I passing data into a line series but I cannot dynamically add anything to series.name I just get the string rather that teh variable.
I tried using .dataFields.name but this is teh incorrect syntax.
Please advise?
J
var series = chart.series.push(new am4charts.LineSeries());
series.dataFields.valueY = "value"+ seriesId;
series.dataFields.dateX = "date";
series.name = "BrandNM"+ seriesId;
series.strokeWidth = 2;
Related
I am trying to update DATBI field of A* pricing condition tables using the data coming from excel file.I have tried below approaches but unable to update the entry as DATBI is key field. It creates new record instead of updating the existing one. Approaches:
FM: RV_CONDITION_COPY(with mai tain_ mode as B)
FM: RV_CONDITION_MAINTENANCE(using maintain_mode as B)
BAPI_PRICES_CONDITIONS(It changes KONH table but not A* table.Also, as per note#1135984,we shouldn't be using it)
FM:RV_KONDITION_SICHERN_V13A in update mode(This gives sy-subrc 4 in this FM post update A* from table__ syntax as the datbi is new coming from my excel file)
Idoc COND_A04(This also creates new entry instead of updating existing one)
BDC is the only approach that I can think of but looking at VK12 screen, it has been observed that based on key combination and its underlying A* tables, it should be dynamic.
Can you please help in this regard?Is there any dynamic BDC for VK12?
Undoubtedly we shouldn't use BAPI_PRICES_CONDITIONS, and note 94443 describes the problems it can cause when you push incorrect conditions into system, but sometime there is no way to avoid it. I tried this FM and it definitely worked on my system.
Here is the code for updating A009 table:
* header table
APPEND INITIAL LINE TO lt_head ASSIGNING <fs_head>.
<fs_head>-operation = '009'.
<fs_head>-cond_usage = 'A'.
<fs_head>-table_no = '007'.
<fs_head>-applicatio = 'V'.
<fs_head>-cond_type = 'ZP15'.
<fs_head>-valid_from = '20210103'.
<fs_head>-valid_to = '99991231'.
<fs_head>-cond_no = '$000000001'.
<fs_head>-varkey = 'BE110101001000635199993112'.
** items
APPEND INITIAL LINE TO lt_konh ASSIGNING <fs_konh>.
<fs_konh>-operation = '009'.
<fs_konh>-cond_no = '$000000001'.
<fs_konh>-cond_usage = 'A'.
<fs_konh>-table_no = '007'.
<fs_konh>-applicatio = 'V'.
<fs_konh>-cond_type = 'ZP15'.
<fs_konh>-valid_from = '20210103'.
<fs_konh>-valid_to = '99991231'.
<fs_konh>-created_by = sy-uname.
<fs_konh>-creat_date = sy-datum.
APPEND INITIAL LINE TO lt_konp ASSIGNING <fs_konp>.
<fs_konp>-operation = '009'.
<fs_konp>-cond_no = '$000000001'.
<fs_konp>-cond_count = '01'.
<fs_konp>-applicatio = 'V'.
<fs_konp>-cond_type = 'ZP15'.
<fs_konp>-scaletype = 'A'.
<fs_konp>-scalebasin = space.
<fs_konp>-scale_qty = '0'.
<fs_konp>-cond_p_unt = '1'.
<fs_konp>-cond_unit = 'ΠΆ'.
<fs_konp>-calctypcon = 'C'.
<fs_konp>-cond_value = '160'.
<fs_konp>-condcurr = 'EUR'.
CALL FUNCTION 'BAPI_PRICES_CONDITIONS'
EXPORTING
pi_initialmode = abap_true
TABLES
ti_bapicondct = lt_head
ti_bapicondhd = lt_konh
ti_bapicondit = lt_konp
ti_bapicondqs = lt_konm
ti_bapicondvs = lt_konw
to_bapiret2 = lt_return
to_bapiknumhs = lt_knumh
to_mem_initial = lt_buffer
EXCEPTIONS
update_error = 1
OTHERS = 2.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = abap_true.
I tried the above code and record with the specified key was properly updated with new valid to field (DATAB). Updating DATBI is a bit more complicated since it is included in the primary key and cannot be updated in one step. You must delete the record with the old DATBI and the create the new one. In this blog you can read more about how to use this BAPI:
https://blogs.sap.com/2019/07/22/how-to-use-bapi_prices_conditions-to-mass-upload-price-conditions/
I'm struggling to format a InfluxDB query using placeholders.
Here I query with multiple placeholders.
The values are defined in the placeholders object, as seen below,
let query = `SELECT grid_ref_x, grid_ref_y, label FROM position
WHERE "label" = $<label> and time >= $<from> - $<interval>`;
const placeholders = {label: 'person', from: 'now()', interval: '5m'};
const resp = await influx.query(query, { placeholders });
Once sent, an error 400 - error parsing query: empty bound parameter
In the error I can see the GET request, where it appears that the Influx library has correctly formatted the placeholders under "params".
