PostgreSQL PK sequence and Auto incrment problem after moving exisitng MS SQL DB to Postgres [duplicate] - sql

Question

I ran into the problem that my primary key sequence is not in sync with my table rows.
That is, when I insert a new row I get a duplicate key error because the sequence implied in the serial datatype returns a number that already exists.
It seems to be caused by import/restores not maintaining the sequence properly.

Answer 1

-- Login to psql and run the following
-- What is the result?
SELECT MAX(id) FROM your_table;
-- Then run...
-- This should be higher than the last result.
SELECT nextval('your_table_id_seq');
-- If it's not higher... run this set the sequence last to your highest id.
-- (wise to run a quick pg_dump first...)
BEGIN;
-- protect against concurrent inserts while you update the counter
LOCK TABLE your_table IN EXCLUSIVE MODE;
-- Update the sequence
SELECT setval('your_table_id_seq', COALESCE((SELECT MAX(id)+1 FROM your_table), 1), false);
COMMIT;
Source - Ruby Forum

Answer 2

pg_get_serial_sequence can be used to avoid any incorrect assumptions about the sequence name. This resets the sequence in one shot:
SELECT pg_catalog.setval(pg_get_serial_sequence('table_name', 'id'), (SELECT MAX(id) FROM table_name)+1);
Or more concisely:
SELECT pg_catalog.setval(pg_get_serial_sequence('table_name', 'id'), MAX(id)) FROM table_name;
However this form can't handle empty tables correctly, since max(id) is null, and neither can you setval 0 because it would be out of range of the sequence. One workaround for this is to resort to the ALTER SEQUENCE syntax i.e.
ALTER SEQUENCE table_name_id_seq RESTART WITH 1;
ALTER SEQUENCE table_name_id_seq RESTART; -- 8.4 or higher
But ALTER SEQUENCE is of limited use because the sequence name and restart value cannot be expressions.
It seems the best all-purpose solution is to call setval with false as the 3rd parameter, allowing us to specify the "next value to use":
SELECT setval(pg_get_serial_sequence('t1', 'id'), coalesce(max(id),0) + 1, false) FROM t1;
This ticks all my boxes:
avoids hard-coding the actual sequence name
handles empty tables correctly
handles tables with existing data, and does not leave a
hole in the sequence
Finally, note that pg_get_serial_sequence only works if the sequence is owned by the column. This will be the case if the incrementing column was defined as a serial type, however if the sequence was added manually it is necessary to ensure ALTER SEQUENCE .. OWNED BY is also performed.
i.e. if serial type was used for table creation, this should all work:
CREATE TABLE t1 (
id serial,
name varchar(20)
);
SELECT pg_get_serial_sequence('t1', 'id'); -- returns 't1_id_seq'
-- reset the sequence, regardless whether table has rows or not:
SELECT setval(pg_get_serial_sequence('t1', 'id'), coalesce(max(id),0) + 1, false) FROM t1;
But if sequences were added manually:
CREATE TABLE t2 (
id integer NOT NULL,
name varchar(20)
);
CREATE SEQUENCE t2_custom_id_seq
START WITH 1
INCREMENT BY 1
NO MINVALUE
NO MAXVALUE
CACHE 1;
ALTER TABLE t2 ALTER COLUMN id SET DEFAULT nextval('t2_custom_id_seq'::regclass);
ALTER SEQUENCE t2_custom_id_seq OWNED BY t2.id; -- required for pg_get_serial_sequence
SELECT pg_get_serial_sequence('t2', 'id'); -- returns 't2_custom_id_seq'
-- reset the sequence, regardless whether table has rows or not:
SELECT setval(pg_get_serial_sequence('t2', 'id'), coalesce(max(id),0) + 1, false) FROM t1;

