I installed tf_trt_models on Jetson-nano following the instructions here. I am getting the following error
Installed /home/tarik-dev/.local/lib/python3.6/site-packages/slim-0.1-py3.6.egg
Processing dependencies for slim==0.1
Finished processing dependencies for slim==0.1
~/tf_trt_models
Installing tf_trt_models
/home/tarik-dev/tf_trt_models
running install
Checking .pth file support in /home/tarik-dev/.local/lib/python3.6/site-packages/
/home/tarik-dev/.virtualenvs/nanocv/bin/python -E -c pass
TEST FAILED: /home/tarik-dev/.local/lib/python3.6/site-packages/ does NOT support .pth files
bad install directory or PYTHONPATH
Found the solution. In the install script, because I am in virtualenv, I will need to remove --user
Here is the install.sh script
#!/bin/bash
INSTALL_PROTOC=$PWD/scripts/install_protoc.sh
MODELS_DIR=$PWD/third_party/models
PYTHON=python
if [ $# -eq 1 ]; then
PYTHON=$1
fi
echo $PYTHON
# install protoc
echo "Downloading protoc"
source $INSTALL_PROTOC
PROTOC=$PWD/data/protoc/bin/protoc
# install tensorflow models
git submodule update --init
pushd $MODELS_DIR/research
echo $PWD
echo "Installing object detection library"
echo $PROTOC
$PROTOC object_detection/protos/*.proto --python_out=.
$PYTHON setup.py install --user
popd
pushd $MODELS_DIR/research/slim
echo $PWD
echo "Installing slim library"
$PYTHON setup.py install --user
popd
echo "Installing tf_trt_models"
echo $PWD
$PYTHON setup.py install --user
Related
Hi I install odoo 12 in cloud-server in Ubuntu 18.04.3 (LTS) x64 using below script command
Download my installation script from Github and copy it locally:
sudo wget https://raw.githubusercontent.com/Yenthe666/InstallScript/12.0/odoo_install.sh
Edit the file and modify the parameters that you'd like to change:
sudo nano odoo_install.sh
Tip: If you'd like the enterprise version you should set IS_ENTERPRISE to True instead of false.
3. Make the file executable:
sudo chmod +x odoo_install.sh
Execute the script and wait a few minutes for Odoo to install:
./odoo_install.sh
After installation i run command sudo service odoo-server start.
I check the status server is running and active.
But when i try to access in browser 0.0.0.0:8069
Unable to connect
Firefox can’t establish a connection to the server at 206.189.197.248:8069.
the standard binding of odoo is:
bind = '127.0.0.1:8069'
you might change this to 0.0.0.0:8069, but i do not recommend such alike.
You will want to have e.g. nginx to upstream 127.0.0.1:8069
to a real webserver e.g. nginx:
upstream odoo {
socket
server 127.0.0.1:8069; # for a web port socket (we'll use this first)
}
upstream odoo-chat {
server 127.0.0.1:8072;
}
I have a better solution that can be helpful to others.
I have just modified the existing script and it works like a charm.
I modified Yenthe Van Ginneken script
Change requirements libraries installation process.
Add new python libraries and modified specific versions of python libraries.
Change the npm install process.
#!/bin/bash
################################################################################
# Script for installing Odoo on Ubuntu 14.04, 15.04, 16.04 and 18.04 (could be used for other version too)
# Author: Yenthe Van Ginneken
# Modified by: Shahid Raza
#-------------------------------------------------------------------------------
# This script will install Odoo on your Ubuntu 16.04 server. It can install multiple Odoo instances
# in one Ubuntu because of the different xmlrpc_ports
#-------------------------------------------------------------------------------
# Make a new file:
# sudo nano odoo-install.sh
# Place this content in it and then make the file executable:
# sudo chmod +x odoo-install.sh
# Execute the script to install Odoo:
# ./odoo-install
################################################################################
#OE_USER is your system user change name according your system
OE_USER="odoo"
OE_HOME="/$OE_USER"
OE_HOME_EXT="/$OE_USER/${OE_USER}-server"
# The default port where this Odoo instance will run under (provided you use the command -c in the terminal)
# Set to true if you want to install it, false if you don't need it or have it already installed.
INSTALL_WKHTMLTOPDF="True"
# Set the default Odoo port (you still have to use -c /etc/odoo-server.conf for example to use this.)
OE_PORT="8069"
# Choose the Odoo version which you want to install. For example: 12.0, 11.0, 10.0 or saas-18. When using 'master' the master version will be installed.
