How can I run J scripts from the console (cmd.exe or Powershell).I tried to set the path to jconsole.exe in Environment Variables but when I tried to launch it via cmd.exe, I get an error message that 'jconsole' is not recognized as an internal command or... I have done this successfully in the past for different command line tools.
Also, how do I set the default directory in J so that I don't have to type the full directory path every time I run a file.
jconsole.exe works just like any other application in that regard. Once you've added the path to the file in your PATH variable, you can run it in a cmd session without specifying the whole path.
In my case, if I open cmd.exe and add the path to J binaries to my PATH (be sure not to add any quotes!):
set PATH=%PATH%;C:\Program Files\j901\bin;
Then check that it has been successfully added to the end by typing PATH and pressing Enter. Then I can successfully start J in that session by just typing jconsole.exe.
Note that this will only work for the current instance of cmd.exe. If I want it be available every time I open a new cmd.exe session, the I'd add it to the Path variable for my User using the Environment Variables Settings.
You mention that you've tried setting the path in Environment Variables, but it might be worth explicitly stating the directory where J is installed on your computer and what you've added to the PATH.
Have you confirmed in your cmd.exe session, that the path has been successfully amended?
Related
I'm using WSL and ConEmu build 180506. I'm trying to setup a task in ConEmu to use the current directory of the active tab when opening a new console but I cannot get it to work.
What I did is to setup the task {Bash: bash} using the instructions on this page
setting the task command as :
set "PATH=%ConEmuBaseDirShort%\wsl;%PATH%" & %ConEmuBaseDirShort%\conemu-cyg-64.exe --wsl -C~ -cur_console:pm:/mnt
Then following the instruction on this page, I added to my .bashrc
if [[ -n "${ConEmuPID}" ]]; then
PS1="$PS1\[\e]9;9;\"\w\"\007\e]9;12\007\]"
fi
and finally setup a shortcut using the macro :
Shell("new_console", "{bash}", "", "%CD%")
But it always open the new console in the default directory ('/home/[username]').
I don't understand what I'm not doing right.
I also noticed that a lot of environment variables listed here are not set. Basically, only $ConEmuPID and $ConEmuBuild seem to be set.
Any help would be appreciated.
GuiMacro Shell was intended to run certain commands, not tasks.
You think you may try to run macro Task("{bash}","%CD%")
Or set your {bash} task parameters to -dir %CD% and just set hotkey for your task.
Of course both methods require working CD acquisition from shell. Seems like it's OK in your case - %d shows proper folder.
I found the answer:
Shell("new_console:I", "bash.exe", "", "%CD%")
The readme is actually pretty good: https://github.com/cmderdev/cmder/blob/master/README.md
I have just installed MSys2 (https://msys2.github.io, msys2-x86_64-20150916.exe) on my Windows 10 computer.
Once installed, the terminal is launched. But as soon as I stop it and relaunch it, I get the error: "Failed to run /sbin/nologin: No such file or directory".
Any idea on what to do?
You should figure out why Bash is trying to run /sbin/nologin. Check your Windows home directory (e.g. C:\Users\Joe) for files like .bash_profile, .profile, and .bashrc. Inspect those files and find which one is calling nologin.
If that doesn't help, try creating an empty file in C:/msys64/sbin/nologin, or wherever you actually installed MSYS2. An empty file would be a valid shell script and run without errors.
If the error is non-fatal you might consider just ignoring it.
How do I set up K Version Manager (KVM) properly so I can run KVM by typing "KVM" anywhere in powershell later? Do I have to add pathing to the HOME repo?
Run kvm use and pass the -p (persistent) argument. This will add kvm to the user's path or to the system path, if combined with -g.
If you run kvm help you will get all the available arguments:
kvm use <semver>|<alias>|none [-x86][-x64] [-svr50][-svrc50] [-p|-persistent] [-g|-global]
<semver>|<alias> add KRE bin to path of current command line
none remove KRE bin from path of current command line
-p|-persistent add KRE bin to PATH environment variables persistently
-g|-global combined with -p to change machine PATH instead of user PATH
Try out the Getting Started section at aspnet\Home.
Once you execute the kvmsetup.cmd it will add kvm to the path for all future powershell\command line sessions.
Here is the related error its showing:
java.exe is not a recognized file as an internal or external command,
operable or external command
errorlevel=9009
i was getting the same error on WIndows 8.1(64 bit) and checked java path but it was ok
so i just run my jmeter.bat with Run as Administrator and it worked for me
Many operating systems have an environment variable such as PATH that contains a list of directories (or folders) to be searched when looking for a command to execute. Commands that can be found via the PATH are commonly called external commands. The program that reads the command line or the batch file and invoked the commands may have a number of built in commands, these are commonly called internal commands.
I suggest you examine the PATH (or equivalent) set when your java command executes from the command line and also when execution is attempted from the batch file. Compare the two and make sure the directory containing your java.exe is in the PATH.
