I use the mlt framework to convert aac to flac files,and the code as follows:
'''
consumer.set("acodec", "flac");
consumer.set("ab","1030k");
consumer.set("ar",44100);
consumer.set("channels",2);
'''
but the time of flac file is wrong.
I solved this problem. add a code follows:
consumer.set("f","matroska");
and output file's time is normal
Related
I am new to geospatial analytics and using NetCDF and GeoTIFF files. I am trying to convert the NetCDF file into GeoTIFF file. I came across this reference: netcdf-to-geotiff-file-conversion. I have successfully installed and can run gdal_translate in my MacOS terminal. However, I get this message I am trying to understand what this means and what I am missing? This appears to be warning, however it didn't generate any output.
My code executed:
gdal_translate some_nc_file_name.nc output.tif
Error/Message:
Warning 1: No UNIDATA NC_GLOBAL:Conventions attribute
Input file contains subdatasets. Please, select one of them for reading.
Here is my data output I previewed in Python:
You appear to have multiple variables in the file, so need to select one. Example (following https://nsidc.org/support/how/how-convert-golive-netcdf-variables-geotiff).
gdal_translate NETCDF:"Input_FileName.nc":variable_name Output_FileName.tif
Based on the warning message, the netCDF file lacks certain important attributes, so some issues may exist with the coordinates etc. in the tif.
Can someone give me the script I would need to run to batch convert many *.jpeg files to *.png in Script.Fu in GIMP?
Currently I am spending way too much time manually exporting every image and it's a waste of time.
I can't install anything right now so can't use alternative applications.
Alright, after a lot of trials and errors I finally figured out how to convert one file format to another using only GIMP.
This is the Script-Fu script for conversion to PNG:
(
let* ((filename "{{filename}}")
(output "{{output}}")
(image (car (gimp-file-load 1 filename filename)))
(drawable (car (gimp-image-get-active-layer image))))
(file-png-save-defaults 1 image drawable output output)
)
Where {{filename}} is input file that needs to be converted (a jpeg file, for example), {{output}} is the output file that you need (it can be simply the same file name but with PNG extension)
How to run it: it can probably be improved
gimp -i -n -f -d --batch "{{one-line script-fu}}"
More about command line options you can find in GIMP online documentation.
The place that needs to be changed is {{one-line script-fu}} and it has to be... one-line! You can probably do all of this in one file using cmd (in case if you use Windows), but for me it was easier to use Python, so here's the script for it:
import subprocess, os
def convert_to_png(file_dds):
#Loads the command to run gimp cli (second code block)
#Note: remove "{{one-line script-fu}}" and leave one space after the --batch
with open("gimp-convert.bat", "r") as f:
main_script = f.read()
#Prepares the Script-Fu script to be run, replacing necessary file names and makes it one-line (the firs code block)
with open("gimp-convert-png.fu", "r") as f:
script = f.read().replace("\n", " ").replace("{{filename}}", file_dds) \
.replace("{{output}}", file_dds[:-3]+"PNG").replace("\\", "\\\\").replace("\"", "\\\"")
subprocess.run(main_script + " \"" + script + "\" --batch \"(gimp-quit 1)\"",
cwd = os.getcwd(),
shell = True)
And you should get your file converted to PNG!
I needed this for my texture upscale project, all of the code below you can find here.
Tested with GIMP 2.10
The real solution is to use ImageMagicks convert, as simple as magick convert some.jpeg some.png. There must be a "portable" version somewhere that you can use off a USB key.
Otherwise with Gimp, a much less manual way that doesn't need for a new script, since it uses an existing script:
get/install ofn-export-layers
File>Open the first JPEG
File>Open as layers more Jpegs. You can select several/all jpegs in one call (actual number limited by available RAM mostly). Once this is done you have many Jpegs stacked in the same image
File>Export all layers, making sure the name pattern you use ends in .png (the doc that comes with the script explains how that works).
I am trying to understand if it's possible to change the model output format to .csv instead of the default .mat file when simulating a model using dymosim.exe.
I can do this in dymola itself by using the function "convertMATtoCSV" in the base Data files library. Something like below,
DataFiles.convertMATtoCSV("output.mat", {"t"}, "output.csv");
Is there a way to do this conversion using dymosim.exe?
Kindly advise.
Thanks.
Note: cmd "dymosim.exe -h" has some options for .csv but I am not sure how to use this.
No, it is currently not possible to have dymosim.exe generated by Dymola write the result as csv-file. The CSV-options used by dymosim.exe are only for running multiple simulations.
You can:
Generate a txt result instead, if that is easier to handle for you. (By setting Simulation Setup>Output>Textual data format, this is stored as last element of settings in dsin.txt).
Perform the conversion using dymola\bin\alist.exe
Have the model write a cvs-file as well
Set up to perform this as a post-processing command in Dymola 2017 FD01.
I got TFRecode file from magenta but it's difficult(and not precise description for me) to get midi file...
whoever solve this issue, share plz.
Known descrioption from Magenta groups(https://groups.google.com/a/tensorflow.org/forum/#!topic/magenta-discuss/)
The output format for the script is not a MIDI file. It is a TFRecord file containing NoteSequence protobufs with equivalent (but more readable and easily modifiable) representations of the input MIDIs.
You should be able to use sequence_proto_to_pretty_midi and then save the PrettyMIDI object as a midi file:
https://github.com/tensorflow/magenta/blob/master/magenta/lib/midi_io.py#L164
As an exercise, you might try to use the functions in note_sequence_io.py and midi_io.py to convert this file back to MIDIs.
If i achieve it I will share it for you also!
thx
We've recently added a model that you can train to generate new sequences. Have a look at https://github.com/tensorflow/magenta/blob/master/magenta/models/basic_rnn/README.md.
Thanks!
I have a model of a heating process on Ansys Multiphysics, V11.
After running the simulation, I have a script to plot a temperature profile:
!---------------- POST PROCESSING -----------------------
/post1 ! tdatabase postprocessor
!---define profile temperature
path,s_temp1,2,,100 ! define a path
ppath,1,,dop/2,0,0 ! create a path point
ppath,2,,dop/2,1.5,0 ! create a path point
PDEF,surf_t1,TEMP, ,noav ! print a path
plpath,surf_t1 ! plot a path
What I now need, is to save the resulting path in a text file. I have already looked online for a solution, and found the following code to do it, which I appended after the lines above:
/OUTPUT,filename,extension
PRPATH,surf_t1
/OUTPUT
Ansys generates the file filename.extension but it is empty. I tried to place the OUTPUT command in a few locations in the script, but without any success.
I suspect I need to define something else, but I have no idea where to look, as Ansys documentation online is terribly chaotic, and all internet pages I've opened before writing this question are not better.
A final note: Ansys V11 is an old version of the software, but I don't want to upgrade it and fit the old model to the new software.
For the output of the simulation (which includes all calculation steps, and sub-steps description and node-by-node results) the output must be declared in the beginning of the code, and not in the postprocessing phase.
Declaring
/OUTPUT,filename,extension
in the preamble of the main script makes such that the output is stored in the right location, with the desired extension. At the end of the scripts, you must then declare
/OUTPUT
to reset the output file location for ANSYS.
The output to the PATH call made in the postprocessing script is however not printed in the file.
It is convenient to use
*CFOPEN,file,ext
*VWRITE,Vector(1,1).Vector(1,2)
(2F12.6)
*CFCLOSE
where Vector(1,1) is a two column array created by *DIM, and stores your data to output to file
As this is a special command, run it from file i.e. macro_output.mac