i have a Textbox in vb.net and have assigned to it autocomplete data , when i enter the first letter of the word it shows a suggestions but when i choose one and click tab to complete the word it goes to next text box
for example :
i have put these suggestion as a source for the textbox
GigabitEthernet
but i want to complete it with a number , so i have to click tab and complete
i have tried all types of auto complete with no luck
is it doable to complete the word when i click in tab without going to the next box?
Try this code
Private Sub TextBox1_PreviewKeyDown(sender As Object, e As PreviewKeyDownEventArgs) Handles TextBox1.PreviewKeyDown
If e.KeyCode = Keys.Tab Then e.IsInputKey = True
End Sub
Related
I'm not sure if it is possible, but I would like to know if a listbox can be updated by adding or removing text by typing that text into a textbox without using a button event or some type of click event. I've tried using the text_changed event but it inserts the text as I type so I am unable to type an entire string and then move that into a listbox as a whole string.
What I am trying to do is scan a magnetic ID card through a reader and have it insert the data from that card into a listbox and when I scan the same card again, it will remove the data. This is for an employee logging system.
Thanks.
With the following code, if you type a string in TextBox1 and hit Enter, we check to see if the string already exists in ListBox1. If so, the string is removed from the ListBox, otherwise it is added. Then TextBox1 is cleared.
Private Sub TextBox1_KeyPress(sender As Object, e As KeyPressEventArgs) Handles TextBox1.KeyPress
If e.KeyChar = vbCr Then
If ListBox1.Items.Contains(TextBox1.Text) Then
ListBox1.Items.Remove(TextBox1.Text)
Else
ListBox1.Items.Add(TextBox1.Text)
End If
TextBox1.Clear()
e.Handled = True
End If
End Sub
I'm using an UltraGrid which has a ContextMenuStrip with 2 items. These are shown when right-clicking an UltraGridCell.
However, in order to show them, the user has to first click off the cell to take it out of edit mode, then right click on it to show the ContextMenuStripItems.
This has become confusing and irritating to the user, so I was wondering if there is any way that it can be changed to show them when right clicking whilst still in edit mode?
I've tried this to take it out of edit mode after a key is pressed, but it doesn't work.
Private Sub ugComm_keyup(sender As Object, e As KeyEventArgs) Handles ugComm.KeyUp
ugComm.UpdateData()
If ugComm.ActiveCell.IsInEditMode = True Then
ugComm.ActiveCell.Row.Update()
End If
End Sub
I also tried something in the MouseClick that was suggested on the Infragistics forums, but again it didn't work.
Is there any way that a user right-clicking a cell that is in edit mode can bring up the ContextMenuStripItems rather than this menu?
The above image shows what is currently show when right-clicking a cell in edit mode (The cell is the bottom right white cell). I don't want this to appear, but the CMS instead.
EDIT
I've tried the suggestions in the current answers, but neither of those worked for me. Possibly because the grids are a slightly older version?
My most recent effort was done with the following code:
Private Sub ugComm_MouseDown(sender As Object, e As MouseEventArgs) Handles ugComm.MouseDown
If e.Button = Windows.Forms.MouseButtons.Right Then
Me.cmCommRate.Show(mouseX, mouseY)
End If
End Sub
But this wasn't triggered until the cell was no longer in edit mode.
NEITHER OF THE ANSWERS BELOW RESOLVE THE ISSUE. STILL NEEDS AN ANSWER
When any cell of the grid enters in edit mode a TextBox is drawn over the cell. The nice part here is this text box is reused for all the cells in the grid. When you right click on the cell in edit mode the default context menu, that comes from MS, shows. What you need to do is get this text box and assign it your context menu strip. You can do this by handling ControlAdded event of the grid like this:
' create a field to store the TextBox
Private cellTextBox As TextBox
Private Sub grid_ControlAdded(sender As Object, e As ControlEventArgs) Handles grid.ControlAdded
' Check if added control is TextBox
If TypeOf e.Control Is TextBox Then
' If added control is TextBox store it in your private field and set its ContextMenuStrip
If Me.cellTextBox Is Nothing Then
Me.cellTextBox = DirectCast(e.Control, TextBox)
Me.cellTextBox.ContextMenuStrip = Me.ctx
End If
End If
End Sub
I have tried to write an event handler for the MouseUp event with this code
Private Sub grid_MouseUp(sender As Object, e as MouseEventArgs) Handles grid.KeyUp
grid.PerformAction(UltraGridAction.ExitEditMode)
grid.ContextMenuStrip.Show()
End Sub
and it works.
The ContextMenuStrip was added in code with this text (as example)
ContextMenuStrip ctx = new ContextMenuStrip()
ctx.Items.Add("Test1")
ctx.Items.Add("Test2")
ctx.Items.Add("Test3")
grid.ContextMenuStrip = ctx
I write this code for tab-like behavior when user presses ENTER on textboxes for every form, which works fine.