Answer 3

The shortest and fastest way
SELECT setval('tbl_tbl_id_seq', max(tbl_id)) FROM tbl;
tbl_id being the serial or IDENTITY column of table tbl, drawing from the sequence tbl_tbl_id_seq (resulting default name). See:
Auto increment table column
If you don't know the name of the attached sequence (which doesn't have to be in default form), use pg_get_serial_sequence() (works for IDENTITY, too):
SELECT setval(pg_get_serial_sequence('tbl', 'tbl_id'), max(tbl_id)) FROM tbl;
There is no off-by-one error here. The manual:
The two-parameter form sets the sequence's last_value field to the
specified value and sets its is_called field to true, meaning that the
next nextval will advance the sequence before returning a value.
Bold emphasis mine.
If the table can be empty, and to actually start from 1 in this case:
SELECT setval(pg_get_serial_sequence('tbl', 'tbl_id')
, COALESCE(max(tbl_id) + 1, 1)
, false)
FROM tbl;
We can't just use the 2-parameter form and start with 0 because the lower bound of sequences is 1 by default (unless customized).
Safe under concurrent write load
To also defend against concurrent sequence activity or writes, lock the table in SHARE mode. It keeps concurrent transactions from writing a higher number (or anything at all).
To also take clients into account that may have fetched sequence numbers in advance without any locks on the main table, yet (can happen in certain setups), only increase the current value of the sequence, never decrease it. That may seem paranoid, but that's in accord with the nature of sequences and defending against concurrency issues.
BEGIN;
LOCK TABLE tbl IN SHARE MODE;
SELECT setval('tbl_tbl_id_seq', max(tbl_id))
FROM tbl
HAVING max(tbl_id) > (SELECT last_value FROM tbl_tbl_id_seq); -- prevent lower number
COMMIT;
SHARE mode is strong enough for the purpose. The manual:
This mode protects a table against concurrent data changes.
It conflicts with ROW EXCLUSIVE mode.
The commands UPDATE, DELETE, and INSERT acquire this lock mode on the target table.

Answer 4

This will reset all sequences from public making no assumptions about table or column names. Tested on version 8.4
CREATE OR REPLACE FUNCTION "reset_sequence" (tablename text, columnname text, sequence_name text)
RETURNS "pg_catalog"."void" AS
$body$
DECLARE
BEGIN
EXECUTE 'SELECT setval( ''' || sequence_name || ''', ' || '(SELECT MAX(' || columnname ||
') FROM ' || tablename || ')' || '+1)';
END;
$body$ LANGUAGE 'plpgsql';
SELECT table_name || '_' || column_name || '_seq',
reset_sequence(table_name, column_name, table_name || '_' || column_name || '_seq')
FROM information_schema.columns where column_default like 'nextval%';

Answer 5

ALTER SEQUENCE sequence_name RESTART WITH (SELECT max(id) FROM table_name);
Doesn't work.
Copied from #tardate answer:
SELECT setval(pg_get_serial_sequence('table_name', 'id'), MAX(id)) FROM table_name;

Answer 6

In the example below, the table name is users and the schema name is public (default schema), replace it according to your needs.
1. Check the max id:
SELECT MAX(id) FROM public.users;
2. Check the next value:
SELECT nextval('public."users_id_seq"');
3. If the next value is lower than the max id, reset it:
SELECT setval('public."users_id_seq"',
(SELECT MAX(id) FROM public.users)
);
Note:
nextval() will increment the sequence before returning the current value while currval() would just return the current value, as documented here.

Answer 7

This command for only change auto generated key sequence value in postgresql
ALTER SEQUENCE "your_sequence_name" RESTART WITH 0;
In place of zero you can put any number from which you want to restart sequence.
default sequence name will "TableName_FieldName_seq". For example, if your table name is "MyTable" and your field name is "MyID", then your sequence name will be "MyTable_MyID_seq".
This is answer is same as #murugesanponappan's answer, but there is a syntax error in his solution. you can not use sub query (select max()...) in alter command. So that either you have to use fixed numeric value or you need to use a variable in place of sub query.

