Python -- Go back to an input variable in while loop (NOT beginning of the loop) - while-loop

I'm a beginner struggling with the logic/structure of my code.
I'm trying to code a virtual tour that allows the user to walk from one room to another in a house (just the hard code).
I start in the living room and I'm able to go to the rooms that are linked to the living room and come back.
Example: go outside, come back to the living room.
After that, I can't go back outside unless I copy and paste the input for outside under the living room input again.
Does that make sense? How can I go back to a certain input variable without having to copy and paste it again and again and end up in a never ending loop?
PS:not done with all the rooms
while True:
living_room = input("""
You are in the living room. There's a 55 inch TV, 2 sofas and a center table.
Options: Outside/ Kitchen/ Hallway
> """).lower()
if living_room == "outside":
outside = input("""
You are outside. It's a cloudy day and your house is located in a very quiet street, so, no cars are passing by.
Options: Living room/ Garage
> """).lower()
if outside == "living room":
living_room = input("""
You are in the living room. There's a 55 inch TV, 2 sofas and a center table.
Options: Outside/ Kitchen/ Hallway
> """).lower()
if outside == "garage":
garage = input("""
You are in the garage. There's a lot of junk in here, and your car is parked on the driveway.
Options: Kitchen/ Outside
> """).lower()
elif living_room == "kitchen":
kitchen = input("""
You are in the kitchen. There's a dinning table with 6 chairs, a refrigerator, stove, microwave, counter and sink.
Options: Living room/ Garage/ Backyard
> """).lower()
elif living_room == "hallway":
hallway = input("""
You are in the Hallway.
Options: Living room/ Bathroom 1/ Bedroom 1/ Bedroom 2/ Bedroom 3
> """).lower()

Related

Scraping contents of news articles

I was able to scrape the title, date, links, and content of news on these links: https://www.news24.com/news24/southafrica/crime-and-courts and https://www.news24.com/news24/southafrica/education. The output is saved in an excel file. However, I noticed that not all the contents inside the articles were scrapped. I have tried different methods on my "Getting content section of my code" Any help with this will be appreciate. Below is my code:
import sys, time
from bs4 import BeautifulSoup
import requests
import pandas as pd
from selenium import webdriver
from webdriver_manager.chrome import ChromeDriverManager
from datetime import timedelta
art_title = [] # to store the titles of all news article
art_date = [] # to store the dates of all news article
art_link = [] # to store the links of all news article
pagesToGet = ['southafrica/crime-and-courts', 'southafrica/education']
for i in range(0, len(pagesToGet)):
print('processing page : \n')
url = 'https://www.news24.com/news24/'+str(pagesToGet[i])
print(url)
driver = webdriver.Chrome(ChromeDriverManager().install())
driver.maximize_window()
try:
driver.get("https://www.news24.com/news24/" +str(pagesToGet[i]))
except Exception as e:
error_type, error_obj, error_info = sys.exc_info()
print('ERROR FOR LINK:', url)
print(error_type, 'Line:', error_info.tb_lineno)
continue
time.sleep(3)
scroll_pause_time = 1
screen_height = driver.execute_script("return window.screen.height;")
i = 1
while True:
driver.execute_script("window.scrollTo(0, {screen_height}{i});".format(screen_height=screen_height, i=i))
i += 1
time.sleep(scroll_pause_time)
scroll_height = driver.execute_script("return document.body.scrollHeight;")
if (screen_height) * i > scroll_height:
break
soup = BeautifulSoup(driver.page_source, 'html.parser')
news = soup.find_all('article', attrs={'class': 'article-item'})
print(len(news))
# Getting titles, dates, and links
for j in news:
titles = j.select_one('.article-item__title span')
title = titles.text.strip()
dates = j.find('p', attrs={'class': 'article-item__date'})
date = dates.text.strip()
address = j.find('a').get('href')
news_link = 'https://www.news24.com' + address
art_title.append(title)
art_date.append(date)
art_link.append(news_link)
df = pd.DataFrame({'Article_Title': art_title, 'Date': art_date, 'Source': art_link})
# Getting Content Section
news_articles = [] # to store the content of each news artcle
news_count = 0
for link in df['Source']:
print('\n')
start_time = time.monotonic()
print('Article No. ', news_count)
print('Link: ', link)
# Countermeasure for broken links
try:
if requests.get(link):
news_response = requests.get(link)
else:
print("")
except requests.exceptions.ConnectionError:
news_response = 'N/A'
# Auto sleep trigger after saving every 300 articles
sleep_time = ['100', '200', '300', '400', '500']
if news_count in sleep_time:
time.sleep(12)
else:
""
try:
if news_response.text:
news_data = news_response.text
else:
print('')
except AttributeError:
news_data = 'N/A'
news_soup = BeautifulSoup(news_data, 'html.parser')
try:
if news_soup.find('div', {'class': 'article__body'}):
art_cont = news_soup.find('div','article__body')
art = []
article_text = [i.text.strip().replace("\xa0", " ") for i in art_cont.findAll('p')]
art.append(article_text)
else:
print('')
except AttributeError:
article = 'N/A'
print('\n')
news_count += 1
news_articles.append(art)
end_time = time.monotonic()
print(timedelta(seconds=end_time - start_time))
print('\n')
# Create a column to add all the scraped text
df['News'] = news_articles
df.drop_duplicates(subset ="Source", keep = False, inplace = True)
# Dont store links
df.drop(columns=['Source'], axis=1, inplace=True)
df.to_excel('SA_news24_3.xlsx')
driver.quit()
I tried the following code in the Getting Content Section as well. However, it produced the same output.