Does not work with Java 9 beta:
Running:
C:\java -version
Gives:
java version "9-ea"
Just go into command line and run:
java -jar ApacheJMeter.jar
Set the correct Java Path (installed in your system) in Computer -> Advanced System settings -> Environment Variables -> Ok -> System Variables -> Path
I got the same issue and resolved by following the above steps.
I tried everything, this eventually worked.
Within System Variables:
PATH = "C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.8.0_101\bin"
May help someone.
This error occurs due to the path has not been set properly.
Either you can set it in environmental varialables or right click jmeter .bat file,choose edit set the path their,for reference see the jmeter.apache.org user manuals.
For me, my Java path has a space in it and jmeter said it can't find Java
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home
.. I looked at the jmeter.sh script and saw it got the path from "Plugin-Ins" .. onward. I tried just commenting out the exit command after that check in the script .. and then I was able to run jmeter.
So apparently the validation logic has a bug, where the error message about can't find java is in fact not true (if Java is indeed set up correctly), so it can be ignored.
For windows 8.1 Users:
Error when trying to run jmeter.bat
Error message:
Not able to find Java executable or version. Please check your Java installation. errorlevel=2
Press any Key to continue
Resolution:
Right Click jmeter.bat and Run as Administrator.
This worked for me, hope this helps. Good luck
Set the correct JM_LAUNCH variable to java.exe
For Windows XP users set Java environment by following the steps here:
http://www.tutorialspoint.com/jmeter/jmeter_environment.htm
Note the path depends on your installed JDK.
And download the file from:
https://svn.apache.org/repos/asf/jmeter/trunk/bin/jmeter.bat
Then replace your jmeter.bat with the downloaded file.
If you have installed Java and still you get this error, please set the java_home path to below using typing below command in terminal:
export JAVA_HOME="/Library/InternetPlugIns/JavaAppletPlugin.plugin/Contents/Home"
Since I run many versions of Java.. I modified jmeter.bat.
rem JM_START - set this to "start" to launch JMeter in a separate window
rem this is used by the jmeterw.cmd script.
rem
rem =====================================================
setlocal
rem Minimal version to run JMeter
set MINIMAL_VERSION=1.8.0
set PATH=%PATH%;C:\Program Files (x86)\IBM\Java80\jre\bin <<< add This line to jmeter.bat
Copied the JAVA executable from Installed version of Java from C:\Program FilesJava\jdk1.8.0_191\bin and pasted in the folder where the jmeter bat resides and it worked for me.
Not exactly the same issue but somebody might find it helpful
Do not double click jmeter.bat but instead ApacheJMeter.jar in the same directory
For me jmeter.bat run but for a brief moment closing almost immediately and not prompting any error. Above workaround allowed me to start working
if JAVA -version shows as blank or empty in the command prompt (CMD) then you need to clear the all java paths in environment variable and again add JAVA_HOME=C:\Program Files\Java\jdk-11.0.15.1
path= C:\Program Files\Java\jdk-11.0.15.1\bin;
if you see C:\Program Files\Common Files\Oracle\Java\javapath; like this remove this
and try in new CMD prompt then Java -version will work.
I need to start a document on a remote computer instead of an executable file, using PSExec.
I tried to provide the file name of a jpg file to psexec associated with the -c command to copy the file, but the message returned for documents (and not executables) is always "The system cannot find the file specified."
Anyone any ideas what the command-line for psexec should be?
Try to use the command:
cmd.exe /c START c:\path\to\document.jpg
Document must be on the remote computer, so you have to copy it there by other command before calling psexec.
Pick a program on that other machine that can show the JPEG and execute that, passing to it the path and name to the file you want to show.
As you've noticed, file associations doesn't work with remote execution like that, so you need to invoke the correct program instead.
In order to open a remote program and not only activate its process you have to use PSEXEC
with the -i (Interactive Mode) and MUST define the session number.
For example:
Usually on a Win7 host:
Console = Session 0
System = Session 1
User = Session 2
In order to activate and open notepad.exe on this remote Win 7 host use the following syntax:
psexec -i 2 \\ComputerName -u User -p Pass notepad.exe
Regards,
Shai Ziv
shaix.ziv#intel.com
This is the way that worked for me:
I've logged on to the via RDP:
I've copied a picture to the to "C:\Users<MyUserName>\Pictures\smiley.png"
I've opened a new powershell-window, typed "tasklist" and found out my windows session id (I simple took the highest session id I've found)
Back on my own PC:
I've downloaded PSTOOLS from https://download.sysinternals.com/files/PSTools.zip
I've unpacked PSTOOLS and placed it in "C:\Program Files\PSTools"
I've opened a new powershell-window and typed: cd "C:\Program Files\PSTools"
Finally i've started the remote PAINT with:
"C:\Program Files\PSTools\psexec" -s -i 4 "\\[RemoteComputerName]" "C:\Windows\system32\mspaint.exe" "C:\Users\[MyUserName]\Pictures\smiley.png"
P.S.: Don't forget to replace [RemoteComputerName] and [MyUserName]