In Spyder IDE, I can't able to get the help option when I press Ctrl+I . It shows 'No Documentation Available'. I have even checked the preferences option but still not working.How to rectify this ?
I had the same issue on my Spyder 4.1.5. It's solved by downloading and installing Kite. Make sure the Spyder Kite plugin configuration is in line with this guide: https://help.kite.com/article/90-using-the-spyder-plugin
Related
I am completely new to coding. However, when i try to run some code as shown, this problem shows up. I tried reinstalling but it doesn't work.
(Spyder maintainer here) Sorry for the inconvenience. This is an error in Anaconda, which we already reported to them but it hasn't been fixed yet.
If you only need to use create Python programs, please consider to download and install our Windows installer, which you can find here and doesn't have this problem.
I've been trying to use the packages pandas, numpy, matplotlib, seaborn in my "Visual Studio Code", but the program keeps showing me the following message:
"import pandas could not be resolved from source Pylance(reportMissingModuleSource)"
Previously to Visual Studio Code I installed "Anaconda" to use Jupyter, and now it says that i have the existing packages (pandas, numpy...) but keeps appearing this message that doesn't allow me to use pandas in my Visual Studio.
Anyone could help me to solve this issue?
I tried installing again all the packages to check if they didn't exist but apparently are installed all of them but in another route. I can't find how is the way to put them so the Visual Studio Code recognizes them and I can use them.
I also received similar an error on my IDE VSCode and currently using mac m1 .First we need to make sure that the python3 interpreter version from terminal version is the same with our python version selection in VSCode.
open terminal.
type 'python3'
then you will see your python version.(my python3 version is 3.9.12)
python3 version
open your IDE VSCode
open any/current folder that related to python project on IDE VSCode
Check your python version at the bottom right on IDE VSCode (in my case the python version is 3.10.64)
change or switch VSCode python version from 3.10.64 to 3.9.12 (same with your python version on your pc)
done
I also had this problem and it was because of version mismatches.
I had installed Python AND Anaconda. If anyone else has done this and gets this error, you need to uninstall both. Then install Anaconda only; Python (the compatible version) is installed as part of that process.
See https://docs.anaconda.com/anaconda/install/windows/
Also, you can click on the interpreter version at the bottom left corner of the screen (Vs.code 2022) it should show a dropdown menu with a list of the available and selected python interpreter. Click on add interpreter path and paste the path to the python interpreter with all the required modules installed and click enter. This should resolve the problem.
I re-entered the path to Python interpreter and warning disappeared. Hope that helps you.
Another way I solved this issue having followed every other installation process to the letter was deactivating Pylance. Works a (py)charm now.
I encountered this problem in VSCode under remote to WSL2 of Windows 10. The Python version is correct as interpreter (3.9.13) and the terminal in VSCode is also under the same envs (ie. VSCode ran "conda activate xx" and (xx) is shown in prompt)
Originally, I tried to install the pandas by the following command.
sudo apt-get install python3-pandas
Pandas was installed successfully as stated in the terminal but the problem is still there.
When I try to install pandas by the following command, the problem solved.
pip install pandas
I just seen that Fleet, the new JetBrains code editor is available on JetBrains Toolbox. But in mine, I am not able to see it. I tried to search for update, maybe I'll see it in the list but nothing happens.
So I want to know if someone is able to see in JetBrains Toolbox or already install it. If so, please help me to install also. I am using Ubuntu 18.04 LTS.
It's not available yet. You can subscribe to be notified when the open preview is available.
JetBrains Fleet is now in EAP (Early Access Preview). You can install it through JetBrains Toolbox.
https://www.jetbrains.com/fleet/
https://www.jetbrains.com/toolbox-app/
Mine is Anaconda 5.3.0
When I run .py in PyCharm 2018.2.4, why it shows that:
ImportError:
DLL load failed: The specified module could not be found.
ImportError:
Importing the multiarray numpy extension module failed. Most
likely you are trying to import a failed build of numpy.
If you're working with a numpy git repo, try `git clean -xdf` (removes all
files not under version control). Otherwise reinstall numpy.
Original error was: DLL load failed: The specified module could not be found.
It seems that PyCharm 2018.2.4 cannot import numpy??
Does anyone see this problem too? How to fix it? Thank you very much.
You can set the Python interpreter path on PyCharm to the Anaconda one (something like ~/anaconda3/bin/python).
Todo do so, open the Settings dialog >> Project: [ProjName] in the left panel >> Project Interpreter. Now you can add to the list paths to local Python interpreters, or virtual environments in the project folder or in a folder specified in the WORKON_HOME.
More instructions here and here.
I believe I have useful information if not the solution.
I too received the error using python to import numpy from the windows command prompt. Then I realized I could succeed if I used the Anaconda prompt. Curious about the difference, I exited python and examined the PATH environment variable. As I had hoped, it contained Anaconda references that did not exist in the Windows PATH. At the command prompt I typed: path > p.txt and hit enter to create a file since the string was so long. When I opened the file in notepad I copied the Anaconda references to the clipboard (C:\Users\laptop\Anaconda3;C:\Users\laptop\Anaconda3\Library\mingw-w64\bin;C:\Users\laptop\Anaconda3\Library\usr\bin;C:\Users\laptop\Anaconda3\Library\bin;C:\Users\laptop\Anaconda3\Scripts;C:\Users\laptop\Anaconda3\bin;) then used the Advanced Settings under the System Control Panel to Edit the Environment Variable and paste it on the beginning of PATH. The problem seems to have gone away, both in the Windows shell and in Pycharm.
First, try to delete .git file from project folder and re-enable vcs. Then uninstall numpy by:
pip3 uninstall numpy
After that, go to pycharm and open File > settings > Project Intepreter get the python location url ex: usr/bin/python3. Copy that path and open terminal and type:
usr/bin/python3 install numpy. Wait for pycharm indexing and try to run project again
I don't think it's an issue with PyCharm.
I got Anaconda 5.3 today and use PyCharm Pro 2018.2.4. Unfortunately, I got the same error as you do. However, if you go to powershell (if you are on Windows like me), type in python and import numpy you still got the same error.
Not sure why yet but uninstall & reinstall didn't help (and tbh I don't get why this might help in any sense though).
So my current solution is:
Roll back to Anaconda 5.2 with Python 3.6 and everything gets back to working.
I have the same thing, pychrm 2018.2 & Anaconda3 (64-bit) 5.3 on win10
I think the issue is about Anaconda, I have uninstalled the Anaconda 5.3 and installed Anaconda 5.2, then everything is ok
I get all set tools of selenium, such as wxPython, python, also set the 'Path', but when I try to open ride.py to launch selenium, I find this .py started with Pycharm, then only thing I see is the IDE. Do I need to uninstall Pycharm to resolve the problem?
Version -- Pycharm4.5.3, python2.7
I guess you are double clicking the file which opens it in IDE? If yes the open a terminal and use python ride.py to run it