article_text = [i.get_text(strip=True).replace("\xa0", " ") for i in art_cont.findAll('p')]
The site has various types of URLs so your code was omitting them since they found it malformed or some had to be subscribed to read.For the ones that has to be subscribed to read i have added "Login to read" followers by the link in articles . I ran this code till article number 670 and it didn't give any error. I had to change it from .xlsx to .csv since it was giving an error of openpyxl in python 3.11.0.
Full Code
import time
import sys
from datetime import timedelta
import pandas as pd
from bs4 import BeautifulSoup
import requests
import json
art_title = [] # to store the titles of all news article
art_date = [] # to store the dates of all news article
art_link = [] # to store the links of all news article
pagesToGet = ['southafrica/crime-and-courts',
'southafrica/education', 'places/gauteng']
for i in range(0, len(pagesToGet)):
print('processing page : \n')
if "places" in pagesToGet[I]:
url = f"https://news24.com/api/article/loadmore/tag?tagType=places&tag={pagesToGet[i].split('/')[1]}&pagenumber=1&pagesize=100&ishomepage=false&ismobile=false"
else:
url = f"https://news24.com/api/article/loadmore/news24/{pagesToGet[i]}?pagenumber=1&pagesize=1200&ishomepage=false&ismobile=false"
print(url)
r = requests.get(url)
soup = BeautifulSoup(r.json()["htmlContent"], 'html.parser')
news = soup.find_all('article', attrs={'class': 'article-item'})
print(len(news))
# Getting titles, dates, and links
for j in news:
titles = j.select_one('.article-item__title span')
title = titles.text.strip()
dates = j.find('p', attrs={'class': 'article-item__date'})
date = dates.text.strip()
address = j.find('a').get('href')
# Countermeasure for links with full url
if "https://" in address:
news_link = address
else:
news_link = 'https://www.news24.com' + address
art_title.append(title)
art_date.append(date)
art_link.append(news_link)
df = pd.DataFrame({'Article_Title': art_title,
'Date': art_date, 'Source': art_link})
# Getting Content Section
news_articles = [] # to store the content of each news artcle
news_count = 0
for link in df['Source']:
start_time = time.monotonic()
print('Article No. ', news_count)
print('Link: ', link)
news_response = requests.get(link)
news_data = news_response.content
news_soup = BeautifulSoup(news_data, 'html.parser')
art_cont = news_soup.find('div', 'article__body')
# Countermeasure for links with subscribe form
try:
try:
article = art_cont.text.split("Newsletter")[
0]+art_cont.text.split("Sign up")[1]
except:
article = art_cont.text
article = " ".join((article).strip().split())
except:
article = f"Login to read {link}"
news_count += 1
news_articles.append(article)
end_time = time.monotonic()
print(timedelta(seconds=end_time - start_time))
print('\n')
# Create a column to add all the scraped text
df['News'] = news_articles
df.drop_duplicates(subset="Source", keep=False, inplace=True)
# Dont store links
df.drop(columns=['Source'], axis=1, inplace=True)
df.to_csv('SA_news24_3.csv')
Output
,Article_Title,Date,News
0,Pastor gets double life sentence plus two 15-year terms for rape and murder of women,2h ago,"A pastor has been sentenced to two life sentences and two 15-year jail terms for rape and murder His modus operandi was to take the women to secluded areas before raping them and tying them to trees.One woman managed to escape after she was raped but the bodies of two others were found tied to the trees.The North West High Court has sentenced a 50-year-old pastor to two life terms behind bars and two 15-year jail terms for rape and murder.Lucas Chauke, 50, was sentenced on Monday for the crimes, which were committed in 2017 and 2018 in Temba in the North West.According to North West National Prosecuting Authority spokesperson Henry Mamothame, Chauke's first victim was a 53-year-old woman.He said Chauke pretended that he would assist the woman with her spirituality and took her to a secluded place near to a dam.""Upon arrival, he repeatedly raped her and subsequently tied her to a tree before fleeing the scene,"" Mamothame said. The woman managed to untie herself and ran to seek help. She reported the incident to the police, who then started searching for Chauke.READ | Kidnappings doubled nationally: over 4 000 cases reported to police from July to SeptemberOn 10 May the following year, Chauke pounced on his second victim - a 55-year-old woman.He took her to the same secluded area next to the dam, raped her and tied her to a tree before fleeing. This time his victim was unable to free herself.Her decomposed body was later found, still tied to the tree, Mamothame said. His third victim was targeted months later, on 3 August, in the same area. According to Mamothame, Chauke attempted to rape her but failed.""He then tied her to a tree and left her to die,"" he said. Chauke was charged in connection with her murder.He was linked to the crimes via DNA.READ | 'These are not pets': Man gives away his two pit bulls after news of child mauled to deathIn aggravation of his sentence, State advocate Benny Kalakgosi urged the court not to deviate from the prescribed minimum sentences, saying that the offences Chauke had committed were serious.""He further argued that Chauke took advantage of unsuspecting women, who trusted him as a pastor but instead, [he] took advantage of their vulnerability,"" Mamothame said. Judge Frances Snyman agreed with the State and described Chauke's actions as horrific.The judge also alluded to the position of trust that he abused, Mamothame said.Chauke was sentenced to life for the rape of the first victim, 15 years for the rape of the second victim and life for her murder, as well as 15 years for her murder. He was also declared unfit to possess a firearm."