Answer 8

Reset all sequences, no assumptions about names except that the primary key of each table is "id":
CREATE OR REPLACE FUNCTION "reset_sequence" (tablename text, columnname text)
RETURNS "pg_catalog"."void" AS
$body$
DECLARE
BEGIN
EXECUTE 'SELECT setval( pg_get_serial_sequence(''' || tablename || ''', ''' || columnname || '''),
(SELECT COALESCE(MAX(id)+1,1) FROM ' || tablename || '), false)';
END;
$body$ LANGUAGE 'plpgsql';
select table_name || '_' || column_name || '_seq', reset_sequence(table_name, column_name) from information_schema.columns where column_default like 'nextval%';

Answer 9

These functions are fraught with perils when sequence names, column names, table names or schema names have funny characters such as spaces, punctuation marks, and the like. I have written this:
CREATE OR REPLACE FUNCTION sequence_max_value(oid) RETURNS bigint
VOLATILE STRICT LANGUAGE plpgsql AS $$
DECLARE
tabrelid oid;
colname name;
r record;
newmax bigint;
BEGIN
FOR tabrelid, colname IN SELECT attrelid, attname
FROM pg_attribute
WHERE (attrelid, attnum) IN (
SELECT adrelid::regclass,adnum
FROM pg_attrdef
WHERE oid IN (SELECT objid
FROM pg_depend
WHERE refobjid = $1
AND classid = 'pg_attrdef'::regclass
)
) LOOP
FOR r IN EXECUTE 'SELECT max(' || quote_ident(colname) || ') FROM ' || tabrelid::regclass LOOP
IF newmax IS NULL OR r.max > newmax THEN
newmax := r.max;
END IF;
END LOOP;
END LOOP;
RETURN newmax;
END; $$ ;
You can call it for a single sequence by passing it the OID and it will return the highest number used by any table that has the sequence as default; or you can run it with a query like this, to reset all the sequences in your database:
select relname, setval(oid, sequence_max_value(oid))
from pg_class
where relkind = 'S';
Using a different qual you can reset only the sequence in a certain schema, and so on. For example, if you want to adjust sequences in the "public" schema:
select relname, setval(pg_class.oid, sequence_max_value(pg_class.oid))
from pg_class, pg_namespace
where pg_class.relnamespace = pg_namespace.oid and
nspname = 'public' and
relkind = 'S';
Note that due to how setval() works, you don't need to add 1 to the result.
As a closing note, I have to warn that some databases seem to have defaults linking to sequences in ways that do not let the system catalogs have full information of them. This happens when you see things like this in psql's \d:
alvherre=# \d baz
Tabla «public.baz»
Columna | Tipo | Modificadores
---------+---------+------------------------------------------------
a | integer | default nextval(('foo_a_seq'::text)::regclass)
Note that the nextval() call in that default clause has a ::text cast in addition to the ::regclass cast. I think this is due to databases being pg_dump'ed from old PostgreSQL versions. What will happen is that the function sequence_max_value() above will ignore such a table. To fix the problem, you can redefine the DEFAULT clause to refer to the sequence directly without the cast:
alvherre=# alter table baz alter a set default nextval('foo_a_seq');
ALTER TABLE
Then psql displays it properly:
alvherre=# \d baz
Tabla «public.baz»
Columna | Tipo | Modificadores
---------+---------+----------------------------------------
a | integer | default nextval('foo_a_seq'::regclass)
As soon as you've fixed that, the function works correctly for this table as well as all others that might use the same sequence.

