Related
We have an Instead-Of-Insert trigger on a view which copies all values from the INSERTED virtual-table to another table.
One of the fields in the list is non-nullable for the target table, and has a default value specified.
What we are experiencing, is, some application code is sending an insert command, and not specifying the non-nullable field - which (if the insert were executed against the actual table) would normally result in SQL Server inserting the column's default value. But, the trigger is explicit for all fields, so the trigger tries to insert null for that field... resulting in an error.
What I DONT want, is code like this...
INSERT INTO XXXX (col1, col2, col3)
SELECT
ISNULL(col1, 0), ISNULL(COL2, 0), ISNULL(COL3, 0)
FROM INSERTED
I don't want the trigger to need to know what the actual default values of each column should be (from a maintainability perspective)...
Does anyone have a better solution?
Thanks
when your application is sending NULL values to a not nullable column, there are not to many options. specialy when you dont want to use input validation with isnull.
we are using default values in this case. if it is possible you can alter your table:
ALTER TABLE xxxx ADD CONSTRAINT DF_col1 DEFAULT N'default' FOR col1;
I can think of an ugly and inefficient way of doing this. The idea is to insert a default row and then update the columns one at a time, using try/catch to ignore errors.
declare #Id int;
insert int XXX DEFAULT VALUES;
set #id = ##IDENTITY;
begin try
update XXX set col1 = val1 where id = #id;
end try
begin catch
end catch;
begin try
update XXX set col2 = val2 where id = #id;
end try
begin catch
end catch;
. . .
If you have to do this on 100 columns, then that could be a bad idea. If you only have two or three columns causing the problems, then this might solve your problem.
Assume a table structure of MyTable(KEY, datafield1, datafield2...).
Often I want to either update an existing record, or insert a new record if it doesn't exist.
Essentially:
IF (key exists)
run update command
ELSE
run insert command
What's the best performing way to write this?
don't forget about transactions. Performance is good, but simple (IF EXISTS..) approach is very dangerous.
When multiple threads will try to perform Insert-or-update you can easily
get primary key violation.
Solutions provided by #Beau Crawford & #Esteban show general idea but error-prone.
To avoid deadlocks and PK violations you can use something like this:
begin tran
if exists (select * from table with (updlock,serializable) where key = #key)
begin
update table set ...
where key = #key
end
else
begin
insert into table (key, ...)
values (#key, ...)
end
commit tran
or
begin tran
update table with (serializable) set ...
where key = #key
if ##rowcount = 0
begin
insert into table (key, ...) values (#key,..)
end
commit tran
See my detailed answer to a very similar previous question
#Beau Crawford's is a good way in SQL 2005 and below, though if you're granting rep it should go to the first guy to SO it. The only problem is that for inserts it's still two IO operations.
MS Sql2008 introduces merge from the SQL:2003 standard:
merge tablename with(HOLDLOCK) as target
using (values ('new value', 'different value'))
as source (field1, field2)
on target.idfield = 7
when matched then
update
set field1 = source.field1,
field2 = source.field2,
...
when not matched then
insert ( idfield, field1, field2, ... )
values ( 7, source.field1, source.field2, ... )
Now it's really just one IO operation, but awful code :-(
Do an UPSERT:
UPDATE MyTable SET FieldA=#FieldA WHERE Key=#Key
IF ##ROWCOUNT = 0
INSERT INTO MyTable (FieldA) VALUES (#FieldA)
http://en.wikipedia.org/wiki/Upsert
Many people will suggest you use MERGE, but I caution you against it. By default, it doesn't protect you from concurrency and race conditions any more than multiple statements, and it introduces other dangers:
Use Caution with SQL Server's MERGE Statement
So, you want to use MERGE, eh?
Even with this "simpler" syntax available, I still prefer this approach (error handling omitted for brevity):
BEGIN TRANSACTION;
UPDATE dbo.table WITH (UPDLOCK, SERIALIZABLE)
SET ... WHERE PK = #PK;
IF ##ROWCOUNT = 0
BEGIN
INSERT dbo.table(PK, ...) SELECT #PK, ...;
END
COMMIT TRANSACTION;
Please stop using this UPSERT anti-pattern
A lot of folks will suggest this way:
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
IF EXISTS (SELECT 1 FROM dbo.table WHERE PK = #PK)
BEGIN
UPDATE ...