1,'I am innocent': Alleged July unrest instigator Ngizwe Mchunu pleads not guilty,4h ago,"Former Ukhozi FM DJ Ngizwe Mchunu has denied inciting the July 2022 unrest.Mchunu pleaded not guilty to charges that stem from the incitement allegations.He also claimed he had permission to travel to Gauteng for work during the Covid-19 lockdown.""They are lying. I know nothing about those charges,"" alleged July unrest instigator, former Ukhozi FM DJ Ngizwe Brian Mchunu, told the Randburg Magistrate's Court when his trial started on Tuesday.Mchunu pleaded not guilty to the charges against him, which stems from allegations that he incited public violence, leading to the destruction of property, and convened a gathering in contravening of Covid-19 lockdown regulations after the detention of former president Jacob Zuma in July last year.In his plea statement, Mchunu said all charges were explained to him.""I am a radio and television personality. I'm also a poet and cultural activist. In 2020, I established my online radio.READ | July unrest instigators could face terrorism-related charges""On 11 July 2021, I sent invitations to journalists to discuss the then-current affairs. At the time, it was during the arrest of Zuma.""I held a media briefing at a hotel in Bryanston to show concerns over Zuma's arrest. Zuma is my neighbour [in Nkandla]. In my African culture, I regard him as my father.""Mchunu continued that he was not unhappy about Zuma's arrest but added: ""I didn't condone any violence. I pleaded with fellow Africans to stop destroying infrastructure. I didn't incite any violence.I said to them, 'My brothers and sisters, I'm begging you as we are destroying our country.'""He added:They are lying. I know nothing about those charges. I am innocent. He also claimed that he had permission to travel to Gauteng for work during the lockdown.The hearing continues."
2,Jukskei River baptism drownings: Pastor of informal 'church' goes to ground,5h ago,"A pastor of the church where congregants drowned during a baptism ceremony has gone to ground.Johannesburg Emergency Medical Services said his identity was not known.So far, 14 bodies have been retrieved from the river.According to Johannesburg Emergency Medical Services (EMS), 13 of the 14 bodies retrieved from the Jukskei River have been positively identified.The bodies are of congregants who were swept away during a baptism ceremony on Saturday evening in Alexandra.The search for the other missing bodies continues.Reports are that the pastor of the church survived the flash flood after congregants rescued him.READ | Jukskei River baptism: Families gather at mortuary to identify loved onesEMS spokesperson Robert Mulaudzi said they had been in contact with the pastor since the day of the tragedy, but that they had since lost contact with him.It is alleged that the pastor was not running a formal church, but rather used the Jukskei River as a place to perform rituals for people who came to him for consultations. At this stage, his identity is not known, and because his was not a formal church, Mulaudzi could not confirm the number of people who could have been attending the ceremony.Speaking to the media outside the Sandton fire station on Tuesday morning, a member of the rescue team, Xolile Khumalo, said: Thirteen out of the 14 bodies retrieved have been identified, and the one has not been identified yet.She said their team would continue with the search. ""Three families have since come forward to confirm missing persons, and while we cannot be certain that the exact number of bodies missing is three, we will continue with our search."""