Answer 10

I suggest this solution found on postgres wiki. It updates all sequences of your tables.
SELECT 'SELECT SETVAL(' ||
quote_literal(quote_ident(PGT.schemaname) || '.' || quote_ident(S.relname)) ||
', COALESCE(MAX(' ||quote_ident(C.attname)|| '), 1) ) FROM ' ||
quote_ident(PGT.schemaname)|| '.'||quote_ident(T.relname)|| ';'
FROM pg_class AS S,
pg_depend AS D,
pg_class AS T,
pg_attribute AS C,
pg_tables AS PGT
WHERE S.relkind = 'S'
AND S.oid = D.objid
AND D.refobjid = T.oid
AND D.refobjid = C.attrelid
AND D.refobjsubid = C.attnum
AND T.relname = PGT.tablename
ORDER BY S.relname;
How to use(from postgres wiki):
Save this to a file, say 'reset.sql'
Run the file and save its output in a way that doesn't include the usual headers, then run that output. Example:
Example:
psql -Atq -f reset.sql -o temp
psql -f temp
rm temp
Original article(also with fix for sequence ownership) here

Answer 11

Yet another plpgsql - resets only if max(att) > then lastval
do --check seq not in sync
$$
declare
_r record;
_i bigint;
_m bigint;
begin
for _r in (
SELECT relname,nspname,d.refobjid::regclass, a.attname, refobjid
FROM pg_depend d
JOIN pg_attribute a ON a.attrelid = d.refobjid AND a.attnum = d.refobjsubid
JOIN pg_class r on r.oid = objid
JOIN pg_namespace n on n.oid = relnamespace
WHERE d.refobjsubid > 0 and relkind = 'S'
) loop
execute format('select last_value from %I.%I',_r.nspname,_r.relname) into _i;
execute format('select max(%I) from %s',_r.attname,_r.refobjid) into _m;
if coalesce(_m,0) > _i then
raise info '%',concat('changed: ',_r.nspname,'.',_r.relname,' from:',_i,' to:',_m);
execute format('alter sequence %I.%I restart with %s',_r.nspname,_r.relname,_m+1);
end if;
end loop;
end;
$$
;
also commenting the line --execute format('alter sequence will give the list, not actually resetting the value

Answer 12

Reset all sequence from public
CREATE OR REPLACE FUNCTION "reset_sequence" (tablename text) RETURNS "pg_catalog"."void" AS
$body$
DECLARE
BEGIN
EXECUTE 'SELECT setval( '''
|| tablename
|| '_id_seq'', '
|| '(SELECT id + 1 FROM "'
|| tablename
|| '" ORDER BY id DESC LIMIT 1), false)';
END;
$body$ LANGUAGE 'plpgsql';
select sequence_name, reset_sequence(split_part(sequence_name, '_id_seq',1)) from information_schema.sequences
where sequence_schema='public';

Answer 13

This issue happens with me when using entity framework to create the database and then seed the database with initial data, this makes the sequence mismatch.
I Solved it by Creating a script to run after seeding the database:
DO
$do$
DECLARE tablename text;
BEGIN
-- change the where statments to include or exclude whatever tables you need
FOR tablename IN SELECT table_name FROM information_schema.tables WHERE table_schema='public' AND table_type='BASE TABLE' AND table_name != '__EFMigrationsHistory'
LOOP
EXECUTE format('SELECT setval(pg_get_serial_sequence(''"%s"'', ''Id''), (SELECT MAX("Id") + 1 from "%s"))', tablename, tablename);
END LOOP;
END
$do$

Answer 14

Some really hardcore answers here, I'm assuming it used to be really bad at around the time when this has been asked, since a lot of answers from here don't works for version 9.3. The documentation since version 8.0 provides an answer to this very question:
SELECT setval('serial', max(id)) FROM distributors;
Also, if you need to take care of case-sensitive sequence names, that's how you do it:
SELECT setval('"Serial"', max(id)) FROM distributors;

