My code uses a column called booking status that is 1 for yes and 0 for no (there are multiple other columns that information will be pulled from dependant on the booking status) - there are lots more no than yes so I would like to take a sample with all the yes and the same amount of no.
When I use
samp = rslt_df.sample(n=298, random_state=1, weights='bookingstatus')
I get the error:
ValueError: Fewer non-zero entries in p than size
Is there a way to do this sample this way?
If our entire dataset looks like this:
print(df)
c1 c2
0 1 1
1 0 2
2 0 3
3 0 4
4 0 5
5 0 6
6 0 7
7 1 8
8 0 9
9 0 10
We may decide to sample from it using the DataFrame.sample function. By default, this function will sample without replacement. Meaning, you'll receive an error by specifying a number of observations larger than the number of observations in your initial dataset:
df.sample(20)
ValueError: Cannot take a larger sample than population when 'replace=False'
In your situation, the ValueError comes from the weights parameter:
df.sample(3,weights='c1')
ValueError: Fewer non-zero entries in p than size
To paraphrase the DataFrame.sample docs, using the c1 column as our weights parameter implies that rows with a larger value in the c1 column are more likely to be sampled. Specifically, the sample function will not pick values from this column that are zero. We can fix this error using either one of the following methods.
Method 1: Set the replace parameter to be true:
m1 = df.sample(3,weights='c1', replace=True)
print(m1)
c1 c2
0 1 1
7 1 8
0 1 1
Method 2: Make sure the n parameter is equal to or less than the number of 1s in the c1 column:
m2 = df.sample(2,weights='c1')
print(m2)
c1 c2
7 1 8
0 1 1
If you decide to use this method, you won't really be sampling. You're really just filtering out any rows where the value of c1 is 0.
I was able to this in the end, here is how I did it:
bookingstatus_count = df.bookingstatus.value_counts()
print('Class 0:', bookingstatus_count[0])
print('Class 1:', bookingstatus_count[1])
print('Proportion:', round(bookingstatus_count[0] / bookingstatus_count[1], 2), ': 1')
# Class count
count_class_0, count_class_1 = df.bookingstatus.value_counts()
# Divide by class
df_class_0 = df[df['bookingstatus'] == 0]
df_class_0_under = df_class_0.sample(count_class_1)
df_test_under = pd.concat([f_class_0_under, df_class_1], axis=0)
df_class_1 = df[df['bookingstatus'] == 1]
based on this https://www.kaggle.com/rafjaa/resampling-strategies-for-imbalanced-datasets
Thanks everyone
Related
Pandas help!
I have a specific column like this,
Mpg
0 18
1 17
2 19
3 21
4 16
5 15
Mpg is mile per gallon,
Now I need to replace that 'MPG' column to 'litre per 100 km' and change those values to litre per 100 km' at the same time. Any help? Thanks beforehand.
-Tom
I changed the name of the column but doing both simultaneously,i could not.
Use pop to return and delete the column at the same time and rdiv to perform the conversion (1 mpg = 1/235.15 liter/100km):
df['litre per 100 km'] = df.pop('Mpg').rdiv(235.15)
If you want to insert the column in the same position:
df.insert(df.columns.get_loc('Mpg'), 'litre per 100 km',
df.pop('Mpg').rdiv(235.15))
Output:
litre per 100 km
0 13.063889
1 13.832353
2 12.376316
3 11.197619
4 14.696875
5 15.676667
An alternative to pop would be to store the result in another dataframe. This way you can perform the two steps at the same time. In my code below, I first reproduce your dataframe, then store the constant for conversion and perform it on all entries using the apply method.
df = pd.DataFrame({'Mpg':[18,17,19,21,16,15]})
cc = 235.214583 # constant for conversion from mpg to L/100km
df2 = pd.DataFrame()
df2['litre per 100 km'] = df['Mpg'].apply(lambda x: cc/x)
print(df2)
The output of this code is:
litre per 100 km
0 13.067477
1 13.836152
2 12.379715
3 11.200694
4 14.700911
5 15.680972
as expected.
I have a dataframe of few hundreds rows , that can be grouped to ids as follows:
df = Val1 Val2 Val3 Id
2 2 8 b
1 2 3 a
5 7 8 z
5 1 4 a
0 9 0 c
3 1 3 b
2 7 5 z
7 2 8 c
6 5 5 d
...
5 1 8 a
4 9 0 z
1 8 2 z
I want to use GridSearchCV , but with a custom CV that will assure that all the rows from the same ID will always be on the same set.