3,Six-month-old infant ‘abducted’ in Somerset West CBD,9h ago,"Authorities are on high alert after a baby was allegedly abducted in Somerset West on Monday.The alleged incident occurred around lunchtime, but was only reported to Somerset West police around 22:00. According to Sergeant Suzan Jantjies, spokesperson for Somerset West police, the six-month-old baby boy was taken around 13:00. It is believed the infant’s mother, a 22-year-old from Nomzamo, entrusted a fellow community member and mother with the care of her child before leaving for work on Monday morning. However, when she returned home from work, she was informed that the child was taken. Police were apparently informed that the carer, the infant and her nine-year-old child had travelled to Somerset West CBD to attend to Sassa matters. She allegedly stopped by a liquor store in Victoria Street and asked an unknown woman to keep the baby and watch over her child. After purchasing what was needed and exiting the store, she realised the woman and the children were missing. A case of abduction was opened and is being investigated by the police’s Family Violence, Child Protection and Sexual Offences (FCS) unit. Police obtained security footage which shows the alleged abductor getting into a taxi and making off with the children. The older child was apparently dropped off close to her home and safely returned. However, the baby has still not been found. According to a spokesperson, FCS police members prioritised investigations immediately after the case was reported late last night and descended on the local township, where they made contact with the visibly “traumatised” parent and obtained statements until the early hours of Tuesday morning – all in hopes of locating the child and the alleged suspect.Authorities are searching for what is believed to be a foreign national woman with braids, speaking isiZulu.Anyone with information which could aid the investigation and search, is urged to call Captain Trevor Nash of FCS on 082 301 8910."
4,Have you herd: Dubai businessman didn't know Ramaphosa owned Phala Phala buffalo he bought - report,8h ago,"A Dubai businessman who bought buffaloes at Phala Phala farm reportedly claims he did not know the deal was with President Cyril Ramaphosa.Hazim Mustafa also claimed he was expecting to be refunded for the livestock after the animals were not delivered.He reportedly brought the cash into the country via OR Tambo International Airport, and claims he declared it.A Dubai businessman who reportedly bought 20 buffaloes from President Cyril Ramaphosa's Phala Phala farm claims that he didn't know the deal with was with the president, according to a report.Sky News reported that Hazim Mustafa, who reportedly paid $580 000 (R10 million) in cash for the 20 buffaloes from Ramaphosa's farm in December 2019, said initially he didn't know who the animals belonged to.A panel headed by former chief justice Sandile Ngcobo released a report last week after conducting a probe into allegations of a cover-up of a theft at the farm in February 2020.READ | Ramaphosa wins crucial NEC debate as parliamentary vote on Phala Phala report delayed by a weekThe panel found that there was a case for Ramaphosa to answer and that he may have violated the law and involved himself in a conflict between his official duties and his private business.In a statement to the panel, Mustafa was identified as the source of the more than $500 000 (R9 million) that was stolen from the farm. Among the evidence was a receipt for $580 000 that a Phala Phala employee had written to ""Mr Hazim"".According to Sky News, Mustafa said he celebrated Christmas and his wife's birthday in Limpopo in 2019, and that he dealt with a broker when he bought the animals.He reportedly said the animals were to be prepared for export, but they were never delivered due to the Covid-19 lockdown. He understood he would be refunded after the delays.He also reportedly brought the cash into the country through OR Tambo International Airport and said he declared it. Mustafa also told Sky News that the amount was ""nothing for a businessman like [him]"".READ | Here's the Sudanese millionaire - and his Gucci wife - who bought Ramaphosa's buffaloThe businessman is the owner Sudanese football club Al Merrikh SC. He is married to Bianca O'Donoghue, who hails from KwaZulu-Natal. O'Donoghue regularly takes to social media to post snaps of a life of wealth – including several pictures in designer labels and next to a purple Rolls Royce Cullinan, a luxury SUV worth approximately R5.5 million.Sudanese businessman Hazim Mustafa with his South African-born wife, Bianca O'Donoghue.Facebook PHOTO: Bianca O'Donoghue/Facebook News24 previously reported that he also had ties to former Sudanese president, Omar al-Bashir.There have been calls for Ramaphosa to step down following the saga. A motion of no confidence is expected to be submitted in Parliament.He denied any wrongdoing and said the ANC's national executive committee (NEC) would decide his fate.Do you have a tipoff or any information that could help shape this story? Email tips#24.com"
5,Hefty prison sentence for man who killed stranded KZN cop while pretending to offer help,9h ago,"Two men have been sentenced – one for the murder of a KwaZulu-Natal police officer, and the other for an attempt to rob the officer.Sergeant Mzamiseni Mbele was murdered in Weenen in April last year.He was attacked and robbed when his car broke down on the highway while he was on his way home.A man who murdered a KwaZulu-Natal police officer, after pretending that he wanted to help him with his broken-down car, has been jailed.A second man, who was only convicted of an attempt to rob the officer, has also been sentenced to imprisonment.On Friday, the KwaZulu-Natal High Court in Madadeni sentenced Sboniso Linda, 36, to an effective 25 years' imprisonment, and Nkanyiso Mungwe, 25, to five years' imprisonment.READ | Alleged house robber shot after attack at off-duty cop's homeAccording to Hawks spokesperson, Captain Simphiwe Mhlongo, 39-year-old Sergeant Mzamiseni Mbele, who was stationed at the Msinga police station, was on his way home in April last year when his car broke down on the R74 highway in Weenen.Mbele let his wife know that the car had broken down. While stationary on the road, Linda and Mungwe approached him and offered to help.Mhlongo said: All of a sudden, [they] severely assaulted Mbele. They robbed him of his belongings and fled the scene. A farm worker found Mbele's body the next dayA case of murder was reported at the Weenen police station and the Hawks took over the investigation.The men were arrested.""Their bail [application] was successfully opposed and they appeared in court several times until they were found guilty,"" Mhlongo added.How safe is your neighbourhood? Find out by using News24's CrimeCheckLinda was sentenced to 20 years' imprisonment for murder and 10 years' imprisonment for robbery with aggravating circumstances. Half of the robbery sentence has to be served concurrently, leaving Linda with an effective sentence of 25 years.Mungwe was sentenced to five years' imprisonment for attempted robbery with aggravating circumstances."