Answer 15

My version use the first one, with some error checking...
BEGIN;
CREATE OR REPLACE FUNCTION reset_sequence(_table_schema text, _tablename text, _columnname text, _sequence_name text)
RETURNS pg_catalog.void AS
$BODY$
DECLARE
BEGIN
PERFORM 1
FROM information_schema.sequences
WHERE
sequence_schema = _table_schema AND
sequence_name = _sequence_name;
IF FOUND THEN
EXECUTE 'SELECT setval( ''' || _table_schema || '.' || _sequence_name || ''', ' || '(SELECT MAX(' || _columnname || ') FROM ' || _table_schema || '.' || _tablename || ')' || '+1)';
ELSE
RAISE WARNING 'SEQUENCE NOT UPDATED ON %.%', _tablename, _columnname;
END IF;
END;
$BODY$
LANGUAGE 'plpgsql';
SELECT reset_sequence(table_schema, table_name, column_name, table_name || '_' || column_name || '_seq')
FROM information_schema.columns
WHERE column_default LIKE 'nextval%';
DROP FUNCTION reset_sequence(_table_schema text, _tablename text, _columnname text, _sequence_name text) ;
COMMIT;

Answer 16

Putting it all together
CREATE OR REPLACE FUNCTION "reset_sequence" (tablename text)
RETURNS "pg_catalog"."void" AS
$body$
DECLARE
BEGIN
EXECUTE 'SELECT setval( pg_get_serial_sequence(''' || tablename || ''', ''id''),
(SELECT COALESCE(MAX(id)+1,1) FROM ' || tablename || '), false)';
END;
$body$ LANGUAGE 'plpgsql';
will fix 'id' sequence of the given table (as usually necessary with django for instance).

Answer 17

Recheck all sequence in public schema function
CREATE OR REPLACE FUNCTION public.recheck_sequence (
)
RETURNS void AS
$body$
DECLARE
_table_name VARCHAR;
_column_name VARCHAR;
_sequence_name VARCHAR;
BEGIN
FOR _table_name IN SELECT tablename FROM pg_catalog.pg_tables WHERE schemaname = 'public' LOOP
FOR _column_name IN SELECT column_name FROM information_schema.columns WHERE table_name = _table_name LOOP
SELECT pg_get_serial_sequence(_table_name, _column_name) INTO _sequence_name;
IF _sequence_name IS NOT NULL THEN
EXECUTE 'SELECT setval('''||_sequence_name||''', COALESCE((SELECT MAX('||quote_ident(_column_name)||')+1 FROM '||quote_ident(_table_name)||'), 1), FALSE);';
END IF;
END LOOP;
END LOOP;
END;
$body$
LANGUAGE 'plpgsql'
VOLATILE
CALLED ON NULL INPUT
SECURITY INVOKER
COST 100;

Answer 18

before I had not tried yet the code : in the following I post
the version for the sql-code for both Klaus and user457226 solutions
which worked on my pc [Postgres 8.3], with just some little adjustements
for the Klaus one and of my version for the user457226 one.
Klaus solution :
drop function IF EXISTS rebuilt_sequences() RESTRICT;
CREATE OR REPLACE FUNCTION rebuilt_sequences() RETURNS integer as
$body$
DECLARE sequencedefs RECORD; c integer ;
BEGIN
FOR sequencedefs IN Select
constraint_column_usage.table_name as tablename,
constraint_column_usage.table_name as tablename,
constraint_column_usage.column_name as columnname,
replace(replace(columns.column_default,'''::regclass)',''),'nextval(''','') as sequencename
from information_schema.constraint_column_usage, information_schema.columns
where constraint_column_usage.table_schema ='public' AND
columns.table_schema = 'public' AND columns.table_name=constraint_column_usage.table_name
AND constraint_column_usage.column_name = columns.column_name
AND columns.column_default is not null
LOOP
EXECUTE 'select max('||sequencedefs.columnname||') from ' || sequencedefs.tablename INTO c;
IF c is null THEN c = 0; END IF;
IF c is not null THEN c = c+ 1; END IF;
EXECUTE 'alter sequence ' || sequencedefs.sequencename ||' restart with ' || c;
END LOOP;
RETURN 1; END;
$body$ LANGUAGE plpgsql;
select rebuilt_sequences();
user457226 solution :
--drop function IF EXISTS reset_sequence (text,text) RESTRICT;
CREATE OR REPLACE FUNCTION "reset_sequence" (tablename text,columnname text) RETURNS bigint --"pg_catalog"."void"
AS
$body$
DECLARE seqname character varying;
c integer;
BEGIN
select tablename || '_' || columnname || '_seq' into seqname;
EXECUTE 'SELECT max("' || columnname || '") FROM "' || tablename || '"' into c;
if c is null then c = 0; end if;
c = c+1; --because of substitution of setval with "alter sequence"
--EXECUTE 'SELECT setval( "' || seqname || '", ' || cast(c as character varying) || ', false)'; DOES NOT WORK!!!
EXECUTE 'alter sequence ' || seqname ||' restart with ' || cast(c as character varying);
RETURN nextval(seqname)-1;
END;
$body$ LANGUAGE 'plpgsql';
select sequence_name, PG_CLASS.relname, PG_ATTRIBUTE.attname,
reset_sequence(PG_CLASS.relname,PG_ATTRIBUTE.attname)
from PG_CLASS
join PG_ATTRIBUTE on PG_ATTRIBUTE.attrelid = PG_CLASS.oid
join information_schema.sequences
on information_schema.sequences.sequence_name = PG_CLASS.relname || '_' || PG_ATTRIBUTE.attname || '_seq'
where sequence_schema='public';