/query?p=root&u=root&db=heatmap&epoch=&q=SELECT grid_ref_x, grid_ref_y, label FROM position WHERE label = $<label> and time >= $<from> - $<interval>&rp=¶ms={"from":"now()","interval":"5h","label":"person"}
How do I correctly format my query?
Have you tried changing
let query = `SELECT grid_ref_x, grid_ref_y, label FROM position
WHERE "label" = $<label> and time >= $<from> - $<interval>`;
TO
let query = `SELECT grid_ref_x, grid_ref_y, label FROM position
WHERE "label" = $label and time >= $from - $interval`;
The difference is that you reference the Placeholders or bind parameters using $variable_name instead of $<variable_name>. Assuming you're using node_influx, you can remove the double quotes on your tags and it'll still work.
I used this PR as reference https://github.com/node-influx/node-influx/issues/587
I have a field that I title, nothing. As of yet it has no value. It is 261 characters at the end of my fixed width file, largefile. Now, I am being told to break this 261 character field into 10 separate fields. I can reimport it using this new schema. I found something else on this site I found something else on another site and it makes sense but it seems as if I am missing a few tidbits of code. Any thoughts on if I am going about this the right way?
I have tried the following code but ending in error.
update dbo.largefile
set blank1 = substring(nothing,1,9)
unkn1 = substring(nothing,10,1)
unkn2 = substring(nothing,11,1)
blank2 = substring(nothing,12,35)
unkn3 = substring(nothing,47,4)
unkn4 = substring(nothing,51,1)
contact = substring(nothing,52,35)
title = substring(nothing,87,35)
contactphone = substring(nothing,122,10)
website = substring(nothing,132,204)
unkn5 = substring(nothing,203,59);
Msg 102, Level 15, State 1, Line 3
Incorrect syntax near 'unkn1'.
You are missing commas after each assignment:
update dbo.largefile
set blank1 = substring(nothing,1,9),
unkn1 = substring(nothing,10,1),
unkn2 = substring(nothing,11,1),
blank2 = substring(nothing,12,35),
unkn3 = substring(nothing,47,4),
unkn4 = substring(nothing,51,1),
contact = substring(nothing,52,35),
title = substring(nothing,87,35),
contactphone = substring(nothing,122,10),
website = substring(nothing,132,204),
unkn5 = substring(nothing,203,59);
I've developed an apex API on salesforce which performs a SOQL on a list of CSV data. It has been working smoothly until yesterday, after making a few changes to code that follow the SOQL query, I started getting a strange 500 error:
[{"errorCode":"APEX_ERROR","message":"System.UnexpectedException:
common.exception.SfdcSqlException: ORA-01460: unimplemented or
unreasonable conversion requested\n\n\nselect /SampledPrequery/
sum(term0) \"cnt0\",\nsum(term1) \"cnt1\",\ncount(*)
\"totalcount\",\nsum(term0 * term1) \"combined\"\nfrom (select /*+
ordered use_nl(t_c1) /\n(case when (t_c1.deleted = '0') then 1 else 0
end) term0,\n(case when (upper(t_c1.val18) = ?) then 1 else 0 end)
term1\nfrom (select /+ index(sampleTab AKENTITY_SAMPLE)
*/\nentity_id\nfrom core.entity_sample sampleTab\nwhere organization_id = '00Dq0000000AMfz'\nand key_prefix = ?\nand rownum <=
?) sampleTab,\ncore.custom_entity_data t_c1\nwhere
t_c1.organization_id = '00Dq0000000AMfz'\nand t_c1.key_prefix = ?\nand
sampleTab.entity_id =
t_c1.custom_entity_data_id)\n\nClass.labFlows.queryContacts: line 13,
column 1\nClass.labFlows.fhaQuery: line 6, column
1\nClass.zAPI.doPost: line 10, column 1"}]
the zAPI.doPost() is simply our router class which takes in the post payload as well as the requested operation. It then calls whatever function the operation requests. In this case, the call is to labFlows.queryContacts():
Public static Map<string,List<string>> queryContacts(string[] stringArray){
//First get the id to get to the associative entity, Contact_Deals__c id
List<Contact_Deals__c> dealQuery = [SELECT id, Deal__r.id, Deal__r.FHA_Number__c, Deal__r.Name, Deal__r.Owner.Name
FROM Contact_Deals__c
Where Deal__r.FHA_Number__c in :stringArray];
//Using the id in the associative entity, grab the contact information
List<Contact_Deals__c> contactQuery = [Select Contact__r.Name, Contact__r.Id, Contact__r.Owner.Name, Contact__r.Owner.Id, Contact__r.Rule_Class__c, Contact__r.Primary_Borrower_Y_N__c