END
ELSE
BEGIN
INSERT ...
END
COMMIT TRANSACTION;
But all this accomplishes is ensuring you may need to read the table twice to locate the row(s) to be updated. In the first sample, you will only ever need to locate the row(s) once. (In both cases, if no rows are found from the initial read, an insert occurs.)
Others will suggest this way:
BEGIN TRY
INSERT ...
END TRY
BEGIN CATCH
IF ERROR_NUMBER() = 2627
UPDATE ...
END CATCH
However, this is problematic if for no other reason than letting SQL Server catch exceptions that you could have prevented in the first place is much more expensive, except in the rare scenario where almost every insert fails. I prove as much here:
Checking for potential constraint violations before entering TRY/CATCH
Performance impact of different error handling techniques
IF EXISTS (SELECT * FROM [Table] WHERE ID = rowID)
UPDATE [Table] SET propertyOne = propOne, property2 . . .
ELSE
INSERT INTO [Table] (propOne, propTwo . . .)
Edit:
Alas, even to my own detriment, I must admit the solutions that do this without a select seem to be better since they accomplish the task with one less step.
If you want to UPSERT more than one record at a time you can use the ANSI SQL:2003 DML statement MERGE.
MERGE INTO table_name WITH (HOLDLOCK) USING table_name ON (condition)
WHEN MATCHED THEN UPDATE SET column1 = value1 [, column2 = value2 ...]
WHEN NOT MATCHED THEN INSERT (column1 [, column2 ...]) VALUES (value1 [, value2 ...])
Check out Mimicking MERGE Statement in SQL Server 2005.
Although its pretty late to comment on this I want to add a more complete example using MERGE.
Such Insert+Update statements are usually called "Upsert" statements and can be implemented using MERGE in SQL Server.
A very good example is given here:
http://weblogs.sqlteam.com/dang/archive/2009/01/31/UPSERT-Race-Condition-With-MERGE.aspx
The above explains locking and concurrency scenarios as well.
I will be quoting the same for reference:
ALTER PROCEDURE dbo.Merge_Foo2
#ID int
AS
SET NOCOUNT, XACT_ABORT ON;
MERGE dbo.Foo2 WITH (HOLDLOCK) AS f
USING (SELECT #ID AS ID) AS new_foo
ON f.ID = new_foo.ID
WHEN MATCHED THEN
UPDATE
SET f.UpdateSpid = ##SPID,
UpdateTime = SYSDATETIME()
WHEN NOT MATCHED THEN
INSERT
(
ID,
InsertSpid,
InsertTime
)
VALUES
(
new_foo.ID,
##SPID,
SYSDATETIME()
);
RETURN ##ERROR;
/*
CREATE TABLE ApplicationsDesSocietes (
id INT IDENTITY(0,1) NOT NULL,
applicationId INT NOT NULL,
societeId INT NOT NULL,
suppression BIT NULL,
CONSTRAINT PK_APPLICATIONSDESSOCIETES PRIMARY KEY (id)
)
GO
--*/
DECLARE #applicationId INT = 81, #societeId INT = 43, #suppression BIT = 0
MERGE dbo.ApplicationsDesSocietes WITH (HOLDLOCK) AS target
--set the SOURCE table one row
USING (VALUES (#applicationId, #societeId, #suppression))
AS source (applicationId, societeId, suppression)
--here goes the ON join condition
ON target.applicationId = source.applicationId and target.societeId = source.societeId
WHEN MATCHED THEN
UPDATE
--place your list of SET here
SET target.suppression = source.suppression
WHEN NOT MATCHED THEN
--insert a new line with the SOURCE table one row
INSERT (applicationId, societeId, suppression)
VALUES (source.applicationId, source.societeId, source.suppression);
GO
Replace table and field names by whatever you need.
Take care of the using ON condition.
Then set the appropriate value (and type) for the variables on the DECLARE line.
Cheers.
That depends on the usage pattern. One has to look at the usage big picture without getting lost in the details. For example, if the usage pattern is 99% updates after the record has been created, then the 'UPSERT' is the best solution.
After the first insert (hit), it will be all single statement updates, no ifs or buts. The 'where' condition on the insert is necessary otherwise it will insert duplicates, and you don't want to deal with locking.
