let me further elaborate on my concern:
I am working on some test reports on BIRT to be familiarized with it and came across an unsettling problem.
I created a data source that connects to a test SQL Server database, a data source that will return building, floor, room, and the number of employees that contain more than one employee, and two String parameters that lets the user choose the building and floor so the report filters by just that one.
The problem happens when I test it with a building and floor that I know are in the result set. For some reason the report filters a blank result, as if the building and floors are not present in the data set result.
I tried filtering by just the building first and then the floor but the same thing happens. If I take out the filter then the report shows up without a problem.
Why does this happen? I am assuming it's the way I input the parameters, but I am not sure.
Can anyone help me? Thanks!
Related
How do I link my activities variable to only the corresponding KPIs variable?
Using guidance from a number of sources, but primarily the genius of Jeffery Shafer articulated through the SuperDataScience video, I built a Sankey Diagram for my work. For the most part it works, however, I have been trying to figure out how to adjust my Sankey Diagram model to line up each activity with ONLY the corresponding KPIs, but am having no luck.
The data structure looks like this:
You'll note I changed the binary value to "", 2 instead of 0, 1 as it makes visual calculations easier. For the "Viz" variable, I have "Activity" for the raw data set, then I copy/paste/replicate the data to mirror the data (required for the model) but with "KPI" for the mirrored data.
In the following image, you'll see my main issue is that the smallest represented activity still shows as corresponding to all KPIs when in fact it does not. I want activity to line up only with the corresponding KPIs as some activities don't correspond with all, or even any, KPIs.
Finally, here is the model very similar to what the above video link shows:
Can someone help provide insight into how I can adjust the model to fit activities linking only to corresponding KPIs? I appreciate any insight. Thanks!
I have a solution to the issue, thanks to a helpful Tableau support member named Anthony. It was in the data structure. The data was not structured to only associate "Activities" with their "KPI" values within Tableau's requirements, but every "Activities" value with every "KPI" value. As a result, to achieve the desired result, the data needs to be restructured to only contain a row for every valid "Activities" and "KPI" combination. See the visual below where data is removed to format properly:
-------------------------------------->
Once the table is restructured, the desired visual result should configure with the model. It works like a charm!
Good luck out there!
So my problem here is that I have a Part number which lives in two warehouses hence it has two bin locations. If I just use =Fields!PrimBin.Value it only ever returns the first location. I need to display the PrimBin if the location is from a specific warehouse. To get the warehouse I use =Fields!WarehouseCode.value
What I need to do is only show the PrimBin.Value of MAINWHSE and not CELLWHSE
Thanks in advance.
Ok so the database it quite vast. However, for the information required I am using two tables. Part and PimWhse.
Part shares the Product ID to PrimWhse. In PrimWhse each partID has two locations "MAINWHSE", "CELLWHSE "and 1 bin to pick in each warehouse giving to possible locations.
So WarehouseCode.Value will have the information for which warehouse the part is located. and PrimBin.Value will have the warehouse position ID stored in it.
This is all setup via report style within the Epicor system. When I create a query in business activity to look in MAINWHSE it shows the correct information.
However, in the report data builder I'm not able to set this query so I assume SSRS will be able to see of both theses possible values for PrimBin.Value!? If not I guess I need to work out how to add a query to report data builder, which at the moment does no seem possible?
Thanks again.
"meta/background about the use of code and person using it"
1.site built by professional that left company,
2.I am inexperienced but trying/ want to learn,
3.Customer support site for service reps,
................................................
What im trying to do exactly per stackoverflows parameters.
We have a drop down box listing issues that the customer had in a column labeled "issue_type". I can export via csv entire table load onto excel then give to boss for overall review of what the issues were. However data base has a "hide" column. Its function is that when the row is updated the record is kept but the same "job or call" has only one viewable report on site (the most recently updated one). Hide is a boolean. In conclusion I want to export rows that only has the "hide" column Boolean status at 0, AND to only export the columns "customer", and "issue_type". I can seem to only do one or the other. and have researched a minimum of 4 hours to find answer myself and cannot find a syntax to do both at the same time with phpmyadmin.
I dont want an enormous data that is mostly useless but for issue type and customer but i will have to manually delete all the rows with hide = 1?
Thanks anyone 1st attempt question sorry if not correct for stackflow.
SELECT Customer,Issue_type FROM tickets where hide =0;
Elaborating on what is above for anyone that may be looking for a similar answer, SQL supports the "where" clause of which you can when properly syntaxed select many of your columns and their associated strings, booleans, and numbers to = what your looking for. Wildcards I found later for other uses work as well.
Sorry about the self answer but hopefully someone finds this usefull
it might be possible I'm searching for the wrong keywords, but so far I couldn't find anything useful.
My problem is quite simple: At the moment I get a list of individual Ids through a report parameter, I pass them to a procedure and show the results.
The new request is like this: Instead of showing the list for all individuals at once, there should be a list for each individual id.
Since I'm quite a beginner in srss, I thought the easiest approach would be the best: Create a subreport, copy the shown list, and create a subreport per individual id.
The amount of this IDs is dynamic, so I have to create a dynamic amount of subreports.
Funny enought, this doesnt seem to be possible. This http://forums.asp.net/t/1397645.aspx url doesnt show exactly the problem, but it shows the limit of the subreports.
I even ran trough the whole msdn pages starting http://technet.microsoft.com/en-us/library/dd220581.aspx but I couldnt find anything there.
So is there a possibility, to create a loop like:
For each Individual ID in Individual IDs, create a subreport and pass ONE ID to this?
Or is there another approach I should use to make this work?
I tried to create a 'Fake'-Dataset with no sql query but just for iterating the id list, but it seems the dataset needs a data-source...
As usual, thanks so far for all answers!
Matthias Müller
Or is there another approach I should use to make this work?
You didn't provide much detail about what sort of information needs to be included in the subreport, but assuming it's a small amount of data (say, showing a personnel record), and not a huge amount (such as a persons sales for the last year), a List might be the way to go.
I tried to create a 'Fake'-Dataset with no sql query but just for iterating the id list, but it seems the dataset needs a data-source...
All datasets require a data source, though if you're merely hard-coding some fake return data, any data source will do, even a local SQL instance with nothing in it.
At my workplace there is a "Daily Feedback" database where details are entered of any errors made by Customer Service Officers (CSOs), such as who made the mistake, when, and what service it was for. this is so we can gather data which would show areas where CSO's are repeatedly making mistakes so we can feed this back to them and train them in those areas if need be.
i currently have a report where an CSOs name is entered along with a date range and it produces the report showing the number of errors made for each service for that date range.
the code used is -
=Sum(IIf([Service]="Housing",1,0))
=Sum(IIf([Service]="Environmental Health",1,0))
etc etc for each Service.
The problem i have is that not every CSO does EVERY service and so there are usually a few results showing as "0". and i cannot be sure if thats because they dont do the service or if they are just very good at that service.
Being absolutely useless at SQL (or any other possible way of fixing this) i cannot figure out how to HIDE the entries that produce the zero value.
any help here would be greatly appreciated!
Assuming you have a table with the fields CSO, Service, FeedbackComments you could modify the report record source to
SELECT [CSO], [Service], Count([FeedbackComments])
FROM [FeedbackTable]
GROUP BY [CSO], [Service];
Then services which have no records will not appear on the report.
I don't understand exactly what you want. But I want to mention you can use the COUNT() function along with SUM(). A count >0 will reveal if 0 means '0' instances or '0' errors.