So either all the rows if a are in the test set , or all of them are in the train set - and so for all the different IDs.
I want to have 5 folds - so 80% of the ids will go to the train and 20% to the test.
I understand that it can't guarentee that all folds will have the exact same amount of rows - since one ID might have more rows than the other.
What is the best way to do so?
As stated, you can provide cv with an iterator. You can use GroupShuffleSplit(). For example, once you use it to split your dataset, you can put the result within GridSearchCV() for the cv parameter.
As mentioned in the sklearn documentation, there's a parameter called "cv" where you can provide "An iterable yielding (train, test) splits as arrays of indices."
Do check out the documentation in future first.
As mentioned previously, GroupShuffleSplit() splits data based on group lables. However, the test sets aren't necessarily disjoint (i.e. doing multiple splits, an ID may appear in multiple test sets). If you want each ID to appear in exactly one test fold, you could use GroupKFold(). This is also available in Sklearn.model_selection, and directly extends KFold to take into account group lables.
I have a data frame with all columns in discrete format. I apply the following code to generate a BN using bnlearn package. However I get this error that says "score 'bic' may be used with discrete data only" while essentially my data are discrete! Here is a sample of my data:
A B C
3 2 0
0 0 5
5 1 7
0 0 2
4 6 1
And this is what I run:
> test=hc(dat, score="bic")
Error in check.score(score, x) :
score 'bic' may be used with discrete data only.
I don't get why my data is not seen as discrete?
I have a dataframe with ordered times (in seconds) and a column that is either 0 or 1:
time bit
index
0 0.24 0
1 0.245 0
2 0.47 1
3 0.471 1
4 0.479 0
5 0.58 1
... ... ...
I want to select those rows where the time difference is, let's say <0.01 s. But only those differences between rows with bit 1 and bit 0. So in the above example I would only select row 3 and 4 (or any one of them). I thought that I would calculate the diff() of the time column. But I need to somehow select on the 0/1 bit.
Coming from the future to answer this one. You can apply a function to the dataframe that finds the indices of the rows that adhere to the condition and returns the row pairs accordingly:
def filter_(x, threshold = 0.01):
indices = df.index[(df.time.diff() < threshold) & (df.bit.diff().abs() == 1)]
mask = indices | indices - 1
return x[mask]
print(df.apply(filter_, args = (0.01,)))
Output:
time bit
3 0.471 1
4 0.479 0
From my "Id" Column I want to remove the one and zero's from the left.
That is
1000003 becomes 3
1000005 becomes 5
1000011 becomes 11 and so on
Ignore -1, 10 and 1000000, they will be handled as special cases. but from the remaining rows I want to remove the "1" followed by zeros.
Well you can use modulus to get the end of the numbers (they will be the remainder). So just exclude the rows with ids of [-1,10,1000000] and then compute the modulus of 1000000:
print df
Id
0 -1
1 10
2 1000000
3 1000003
4 1000005
5 1000007
6 1000009
7 1000011
keep = df.Id.isin([-1,10,1000000])
df.Id[~keep] = df.Id[~keep] % 1000000
print df
Id
0 -1
1 10
2 1000000
3 3
4 5
5 7
6 9
7 11
Edit: Here is a fully vectorized string slice version as an alternative (Like Alex' method but takes advantage of pandas' vectorized string methods):
keep = df.Id.isin([-1,10,1000000])
df.Id[~keep] = df.Id[~keep].astype(str).str[1:].astype(int)
print df
Id
0 -1
1 10
2 1000000
3 3
4 5
5 7
6 9
7 11
Here is another way you could try to do it:
def f(x):
"""convert the value to a string, then select only the characters
after the first one in the string, which is 1. For example,
100005 would be 00005 and I believe it's returning 00005.0 from
dataframe, which is why the float() is there. Then just convert
it to an int, and you'll have 5, etc.
"""
return int(float(str(x)[1:]))
# apply the function "f" to the dataframe and pass in the column 'Id'
df.apply(lambda row: f(row['Id']), axis=1)
I get that this question is satisfactory answered. But for future visitors, what I like about alex' answer is that it does not depend on there to be exactly four zeros. The accepted answer will fail if you sometimes have 10005, sometimes 1000005 and whatever.
However, to add something more to the way we think about it. If you know it's always going to be 10000, you can do
# backup all values
foo = df.id
#now, some will be negative or zero
df.id = df.id - 10000
#back in those that are negative or zero (here, first three rows)
df.if[df.if <= 0] = foo[df.id <= 0]
It gives you the same as Karl's answer, but I typically prefer these kind of methods for their readability.