UPDATE <tableName> SET <field>=#field WHERE key=#key;
IF ##ROWCOUNT = 0
BEGIN
INSERT INTO <tableName> (field)
SELECT #field
WHERE NOT EXISTS (select * from tableName where key = #key);
END
You can use MERGE Statement, This statement is used to insert data if not exist or update if does exist.
MERGE INTO Employee AS e
using EmployeeUpdate AS eu
ON e.EmployeeID = eu.EmployeeID`
If going the UPDATE if-no-rows-updated then INSERT route, consider doing the INSERT first to prevent a race condition (assuming no intervening DELETE)
INSERT INTO MyTable (Key, FieldA)
SELECT #Key, #FieldA
WHERE NOT EXISTS
(
SELECT *
FROM MyTable
WHERE Key = #Key
)
IF ##ROWCOUNT = 0
BEGIN
UPDATE MyTable
SET FieldA=#FieldA
WHERE Key=#Key
IF ##ROWCOUNT = 0
... record was deleted, consider looping to re-run the INSERT, or RAISERROR ...
END
Apart from avoiding a race condition, if in most cases the record will already exist then this will cause the INSERT to fail, wasting CPU.
Using MERGE probably preferable for SQL2008 onwards.
MS SQL Server 2008 introduces the MERGE statement, which I believe is part of the SQL:2003 standard. As many have shown it is not a big deal to handle one row cases, but when dealing with large datasets, one needs a cursor, with all the performance problems that come along. The MERGE statement will be much welcomed addition when dealing with large datasets.
Before everyone jumps to HOLDLOCK-s out of fear from these nafarious users running your sprocs directly :-) let me point out that you have to guarantee uniqueness of new PK-s by design (identity keys, sequence generators in Oracle, unique indexes for external ID-s, queries covered by indexes). That's the alpha and omega of the issue. If you don't have that, no HOLDLOCK-s of the universe are going to save you and if you do have that then you don't need anything beyond UPDLOCK on the first select (or to use update first).
Sprocs normally run under very controlled conditions and with the assumption of a trusted caller (mid tier). Meaning that if a simple upsert pattern (update+insert or merge) ever sees duplicate PK that means a bug in your mid-tier or table design and it's good that SQL will yell a fault in such case and reject the record. Placing a HOLDLOCK in this case equals eating exceptions and taking in potentially faulty data, besides reducing your perf.
Having said that, Using MERGE, or UPDATE then INSERT is easier on your server and less error prone since you don't have to remember to add (UPDLOCK) to first select. Also, if you are doing inserts/updates in small batches you need to know your data in order to decide whether a transaction is appropriate or not. It it's just a collection of unrelated records then additional "enveloping" transaction will be detrimental.
Does the race conditions really matter if you first try an update followed by an insert?
Lets say you have two threads that want to set a value for key key:
Thread 1: value = 1
Thread 2: value = 2
Example race condition scenario
key is not defined
Thread 1 fails with update
Thread 2 fails with update
Exactly one of thread 1 or thread 2 succeeds with insert. E.g. thread 1
The other thread fails with insert (with error duplicate key) - thread 2.
Result: The "first" of the two treads to insert, decides value.
Wanted result: The last of the 2 threads to write data (update or insert) should decide value
But; in a multithreaded environment, the OS scheduler decides on the order of the thread execution - in the above scenario, where we have this race condition, it was the OS that decided on the sequence of execution. Ie: It is wrong to say that "thread 1" or "thread 2" was "first" from a system viewpoint.
When the time of execution is so close for thread 1 and thread 2, the outcome of the race condition doesn't matter. The only requirement should be that one of the threads should define the resulting value.
For the implementation: If update followed by insert results in error "duplicate key", this should be treated as success.
Also, one should of course never assume that value in the database is the same as the value you wrote last.
I had tried below solution and it works for me, when concurrent request for insert statement occurs.
begin tran
if exists (select * from table with (updlock,serializable) where key = #key)
begin
update table set ...
where key = #key
end
else
begin
insert table (key, ...)
values (#key, ...)
end
commit tran
You can use this query. Work in all SQL Server editions. It's simple, and clear. But you need use 2 queries. You can use if you can't use MERGE
BEGIN TRAN
UPDATE table
SET Id = #ID, Description = #Description
WHERE Id = #Id
INSERT INTO table(Id, Description)
SELECT #Id, #Description
WHERE NOT EXISTS (SELECT NULL FROM table WHERE Id = #Id)
COMMIT TRAN
NOTE: Please explain answer negatives
Assuming that you want to insert/update single row, most optimal approach is to use SQL Server's REPEATABLE READ transaction isolation level:
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN TRANSACTION
IF (EXISTS (SELECT * FROM myTable WHERE key=#key)
UPDATE myTable SET ...
