I usually use venv in my projects. Created by:
python -m venv venv
Most of my projects include numpy, so naturally I install that via pip too.
If I start VS code now, it analyses everything, its interpreter is the venv, and intellisense works fine.
Intellisense working normally
Now, if reboot my machine, or just re open the project at a later time, this is what I get for intellisense:
Intellisense not working properly
Can someone help me solve this? Thanks
Related
I have been working on a project in Visual Studio Code with Python 3.8.5, and I have a windows 64 bit operating system. I decided to upgrade to Python 3.11.1, and downloaded the official 64 bit installer and followed the instructions. All the packages I import at the beginning of my project that were previously working now give this error "[WinError 193] %1 is not a valid Win32 application" when I run the import statements for them.
For some of the packages (pandas, numpy, matploblib) this was solved by using an approach I saw on a few similar questions to this, by opening the command prompt and typing "pip uninstall pandas" etc and then doing "pip install pandas".
However, for the other packages (sklearn, umap, nltk), this isn't working even after trying that process a few times. I've also tried updating pip. Does anybody have any ideas on what could be causing this to work for some packages but not for others? It allows me to install all of the packages via the command prompt, the issue only arises when I actually try and import them via VSCode, and it's the same error for every package. I've seen some suggestions saying to ensure the environment path is clean, but I'm still quite a beginner so I'm a bit unsure as to what that means.
Any help would be really appreciated.
I've been trying to use the packages pandas, numpy, matplotlib, seaborn in my "Visual Studio Code", but the program keeps showing me the following message:
"import pandas could not be resolved from source Pylance(reportMissingModuleSource)"
Previously to Visual Studio Code I installed "Anaconda" to use Jupyter, and now it says that i have the existing packages (pandas, numpy...) but keeps appearing this message that doesn't allow me to use pandas in my Visual Studio.
Anyone could help me to solve this issue?
I tried installing again all the packages to check if they didn't exist but apparently are installed all of them but in another route. I can't find how is the way to put them so the Visual Studio Code recognizes them and I can use them.
I also received similar an error on my IDE VSCode and currently using mac m1 .First we need to make sure that the python3 interpreter version from terminal version is the same with our python version selection in VSCode.
open terminal.
type 'python3'
then you will see your python version.(my python3 version is 3.9.12)
python3 version
open your IDE VSCode
open any/current folder that related to python project on IDE VSCode
Check your python version at the bottom right on IDE VSCode (in my case the python version is 3.10.64)
change or switch VSCode python version from 3.10.64 to 3.9.12 (same with your python version on your pc)
done
I also had this problem and it was because of version mismatches.
I had installed Python AND Anaconda. If anyone else has done this and gets this error, you need to uninstall both. Then install Anaconda only; Python (the compatible version) is installed as part of that process.
See https://docs.anaconda.com/anaconda/install/windows/
Also, you can click on the interpreter version at the bottom left corner of the screen (Vs.code 2022) it should show a dropdown menu with a list of the available and selected python interpreter. Click on add interpreter path and paste the path to the python interpreter with all the required modules installed and click enter. This should resolve the problem.
I re-entered the path to Python interpreter and warning disappeared. Hope that helps you.
Another way I solved this issue having followed every other installation process to the letter was deactivating Pylance. Works a (py)charm now.
I encountered this problem in VSCode under remote to WSL2 of Windows 10. The Python version is correct as interpreter (3.9.13) and the terminal in VSCode is also under the same envs (ie. VSCode ran "conda activate xx" and (xx) is shown in prompt)
Originally, I tried to install the pandas by the following command.
sudo apt-get install python3-pandas
Pandas was installed successfully as stated in the terminal but the problem is still there.
When I try to install pandas by the following command, the problem solved.
pip install pandas
I think this question has been asked before on the internet, but the proposed solutions have so far not worked.
I am trying to run a script that imports numpy and pandas. When I run using the Python Console in my IDE (PyCharm), everything works fine. However, when I run the script from the command line, the following error is displayed:
DLL load failed: The specified module could not be found.
and
Unable to import required dependencies
I am using Anaconda Navigator. There my Pandas and Numpy are listed. I tried to uninstall them via the conda shell (conda uninstall numpy, conda uninstall pandas) and then install them again, but without result.