# IMPORTANT! This script contains extra libraries that are specifically needed for Odoo 12.0
OE_VERSION="12.0"
# Set this to True if you want to install the Odoo enterprise version!
IS_ENTERPRISE="False"
# set the superadmin password
OE_SUPERADMIN="admin"
OE_CONFIG="${OE_USER}-server"
##
### WKHTMLTOPDF download links
## === Ubuntu Trusty x64 & x32 === (for other distributions please replace these two links,
## in order to have correct version of wkhtmltopdf installed, for a danger note refer to
## https://github.com/odoo/odoo/wiki/Wkhtmltopdf ):
WKHTMLTOX_X64=https://github.com/wkhtmltopdf/wkhtmltopdf/releases/download/0.12.5/wkhtmltox_0.12.5-1.trusty_amd64.deb
WKHTMLTOX_X32=https://github.com/wkhtmltopdf/wkhtmltopdf/releases/download/0.12.5/wkhtmltox_0.12.5-1.trusty_i386.deb
#--------------------------------------------------
# Update Server
#--------------------------------------------------
echo -e "\n---- Update Server ----"
# add-apt-repository can install add-apt-repository Ubuntu 18.x
sudo apt-get install software-properties-common
# universe package is for Ubuntu 18.x
sudo add-apt-repository universe
# libpng12-0 dependency for wkhtmltopdf
sudo add-apt-repository "deb http://mirrors.kernel.org/ubuntu/ xenial main"
sudo apt-get update
sudo apt-get upgrade -y
#--------------------------------------------------
# Install PostgreSQL Server
#--------------------------------------------------
echo -e "\n---- Install PostgreSQL Server ----"
sudo apt-get install postgresql -y
echo -e "\n---- Creating the ODOO PostgreSQL User ----"
sudo su - postgres -c "createuser -s $OE_USER" 2> /dev/null || true
#--------------------------------------------------
# Install Dependencies
#--------------------------------------------------
echo -e "\n--- Installing Python 3 + pip3 --"
sudo apt-get install git python3 python3-pip build-essential wget python3-dev python3-venv python3-wheel libxslt-dev libzip-dev libldap2-dev libsasl2-dev python3-setuptools node-less libpng12-0 gdebi -y
echo -e "\n---- Install python packages/requirements ----"
sudo pip3 install Babel
sudo pip3 install chardet
sudo pip3 install decorator
sudo pip3 install docutils
sudo pip3 install ebaysdk
sudo pip3 install feedparser
sudo pip3 install gevent
sudo pip3 install greenlet
sudo pip3 install html2text
sudo pip3 install Jinja2
sudo pip3 install lxml
sudo pip3 install Mako
sudo pip3 install MarkupSafe
sudo pip3 install mock
sudo pip3 install num2words
sudo pip3 install ofxparse
sudo pip3 install passlib
sudo pip3 install Pillow
sudo pip3 install psutil
sudo pip3 install psycopg2-binary
sudo pip3 install pydot
sudo pip3 install pyldap
sudo pip3 install pyparsing
sudo pip3 install PyPDF2
sudo pip3 install pyserial
sudo pip3 install python-dateutil
sudo pip3 install pytz
sudo pip3 install pyusb
sudo pip3 install qrcode
sudo pip3 install reportlab
sudo pip3 install requests
sudo pip3 install suds-jurko
sudo pip3 install vatnumber
sudo pip3 install vobject
sudo pip3 install Werkzeug==0.11.15
sudo pip3 install XlsxWriter
sudo pip3 install xlwt
sudo pip3 install xlrd
sudo pip3 install pypiwin32
sudo pip3 install libsass==0.12.3
echo -e "\n---- Installing nodeJS NPM and rtlcss for LTR support ----"
sudo apt-get install -y npm
sudo ln -s /usr/bin/nodejs /usr/bin/node
sudo npm install -g less less-plugin-clean-css
sudo apt-get install -y node-less
#--------------------------------------------------
# Install Wkhtmltopdf if needed
#--------------------------------------------------
if [ $INSTALL_WKHTMLTOPDF = "True" ]; then
echo -e "\n---- Install wkhtml and place shortcuts on correct place for ODOO 12 ----"
#pick up correct one from x64 & x32 versions:
if [ "`getconf LONG_BIT`" == "64" ];then
_url=$WKHTMLTOX_X64
else
_url=$WKHTMLTOX_X32
fi
sudo wget $_url
sudo gdebi --n `basename $_url`
sudo ln -s /usr/local/bin/wkhtmltopdf /usr/bin
sudo ln -s /usr/local/bin/wkhtmltoimage /usr/bin
else
echo "Wkhtmltopdf isn't installed due to the choice of the user!"