WHERE key=#key
ELSE
INSERT INTO myTable (key, ...)
VALUES (#key, ...)
COMMIT TRANSACTION
This isolation level will prevent/block subsequent repeatable read transactions from accessing same row (WHERE key=#key) while currently running transaction is open.
On the other hand, operations on another row won't be blocked (WHERE key=#key2).
You can use:
INSERT INTO tableName (...) VALUES (...)
ON DUPLICATE KEY
UPDATE ...
Using this, if there is already an entry for the particular key, then it will UPDATE, else, it will INSERT.
In SQL Server 2008 you can use the MERGE statement
If you use ADO.NET, the DataAdapter handles this.
If you want to handle it yourself, this is the way:
Make sure there is a primary key constraint on your key column.
Then you:
Do the update
If the update fails because a record with the key already exists, do the insert. If the update does not fail, you are finished.
You can also do it the other way round, i.e. do the insert first, and do the update if the insert fails. Normally the first way is better, because updates are done more often than inserts.
Doing an if exists ... else ... involves doing two requests minimum (one to check, one to take action). The following approach requires only one where the record exists, two if an insert is required:
DECLARE #RowExists bit
SET #RowExists = 0
UPDATE MyTable SET DataField1 = 'xxx', #RowExists = 1 WHERE Key = 123
IF #RowExists = 0
INSERT INTO MyTable (Key, DataField1) VALUES (123, 'xxx')
I usually do what several of the other posters have said with regard to checking for it existing first and then doing whatever the correct path is. One thing you should remember when doing this is that the execution plan cached by sql could be nonoptimal for one path or the other. I believe the best way to do this is to call two different stored procedures.
FirstSP:
If Exists
Call SecondSP (UpdateProc)
Else
Call ThirdSP (InsertProc)
Now, I don't follow my own advice very often, so take it with a grain of salt.
Do a select, if you get a result, update it, if not, create it.
Question:
In our SQL-Server 2005 database, we have a table T_Groups.
T_Groups has, amongst other things, the fields ID (PK) and Name.
Now some idiot in our company used the name as key in a mapping table...
Which means now one may not alter a group name, because if one does, the mapping is gone...
Now, until this is resolved, I need to add a restriction to T_Groups, so one can't update the group's name.
Note that insert should still be possible, and an update that doesn't change the groupname should also be possible.
Also note that the user of the application & the developers have both dbo and sysadmin rights, so REVOKE/DENY won't work.
How can I do this with a trigger ?
CREATE TRIGGER dbo.yournametrigger ON T_Groups
FOR UPDATE
AS
BEGIN
IF UPDATE(name)
BEGIN
ROLLBACK
RAISERROR('Changes column name not allowed', 16, 1);
END
ELSE
BEGIN
--possible update that doesn't change the groupname
END
END
CREATE TRIGGER tg_name_me
ON tbl_name
INSTEAD OF UPDATE
AS
IF EXISTS (
SELECT *
FROM INSERTED I
JOIN DELETED D ON D.PK = I.PK AND ISNULL(D.name,I.name+'.') <> ISNULL(I.name,D.name+'.')
)
RAISERROR('Changes to the name in table tbl_name are NOT allowed', 16,1);
GO
Depending on your application framework for accessing the database, a cheaper way to check for changes is Alexander's answer. Some frameworks will generate SQL update statements that include all columns even if they have not changed, such as
UPDATE TBL
SET name = 'abc', -- unchanged
col2 = null, -- changed
... etc all columns
The UPDATE() function merely checks whether the column is present in the statement, not whether its value has changed. This particular statement will raise an error using UPDATE() but won't if tested using the more elaborate trigger as shown above.
This is an example of preserving some original values with an update trigger.
It works by setting the values for orig_author and orig_date to the values from the deleted pseudotable each time. It still performs the work and uses cycles.