Hope anyone can help.
If you haven't already call this (no quotes)
conda activate "name of environment that has your modules installed"
After trial and error, I de-installed Anaconda and installed pip instead. Then I installed the modules using pip, and it worked like a charm.
(Not the most elegant answer since it does not explain why things went wrong in the first place, but it offered a workable solution at least.)
Mine is Anaconda 5.3.0
When I run .py in PyCharm 2018.2.4, why it shows that:
ImportError:
DLL load failed: The specified module could not be found.
ImportError:
Importing the multiarray numpy extension module failed. Most
likely you are trying to import a failed build of numpy.
If you're working with a numpy git repo, try `git clean -xdf` (removes all
files not under version control). Otherwise reinstall numpy.
Original error was: DLL load failed: The specified module could not be found.
It seems that PyCharm 2018.2.4 cannot import numpy??
Does anyone see this problem too? How to fix it? Thank you very much.
You can set the Python interpreter path on PyCharm to the Anaconda one (something like ~/anaconda3/bin/python).
Todo do so, open the Settings dialog >> Project: [ProjName] in the left panel >> Project Interpreter. Now you can add to the list paths to local Python interpreters, or virtual environments in the project folder or in a folder specified in the WORKON_HOME.
More instructions here and here.
I believe I have useful information if not the solution.
I too received the error using python to import numpy from the windows command prompt. Then I realized I could succeed if I used the Anaconda prompt. Curious about the difference, I exited python and examined the PATH environment variable. As I had hoped, it contained Anaconda references that did not exist in the Windows PATH. At the command prompt I typed: path > p.txt and hit enter to create a file since the string was so long. When I opened the file in notepad I copied the Anaconda references to the clipboard (C:\Users\laptop\Anaconda3;C:\Users\laptop\Anaconda3\Library\mingw-w64\bin;C:\Users\laptop\Anaconda3\Library\usr\bin;C:\Users\laptop\Anaconda3\Library\bin;C:\Users\laptop\Anaconda3\Scripts;C:\Users\laptop\Anaconda3\bin;) then used the Advanced Settings under the System Control Panel to Edit the Environment Variable and paste it on the beginning of PATH. The problem seems to have gone away, both in the Windows shell and in Pycharm.
First, try to delete .git file from project folder and re-enable vcs. Then uninstall numpy by:
pip3 uninstall numpy
After that, go to pycharm and open File > settings > Project Intepreter get the python location url ex: usr/bin/python3. Copy that path and open terminal and type:
usr/bin/python3 install numpy. Wait for pycharm indexing and try to run project again
I don't think it's an issue with PyCharm.
I got Anaconda 5.3 today and use PyCharm Pro 2018.2.4. Unfortunately, I got the same error as you do. However, if you go to powershell (if you are on Windows like me), type in python and import numpy you still got the same error.
Not sure why yet but uninstall & reinstall didn't help (and tbh I don't get why this might help in any sense though).
So my current solution is:
Roll back to Anaconda 5.2 with Python 3.6 and everything gets back to working.
I have the same thing, pychrm 2018.2 & Anaconda3 (64-bit) 5.3 on win10
I think the issue is about Anaconda, I have uninstalled the Anaconda 5.3 and installed Anaconda 5.2, then everything is ok
I do not have internet access on my linux computer therefore I installed TF from source by following TensorFlow Get Started.
I ran into a few trouble to build trainer_example due to the lack of internet connection hopefully someone from tensorflow helped me through it by creating local repositories for re2, gemmlowp, jpegsrc v9a, libpng and six and modifying WORKSPACE accordingly.
When I try to bazel build pip_package to create the wheel then I think I run into the same problem but :
-the list of repositories is insanely long (to manually install each of them) even if they seem to be mostly part of PolymerElements
Is there an easy workaround ?
If you are happy to create a PIP package without TensorBoard, you should be able to avoid rewriting the Polymer dependencies by removing this line ("//tensorflow/tensorbaord" in the build_pip_package dependencies) from tensorflow/tools/pip_package/BUILD.