Answer 19

This answer is a copy from mauro.
drop function IF EXISTS rebuilt_sequences() RESTRICT;
CREATE OR REPLACE FUNCTION rebuilt_sequences() RETURNS integer as
$body$
DECLARE sequencedefs RECORD; c integer ;
BEGIN
FOR sequencedefs IN Select
DISTINCT(constraint_column_usage.table_name) as tablename,
constraint_column_usage.column_name as columnname,
replace(replace(columns.column_default,'''::regclass)',''),'nextval(''','') as sequencename
from information_schema.constraint_column_usage, information_schema.columns
where constraint_column_usage.table_schema ='public' AND
columns.table_schema = 'public' AND columns.table_name=constraint_column_usage.table_name
AND constraint_column_usage.column_name = columns.column_name
AND columns.column_default is not null
ORDER BY sequencename
LOOP
EXECUTE 'select max('||sequencedefs.columnname||') from ' || sequencedefs.tablename INTO c;
IF c is null THEN c = 0; END IF;
IF c is not null THEN c = c+ 1; END IF;
EXECUTE 'alter sequence ' || sequencedefs.sequencename ||' minvalue '||c ||' start ' || c ||' restart with ' || c;
END LOOP;
RETURN 1; END;
$body$ LANGUAGE plpgsql;
select rebuilt_sequences();

Answer 20

If you see this error when you are loading custom SQL data for initialization, another way to avoid this is:
Instead of writing:
INSERT INTO book (id, name, price) VALUES (1 , 'Alchemist' , 10),
Remove the id (primary key) from initial data
INSERT INTO book (name, price) VALUES ('Alchemist' , 10),
This keeps the Postgres sequence in sync !

Answer 21

To restart all sequence to 1 use:
-- Create Function
CREATE OR REPLACE FUNCTION "sy_restart_seq_to_1" (
relname TEXT
)
RETURNS "pg_catalog"."void" AS
$BODY$
DECLARE
BEGIN
EXECUTE 'ALTER SEQUENCE '||relname||' RESTART WITH 1;';
END;
$BODY$
LANGUAGE 'plpgsql';
-- Use Function
SELECT
relname
,sy_restart_seq_to_1(relname)
FROM pg_class
WHERE relkind = 'S';

Answer 22

The Klaus answer is the most useful, execpt for a little miss : you
have to add DISTINCT in select statement.
However, if you are sure that no table+column names can be equivalent
for two different tables, you can also use :
select sequence_name, --PG_CLASS.relname, PG_ATTRIBUTE.attname
reset_sequence(split_part(sequence_name, '_id_seq',1))
from PG_CLASS
join PG_ATTRIBUTE on PG_ATTRIBUTE.attrelid = PG_CLASS.oid
join information_schema.sequences
on information_schema.sequences.sequence_name = PG_CLASS.relname || '_' || PG_ATTRIBUTE.attname
where sequence_schema='public';
which is an extension of user457226 solution for the case when
some interested column name is not 'ID'.