fi
echo -e "\n---- Create ODOO system user ----"
sudo adduser --system --quiet --shell=/bin/bash --home=$OE_HOME --gecos 'ODOO' --group $OE_USER
#The user should also be added to the sudo'ers group.
sudo adduser $OE_USER sudo
echo -e "\n---- Create Log directory ----"
sudo mkdir /var/log/$OE_USER
sudo chown $OE_USER:$OE_USER /var/log/$OE_USER
#--------------------------------------------------
# Install ODOO
#--------------------------------------------------
echo -e "\n==== Installing ODOO Server ===="
sudo git clone --depth 1 --branch $OE_VERSION https://www.github.com/odoo/odoo $OE_HOME_EXT/
if [ $IS_ENTERPRISE = "True" ]; then
# Odoo Enterprise install!
echo -e "\n--- Create symlink for node"
sudo ln -s /usr/bin/nodejs /usr/bin/node
sudo su $OE_USER -c "mkdir $OE_HOME/enterprise"
sudo su $OE_USER -c "mkdir $OE_HOME/enterprise/addons"
GITHUB_RESPONSE=$(sudo git clone --depth 1 --branch $OE_VERSION https://www.github.com/odoo/enterprise "$OE_HOME/enterprise/addons" 2>&1)
while [[ $GITHUB_RESPONSE == *"Authentication"* ]]; do
echo "------------------------WARNING------------------------------"
echo "Your authentication with Github has failed! Please try again."
printf "In order to clone and install the Odoo enterprise version you \nneed to be an offical Odoo partner and you need access to\nhttp://github.com/odoo/enterprise.\n"
echo "TIP: Press ctrl+c to stop this script."
echo "-------------------------------------------------------------"
echo " "
GITHUB_RESPONSE=$(sudo git clone --depth 1 --branch $OE_VERSION https://www.github.com/odoo/enterprise "$OE_HOME/enterprise/addons" 2>&1)
done
echo -e "\n---- Added Enterprise code under $OE_HOME/enterprise/addons ----"
echo -e "\n---- Installing Enterprise specific libraries ----"
sudo pip3 install num2words ofxparse
sudo npm install -g less
sudo npm install -g less-plugin-clean-css
fi
echo -e "\n---- Create custom module directory ----"
sudo su $OE_USER -c "mkdir $OE_HOME/custom"
sudo su $OE_USER -c "mkdir $OE_HOME/custom/addons"
echo -e "\n---- Setting permissions on home folder ----"
sudo chown -R $OE_USER:$OE_USER $OE_HOME/*
echo -e "* Create server config file"
sudo touch /etc/${OE_CONFIG}.conf
echo -e "* Creating server config file"
sudo su root -c "printf '[options] \n; This is the password that allows database operations:\n' >> /etc/${OE_CONFIG}.conf"
sudo su root -c "printf 'admin_passwd = ${OE_SUPERADMIN}\n' >> /etc/${OE_CONFIG}.conf"
sudo su root -c "printf 'xmlrpc_port = ${OE_PORT}\n' >> /etc/${OE_CONFIG}.conf"
sudo su root -c "printf 'logfile = /var/log/${OE_USER}/${OE_CONFIG}.log\n' >> /etc/${OE_CONFIG}.conf"
if [ $IS_ENTERPRISE = "True" ]; then
sudo su root -c "printf 'addons_path=${OE_HOME}/enterprise/addons,${OE_HOME_EXT}/addons\n' >> /etc/${OE_CONFIG}.conf"
else
sudo su root -c "printf 'addons_path=${OE_HOME_EXT}/addons,${OE_HOME}/custom/addons\n' >> /etc/${OE_CONFIG}.conf"
fi
sudo chown $OE_USER:$OE_USER /etc/${OE_CONFIG}.conf
sudo chmod 640 /etc/${OE_CONFIG}.conf
echo -e "* Create startup file"
sudo su root -c "echo '#!/bin/sh' >> $OE_HOME_EXT/start.sh"
sudo su root -c "echo 'sudo -u $OE_USER $OE_HOME_EXT/openerp-server --config=/etc/${OE_CONFIG}.conf' >> $OE_HOME_EXT/start.sh"
sudo chmod 755 $OE_HOME_EXT/start.sh
#--------------------------------------------------
# Adding ODOO as a deamon (initscript)
#--------------------------------------------------
echo -e "* Create init file"
cat <<EOF > ~/$OE_CONFIG
#!/bin/sh
### BEGIN INIT INFO
# Provides: $OE_CONFIG
# Required-Start: \$remote_fs \$syslog
# Required-Stop: \$remote_fs \$syslog
# Should-Start: \$network
# Should-Stop: \$network
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Enterprise Business Applications