CREATE TRIGGER [dbo].[tru_my_table] ON [dbo].[be_my_table]
AFTER UPDATE
AS
UPDATE [dbo].[be_my_table]
SET
orig_author = deleted.orig_author
orig_date = deleted.orig_date,
last_mod_by = SUSER_SNAME(),
last_mod_dt = getdate()
from deleted
WHERE deleted.my_table_id IN (SELECT DISTINCT my_table_id FROM Inserted)
ALTER TABLE [dbo].[be_my_table] ENABLE TRIGGER [tru_my_table]
GO
This example will lock any updates on SABENTIS_LOCATION.fk_sabentis_location through a trigger, and will output a detailed message indicating what objects are affected
ALTER TRIGGER dbo.SABENTIS_LOCATION_update_fk_sabentis_location ON SABENTIS_LOCATION
FOR UPDATE
AS
DECLARE #affected nvarchar(max)
SELECT #affected=STRING_AGG(convert(nvarchar(50), a.id), ', ')
FROM inserted a
JOIN deleted b ON a.id = b.id
WHERE a.fk_sabentis_location != b.fk_sabentis_location
IF #affected != ''
BEGIN
ROLLBACK TRAN
DECLARE #message nvarchar(max) = CONCAT('Update values on column fk_sabentis_location locked by custom trigger. Could not update entities: ', #affected);
RAISERROR(#message, 16, 1)
END
Some examples seem to be using:
IF UPDATE(name)
But this seems to evaluate to TRUE if the field is part of the update statement, even if the value itself has NOT CHANGED leading to false positives.
I have a table with a AutoIdentity column as its PK and a nvarchar column called "IdentificationCode". All I want is when inserting a new row, it will search the table for any preexisting IdentificationCode, and if any found roll back the transaction.
I have written the folowing trigger:
ALTER trigger [dbo].[Disallow_Duplicate_Ids]
on [dbo].[tbl1]
for insert
as
if ((select COUNT(*) from dbo.tbl1 e , inserted i where e.IdentificationNo = i.IdentificationNo ) > 0)
begin
RAISERROR('Multiple Ids detected',16,1)
ROLLBACK TRANSACTION
end
But when inserting new rows, it always triggers the rollback even if there is no such IdentificationCode.
Can any one help me please?
thanks
As #Qpirate mentions, you should probably put some sort of UNIQUE constraint on the column. This is probably 'stronger' than using a trigger, as there's ways to disable those.
Also, the implicit-join syntax (comma-separated FROM clause) is considered an SQL anti-pattern - if possible, please always explicitly declare your joins.
I suspect that your error is because your trigger seems to be an AFTER trigger, and you check to see if there are any (non-zero) rows in the table; in other words, the trigger is (possibly) 'failing' the INSERT because it was INSERTed. Changing it to a BEFORE (or INSTEAD OF) trigger, or changing the count to >= 2 may solve the problem.
Without seeing your insert statement, it's impossible to know for sure, but (especially if you're using a SP), you may be able to check for existence in the INSERT statement itself, and throw an error (or do something else) if the row isn't inserted.
For example, the following:
INSERT INTO tbl1 (identificationCode, *otherColumns*)
VALUES (#identificationCode, *otherColumns)
WHERE NOT EXISTS (SELECT '1'
FROM tbl1
WHERE identificationCode = #identificationCode)
Will return a code indicating 'row not found' (inserted, etc; on pretty much every system this is SQLCODE = 100) if identificationCode is already present.
Use EXISTS to check if the IdentificationCode already exist.
If EXISTS (Select * from tbl1 where IdentificationCode = #IdentificationCode )
BEGIN
//do something
END
Else
BEGIN
//do something
END
Assume a table structure of MyTable(KEY, datafield1, datafield2...).
Often I want to either update an existing record, or insert a new record if it doesn't exist.
Essentially:
IF (key exists)
run update command
ELSE
run insert command
What's the best performing way to write this?
don't forget about transactions. Performance is good, but simple (IF EXISTS..) approach is very dangerous.
When multiple threads will try to perform Insert-or-update you can easily
get primary key violation.
Solutions provided by #Beau Crawford & #Esteban show general idea but error-prone.