Answer 23

I spent an hour trying to get djsnowsill's answer to work with a database using Mixed Case tables and columns, then finally stumbled upon the solution thanks to a comment from Manuel Darveau, but I thought I could make it a bit clearer for everyone:
CREATE OR REPLACE FUNCTION "reset_sequence" (tablename text, columnname text)
RETURNS "pg_catalog"."void" AS
$body$
DECLARE
BEGIN
EXECUTE format('SELECT setval(pg_get_serial_sequence(''%1$I'', %2$L),
(SELECT COALESCE(MAX(%2$I)+1,1) FROM %1$I), false)',tablename,columnname);
END;
$body$ LANGUAGE 'plpgsql';
SELECT format('%s_%s_seq',table_name,column_name), reset_sequence(table_name,column_name)
FROM information_schema.columns WHERE column_default like 'nextval%';
This has the benefit of:
not assuming ID column is spelled a particular way.
not assuming all tables have a sequence.
working for Mixed Case table/column names.
using format to be more concise.
To explain, the problem was that pg_get_serial_sequence takes strings to work out what you're referring to, so if you do:
"TableName" --it thinks it's a table or column
'TableName' --it thinks it's a string, but makes it lower case
'"TableName"' --it works!
This is achieved using ''%1$I'' in the format string, '' makes an apostrophe 1$ means first arg, and I means in quotes

Answer 24

select 'SELECT SETVAL(' || seq [ 1] || ', COALESCE(MAX('||column_name||')+1, 1) ) FROM '||table_name||';'
from (
SELECT table_name, column_name, column_default, regexp_match(column_default, '''.*''') as seq
from information_schema.columns
where column_default ilike 'nextval%'
) as sequense_query

Answer 25

Just run below command:
SELECT setval('my_table_seq', (SELECT max(id) FROM my_table));

Answer 26

Ugly hack to fix it using some shell magic, not a great solution but might inspire others with similar problems :)
pg_dump -s <DATABASE> | grep 'CREATE TABLE' | awk '{print "SELECT setval(#" $3 "_id_seq#, (SELECT MAX(id) FROM " $3 "));"}' | sed "s/#/'/g" | psql <DATABASE> -f -

Answer 27

A method to update all sequences in your schema that are used as an ID:
DO $$ DECLARE
r RECORD;
BEGIN
FOR r IN (SELECT tablename, pg_get_serial_sequence(tablename, 'id') as sequencename
FROM pg_catalog.pg_tables
WHERE schemaname='YOUR_SCHEMA'
AND tablename IN (SELECT table_name
FROM information_schema.columns
WHERE table_name=tablename and column_name='id')
order by tablename)
LOOP
EXECUTE
'SELECT setval(''' || r.sequencename || ''', COALESCE(MAX(id), 1), MAX(id) IS NOT null)
FROM ' || r.tablename || ';';
END LOOP;
END $$;