# Description: ODOO Business Applications
### END INIT INFO
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
DAEMON=$OE_HOME_EXT/odoo-bin
NAME=$OE_CONFIG
DESC=$OE_CONFIG
# Specify the user name (Default: odoo).
USER=$OE_USER
# Specify an alternate config file (Default: /etc/openerp-server.conf).
CONFIGFILE="/etc/${OE_CONFIG}.conf"
# pidfile
PIDFILE=/var/run/\${NAME}.pid
# Additional options that are passed to the Daemon.
DAEMON_OPTS="-c \$CONFIGFILE"
[ -x \$DAEMON ] || exit 0
[ -f \$CONFIGFILE ] || exit 0
checkpid() {
[ -f \$PIDFILE ] || return 1
pid=\`cat \$PIDFILE\`
[ -d /proc/\$pid ] && return 0
return 1
}
case "\${1}" in
start)
echo -n "Starting \${DESC}: "
start-stop-daemon --start --quiet --pidfile \$PIDFILE \
--chuid \$USER --background --make-pidfile \
--exec \$DAEMON -- \$DAEMON_OPTS
echo "\${NAME}."
;;
stop)
echo -n "Stopping \${DESC}: "
start-stop-daemon --stop --quiet --pidfile \$PIDFILE \
--oknodo
echo "\${NAME}."
;;
restart|force-reload)
echo -n "Restarting \${DESC}: "
start-stop-daemon --stop --quiet --pidfile \$PIDFILE \
--oknodo
sleep 1
start-stop-daemon --start --quiet --pidfile \$PIDFILE \
--chuid \$USER --background --make-pidfile \
--exec \$DAEMON -- \$DAEMON_OPTS
echo "\${NAME}."
;;
*)
N=/etc/init.d/\$NAME
echo "Usage: \$NAME {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0
EOF
echo -e "* Security Init File"
sudo mv ~/$OE_CONFIG /etc/init.d/$OE_CONFIG
sudo chmod 755 /etc/init.d/$OE_CONFIG
sudo chown root: /etc/init.d/$OE_CONFIG
echo -e "* Start ODOO on Startup"
sudo update-rc.d $OE_CONFIG defaults
echo -e "* Starting Odoo Service"
sudo su root -c "/etc/init.d/$OE_CONFIG start"
echo "-----------------------------------------------------------"
echo "Done! The Odoo server is up and running. Specifications:"
echo "Port: $OE_PORT"
echo "User service: $OE_USER"
echo "User PostgreSQL: $OE_USER"
echo "Code location: $OE_USER"
echo "Addons folder: $OE_USER/$OE_CONFIG/addons/"
echo "Start Odoo service: sudo service $OE_CONFIG start"
echo "Stop Odoo service: sudo service $OE_CONFIG stop"
echo "Restart Odoo service: sudo service $OE_CONFIG restart"
echo "-----------------------------------------------------------"
Linux: Ubuntu 16.04
VMware 15
I'm currently learning how to use pwndbg. When I try to display the chunk details using the command heap. It shows one allocated chunk that only displays the addr and size this is what shows up when I do heap inspection rather than displaying prev_size, size, fd, bk, fd_nextsize, bk_nextsize This is what I want it to show
This is the script I used to install pwndbg and its dependencies
#!/bin/sh
# Date: 2020-01-01
# Author: chandler
# Description: pwn environment install script for ubuntu
# Fiel: pwn_env_install.sh
# update source list
## backup the sources.list
echo "updating apt source"
sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak
sudo chmod 666 /etc/apt/sources.list
## update
echo deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ xenial main restricted universe multiverse > /etc/apt/sources.list
echo deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ xenial-updates main restricted universe multiverse >> /etc/apt/sources.list
echo deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ xenial-backports main restricted universe multiverse >> /etc/apt/sources.list
echo deb https://mirrors.tuna.tsinghua.edu.cn/ubuntu/ xenial-security main restricted universe multiverse >> /etc/apt/sources.list