How to find results being between two values of different keys with Redis?

I'm creating a game matchmaking system using Redis based on MMR, which is a number that pretty much sums up the skill of a player. Therefore the system can match him/her with others who are pretty much with the same skill.
For example if a player with MMR of 1000 joins the queue, system will try to find other ppl with MMR of range 950 to 1050 to match with this player. But if after one minute it cannot find any player with given stats it will scale up the range to 900 to 1100 (a constant threshold).
What I want to do is really easy with relational database design but I can't figure out how to do it with Redis.
The queue table implementation would be like this:
+----+---------+------+-------+
| ID | USER_ID | MMR | TRIES |
+----+---------+------+-------+
| 1 | 50 | 1000 | 1 |
| 2 | 70 | 1500 | 1 |
| 3 | 350 | 1200 | 1 |
+----+---------+------+-------+
So when a new player queues up, it will check it's MMR against other players in the queue if it finds one between 5% Threshold it will match the two players if not it will add the new player to the table and wait for new players to queue up to compare or to pass 1 minute and the cronjob increment the tries and retry to match players.
The only way I can imagine is to use two separate keys for the low and high of each player in the queue like this
MatchMakingQueue:User:1:Low => 900
MatchMakingQueue:User:1:High => 1100
but the keys will be different and I can't get for example all users in between range of low of 900 to high of 1100!
I hope I've been clear enough any help would be much appreciated.
As #Guy Korland had suggested, a Sorted Set can be used to track and match players based on their MMR, and I do not agree with the OP's "won't scale" comment.
Basically, when a new player joins, the ID is added to a zset with the MMR as its score.
ZADD players:mmr 1000 id:50
The matchmaking is made for each user, e.g. id:50 with the following query:
ZREVRANGEBYSCORE players:mmrs 1050 950 LIMIT 0 2
A match is found if two IDs are returned and at least one of them is different than that of the new player. To make the match, both IDs (the new player's and the matched with one) need to be removed from the set - I'd use a Lua script to implement this piece of logic (matching and removing) for atomicity and communication reduction, but it can be done in the client as well.
There are different ways to keep track of the retries, but perhaps the simplest one is to use another Sorted Set, where the score is that metric.
The following pseudo Redis Lua code is a minimal example of the approach:
local kmmrs, kretries = KEYS[1], KEYS[2]
local id = ARGV[1]
local mmr = redis.call('ZSCORE', kmmrs, id)
local retries = redis.call('ZSCORE', kretries, id)
local min, max = mmr*(1-0.05*retries), mmr*(1+0.05*retries)
local candidates = redis.call('ZREVRANGEBYSCORE', kmmrs, max, min, 'LIMIT', 0, 2)
if #candidates < 2 then
redis.call('ZINCRBY', kretries, 1, id)
return nil
end
local reply
if candidates[1] ~= id then
reply = candidates[1]
else
reply = candidates[2]
end
redis.call('ZREM', kmmrs, id, reply)
redis.call('ZREM', kretries, id, reply)
return reply
Let me get the problem right! Your problem is that you want to find all the users in a given range of MMR value. What if You make other users say that "I'm falling in this range".
Read about Redis Pub/Sub.
When a user joins in, publish its MMR to rest of the players.
Write the code on the user side to check if his/her MMR is falling in the range.
If it is, user will publish back to a channel that it is falling in that range. Else, user will silently discard the message.
repeat these steps if you get no response back in 1 minute.
You can make one channel (let's say MatchMMR) for all users to publish MMR for match request which should be suscribed by all the users. And make user specific channel in case somebody has a MMR in the calculated range.
