I am implementing Prebid.js. I am trying to work with Medianet. I keep getting an error response from the Medianet server: {"ext":{"nbr":"server_err_cfg"}}.
Support from Media.net hasn't responded yet. Any ideas on what can be the best solution to this? Also, do I need to have hb_pb for the key value in DFP (Google Ad Manager) or do I need to setup the line items with hb_pbmedianet?
Thanks.
You don't need separate key values for medianet (hb_pbmedianet) unless you are using sendAllBids configuration with Prebid.
Sounds like the IDs you are passing to the Media.net adapter are incorrect.
I would check them again again and be sure you are passing the right parameters to the ad unit. According to the Medianet docs, you need a cid and crid, both strings. Make sure these are 100% correct.
Related
I'm currently attempting to integrate with the Neto Ecommerce API. I've hit all sorts of limitations that I never see on other platforms and the latest is to do with custom fields.
The API Im using is the GetOrders API, and Im following the requirements to fetch transaction information, however custom fields appear to be missing. Hoping someone out there has made use of this API to extract custom fields and can advise on how to go about getting custom field information.
Any tips appreciated
var netoString = '{"Filter":{"OrderID":[""],"OutputSelector":["ID","ShippingOption","DeliveryInstruction","RelatedOrderID","cust1"]};
Is there an undocumented naming convention used to fetch custom fields or other pattern I can try to see if I can fetch the data?
I am not certain this will be the same for the API, but when using exports the correct format to access Custom Sales Order Fields is "customer_ref1".
To get a Custom Customer Fields is "usercustom1"
Note: For the Custom Customer Fields, the numbers do not match up correctly (I.E. usercustom1 doesn't match misc1 in the cpanel). The correct matches are:
misc1=usercustom1
misc2=usercustom4
misc3=usercustom5
misc4=usercustom6
misc5=usercustom7
misc6=usercustom11
misc7=usercustom12
misc8=usercustom13
misc9=usercustom14
misc10=usercustom15
misc11=usercustom16
misc12=usercustom17
misc13=usercustom18
misc14=usercustom19
misc15=usercustom20
misc16=usercustom21
misc17=usercustom22
misc18=usercustom23
misc19=usercustom24
misc20=usercustom25
misc21=usercustom10
misc22=usercustom26
misc23=usercustom27
misc24=usercustom28
misc25=usercustom29
misc26=usercustom30
misc27=usercustom31
misc28=usercustom32
misc29=usercustom33
misc30=usercustom34
misc31=usercustom35
misc32=usercustom36
misc33=usercustom37
misc34=usercustom38
misc35=usercustom39
misc36=usercustom40
I'm using the Dark Sky Forecast API to retrieve some weather information.
When I read the official doc, I found that the "option" section describes the usage of query parameters.
For example,
The API request may optionally be modified through the use of query parameters. It will respond to the following:
callback=[callback]: Return the API response as JSONP. Please use
caution when using this, since exposing your API key to the public is
a security hazard and, if abused, will result in the revokation of
your API key. However, if developing a personal- or internal-use app,
this is a convenient method of doing so.
units=[setting]: Return the
API response in units other than the default Imperial units. In
particular, the following settings are possible:
us: The default, as outlined above.
si: Returns results in SI units. In particular, properties now have the following units:
...
I know how to get the weather information by take advantages of the call
https://api.forecast.io/forecast/APIKEY/LATITUDE,LONGITUDE
But I don't know how to combine the query parameters with it.
Any ideas?
2015/10/23 UPDATE
Thank to Logan Kearns, using ? parameter solved my question. Make sure the query parameters are in lowercase.
https://api.forecast.io/forecast/APIKEY/LATITUDE,LONGITUDE?lang=zh-tw&units=si
This is how you change the units. I assume that other query parameters would be set in a similar manner, using the '?' to separate them.
https://api.forecast.io/forecast/APIKEY/LATITUDE,LONGITUDE?UNITS=us
Just an update, since url changed and with few other parameters:
You can add units to mention the type of unit conversion required
You can add exclude for excluding certain data in the response like hourly updates.
https://api.darksky.net/forecast/APIKEY/LAT,LONG?units=si&exclude=minutely,hourly,daily,alerts
You can check here:
https://labs.aweber.com/docs/code_samples/subs/create
The script to add a new subscriber to the list via api requires those two pieces info...only I cannot figure out for the life of me what those two variables are!! I've beaten through every little aspect of my Aweber Subscriber Account, AND my Aweber Labs account...and I can't find any reference to either of those variables anywhere. I've submitted some tickets to them, and haven't gotten any response yet.
