I try installing "react native web view" but when I run "npm install --save react-native-webview" it takes a lot of time and nothing will happen. And when I try using yarn to install the library I get the following error:
There appears to be trouble with your network connection. Retrying...
I do not have any problem with internet connectivity or proxy! I can run npm install well but I cannot install the library at all.
I have tried to increase npm timeout but the related command does not work too. Please help me...
I solved my problem with using these two commands.
npm config rm proxy
npm config rm https-proxy
Related
I am trying to install an NPM package in a project but the installation does not go beyond the buildDeps phase and after a while it gives me the error ECONNRESET. This happens to me with any package I try to install:
I tried to install Express and Angular and couldn't.
Try connecting your device to Internet. NPM is a Package manager which add packages stored in servers and deliver to their users.
If problem still persists, try to install NodeJS again
I am trying to develop a react native application on MacOS, but I have been running into issues with installing watchman onto the machine. I have been running the command brew install watchman and whenever I enter the command watchman version the output displays version: 0.0.0. However, directly after running the first installation command over again, I see Warning: watchman 2022.06.06.00 is already installed and up-to-date which is really confusing me.
I have tried various different troubleshooting techniques such as uninstalling and reinstalling watchman, instead of using brew I attempted using sudo port install watchman with MacPorts, removing the .watchmanconfig file and re-creating it, and lastly restarting my device, but none of these solutions have seemed to work for me.
Whenever, I open my react native project and run the command npm start, this is the output that I see,
jest-haste-map: Watchman crawl failed. Retrying once with node crawler.
Usually this happens when watchman isn't running. Create an empty `.watchmanconfig` file in your project's root folder or initialize a git or hg repository in your project.
...
watchmanResponse: {
error: 'std::__1::system_error: open: /Users/USER/Desktop/ReactNativeApp: Operation not permitted',
version: '0.0.0'
}
This error message ends the npm start and because of this, I am unable to run npm run ios and continue with the development of the application. If anyone happens to know of any fixes or has experienced this before I would appreciate it if you share how I can resolve it. Thank you.
We can resolved this when we put our project outside from those folder Desktop,Download and Document
then run
npm start
It will be work
thanks
I'm trying to run expo with a tunnel connection and I keep getting the following error:
Error starting tunnel Failed to install #expo/ngrok#^2.4.3 globally: npm exited with non-zero code: 243
I've tried installing this version of ngrok globally and just within my project as well as removing it to allow expo to do the install automatically. It did run successfully once by starting the project with expo start instead of npm start but this seems to no longer work.
run npm install #expo/ngrok#2.4.3
Install ngrok and run it in terminal using this command ngrok http 3000.
Then in other terminal run expo start.
It will work surely.
The instructions are not intuitive, so here is a fix:
npm install #expo/ngrok
brew install ngrok
ngrok http 3000
expo start --tunnel
Wish Expo simplifies this; they shouldn't have a button that says "tunnel" if there is an entire setup that's not properly explained.
I am using react native and Expo. I am unable to build new app because after I use expo init appName it shows the following error.
Heres the full message:
📦 Using npm to install packages. You can pass --yarn to use Yarn instead.
√ Downloaded and extracted project files.
× Something when wrong installing JavaScript dependencies. Check your npm logs. Continuing to initialize the app.
✅ Your project is ready!
To run your project, navigate to the directory and run one of the following npm commands.
- cd Scanner
- npm start # you can open iOS, Android, or web from here, or run them directly with the commands below.
- npm run android
- npm run ios # requires an iOS device or macOS for access to an iOS simulator
- npm run web
I tried multiple times to create a blank project, also tried npm install to install failed/not downloaded libraries and continue after failure but it showed another error:
npm ERR! code Z_BUF_ERROR
npm ERR! errno -5
npm ERR! zlib: unexpected end of file
also tried npm cache verify that showed cache is ok Content verified: 3562 (252580364 bytes).
So, How can I solve this issue?
Problems related to npm installation are very common If you do any mistake in early installation, but is avoided. Learn more about npm tree.
Steps worked for me are :
npm cache clean --force
npm cache verify
npm -g uninstall expo-cli --save
npm install expo-cli --global
expo init app-name
cd app-name
npm start
Always run as administrator if working on Windows and in root directory.
The solutions above didn't work for me but if you use 'npm install' in the directory of the app you get a clue that you shuold try 'npm install --force'
err message
You should have all these files folders and files at the start of the project otherwise not all the dependencies have been installed which is why we were getting the problem.folder structure
After you have added --force to npm install you have all the dependencies installed. Now you can run the app with npm start.