Form you published messages such that you can send all the information like "retry count", "match range percentage", "MMR value" etc. so that your code at user side can calculate if it is the right fit for the MMR.
Read mode about redis Pub/Sub at: https://redis.io/topics/pubsub

BS4 - grabbing information from something youve already parsed

hey this was kind of explained to me before but having trouble appying the same thing now to almost the same page...
page = 'http://www.imdb.com/genre/action/?ref_=gnr_mn_ac_mp'
table = soup.find_all("table", {"class": "results"})
for item in list(table):
for info in item.contents[1::2]:
info.a.extract()
link = info.a['href']
print(link)
name = info.text.strip()
print(name)
code above tries to capture the link to each page of each film contained in the a tag in the variable info... and the text in it has the name of each film but instead i get all the text. is there any way of just getting the name?
thanks guys in advance!!!
Just just need to pull the text from the anchor tag inside the td with the class title:
In [15]: from bs4 import BeautifulSoup
In [16]: import requests
In [17]: url = "http://www.imdb.com/genre/action/?ref_=gnr_mn_ac_mp"
In [18]: soup = BeautifulSoup(requests.get(url,"lxml").content)
In [19]: for td in soup.select("table.results td.title"):
....: print(td.a.text)
....:
X-Men: Apocalypse
Warcraft
Captain America: Civil War
The Do-Over
Teenage Mutant Ninja Turtles: Out of the Shadows
The Angry Birds Movie
The Nice Guys
Batman v Superman: Dawn of Justice
Suicide Squad
Deadpool
Gods of Egypt
Zootopia
13 Hours: The Secret Soldiers of Benghazi
Now You See Me 2
The Brothers Grimsby
Hardcore Henry
Monster Trucks
Independence Day: Resurgence
Star Trek Beyond
The Legend of Tarzan
Deepwater Horizon
X-Men: Days of Future Past
Star Wars: The Force Awakens
X-Men: First Class
The 5th Wave
Pretty much all the data you would want is inside the td with the title class:
So if you wanted the outline also all you need is the text from the span.outline:
In [24]: for td in soup.select("table.results td.title"):
....: print(td.a.text)
....: print(td.select_one("span.outline").text)
....:
X-Men: Apocalypse
With the emergence of the world's first mutant, Apocalypse, the X-Men must unite to defeat his extinction level plan.
Warcraft
The peaceful realm of Azeroth stands on the brink of war as its civilization faces a fearsome race of...
Captain America: Civil War
Political interference in the Avengers' activities causes a rift between former allies Captain America and Iron Man.
The Do-Over
Two down-on-their-luck guys decide to fake their own deaths and start over with new identities, only to find the people they're pretending to be are in even deeper trouble.
Teenage Mutant Ninja Turtles: Out of the Shadows
As Shredder joins forces with mad scientist Baxter Stockman and henchmen Bebop and Rocksteady to take over the world, the Turtles must confront an even greater nemesis: the notorious Krang.
The Angry Birds Movie
Find out why the birds are so angry. When an island populated by happy, flightless birds is visited by mysterious green piggies, it's up to three unlikely outcasts - Red, Chuck and Bomb - to figure out what the pigs are up to.
The Nice Guys
A mismatched pair of private eyes investigate the apparent suicide of a fading porn star in 1970s Los Angeles.
Batman v Superman: Dawn of Justice
Fearing that the actions of Superman are left unchecked, Batman takes on the Man of Steel, while the world wrestles with what kind of a hero it really needs.
Suicide Squad
A secret government agency recruits imprisoned supervillains to execute dangerous black ops missions in exchange for clemency.
Deadpool
A former Special Forces operative turned mercenary is subjected to a rogue experiment that leaves him with accelerated healing powers, adopting the alter ego Deadpool.
Gods of Egypt
Mortal hero Bek teams with the god Horus in an alliance against Set, the merciless god of darkness, who has usurped Egypt's throne, plunging the once peaceful and prosperous empire into chaos and conflict.
Zootopia
In a city of anthropomorphic animals, a rookie bunny cop and a cynical con artist fox must work together to uncover a conspiracy.
13 Hours: The Secret Soldiers of Benghazi
During an attack on a U.S. compound in Libya, a security team struggles to make sense out of the chaos.
Now You See Me 2
The Four Horsemen resurface and are forcibly recruited by a tech genius to pull off their most impossible heist yet.
The Brothers Grimsby
A new assignment forces a top spy to team up with his football hooligan brother.
Hardcore Henry
Henry is resurrected from death with no memory, and he must save his wife from a telekinetic warlord with a plan to bio-engineer soldiers.
Monster Trucks
Looking for any way to get away from the life and town he was born into, Tripp (Lucas Till), a high school senior...
Independence Day: Resurgence
Two decades after the first Independence Day invasion, Earth is faced with a new extra-Solar threat. But will mankind's new space defenses be enough?