## restore
sudo chmod 660 /etc/apt/sources.list
## update
sudo apt-get update -y
# install curl
echo "install curl"
#sudo apt-get install libcurl3-gnutls=7.47.0-1ubuntu2 -y
sudo apt install curl -y
# install ruby
echo "install ruby"
sudo apt-get install ruby -y
echo "install gem"
sudo apt-get install gem -y
# install pip
echo "install python-pip"
sudo apt install python-pip -y
#install vim
echo "install vim"
#sudo apt-get install vim-common=2:7.4.1689-3ubuntu1 -y
sudo apt-get install vim -y
echo "custom configure vim"
cp vimrc ~/.vimrc
#install tmux
echo "install tmux"
sudo apt-get install tmux -y
echo "custom configure tmux"
cp tmux.conf ~/.tmux.conf
# install git
echo "install git"
sudo apt-get install git -y
# install ssh
echo "install ssh server"
sudo apt-get install openssh-server -y
# some lib
echo "install lib:"
echo "\tbiscon"
sudo apt-get install bison -y
echo "\tgawk"
sudo apt-get install gawk -y
echo "\tgcc-multilib"
sudo apt-get install gcc-multilib -y
echo "\tg++-multilib"
sudo apt-get install g++-multilib -y
# install one_gadget
echo "install one_gadget"
sudo gem install one_gadget
# install patchelf
echo "install patchelf"
sudo apt-get install patchelf -y
# install pwntools
echo "install pwntools"
pip install pwntools
# make dir ~/work/soft to install soft
mkdir -p ~/work/soft
# install pwndbg
echo "install pwndbg"
if [ ! -d "$HOME/work/soft/pwndbg" ]; then
git clone https://github.com/pwndbg/pwndbg.git ~/work/soft/pwndbg
(cd ~/work/soft/pwndbg && ./setup.sh)
else
echo "[*] ~/work/soft/pwndbg exists..."
fi
# install peda
echo "install peda"
if [ ! -d "$HOME/work/soft/peda" ]; then
git clone https://github.com/longld/peda.git ~/work/soft/peda
echo "#source ~/work/soft/peda/peda.py" >> ~/.gdbinit
else
echo "[*] ~/work/soft/peda exists..."
fi
# install pwn_debug
echo "install pwn_debug"
if [ ! -d "$HOME/work/soft/pwn_debug" ]; then
git clone https://github.com/ray-cp/pwn_debug.git ~/work/soft/pwn_debug
(cd ~/work/soft/pwn_debug && sudo python setup.py install)
else
echo "[*] ~/work/soft/pwn_debug exists..."
fi
# install zsh
echo "install zsh"
sudo apt-get install zsh -y
## need to exit manually
echo "[!] ENTER exit manually!"
#sh -c "$(curl -fsSL https://github.com/robbyrussell/oh-my-zsh/raw/master/tools/install.sh)"
git clone git://github.com/robbyrussell/oh-my-zsh.git ~/.oh-my-zsh
cp ~/.oh-my-zsh/templates/zshrc.zsh-template ~/.zshrc
bash_aliases=$(cat ~/.zshrc | grep "~/.bash_aliases")
if [ -z "$bash_aliases" ];then
echo "[*] add ~/.bash_aliases in ~/.zshrc"
cat <<EOF >>~/.zshrc
## add ~/.bash_aliases
if [ -f ~/.bash_aliases ]; then
. ~/.bash_aliases
fi
EOF
else
echo "[*] ~/.bash_aliases exists in ~/.zshrc"
fi
## use dircolors
echo "[*] add ~/.dircolors in ~/.zshrc"
dircolors -p > ~/.dircolors
cat <<EOF >>~/.zshrc
## enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
alias ls='ls --color=auto'
#alias dir='dir --color=auto'
#alias vdir='vdir --color=auto'
alias grep='grep --color=auto'
alias fgrep='fgrep --color=auto'
alias egrep='egrep --color=auto'
fi
EOF
## install zsh-autosuggestions
if [ ! -d "$HOME/.zsh/zsh-autosuggestions" ]; then
git clone git://github.com/zsh-users/zsh-autosuggestions ~/.zsh/zsh-autosuggestions
echo "source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh" >> ~/.zshrc
else
echo "[*] ~/.zsh/zsh-autosuggestions exists..."