Unfortunately, all the solutions described above didn't work on my machine...
Here is my latest solution for this problem...
This worked 100% on my machine...
Use npm i -g expo-cli
This will automatically add the required packages and also remove the unnecessary ones.
Yes, surely, you don't need to uninstall and re-install it again.
Just follow my steps.
And, you can create your expo project using expo init.
I hope my solution will help you out from this annoying problem....
I just did npm install and it worked for me, but I had do that every time I create a new expo project.
I also encountered this problem, and finally found that it was the problem of react native cli,I installed the latest version of react native cli,Expo is back to normal
This Error is regarding to the git account. expos need a git account to setup react native project
If you are using windows you need to install git in your local PC
after that open your Terminal and type this command
git config --global user.name "your_username"
git config --global user.email "your_email_address#example.com"
after that clone any github project to your local computer. it will ask to login to Github
after all these steps try expo init <projectname>
The simple way to settle that error is by using "expo-cli init app-name" instead of "expo init app-name".
I tried and worked perfectly for me. Hope it will help you guys.
i have faced a similar problem and running yarn set version 1.22.1 fix it
Run the Command Prompt as an administrator. And run the following command:
npx create-expo-app AwesomeProject
Every time I try to create a new project (vue create my-project), I get this error:
ERROR : command failed: npm install --loglevel error
I'm on PC / Windows 10, Vue-cli 3.2.1, Node 8.11.3, Npm 5.6.0.
Presets:
Babel, ESLint & Prettier, SASS, Vue router, Vuex
From the log:
2736 silly saveTree `-- vuex#3.0.1
2737 warn ajv-keywords#2.1.1 requires a peer of ajv#^5.0.0 but none is
installed. You must install peer dependencies yourself.
2738 verbose stack Error: EINVAL: invalid argument, read
Any idea what that means and how to solve it?
EDIT: I figured out that excluding any lint feature makes the problem disappear. So the question becomes: how can I still use linting and make it work?
Try
npm cache clean --force
If it doesn't work then manually delete %appdata%\npm-cache folder. Then try to create the project again.
Try pointing the npm registry url from 'https' to 'http'
Run following command :
npm config set registry="http://registry.npmjs.org/"
Then try creating vue project :
vue create my-project
It worked for me.
OR
Try :
sudo npm cache clean -f
npm update
npm update -g #vue/cli
vue create vue-first-app
I've tried everything above but still the error kept occuring. Finally I upgraded my npm version and node version, both to the latest ones and it worked.
Try using 'Dart-Sass' instead of using 'Node-Sass'. This will create your Vue project without any errors.
I am using "vue-cli 3.0.0-rc.1", I solve the problems by setting the ~/.vuerc from "useTaobaoRegistry": true, to false. Hope it help to you!!
The reason behind the error is , u are having an outdated version of node js. Try to reinstall node js and the probelm will get fixed("dont forget to uninstall and clear all the node js file before re-installing ")
I am using vue-cli 3.7.0-rc.1, I solve the problems by editing the ~/.vuerc from "useTaobaoRegistry": false to true.
Hope it works for you!
change permission by using the cli
npm config set unsafe-perm true
The problem is on the CLI
npm cache clean --force
%appdata%\npm-cache Just run on the "Run" Then Delete all the files
npm install -g #vue/cli
Just use npm 6 or greater
vue create projectName
problem solved 100% work for me
cheers
If you run into this issue on a Mac or Linux machine, you may simply need to sudo.
sudo vue create my-project
If you run into it on Windows, you may resolve the issue by running the terminal as admin.
I had the same issue. You have to use the command vue config --set useTaobaoRegistry false. After that it worked for me.
I had same issue when i was installing vue-cli with npx .... tried all the solutions from google.. nothing worked for me ..
so then i moved to install vue-cli with yarn package manager
thats when i figured out the issue ..
my issue was basically my node version which was 8.x.x but yarn was expecting 10.x.x
with nvm i have installed latest node which is 16.x.x
then tried installing vue-cli with yarn ..
it worked like charm!!!!
Source: https://medium.com/tableless/sass-vs-stylus-28c7e2884f1a
base language
Sass: Ruby
Stylus: JavaScript
Take out sass and use stylus. It will work.
I had the same issue using Ubuntu 20.04 OS. I used the command
npm install --loglevel error --legacy-peer-deps
and it worked for me.
Likely issue is your proxy settings:
I was having this issue recur intermittently and in the end I found out it was being caused by network proxy issues. See this article on how run npm behind a proxy server