Star Trek Beyond
The USS Enterprise crew explores the furthest reaches of uncharted space, where they encounter a mysterious new enemy who puts them and everything the Federation stands for to the test.
The Legend of Tarzan
Tarzan, having acclimated to life in London, is called back to his former home in the jungle to investigate the activities at a mining encampment.
Deepwater Horizon
A story set on the offshore drilling rig Deepwater Horizon, which exploded during April 2010 and created the worst oil spill in U.S. history.
X-Men: Days of Future Past
The X-Men send Wolverine to the past in a desperate effort to change history and prevent an event that results in doom for both humans and mutants.
Star Wars: The Force Awakens
Three decades after the defeat of the Galactic Empire, a new threat arises. The First Order attempts to rule the galaxy and only a ragtag group of heroes can stop them, along with the help of the Resistance.
X-Men: First Class
In 1962, the United States government enlists the help of Mutants with superhuman abilities to stop a malicious dictator who is determined to start World War III.
The 5th Wave
Four waves of increasingly deadly alien attacks have left most of Earth decimated. Cassie is on the run, desperately trying to save her younger brother.
For runtime td.select_one("span.runtime").text etc..
Just like how you got the link by doing
info.a['href']
You can also get the title of the movie by doing
info.a['title']
Hopefully this is what you're looking for!

Finding a string embedded with several strings in a single cell

Working on a large macro to automate an end of day email process that involves sending emails to different customers. Everything is working fairly well except in the several instances that some firms have different emails for different employees. It would be simple if these employees were the only ones that would be sent to that email, but that is of course not the case.
I'm struggling to find a solution to finding the names and referencing the email. But referencing multiple names without knowing how many names it could be ahead of time (meaning in the future a firm could have 10 employees with the same email confirmation and some may have as little as 1 (for those that require separate emails per employee)). Would I use an array for this and test against the array? I would also need to store the employee names in order to ensure duplicates aren't created. See Text example and code below:
The names are stored in a sheet named emailMaster in this format say starting in cell(1,3) (Joe GoodGuy; James Johanson; Jimmy TheHat (All encapsulated in one cell)) and the email they correspond to is found at .Offset(0,1). To clarify, these gentlemen may work for the firm "CodersUnited", but their may be another group from the firm "CodersUnited", who require a different email address for their end of day receipts and they could be in cell(1,5) (Jimmy John; Franky TwoToes; Jimmy Hendrix) and their corresponding email found in .Offset(0,1).
Row ____________________C____________________ __D___ ___________________E____________________ __F__
1 Joe GoodGuy; James Johanson; Jimmy TheHat Emails Jimmy John; Frank TwoToes; Jimmy Hendrix Email
The solution below only works if their is one name corresponding to one email. There needs to be multiple names corresponding to one email.
'Gets firm name
If firmName = emailMaster.Cells(emrow_num, 1) Then
continue = False
cFirm = firmName
iFirm = emailMaster.Cells(emrow_num, 2)
If IsEmpty(emailMaster.Cells(emrow_num, 4)) = True Then
firmEmail = emailMaster.Cells(emrow_num, 3)
'Tests for separate employee emails
ElseIf emailMaster.Cells(emrow_num, 4) = "Yes" Then
empSeparate = True
'Captures separate emp email
Set empTestFinder = emailMaster.Rows(emrow_num).Find(empName)
empFinder = empTestFinder.Address
firmEmail = emailMaster.Range(empFinder).Offset(0, 1)
Else
MsgBox ("Firm designated as different emails for employees. Either change designation of firm or add employee. Contact dev for more assistance.")
Exit Sub
End If
End If
In my view you are mixing three tasks:
modelling your data
determining a convenient method of holding that data in Excel
determining a convenient method of holding that data in VBA variables
You need to tackle these tasks in sequence but be willing to revert to a previous task if you encounter problems attempting the current task..
Below is a data model which I have deduced from your question. This model does not conform to any standard modelling notation but, if you are not a data modeller, I think you will find this notation easier to understand.
You need to send emails to all your customers. I have shown three example customers. At Customer1 there is only one person you send emails to who has there own email address. At Customer2, there are three people to whom you send emails who each have their own email address. Customer3 is more complicated. Person13 has their own address but the other contacts share addresses. For example, EmailAddr5 is shared by Person5, Person6 and Person7.
Customer1────EmailAddr1────Person1
Customer2─┬──EmailAddr2────Person2
├──EmailAddr3────Person3
└──EmailAddr4────Person4
Customer3─┬──EmailAddr5─┬──Person5
│ ├──Person6
│ └──Person7
├──EmailAddr6─┬──Person8
│ ├──Person9
│ ├──Person10
│ ├──Person11
│ └──Person12
└──EmailAddr7────Person13
Is this a correct representation of your data? I would summarise this as:
There are 1 or many PERSONs per EMAILADDR
There are 1 or many EMAILADDRs per CUSTOMER
If you are not familiar with modelling data, this may be confusing at first but I believe that with a little study it will become clear.