To avoid deadlocks and PK violations you can use something like this:
begin tran
if exists (select * from table with (updlock,serializable) where key = #key)
begin
update table set ...
where key = #key
end
else
begin
insert into table (key, ...)
values (#key, ...)
end
commit tran
or
begin tran
update table with (serializable) set ...
where key = #key
if ##rowcount = 0
begin
insert into table (key, ...) values (#key,..)
end
commit tran
See my detailed answer to a very similar previous question
#Beau Crawford's is a good way in SQL 2005 and below, though if you're granting rep it should go to the first guy to SO it. The only problem is that for inserts it's still two IO operations.
MS Sql2008 introduces merge from the SQL:2003 standard:
merge tablename with(HOLDLOCK) as target
using (values ('new value', 'different value'))
as source (field1, field2)
on target.idfield = 7
when matched then
update
set field1 = source.field1,
field2 = source.field2,
...
when not matched then
insert ( idfield, field1, field2, ... )
values ( 7, source.field1, source.field2, ... )
Now it's really just one IO operation, but awful code :-(
Do an UPSERT:
UPDATE MyTable SET FieldA=#FieldA WHERE Key=#Key
IF ##ROWCOUNT = 0
INSERT INTO MyTable (FieldA) VALUES (#FieldA)
http://en.wikipedia.org/wiki/Upsert
Many people will suggest you use MERGE, but I caution you against it. By default, it doesn't protect you from concurrency and race conditions any more than multiple statements, and it introduces other dangers:
Use Caution with SQL Server's MERGE Statement
So, you want to use MERGE, eh?
Even with this "simpler" syntax available, I still prefer this approach (error handling omitted for brevity):
BEGIN TRANSACTION;
UPDATE dbo.table WITH (UPDLOCK, SERIALIZABLE)
SET ... WHERE PK = #PK;
IF ##ROWCOUNT = 0
BEGIN
INSERT dbo.table(PK, ...) SELECT #PK, ...;
END
COMMIT TRANSACTION;
Please stop using this UPSERT anti-pattern
A lot of folks will suggest this way:
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
IF EXISTS (SELECT 1 FROM dbo.table WHERE PK = #PK)
BEGIN
UPDATE ...
END
ELSE
BEGIN
INSERT ...
END
COMMIT TRANSACTION;
But all this accomplishes is ensuring you may need to read the table twice to locate the row(s) to be updated. In the first sample, you will only ever need to locate the row(s) once. (In both cases, if no rows are found from the initial read, an insert occurs.)
Others will suggest this way:
BEGIN TRY
INSERT ...
END TRY
BEGIN CATCH
IF ERROR_NUMBER() = 2627
UPDATE ...
END CATCH
However, this is problematic if for no other reason than letting SQL Server catch exceptions that you could have prevented in the first place is much more expensive, except in the rare scenario where almost every insert fails. I prove as much here:
Checking for potential constraint violations before entering TRY/CATCH
Performance impact of different error handling techniques
IF EXISTS (SELECT * FROM [Table] WHERE ID = rowID)
UPDATE [Table] SET propertyOne = propOne, property2 . . .
ELSE
INSERT INTO [Table] (propOne, propTwo . . .)
Edit:
Alas, even to my own detriment, I must admit the solutions that do this without a select seem to be better since they accomplish the task with one less step.
If you want to UPSERT more than one record at a time you can use the ANSI SQL:2003 DML statement MERGE.
MERGE INTO table_name WITH (HOLDLOCK) USING table_name ON (condition)
WHEN MATCHED THEN UPDATE SET column1 = value1 [, column2 = value2 ...]
WHEN NOT MATCHED THEN INSERT (column1 [, column2 ...]) VALUES (value1 [, value2 ...])
Check out Mimicking MERGE Statement in SQL Server 2005.
Although its pretty late to comment on this I want to add a more complete example using MERGE.
Such Insert+Update statements are usually called "Upsert" statements and can be implemented using MERGE in SQL Server.
A very good example is given here:
http://weblogs.sqlteam.com/dang/archive/2009/01/31/UPSERT-Race-Condition-With-MERGE.aspx
The above explains locking and concurrency scenarios as well.