Does anyone have any ideas here? I've tried my account names, my list names, to no avail!
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Okay, I've got it! You can get the values of both of these variables by dumping some other variables in the aweber api after making certain api calls.
get the account id first:
$account = $aweber->getAccount($accessKey, $accessSecret);
then vardump or print_r $account.
next we get the list id:
$account = $aweber->getAccount($accessKey, $accessSecret);
$list_url = 'https://api.aweber.com/1.0/accounts/<id>/lists';
$lists = $account->loadFromUrl($list_url);
then vardump or print_r $lists.
And you are all set! I'm so happy I figured this out, it freakin took long enough. Hopefully this saves some one a bit of time.
I too have agonized over finding the $list_ID, so went to deactivate the list, and create a new one, and "discovered" that if you hover over the Deactivate button, you get a url you can copy, and this gives both %account and %list Ids
https://www.aweber.com/users/lists/deactivate/$accountID/$lisID
like this....
https://www.aweber.com/users/lists/deactivate/123456/123456
Hopefully this will help make someone as it is a super easy solution
The proper answer is Anne Allen's one, but...
Check the return of the /accounts endpoint. It should return the same account id as you detected in the link, but I had cases they were different (strange, isn't it?). Use the account id returned by the /accounts endpoint and other endpoints to retrieve lists, subscribers, etc. will start to work. It's like if some accounts have two ids, one partially works and the other fully works.
Let me tell you how to get $list_id value... login into your AWeber account and then create a new list copy only integer value from list's name.
At first, login.
1) click Reports>Settings. Your account ID will be displayed in the box,example: ?id=XXXXX
2) click List Options>List Settings. There you will see the list ID under the name.
p.s. To add subscriber, you can use this - Automatically add into aweber list
I try to add some pictures to a simple product, which was created (without error) by the API. The product is shown in frontend its functional with all wanted attributes. But if I check afterwards
$client->call($sessionId, 'product.info', '123456');
I get Soap Error: "101: Product doesn't exists". But its definitivly reachable over back- and frontend. (Cache cleared, Index refreshed)
Same issue, when I try to add media informations. On Confugurable Products the error don't show up and the pictures are added whithout any problems.
Maybe I messed something up with the attributes or the attribut sets... I don't know, where to watch first.
I'm at my php’s end!
Using Magento 1.6.0.0
Thank your for clarify me.
Best regards.
Since the ame API function ("product.info" in this case) receive as a parameter both SKU and ID, there is a problem if your are looking for SKU's which is numeric values.
To avoid this problem, we always adding space to the end of SKU before sending it to the API. For example, if your SKU is "123456" you should send "123456 " to the API.
Have you tried this call with your product id instead of the sku? I had some problems in the past with product calls and the sku.
I've installed 2 magentos and we always use numeric SKUs and I've always had this problem.
I've solved it by modifying the file:
app/code/core/Mage/Catalog/Model/Api/Resource.php
About line 122 that reads:
$product = Mage::helper('catalog/product')->getProduct($productId, $this->_getStoreId($store), $identifierType);
I've changed it to:
$product = Mage::helper('catalog/product')->getProduct($productId, $this->_getStoreId($store), 'sku');
This way the function always expects an SKU.
This is the data that I get back from the rubycas server.
{
"cn"=>"--- - Toby Joiner",
"sn"=>"--- - Joiner",
"mail"=>"--- - tobyjoiner#xxxxxx.xxx",
"memberof"=>"---
- CN=All Users,OU=AllUsers,DC=bnw,DC=local
- CN=Administrators,CN=Builtin,DC=bnw,DC=local
- CN=Remote Desktop Users,CN=Builtin,DC=bnw,DC=local",
"givenname"=>"--- - Toby"
}
I am wondering if there is a way I am supposed pull this data out, right now I am doing:
first_name = session[:cas_extra_attributes][:sn].gsub('-','')
to remove the dashes. I am hoping I am just missing the built in way to get the extra data out from the rubycas server.
That looks like YAML escaped data. You should be able to get rid of it by first parsing it through YAML.load and then processing it as you wish.
As a small aside, I've personally re-implemented the basic functions of rubycas-server as a Rails engine called cassy. However, I don't think it supports sending through extra attributes at the moment.
I just thought I'd mention it as it gives you an alternative to try if rubycas-server doesn't work out.