Answer 28

So I can tell there aren't enough opinions or reinvented wheels in this thread, so I decided to spice things up.
Below is a procedure that:
is focused (only affects) on sequences that are associated with tables
works for both SERIAL and GENERATED AS IDENTITY columns
works for good_column_names and "BAD_column_123" names
automatically assigns the respective sequences' defined start value if the table is empty
allows for a specific sequences to be affected only (in schema.table.column notation)
has a preview mode
CREATE OR REPLACE PROCEDURE pg_reset_all_table_sequences(
IN commit_mode BOOLEAN DEFAULT FALSE
, IN mask_in TEXT DEFAULT NULL
) AS
$$
DECLARE
sql_reset TEXT;
each_sec RECORD;
new_val TEXT;
BEGIN
sql_reset :=
$sql$
SELECT setval(pg_get_serial_sequence('%1$s.%2$s', '%3$s'), coalesce(max("%3$s"), %4$s), false) FROM %1$s.%2$s;
$sql$
;
FOR each_sec IN (
SELECT
quote_ident(table_schema) as table_schema
, quote_ident(table_name) as table_name
, column_name
, coalesce(identity_start::INT, seqstart) as min_val
FROM information_schema.columns
JOIN pg_sequence ON seqrelid = pg_get_serial_sequence(quote_ident(table_schema)||'.'||quote_ident(table_name) , column_name)::regclass
WHERE
(is_identity::boolean OR column_default LIKE 'nextval%') -- catches both SERIAL and IDENTITY sequences
-- mask on column address (schema.table.column) if supplied
AND coalesce( table_schema||'.'||table_name||'.'||column_name = mask_in, TRUE )
)
LOOP
IF commit_mode THEN
EXECUTE format(sql_reset, each_sec.table_schema, each_sec.table_name, each_sec.column_name, each_sec.min_val) INTO new_val;
RAISE INFO 'Resetting sequence for: %.% (%) to %'
, each_sec.table_schema
, each_sec.table_name
, each_sec.column_name
, new_val
;
ELSE
RAISE INFO 'Sequence found for resetting: %.% (%)'
, each_sec.table_schema
, each_sec.table_name
, each_sec.column_name
;
END IF
;
END LOOP;
END
$$
LANGUAGE plpgsql
;
to preview:
call pg_reset_all_table_sequences();
to commit:
call pg_reset_all_table_sequences(true);
to specify only your target table:
call pg_reset_all_table_sequences('schema.table.column');

Answer 29

Try reindex.
UPDATE: As pointed out in the comments, this was in reply to the original question.

Answer 30

There are a lot of good answers here. I had the same need after reloading my Django database.
But I needed:
All in one Function
Could fix one or more schemas at a time
Could fix all or just one table at a time
Also wanted a nice way to see exactly what had changed, or not changed
This seems very similar need to what the original ask was for.
Thanks to Baldiry and Mauro got me on the right track.
drop function IF EXISTS reset_sequences(text[], text) RESTRICT;
CREATE OR REPLACE FUNCTION reset_sequences(
in_schema_name_list text[] = '{"django", "dbaas", "metrics", "monitor", "runner", "db_counts"}',
in_table_name text = '%') RETURNS text[] as
$body$
DECLARE changed_seqs text[];
DECLARE sequence_defs RECORD; c integer ;
BEGIN
FOR sequence_defs IN
select
DISTINCT(ccu.table_name) as table_name,
ccu.column_name as column_name,
replace(replace(c.column_default,'''::regclass)',''),'nextval(''','') as sequence_name
from information_schema.constraint_column_usage ccu,
information_schema.columns c
where ccu.table_schema = ANY(in_schema_name_list)
and ccu.table_schema = c.table_schema
AND c.table_name = ccu.table_name
and c.table_name like in_table_name
AND ccu.column_name = c.column_name
AND c.column_default is not null
ORDER BY sequence_name
LOOP
EXECUTE 'select max(' || sequence_defs.column_name || ') from ' || sequence_defs.table_name INTO c;
IF c is null THEN c = 1; else c = c + 1; END IF;
EXECUTE 'alter sequence ' || sequence_defs.sequence_name || ' restart with ' || c;
changed_seqs = array_append(changed_seqs, 'alter sequence ' || sequence_defs.sequence_name || ' restart with ' || c);
END LOOP;
changed_seqs = array_append(changed_seqs, 'Done');
RETURN changed_seqs;
END
$body$ LANGUAGE plpgsql;
Then to Execute and See the changes run:
select *
from unnest(reset_sequences('{"django", "dbaas", "metrics", "monitor", "runner", "db_counts"}'));
Returns
activity_id_seq restart at 22
api_connection_info_id_seq restart at 4
api_user_id_seq restart at 1
application_contact_id_seq restart at 20