I will be quoting the same for reference:
ALTER PROCEDURE dbo.Merge_Foo2
#ID int
AS
SET NOCOUNT, XACT_ABORT ON;
MERGE dbo.Foo2 WITH (HOLDLOCK) AS f
USING (SELECT #ID AS ID) AS new_foo
ON f.ID = new_foo.ID
WHEN MATCHED THEN
UPDATE
SET f.UpdateSpid = ##SPID,
UpdateTime = SYSDATETIME()
WHEN NOT MATCHED THEN
INSERT
(
ID,
InsertSpid,
InsertTime
)
VALUES
(
new_foo.ID,
##SPID,
SYSDATETIME()
);
RETURN ##ERROR;
/*
CREATE TABLE ApplicationsDesSocietes (
id INT IDENTITY(0,1) NOT NULL,
applicationId INT NOT NULL,
societeId INT NOT NULL,
suppression BIT NULL,
CONSTRAINT PK_APPLICATIONSDESSOCIETES PRIMARY KEY (id)
)
GO
--*/
DECLARE #applicationId INT = 81, #societeId INT = 43, #suppression BIT = 0
MERGE dbo.ApplicationsDesSocietes WITH (HOLDLOCK) AS target
--set the SOURCE table one row
USING (VALUES (#applicationId, #societeId, #suppression))
AS source (applicationId, societeId, suppression)
--here goes the ON join condition
ON target.applicationId = source.applicationId and target.societeId = source.societeId
WHEN MATCHED THEN
UPDATE
--place your list of SET here
SET target.suppression = source.suppression
WHEN NOT MATCHED THEN
--insert a new line with the SOURCE table one row
INSERT (applicationId, societeId, suppression)
VALUES (source.applicationId, source.societeId, source.suppression);
GO
Replace table and field names by whatever you need.
Take care of the using ON condition.
Then set the appropriate value (and type) for the variables on the DECLARE line.
Cheers.
That depends on the usage pattern. One has to look at the usage big picture without getting lost in the details. For example, if the usage pattern is 99% updates after the record has been created, then the 'UPSERT' is the best solution.
After the first insert (hit), it will be all single statement updates, no ifs or buts. The 'where' condition on the insert is necessary otherwise it will insert duplicates, and you don't want to deal with locking.
UPDATE <tableName> SET <field>=#field WHERE key=#key;
IF ##ROWCOUNT = 0
BEGIN
INSERT INTO <tableName> (field)
SELECT #field
WHERE NOT EXISTS (select * from tableName where key = #key);
END
You can use MERGE Statement, This statement is used to insert data if not exist or update if does exist.
MERGE INTO Employee AS e
using EmployeeUpdate AS eu
ON e.EmployeeID = eu.EmployeeID`
If going the UPDATE if-no-rows-updated then INSERT route, consider doing the INSERT first to prevent a race condition (assuming no intervening DELETE)
INSERT INTO MyTable (Key, FieldA)
SELECT #Key, #FieldA
WHERE NOT EXISTS
(
SELECT *
FROM MyTable
WHERE Key = #Key
)
IF ##ROWCOUNT = 0
BEGIN
UPDATE MyTable
SET FieldA=#FieldA
WHERE Key=#Key
IF ##ROWCOUNT = 0
... record was deleted, consider looping to re-run the INSERT, or RAISERROR ...
END
Apart from avoiding a race condition, if in most cases the record will already exist then this will cause the INSERT to fail, wasting CPU.
Using MERGE probably preferable for SQL2008 onwards.
MS SQL Server 2008 introduces the MERGE statement, which I believe is part of the SQL:2003 standard. As many have shown it is not a big deal to handle one row cases, but when dealing with large datasets, one needs a cursor, with all the performance problems that come along. The MERGE statement will be much welcomed addition when dealing with large datasets.
Before everyone jumps to HOLDLOCK-s out of fear from these nafarious users running your sprocs directly :-) let me point out that you have to guarantee uniqueness of new PK-s by design (identity keys, sequence generators in Oracle, unique indexes for external ID-s, queries covered by indexes). That's the alpha and omega of the issue. If you don't have that, no HOLDLOCK-s of the universe are going to save you and if you do have that then you don't need anything beyond UPDLOCK on the first select (or to use update first).
Sprocs normally run under very controlled conditions and with the assumption of a trusted caller (mid tier). Meaning that if a simple upsert pattern (update+insert or merge) ever sees duplicate PK that means a bug in your mid-tier or table design and it's good that SQL will yell a fault in such case and reject the record. Placing a HOLDLOCK in this case equals eating exceptions and taking in potentially faulty data, besides reducing your perf.