FROM contact_deals__c
WHERE Id in :dealQuery];
//Grab all deal id's
Map<string,List<string>> result = new Map<string,List<string>>();
for(Contact_Deals__c i:dealQuery){
List<string> temp = new list<string>();
temp.add(i.Deal__r.Id);
temp.add(i.Deal__r.Owner.Name);
temp.add(i.Deal__r.FHA_Number__c);
temp.add(i.Deal__r.Name);
for(Contact_Deals__c j:contactQuery){
if(j.id == i.id){
//This doesn't really help if there are multiple primary borrowers on a deal - but that should be a SF worflow rule IMO
if(j.Contact__r.Primary_Borrower_Y_N__c == 'Yes'){
temp.add(j.Contact__r.Owner.Id);
temp.add(j.Contact__r.Id);
temp.add(j.Contact__r.Name);
temp.add(j.Contact__r.Owner.Name);
temp.add(j.Contact__r.Rule_Class__c);
break;
}
}
}
result.put(i.Deal__r.id, temp);
}
return result;
}
The only thing I've changed is moving the temp list to add elements before the inner-loop (previously temp would only capture things from the inner-loop). The error above is referencing line 13, which is specifically the first SOQL call:
List<Contact_Deals__c> dealQuery = [SELECT id, Deal__r.id, Deal__r.FHA_Number__c, Deal__r.Name, Deal__r.Owner.Name
FROM Contact_Deals__c
Where Deal__r.FHA_Number__c in :stringArray];
I've tested this function in the apex anonymous window and it worked perfectly:
string a = '00035398,00035401';
string result = zAPI.doPost(a, 'fhaQuery');
system.debug(result);
Results:
13:36:54:947 USER_DEBUG
[5]|DEBUG|{"a09d000000HRvBAD":["a09d000000HRvBAD","Contacta","11111111","Plaza
Center
Apts"],"a09d000000HsVAD":["a09d000000HsVAD","Contactb","22222222","The
Garden"]}
So this is working. The next part is maybe looking at my python script that is calling the API,
def origQuery(file_name, operation):
csv_text = ""
with open(file_name) as csvfile:
reader = csv.reader(csvfile, dialect='excel')
for row in reader:
csv_text += row[0]+','
csv_text = csv_text[:-1]
data = json.dumps({
'data' : csv_text,
'operation' : operation
})
results = requests.post(url, headers=headers, data=data)
print results.text
origQuery('myfile.csv', 'fhaQuery')
I've tried looking up this ORA-01460 apex error, but I can't find anything that will help me fix this issue.
Can any one shed ore light on what this error is telling me?
Thank you all so much!
It turns out the error was in the PY script. For some reason the following code isn't functioning as it is supposed to:
with open(file_name) as csvfile:
reader = csv.reader(csvfile, dialect='excel')
for row in reader:
csv_text += row[0]+','
csv_text = csv_text[:-1]
This was returning one very long string that had zero delimiters. The final line in the code was cutting off the delimiter. What I needed instead was:
with open(file_name) as csvfile:
reader = csv.reader(csvfile, dialect='excel')
for row in reader:
csv_text += row[0]+','
csv_text = csv_text[:-1]
Which would cut off the final ','
The error was occurring because the single long string was above 4,000 characters.
I have two tables, RESTAURANT and HOURS with REST_ID as the key between the two tables. i receive an error when I get to the first line of code to add HOURs. The error asks to create an instance of the object but Intellisence allows me to call that table reference. Here is a snipped of the code:
RESTAURANT addRest = new RESTAURANT();
addRest.REST_NAME = r_name;
addRest.REST_STREET1 = r_street;
addRest.REST_PHONE = r_phone;
addRest.REST_WEBSITE = r_web;
addRest.REST_DESC = r_desc;
addRest.HOUR.HOURS_SUN = h_su;
addRest.HOUR.HOURS_MON = h_mo;
addRest.HOUR.HOURS_TUE = h_tu;
addRest.HOUR.HOURS_WED = h_we;
addRest.HOUR.HOURS_THU = h_th;
addRest.HOUR.HOURS_FRI = h_fr;
addRest.HOUR.HOURS_SAT = h_sa;
addRest.HOURReference.EntityKey = new EntityKey("FVTCEntities.HOURS", "HOURS", 1);
db.AddToRESTAURANTs(addRest);
db.SaveChanges();
HOUR is a contained object inside of RESTAURANT. You need to instantiate it before setting properties on it (like a typical C# object):
addRest.HOUR = new HOUR();
addRest.HOUR.HOURS_SUN = h_su;
...
You haven't created an HOUR object on your RESTAURANT, so that navigation property is null.
...
addRest.REST_DESC = r_desc;
addRest.HOUR = new HOUR();
addRest.HOUR.HOURS_SUN = h_su;
...