The question you need to answer is: “Is this a complete description of my data?” Only when you are convinced there are no special cases not covered by this model can you proceed to Task 2.
Unless your final model is much more complicated than mine, I do not believe you will need two or more worksheets to hold this data. So, task 2 is to map your data model onto an Excel worksheet.
During task2, the person to consider is the user who will create and maintain this data. For example, I would have thought holding multiple people in a single cell would be awkward to maintain. How does this data arrive? Does Acme Supplies tell you to contact John Smith whose email address is Sales#AcmeSuppliers.Com or do they tell you use Sales#AcmeSuppliers.Com to contact any of: Angela Brown, Cherry White and John Smith? If data arrives as “name – address”, the model above may be correct but inconvenient. Would this be a convenient arrangement of the data for the user to maintain?
Acme Supplies | Brown, Angela | Sales#AcmeSuppliers.Com
Acme Supplies | Chester, Neal | Admin#AcmeSuppliers.Com
Acme Supplies | Smith, John | Sales#AcmeSuppliers.Com
Acme Supplies | White, Cherry | Sales#AcmeSuppliers.Com
With this arrangement, there is a row per person per company.
If you really think your data model is correct, how about:
Acme Supplies|Admin#AcmeSuppliers.Com|Chester, Neal|Sales#AcmeSuppliers.Com|Brown, Angela|Smith, John|White, Cherry|
where I am using vertical lines to represent cell boundaries.
What I done is take:
Customer3─┬──EmailAddr5─┬──Person5
│ ├──Person6
│ └──Person7
├──EmailAddr6─┬──Person8
│ ├──Person9
│ ├──Person10
│ ├──Person11
│ └──Person12
└──EmailAddr7────Person13
and arrange it as:
Customer3|EmailAddr5|Person5|Person6|Person7|EmailAddr6|Person8|Person9| and so on
This could work because every address contains the symbol “#” while no name contains this symbol.
As you develop the mapping from the data model to Excel, you may need to revise the data model. Your original model may be technically correct but implementation in Excel may be inconvenient. Provided your revised model can handle any combination of company, address and name you can envisage and providing that revised model maps cleanly to Excel you will be all right.
Lastly, task 3 is to map the Excel worksheet to VBA variables. This depends on how you need to process the data. For example, you might have a list like:
CompanyA, PersonZ
CompanyB, PersonY
CompanyB, PersonX
: :
With this it might be easier to leave the data in the worksheet and have code like this:
For each line of list
Search for Person
If not found
Report “No such person”
Else
Record row on which first Person found
Do While True
If Person belongs to Company Then
Generate email
Exit Do
End If
Search for next Person
If row for Person is the row for the first Person Then
Report “No such person”
Exit Do
End If
Loop
End If
Next
I think the above is as much as I can offer because there is too much uncertainty about your requirement. This may be enough for you to solve your own problem. If not, you need update your question clarify your requirement.
Perhaps you would like a function like the below:
Function FoundEMail(groupArray As Variant, emailArray As Variant) As Boolean
Dim PersonInGroup As Variant, PersonInEMail As Variant, PersonFound As Boolean
For Each PersonInGroup In groupArray
PersonFound = False
For Each PersonInEMail In emailArray
PersonFound = StrConv(Trim(PersonInGroup), vbUpperCase) = StrConv(Trim(PersonInEMail), vbUpperCase)
If PersonFound Then Exit For
Next PersonInEMail
If Not PersonFound Then Exit Function
Next PersonInGroup
FoundEMail = True
End Function
So instead of If firmName = emailMaster.Cells(emrow_num, 1) Then you might have something like If FoundEMail(Split(firmName,";"),Split(emailMaster.Cells(emrow_num, 1),";")) Then

JES - Jython - Drawing a line between points on an image

I am working on an assignment where I need to draw a line between points on a map. I built it up using if statements, but that limits how many times I can do something so want to use a loop.
The code I have so far is below, I can add the cities and draw a line, but it draws a line to itself rather than from a start point to the next point (and continue on)
Can anybody please help at all?
def level1():
cityXvalue = [45,95,182,207,256,312,328,350,374,400]
cityYvalue = [310,147,84,201,337,375,434,348,335,265]
# Display the map image
map = makePicture(getMediaPath("map.png"))
show(map)
number = 0
# Ask user to enter numbers of the cities they wish to visit
cities = requestInteger("Enter the number of the city you would like to visit")
# Draw a line between previously entered point and current one
while cities > number:
city = requestInteger("Please choose a city number")
addLine(map,cityXvalue[city],cityYvalue[city], cityXvalue[city], cityYvalue[city])
repaint(map)