fi
## install zsh-syntax-highlighting
if [ ! -d "$HOME/.zsh/zsh-syntax-highlighting" ]; then
git clone https://github.com/zsh-users/zsh-syntax-highlighting.git ~/.zsh/zsh-syntax-highlighting
echo "source ~/.zsh/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh" >> ~/.zshrc
else
echo "[*] ~/.zsh/zsh-syntax-highlighting exists...."
fi
sudo apt-get install autojump -y
if [ `grep -c ". /usr/share/autojump/autojump.sh" ~/.zshrc` -eq '0' ]; then
echo "autojump has been installed"
else
echo . /usr/share/autojump/autojump.sh >> ~/.zshrc
fi
sed -i "s/ZSH_THEME=\"robbyrussell\"/ZSH_THEME=\"ys\"/g" ~/.zshrc
# change zsh to default shell
sudo chsh -s /bin/zsh
echo "[*] ENJOY!"
echo "if you wanna install glibc with debug symbols go to ~/work/soft/pwn_debug and execute '/build.sh'"
/bin/zsh
and this is the c file I used for learning
#include<stdio.h>
#include<malloc.h>
#include<unistd.h>
#include<string.h>
int main(){
int size = 0x100;
void *p = malloc(size);
void *junk = malloc(size);
void *q = malloc(size);
void *r = malloc(size);
printf("p:0x%x\n",p);
printf("q:0x%x\n",q);
printf("r:0x%x\n",r);
strcpy(p,"aaaaaaaabbbbbbbb");
strcpy(q,"ccccccccdddddddd");
strcpy(r,"eeeeeeeeffffffff");
sleep(0);
free(p);
sleep(0);
free(q);
sleep(0);
q = malloc(0x600);
sleep(0);
return 0;
}
Use:
heap -v
They changed the command a few months ago to show only relevant fields by default (commit: https://github.com/pwndbg/pwndbg/pull/728). If you use the verbose flag you get all fields, even if they aren't in use.
It took me a while to find as well
I want to setup the ct-ng for my gui application and now I want to use wxwidgets.
For setting up the crosstool, I have used:
# Install prerequisites:
apt-get -y install gcc gperf bison flex gawk libtool automake libncurses5-dev texinfo
# Setup toolchain
# instructions from https://github.com/crosstool-ng/crosstool-ng
cd toolchain/crosstool-ng
./bootstrap
./configure --prefix=$HOME/.local
make && make install
echo -ne "\n\nif [ -d \"$HOME/.local/bin\" ]; then\n PATH=\"$HOME/.local/bin:$PATH\"\nfi" >> ~/.profile
source ~/.profile
mkdir ../tc/
cd ../tc/
ct-ng list-samples
ct-ng x86_64-w64-mingw32
ct-ng build # lasts 30 minutes...
##################### WxWidgets ######################
cd ../wxWidgets/
sh autogen.sh
./configure --prefix="$HOME/prefix" --enable-static --disable-shared --build=x86_64-w64-mingw32 --enable-unicode --without-libtiff --without-libjpeg --with-expat=builtin --with-libpng=builtin
make
The only way I have found is to clone wxwidgets from github and compile it as above in the script. Then, I included as path -I
WXWIDGET=../toolchain/wxWidgets/include/
$(CXX) -I$(FLEX) -I$(WXWIDGET) $(WXWIDGETSFLAGS) $(CPPFLAGS) $(header) $(src) $(obj3) -o $(OUTPUT)/$(bin)
Hundreds of errors appearing while compiling:
In file included from ../toolchain/wxWidgets/include/wx/platform.h:485:0,
from ../toolchain/wxWidgets/include/wx/defs.h:20,
from ../toolchain/wxWidgets/include/wx/string.h:24,
from ../toolchain/wxWidgets/include/wx/artprov.h:14,
from parser/include/gui.h:17,
from parser/include/customdialogs.h:17:
../toolchain/wxWidgets/include/wx/chkconf.h:282:9: error: #error "wxUSE_SECRETSTORE must be defined, please read comment near the top of this file."