If e.KeyChar = Microsoft.VisualBasic.ChrW(Keys.Return) Then
SendKeys.Send("{TAB}")
e.Handled = True
End If
However, I need to write the code once, perhaps as a sub or function in a module so that I do not have to write the same for every form. I have checked various forums including
Detecting Enter keypress on VB.NET and
Tab Key Functionality Using Enter Key in VB.Net
BUT all I get is either to write code for each textbox or for every individual form.
Has anyone tried out a single code for ALL or may be several selected forms of the application? If yes, please share with me. Writing for every form still works fine for me but i need to take advantage of OOP. Thanks
There are many ways to implement this, one of those is to create a custom textbox User Control
Adding a control to your project is very easy just right click in your project in the solution explorer ->Add->User Control
Give a name to your control ex. "tabedtextbox"
Add a textbox control to your User Control
Place the code in the keypress event of textbox1 of the UserControl
Private Sub TextBox1_KeyPress(sender As Object, e As KeyPressEventArgs) Handles TextBox1.KeyPress
If e.KeyChar = Microsoft.VisualBasic.ChrW(Keys.Return) Then
SendKeys.Send("{TAB}")
e.Handled = True
End If
End Sub
Compile once in order to update the whole project with the new user control.
Goto to your form and add your new User Control, you can locate it at the Toolbox panel.
Run your program and you will see the behavior of TAB when you press enter on each textbox.
If You wish to allow the user to press enter in a TextBox, instead of pressing a specific button,
you can use the acceptbutton property.
One good way to use it, is to change the property, on the Enter and Leave events of the TextBox. That you call Click event of the Button, when User press Enter inside the TextBox.
Try this code:
Private Sub tbProject_Enter(sender As Object, e As EventArgs) Handles tbProject.Enter
Me.AcceptButton = bSearch
End Sub
Private Sub tbProject_Leave(sender As Object, e As EventArgs) Handles tbProject.Leave
Me.AcceptButton = Nothing
End Sub
Private Sub bSearch_Click(sender As Object, e As EventArgs) Handles bSearch.Click
'.... actions to perfom
End Sub
Screen
I have Two text Boxes named Text1,text2.Once I finished the value input into Text1 I would like to move the cursor automatically to Tex2.I don't like to put a maximum length for Text1,
The valued finished indication I would like in Text1 is Mouse click out of Text1.
Please help me to code it in vb.net
You need to set focus to the textbox2 on textbo1's lost focus event
Private Sub TextBox1_LostFocus(sender As Object, e As System.EventArgs) Handles TextBox1.LostFocus
TextBox2.Focus()
End Sub
or in other ways :
in form load put the code like this :
TextBox1.TabIndex = 0
TextBox2.TabIndex = 1
Reference:
GotFocus :Occurs when the control receives focus (occur when Cursor inside the textbox)
LostFocus :Occurs when the control loses focus(occur when Cursor leaves thetext box)
then simply you can redirect to the textbox2 from textbox1 by clicking the tab key
I want to be able to edit/delete/insert lines of text from a textfile by using listbox and textbox.
I want to display all the contents of the textfile per line in a listbox and when I click a line of text it will then display it in the textbox giving me the option to either edit or delete that line of text.
My insertion of text would be inserted after the last line of text being displayed in the listbox. Is this possible? I just want a starting point and I will continue it from there. Thanks in advance.
Here is an answer with a listview , button 9 is to fill Listview, listview click sends the text to textbox and button 10 saves it back to the listview
This is probably the simplest way to do what you want to achieve.
Private Sub Button9_Click(sender As Object, e As EventArgs) Handles Button9.Click
ListView1.HeaderStyle = ColumnHeaderStyle.None
ListView1.HideSelection = False
For i As Integer = 0 To 50
ListView1.Items.Add("Line number" & i.ToString)
Next
End Sub
Private Sub ListView1_SelectedIndexChanged(sender As Object, e As EventArgs) Handles ListView1.Click
TextBox8.Text = ListView1.SelectedItems(0).Text
End Sub
Private Sub Button10_Click(sender As Object, e As EventArgs) Handles Button10.Click
ListView1.SelectedItems(0).Text = TextBox8.Text
End Sub
Probably a good starting point for you anyway and expand this code from here on.
Yes. It is possible. I would suggest to use already existing text editors rather than re-inventing the wheel. If you still want to go ahead and create a new one from start, then you can try the following.
Create a window form application in vb.net with ListBox control for showing the lines, a textbox control for entering the file name, a button to browse to the given file, a button on clicking on which the file content should get loaded. Refer file objects for this.
Utilise ContextMenu class in vb.net to allow right click to read selected listbox line and accordingly perform add/delete/edit operation by modifying the selected listitem value.