Having said that, Using MERGE, or UPDATE then INSERT is easier on your server and less error prone since you don't have to remember to add (UPDLOCK) to first select. Also, if you are doing inserts/updates in small batches you need to know your data in order to decide whether a transaction is appropriate or not. It it's just a collection of unrelated records then additional "enveloping" transaction will be detrimental.
Does the race conditions really matter if you first try an update followed by an insert?
Lets say you have two threads that want to set a value for key key:
Thread 1: value = 1
Thread 2: value = 2
Example race condition scenario
key is not defined
Thread 1 fails with update
Thread 2 fails with update
Exactly one of thread 1 or thread 2 succeeds with insert. E.g. thread 1
The other thread fails with insert (with error duplicate key) - thread 2.
Result: The "first" of the two treads to insert, decides value.
Wanted result: The last of the 2 threads to write data (update or insert) should decide value
But; in a multithreaded environment, the OS scheduler decides on the order of the thread execution - in the above scenario, where we have this race condition, it was the OS that decided on the sequence of execution. Ie: It is wrong to say that "thread 1" or "thread 2" was "first" from a system viewpoint.
When the time of execution is so close for thread 1 and thread 2, the outcome of the race condition doesn't matter. The only requirement should be that one of the threads should define the resulting value.
For the implementation: If update followed by insert results in error "duplicate key", this should be treated as success.
Also, one should of course never assume that value in the database is the same as the value you wrote last.
I had tried below solution and it works for me, when concurrent request for insert statement occurs.
begin tran
if exists (select * from table with (updlock,serializable) where key = #key)
begin
update table set ...
where key = #key
end
else
begin
insert table (key, ...)
values (#key, ...)
end
commit tran
You can use this query. Work in all SQL Server editions. It's simple, and clear. But you need use 2 queries. You can use if you can't use MERGE
BEGIN TRAN
UPDATE table
SET Id = #ID, Description = #Description
WHERE Id = #Id
INSERT INTO table(Id, Description)
SELECT #Id, #Description
WHERE NOT EXISTS (SELECT NULL FROM table WHERE Id = #Id)
COMMIT TRAN
NOTE: Please explain answer negatives
Assuming that you want to insert/update single row, most optimal approach is to use SQL Server's REPEATABLE READ transaction isolation level:
SET TRANSACTION ISOLATION LEVEL REPEATABLE READ;
BEGIN TRANSACTION
IF (EXISTS (SELECT * FROM myTable WHERE key=#key)
UPDATE myTable SET ...
WHERE key=#key
ELSE
INSERT INTO myTable (key, ...)
VALUES (#key, ...)
COMMIT TRANSACTION
This isolation level will prevent/block subsequent repeatable read transactions from accessing same row (WHERE key=#key) while currently running transaction is open.
On the other hand, operations on another row won't be blocked (WHERE key=#key2).
You can use:
INSERT INTO tableName (...) VALUES (...)
ON DUPLICATE KEY
UPDATE ...
Using this, if there is already an entry for the particular key, then it will UPDATE, else, it will INSERT.
In SQL Server 2008 you can use the MERGE statement
If you use ADO.NET, the DataAdapter handles this.
If you want to handle it yourself, this is the way:
Make sure there is a primary key constraint on your key column.
Then you:
Do the update
If the update fails because a record with the key already exists, do the insert. If the update does not fail, you are finished.
You can also do it the other way round, i.e. do the insert first, and do the update if the insert fails. Normally the first way is better, because updates are done more often than inserts.
Doing an if exists ... else ... involves doing two requests minimum (one to check, one to take action). The following approach requires only one where the record exists, two if an insert is required:
DECLARE #RowExists bit
SET #RowExists = 0
UPDATE MyTable SET DataField1 = 'xxx', #RowExists = 1 WHERE Key = 123
IF #RowExists = 0
INSERT INTO MyTable (Key, DataField1) VALUES (123, 'xxx')
I usually do what several of the other posters have said with regard to checking for it existing first and then doing whatever the correct path is. One thing you should remember when doing this is that the execution plan cached by sql could be nonoptimal for one path or the other. I believe the best way to do this is to call two different stored procedures.
FirstSP:
If Exists
Call SecondSP (UpdateProc)
Else
Call ThirdSP (InsertProc)
Now, I don't follow my own advice very often, so take it with a grain of salt.
Do a select, if you get a result, update it, if not, create it.