# error "wxUSE_SECRETSTORE must be defined, please read comment near the top of this file."
What should I do?
You need to try "--host" and "--target" configure options.
Just try "../configure --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32 --disable-shared --enable-unicode".
BTW, "--enable-unicode" should be turned on by default. So you can drop it.
Also, if you software required C++11, you should compile the library as:
CXXFLAGS="-std=c++11" ../configure --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32 --disable-shared --enable-unicode
I'm currently compiling the latest version of Mono from Github on an original version Raspberry Pi, on latest Raspbian.
This is a very time consuming process, which when it's complete I would not like to have to repeat.
Can the compiled Mono installation be packaged into a .deb to, for example, allow me to re-install latest Raspbian, then dpkg -i my-mono-build.deb?
Sure, and it's very easy to do if you choose the proper tool so that you don't need a master on debian packaging. As for me, I chose fpm to do exactly this. (Note: install via gem, not apt-get.)
And here you have an example of a script of how to build a Mono .deb with this, which I copy+paste here for posterity (just in case I delete the github repo by mistake, or github stops being a thing in the future):
#!/bin/bash
set -e
die () {
echo >&2 "$#"
exit 1
}
[ "$#" -eq 1 ] || die "Please specify the version of Mono you want to build as the argument. (Check the versions in the tarball list here: http://download.mono-project.com/sources/mono/)"
which fpm > /dev/null || (echo "Please install fpm (from gem, not apt-get)" && exit 1)
if mono --version > /dev/null 2>&1; then
echo "Mono is installed locally; please uninstall first" && exit 1
fi
WORK_DIR=/tmp/7digital-mono-work
rm -rf $WORK_DIR
mkdir $WORK_DIR
cd $WORK_DIR
MONO_VERSION=$1
MONO_DIR="mono-$MONO_VERSION"
SEVEND_VERSION="701"
MONO7D_VERSION=$MONO_VERSION'.'$SEVEND_VERSION
MONO7D_NAME="mono-7d"
echo "Downloading $MONO_VERSION"
wget http://download.mono-project.com/sources/mono/mono-$MONO_VERSION.tar.bz2
tar -jxf mono-$MONO_VERSION.tar.bz2
TARGET_DIR="$WORK_DIR/destdir"
mkdir $TARGET_DIR
cd "$WORK_DIR/$MONO_DIR"
./configure --prefix=/usr
make
make install DESTDIR="$TARGET_DIR"
cd $WORK_DIR
fpm -s dir \
-t deb \
-n $MONO7D_NAME \
-v $MONO7D_VERSION \
-C $TARGET_DIR \
-d "libglib2.0-dev (>= 0)" \
usr/bin usr/lib usr/share usr/include usr/etc
echo "Done. Your package should be ready in $WORK_DIR"
I wrote myself a litte script to install opencv under ubuntu14.04. Can I remove the directory 3party after the make install sorted the lib into system directories or are there dependencies? (Remove not only the MYBUILD but the complete 3party)
echo "\nInstall OpenCV?...<any key>\n"
read inp1; # $inp1
mkdir 3party;
cd 3party;
git clone https://github.com/Itseez/opencv.git
cd opencv;
mkdir MYBUILD;
cd MYBUILD;
#sudo mkdir -p /usr/local/lib/opencv;
cmake -L -DCMAKE_BUILD_TYPE=RELEASE -DCMAKE_INSTALL_PREFIX=/usr/local .. ;
echo"check if path is ok?...<any key> or abort";
read inp1; # $inp1
make;
#sudo mkdir -p /usr/local/lib/opencv;
make install;
cd ../../..;
chmod -R 777 3party;
echo "\nDone.\nPlease exit...<any key>";
EDIT: I did tag it cmake because the configuration step is performed with this build tool. Also the tutorial on the OpenCV website stated it. Please correct me if wrong.
Building OpenCV from Source Using CMake, Using the Command Line
Normally, after installation of any package its source and binary directories can be safetly removed. OpenCV follows this convention too.