect collisions or create better bounding shapes for your game objects. For example, instead of using pixel-perfect collision for a spaceship like this one, you could use a triangle for the wings, a rectangle for the body, and a triangle for the head.
Pixel-perfect collision
One way you could implement it would be to
Have an blank image in memory.
Draw visible pixels from one image in blue (#0000ff).
Draw visible pixels from the other image in red (#ff0000).
If there's any purple pixels in the image (#ff00ff), then there's an intersection.
Alternative collision detection solution
If your game is physics-based, then you can use a physics engine like Box2D. You can use circles, rectangles, and polygons to represent all of your game objects and it'll give you accurate results without unnecessary overhead.
For collision detection for non-rectangular shapes, you should look into one of the many game and/or physics libraries available for iOS. Cocos2d coupled with Box2d or chipmunk are popular choices.
If you want to do it yourself, you'll need to start with something like a custom CGPath tracing the actual shape of each object, then use a function like CGPathContainsPoint (that's from memory, it may be wrong). But it is not a simple job. Angry birds uses box2d, AFAIK.